Stuck into CWM after installing update - G2 Q&A, Help & Troubleshooting

After installing the update every time I try rebooting the phone it reboots into recovery mode and there is nothing to my knowladge that I can do. I saw the solutions for TWRP, but unfortunately I have installed CWM. My phone is only rooted and I haven't flashed any custom ROM.
PLEASE HELP!

Related

[Q] Recovery issue in JB 4.1.2

I was on 4.1.1 (rooted and CWM installed, no custom rom), I heard that the update was out so got the 31 MB update and installed it through CWM. At the time of rebooting system by CWM, I disabled the recovery flash. It rebooted normally.
But after I tried to reboot it into recovery, it just get into a double loop of google logo and then reboot in ADB. I flashed the recovery again using Google Nexus Toolkit 2.0.0 but had no luck on rebooting in recovery.
I flashed the recovery with clean update of 4.1.2 full new but no luck on recovery flashing after that too. Can anybody help or is there any other way to install recovery on 4.1.2??
Have you tried installing CWM with ROM Manager? That worked for me.
tariq_devil said:
I was on 4.1.1 (rooted and CWM installed, no custom rom), I heard that the update was out so got the 31 MB update and installed it through CWM. At the time of rebooting system by CWM, I disabled the recovery flash. It rebooted normally.
But after I tried to reboot it into recovery, it just get into a double loop of google logo and then reboot in ADB. I flashed the recovery again using Google Nexus Toolkit 2.0.0 but had no luck on rebooting in recovery.
I flashed the recovery with clean update of 4.1.2 full new but no luck on recovery flashing after that too. Can anybody help or is there any other way to install recovery on 4.1.2??
Click to expand...
Click to collapse
There are quite a few users experiencing the same problem...myself as well. There doesn't seem to be a fix for this issue. There are a couple of threads in the Q&A sub forum on the issue. Last I check no one has found a solution.
I have this exact issue as well.
This is a temporary fix: http://forum.xda-developers.com/showpost.php?p=32680976&postcount=10

[D802] Recovery Bootloop after OTA

I was on every thread that was talking about bricking LG G2 after OTA update and tried every solution, but it's still booting to recovery.
So, here's the thing:
After OTA update, my G2 got into recovery bootloop. I tried to wipe everything, to install new ROMs (CM11, SlimKat, Paranoid), none of them worked. After that flashed TWRP 2.6.3.2 and tried to flash with that - Nothing. Also, I can't get to download mode.
I'm out of solutions and ideas, so every help would be appreciate.

help pls. phone kept rebooting even in recovery

update:
i tried what you suggested, reflashing stock rom now. encountered same problem even in twrp, the phone reboots itself.
god help me i am trying to fix this for 2 days now.
=======
Here is the problem that i am encountering right now.
i am not sure what i am doing wrong, and this time whenever i flash something from recovery the phone reboots.
here are the things i did, using philz touch, i chose the install new rom (i do this everytime when flashing a new rom) then flash RR, was able to finish it but stuck in boot loop. so followed the same steps and flashed 2 other roms, infernus and halcycon (used these roms before) however before finishing the installation the phone reboots.
next step i flashed twrp via odin (success) and flashed the latest version via twrp recovery. guess what same problem, with RR it is stuck in boot loop while with other roms, it does not complete the installation. this thing never happened to me.
next step i used this adb thing and i believe it is successful, however same problem persists.
the only thing i can think of is to flash the original i9500 firmware which i am downloading right now and will flash it via odin. - did not work

[TWRP] [G900H] Recovery Flash Successful, But Still At Stock Android Recovery

Hi all,
My Samsung Galaxy S5 G900H, I updated it to stock Samsung Android 6.0.1. Now I want to root it. AS I've read in some of the other threads that flashing TWRPand then the latest SuperSU works. I went ahead and flashed TWRP using ODIN. Odin was successful and my phone rebooted and phone is working fine. But when I try to go into recovery, stock Android recovery pops up. I wonder why?? Can anyone point me out?
try this recovery you will be solved...
juz flash it with Odin 3.09
https://www.androidfilehost.com/?fid=24459283995296044
As rewards hit Thanks
Use twrp 3.0 by fevax i was had same problen but when u flash it reboot to recovery then to systen
I flashed this same recovery earlier. It is not working for me.
It's the same one I flashed earlier. Not working for me. Should I try to reflash the stock firmware and try again??
"flash it reboot to recovery then to system" Important point. This worked. Instead of rebooting directly after flashing. I flashed recovery, then removed battery to turn device off. Then rebooted into recovery. It WORKED.
I think rebooting into system first rewrites TWRP with stock recovery.
guru_iyer's Avatar
Edit
"flash it reboot to recovery then to system" Important point. This worked. Instead of rebooting directly after flashing. I flashed recovery, then removed battery to turn device off. Then rebooted into recovery. It WORKED.
I think rebooting into system first rewrites TWRP with stock recovery.

Phone stuck in bootloop!

So i started to update viper4android and i accidentally pressed volume up which tries it to install via AROMA now my phone is stuck on bootloop, it just keeps rebooting to recovery trying to install the viper4android, is there any possible way to get out of this or my phone is dead?
Any help will be appreciated,
TIA
a safe haven said:
So i started to update viper4android and i accidentally pressed volume up which tries it to install via AROMA now my phone is stuck on bootloop, it just keeps rebooting to recovery trying to install the viper4android, is there any possible way to get out of this or my phone is dead?
Any help will be appreciated,
TIA
Click to expand...
Click to collapse
You didn't specify your exact phone model, so assuming KLTE
AFAIK aroma does not work well with our TWRP
Can you pull the battery and then boot directly to recovery so you can wipe system/cache/Dalvik and then flash the ROM again?
If recovery is messed up, can you pull battery, then boot to download mode so you can reflash TWRP in Odin/Heimdall, or better yet flash latest stock Rom (caution if you have a g900V/A with stock locked bootloader) in Odin/Heimdall, followed by TWRP?
Post again if you need more help, and try to include as many specifics as possible eg exact phone model, TWRP version, Rom zip filename, Gapps, etc. I'll try to help if I can
I am very sorry for not posting the model number, mine is G900I (KLTEDV), everytime i turn on the phone it just keeps booting onto the recovery and goes to install the viper4android but it fails to do that and reboots again and again, its impossible to do anything basically, not booting onto the rom or anything. Recovery version is TWRP 3.2.2-0, it opens up directly to the zip file which is viper4androidfx-aroma.zip and tries to flash it and crashes and the whole process starts again, pulling the battery didnt break the chain it just keeps rebooting to do that again!
I reflashed a new twrp recovery ver 3.2.3-0, but it still tries to flash that zip file again! Even after deleting the file itself it still tries to flash it and keeps rebooting!
How do i get rid of this twrp loop!? This is so weird!
P.S: After reflashing twrp the phone boots to the rom normally but i cant access recovery anymore, whenever i go to recovery it goes on in an infinite bootloop (cleared cache and dalvik cache using es explorer root), I am also on LineageOs 16.0, tried stock recovery but the stock recovery also keeps bootlooping.
P.S this viper4android is a magisk module!
NVM, solved it by flashing stock rom! Thanks!

Categories

Resources