I had my EXEC/uni stoped at the o2 boot image and freezed. so I used the varios methods here for updating the rom and the screen is with colors fuzzy colors , very strange ... so any one can help me please.
I can enter boot loader I dont know what rom I had... I am in Portugal so dont have O2 support
thanks
Have you successfully loaded the ROM even once?
I loaded the rom, then the congratulation screen apeared and I made the hard reset and the fuzzy colors apear... i am getting a little bit scared. it was working yesterday night and today.... freezed the boot.... i tried 3 difrent roms the qtek rom in the cd, in the webpage (my-xda), a rom from qtek in portuguese didnt work.
the light doesn't lit when I plug the wall charger... and I am affraid of use all the battery in the process of loading the roms...
I solved the problem installing the wm6 rom on it. and now it boots
me beri gapppy lol
I Have an orange branded touch dual, its unmodified in any way, i installed the spb mobile shell version 2.1 to the fone memory, i was playin arround with the tabs on the home screen trying to put my orange options in one of the tabs, i was given a warning that it wasnt compatible wiv this software but i acciently selected ok!!
now when i boot my fone up it boots to the home screen n then freezes the screen or the buttons wont work so im unable to navigate to the hard reset option, i tried to connect to active synk to flash a new rom but it connect 4 a second then disconnects
does anyone have any ideas how i can solve this problem or is my fone bricked? your help would me much apreciated
Solved !!!!!
Wooooooohoooooo av sorted it i found a thread at http://forum.xda-developers.com/showthread.php?t=415049 that told me how to hard reset it
Hi
I gave my Trinity to my daughter in Brasil when I bought my Diamond, at this moment she can't do anything whit itnot even a hard reset after a hard reset it enter in a white screen whit the HTC logo and stays there, I gues (and hope ) that the install file is damaged and would like to now or there is a possebility to boot whit a new rom from a memory card or to boot in any other way.
Thanks in advanced
Willem
Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!
Hy guys and first off all please excuse my awfull english (i`m from Romania).
Lets start...
A friend bought a Optimus 7 E900 and gave it to me for repair. I was thinking that was a soft brick.
The PHONE displayed Memory Card error. Tried to hard reset and no good. Tried to open it in Cold Boot mode no good.
I followed all turorial here on Xda and none of them worked.
First i`ve flashed the phone with the original Tim Italy firmware via LGDP2_V36_UMTS and after the 10 point where Reset is happening a error occures ( ErrNum 6 Open Port) and the phone does nothing ( just black screen after 20 minutes).
Tried almost all available firmwares found here and no cure for it.
Please Help Me !