Database Users

My Acer NeoTouch s200 is dead

Hi im from Germany,
i tried to flash my Acer S200 but it stopped by 50% and i have pluged the cable out. I cant turn it on, it gives no signal, i cant bring it to the download mode. Nothing is working no hardreset with buttons.Nothing is working and when i plug it to usb the LED isnt blinking
Sorry for my bad english ..
my phone is new, it has garanty, should i contact the acer support or can anyone help me ?

Hold volume up/vol down button + reset until you see "clean boot"

i tried it the phone gives no signal .. no clean boot is coming .. the rom flashing was at 50% i think it is breaked
but thank you

did you try removing then replacing the battery. then try bootloader mode again?

yes i tried but nothing is working i cant enter the bootloader nothing is working it is just off no vibration nothin is working

sorry, but I have to ask, are pressing then holding vol down +power +camera buttons
at the same time until blinking red light starts?
you have to get into bootloader mode then flash a custom rom
brainmaster has a few including a "clean" rom.
I had this happen awhile ago and tried so many things for 2 days that now I don't
remember what actually worked! But I don't think that your S200 is bricked.

Also, make sure that you keep the power cable pluuged in (not usb)
you need a good charge even if you don't see the green light.
just keep trying and if I can remember I let you know.
or someone here will help you to find a solution!

thank you for your help but there is no light blinking. Also when i plug it to charge no light is going on. it doesnt charge the battery. i hope you can remember
i already know how to flash a rom but the phone doesnt give any sign

sorry I can't remember but you should ask brainmaster and maybe he can really help.
And he speaks german= )

thank you i will send him my problem

Any solution
Hi. I kind of found myself in the same situation. My acer s200 is unresponsive, no blinking lights no matter key/reset combinations. Had been in the middle of flashing on a new ROM when it got accidentally disconnected.
Any possible solution? Already checked the battery out in a different phone and it's fine and charged.

Hey,
i don't want to looks like a vultur, but if some of you can't find a solution to resolve the problem you have, I'm interested by the device because I need some piece. Of course I hope you can resolve your problem but if there are no led blinking, the last possibility is to send it to acer, and if you don't want to wait/pay/or whatever to with the acer support, I'm interested by your device.
Arto

Vulture indeed!! I'm need of help man.

you still need help?????

Hey GarcoG. Yes, still in need of help. My S200 is currently a desktop paperweight at home. It's a beautiful paperweight but it was made for so much more. Would really like to get it up and running again.
A new thing I noticed. I'm able to charge my phone's battery to full on my friend's s200. Of course when I put it back into my phone, it's still completely unresposive. However, I noticed that whenever I put it back into my friend's phone, the charge on it has reduced. I'm pretty sure it's not a battery issue I have since my phone is still unresponsive with my friend's battery in it and the same happens with that battery as well.
Would really appreciate any ideas on fixing this.

Hi, count me in. I just jumped on your wagon.. will try to disassemble this beauty soon before I officially demote it to a shiny paperweight.. well it's not that shiny, i put on a matte screen protector on it

Really funny about that matte screen protector. Cannot wait for the results. In my case, phone got accidentally connected just as it had reached the stage of flashing on the new ROM. Was thinking it was probably unresponsive because the ROM instructions that enable it respond to key combinations are absent hence cant get it into Bootloader mode.
@ incognito_tkd: Any luck with the disassembly? Would like to know your findings.

I have same problem... same situation
But... when I connect my USB charger, it shows red LED on... as if the charging is ON. But no reaction
Any one help please

there is no possibility to repair the phone... you have to send it to acer !!
i got my phone 1month after i´ve send it

Bricked/Damaged Phone ??

Hi, i bought an HTC Dream/Google G1/T-Mobile G1. I bought as faulty and asked the guy what did it had. He said he needed to flash and update software. So i bought it thinking that if that's the problem i'd solve it and end up with an Android phone. I paid €50 for it. Thing is i can't do anything to the phone. I plugged the battery, pushed power and it gives the normal vibrate and then nothing, the screen doesn't even light up. I have to take the battery out to power off the phone then. If i plug the USB, it lights the red LED, but no recognition of the phone by the PC, turn it on again...the same.
I've searched the forum, top to bottom, and i've tried almost everything to try and make something out of my beautyfull brick. Keys combination, *.img to SD, haven´t tried throwing it to the wall, but i'm almost there.
If i could even get to bootloader... I have a Diamond and flashed it numerous times and never had a glitch.
Can you guys help out ? Please, i've searched the forum, read almost every post about bricked phones, etc...

