Hi,
probably not the first time the question is ask... but!
I flash with cyanfox rom, the phone reset and stard loading with the cafox logo.... but nothing happend....
why I restart my phone,
this appear:
kernel is not seandroid enforcing
set warranty bit kernel
I try few things but nothing... the cyanfox start but wont load
what can i do??
Samsung S4 sgh-I337M
alex
Have you tried redownloading and clean flashing?
Sent from my Nexus 5 using Tapatalk
Related
Hi!
I just rooted my Samsung GT-I9505 a few weeks ago with Odin v3.07 and CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5.
Note that I didn't install any custom ROM.
It worked fine until now.
When I turned my phone off, it got stuck in reboot. The screen is black with a "Android OS is upgrading.. Opening all applications."
It's been 30mins and it just stayed there so I decided to take the battery off, put it back in and turn myphone on.
Now it's just stuck with the samsung logo. And whenever I factory reset and reset cache it, it just get stuck with a black screen with a "Android OS is upgrading.. Opening all applications."
Did I just bricked my phone? Is there any way to fix this?
Any help would be deeply appreciated. Thanks!
circlesnpigs said:
Hi!
I just rooted my Samsung GT-I9505 a few weeks ago with Odin v3.07 and CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5.
Note that I didn't install any custom ROM.
It worked fine until now.
When I turned my phone off, it got stuck in reboot. The screen is black with a "Android OS is upgrading.. Opening all applications."
It's been 30mins and it just stayed there so I decided to take the battery off, put it back in and turn myphone on.
Now it's just stuck with the samsung logo. And whenever I factory reset and reset cache it, it just get stuck with a black screen with a "Android OS is upgrading.. Opening all applications."
Did I just bricked my phone? Is there any way to fix this?
Any help would be deeply appreciated. Thanks!
Click to expand...
Click to collapse
Your device is not bricked so don't worry
1,
U flash philz recovery and do wipe cache / dalvik / fix permission and if req also reset the device it should reboot just fine
2,
Incase this does not wrk flash a pre rooted firmware from android development by djembey and reboot try with wipe cache after u flash and incase get stuck here also
Sent from my GT-I9505 using xda premium
123hiten said:
Your device is not bricked so don't worry
1,
U flash philz recovery and do wipe cache / dalvik / fix permission and if req also reset the device it should reboot just fine
2,
Incase this does not wrk flash a pre rooted firmware from android development by djembey and reboot try with wipe cache after u flash and incase get stuck here also
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
:laugh: Thank you! Wow! That's a relief! I thought I'm going to have an expensive paperweight.
Anyways, tried option number 1 and Flashed philz_touch_5.10.0-i9505.tar.md5. All went well until the reboot and it got stuck into the samsung logo. So I removed the battery, put it back on and tried to go to recovery settings (VOL UP + HOME + POWER) but then it continued to reboot and stopped at the samsung logo.
Note that earlier, before I flashed philz.. I can still go to the recovery settings.
Will now try the second option. Just another question though. By pre-rooted firmware, do you mean a Pre-Rooted ROM or the original stock rom? Seen them here --->
http://forum.xda-developers.com/showpost.php?p=42798412&nocache=1&z=4556388005148619
Am I on the right track?
If you want it rooted then use a pre-rooted rom or flash a stock rom then root again, your choice really...
i ugraded my XSA 4.3 official firmwate to BTU official firmware. everything is succesfull but now my phone is tuck on Android is upgrading screen. what should i do. please help
Hello there everyone,
I am really freaking out now. I was running CM10.1 on my Galaxy s4 and decided that I wanted to flash a stock samsung rom again.
Before the CM10.1, i had flashed I9505XXUDMH8_I9505OXXDMHA_BTU which has the knox thing
Now I tried flashing the same one by odin and it failed multiple times but then succeeded. My problem now is that it boots up to the animation logo and then stays stuck on the samsung logo. If i go to the recovery mode, I am welcomed with a dead android logo.
Please help me, will be appreciated!!
Thank You
LimitedStreak said:
Hello there everyone,
I am really freaking out now. I was running CM10.1 on my Galaxy s4 and decided that I wanted to flash a stock samsung rom again.
Before the CM10.1, i had flashed I9505XXUDMH8_I9505OXXDMHA_BTU which has the knox thing
Now I tried flashing the same one by odin and it failed multiple times but then succeeded. My problem now is that it boots up to the animation logo and then stays stuck on the samsung logo. If i go to the recovery mode, I am welcomed with a dead android logo.
Please help me, will be appreciated!!
Thank You
Click to expand...
Click to collapse
Hi,
Once you have flashed anything with the latest knox bootloader,you are only able to flash the same firmware or later.
Look HERE
Flash MH8 pre-rooted should get your phone back
Hey guys. I tried to find similar topic but I couldn't.
I'm facing a problem with my Galaxy S4 i9500. Around a mouth ago I flushed kitkat with odin. After that I rooted it. The phone was working properly until couple of days ago. It start freezing and restarting. 2 days ago couldn't start at all. Stuck on SAMSUNG logo. I tried to flash kitkat again , but it failed. I was able to flash CWM recovery 6.0.3.3-i9500 and clean the cache, delvik cache and tried to restore the manufacturer settings. After rebooting, I see Samsung logo. phone restart and stuck on the Samsung logo again.
Hopefully someone can help me out.
Thank you.
Doesn't sound like a software problem. I think you have some hardware failure. I don't think it's your power button though, otherwise you wouldn't be able to stay in download mode for more then a few sec.
That doesn't sound good. What hardware problem might be? The phone has never been dropped and always been in a case.
pmadzhurov said:
Hey guys. I tried to find similar topic but I couldn't.
I'm facing a problem with my Galaxy S4 i9500. Around a mouth ago I flushed kitkat with odin. After that I rooted it. The phone was working properly until couple of days ago. It start freezing and restarting. 2 days ago couldn't start at all. Stuck on SAMSUNG logo. I tried to flash kitkat again , but it failed. I was able to flash CWM recovery 6.0.3.3-i9500 and clean the cache, delvik cache and tried to restore the manufacturer settings. After rebooting, I see Samsung logo. phone restart and stuck on the Samsung logo again.
Hopefully someone can help me out.
Thank you.
Click to expand...
Click to collapse
Did you remove all knox related apps when you rooted?
I recommend..flash stock rom.
After that..flash philz and deknox script..
Then reroot via philz itself..(philz options reroot)
Sent from my GT-I9500 using XDA Free mobile app
Hello. This morning I decided to install a custom ROM on my S4 i9505. I installed Clockwork Recovery, installed CM12.1, but few hours after, I decided to go back to stock ROM, which I backed up entirely through Clockwork. After everything was restored, I booted up and my phone was stuck at SAMSUNG glowing screen. I managed to go back to recovery and tried to reinstall CM12.1 from backup but that didn't helped me eighter.......CM12.1 gets stuck ever earlier......at Samsung GT-i9505 screen and shows on top of the screen "kernel is not seandroid enforcing". What should I do now? Is this a "pretty" common problem or I'm fked? In this situation can I flash back stock ROM through ODIN?
Thanks in advice,
Andrei.
Solved bootloop, but now there is no Wi-fi
I've solved 1 stupid I did, I need to solve another one. I've told you guys that this morning I've installed Clockwork recovery. Now my Wi-Fi is not working and I think I changed the kernel this morning. Anyone can help me?
Thanks in advice.
Flash the ROM again. Sometimes it takes a couple flashes for the modem to properly work.
Strephon Alkhalikoi said:
Flash the ROM again. Sometimes it takes a couple flashes for the modem to properly work.
Click to expand...
Click to collapse
Solved the problem. Thanks for the help. Flashed another stock firmware and everything works.
Hey im back to android but I cant get the custom rom to boot. It keeps saying (Kernel is not SEANDROID ENFORCING) and it just stays there. I tried all the kernels from inside the rom(aroma) but non of them boot. I installed the nougat BL and Modem... maybe someone can tell me what im doing wrong. Sorry for my english.
EDIT: okay now with the stock kernel (KERNEL IS NOT SEANDROID ENFORCING) is gone but its still stuck at samsung galaxy s7 edge powered by android screen.
hi,i'm in the same problem.did you find how to solve it?
Kernel is not seandroid solved
After many times trying to install this rom and all the time getting stuck on boot logo and with kernel bla bla bla.i want to say first that other roms installed nice and easy.so in the menu aroma ,when you try to install you have option to install magisk or supersu.everytime i tried was left on magisk but after many many times being not succesfull i choose supersu instead and this time worked .after losing my time with this rom ,also crash and reboot when i tried to call somebody (first time in 10 years) and also the battery consumtion is very bad.20% in 1 1/2 hours.