Sounds like they may have flashed the wrong firmware file or its physically damaged and they lied to you.
I am pretty sure it needs re-flashed with a jtag interface if it's only a software issue. Because if the recovery image is intact it will still say "t-mobile G1" and be stuck in a boot loop.
Have you tried to start the phone to fastboot mode(hold down the back button and press power), or recovery(hold home and press power) ?
If you can't get into either of those you either need to find someone with a jtag adapter or get your money back because it's dead.

Thanks for the reply.
I tried all of that... . How on earth will i find someone with a jtag adapter, at least in a nearby area... guess i have nice brick then. I read somewhere here on xda of a shop in India that recovers the phone but its way to far for me to send the phone, pay the fix and they send it back!!! Well i guess thats it, i got screwed...

[Q] GT-i9500 stuck on boot loop. goes into download mode but reboots. no recoveryu

Hey,
I've searched this forum on others but haven't found anyone who've had my problem.
I have an original GT-i9500 purchased a little over a year ago around the launch. The phone was rooted and had a custom ROM installed. (Crash ROM). I have installed the ROM about 3 months ago, and haven't fiddled with it recently. I've had CWM installed.
Yesterday I've noticed that the device went into boot loop all of the sudden. I haven't done anything unusual when it started boot looping.
I can see the Samsung logo for a couple of seconds, but then the screen turns off and the logo comes again. Loop. Trying to enter recovery mod (CWM) doesn't work. Phone keeps looping. Trying to access download mode does work partially. I can get to the screen where it says "Warning!!" and asks to click "volume up" to continue. But stays on that screen for a few seconds and then boots to the logo again. Happens whether I click "volume up" or don't.
I have no idea what caused this. But shortly before it started I did see that an app that uses wanam was updated (bubble UPNP) and there was some notification about it from wanam.
any help would be greatly appreciated. Thanks!

You have eaither a malfuntioning power button, a faulty battery or some other hardware failure.
This is not a software problem.

Lennyz1988 said:
You have eaither a malfuntioning power button, a faulty battery or some other hardware failure.
This is not a software problem.
Click to expand...
Click to collapse
I have exactly the same issue, tried plug in power supply, shows an empty battery icon with circle in the center, stays for a few seconds and screen goes blank. It repeat this process if i keep it plugged to the power supply.

Just an update in case anyone ever finds this thread and is experiencing the same symptoms. It was indeed a faulty power button. Having it replaced has solved the problem.
It was apparently stuck on "pressed" mode (not physically, i would've noticed that). Another indication for that was that putting in a battery would automatically turn the phone on.

i know it was before a few months back,
but anyway... i got the same issue too, but my phone was on stock rom without root.
this is random annoying issue...
as i understand from you guys, i will need to take the phone to a lab to fix this, bummer!
thank you any way...

same problem here..
just got this issue today.. cant go in download , cant go in recovery, wont boot...
i was using it just fine when it just turned off...

ShoukaT1 said:
same problem here..
just got this issue today.. cant go in download , cant go in recovery, wont boot...
i was using it just fine when it just turned off...
Click to expand...
Click to collapse
Whiplash83 said:
i know it was before a few months back,
but anyway... i got the same issue too, but my phone was on stock rom without root.
this is random annoying issue...
as i understand from you guys, i will need to take the phone to a lab to fix this, bummer!
thank you any way...
Click to expand...
Click to collapse
Faulty power buttons, faulty power buttons everywhere.
I fail to understand how samsung does this. This has been like the 500th stuck power button issue here.
Looks like we have to add it in the guide.
Sent from my GT-I9500 using XDA Free mobile app

DeepankarS said:
Faulty power buttons, faulty power buttons everywhere.
I fail to understand how samsung does this. This has been like the 500th stuck power button issue here.
Looks like we have to add it in the guide.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
I've got my phone back from the repair service and it was indeed a failure of the power button electric circuit,
(i don't know exactly how to translate it correctly to English, but they say something about secondary electric circuit board)
anyway, it been replaced and the phone came back to live again

I got it fixed today..
I think it should be added as a major cause for bootloop, if you cant open recovery or go to download mode
at first i thought my phone was bricked but then after some hard searching i found out this thread and proceeded accordingly..
I opened up at the phone and checked the power button myself with my instruments.. then i took it to repair center and told them to replace the power button... simple as that.. cost me 9$

grobrnik said:
Just an update in case anyone ever finds this thread and is experiencing the same symptoms. It was indeed a faulty power button. Having it replaced has solved the problem.
It was apparently stuck on "pressed" mode (not physically, i would've noticed that). Another indication for that was that putting in a battery would automatically turn the phone on.
Click to expand...
Click to collapse
Thanks for the clarification! My S4 has been doing that for a while now- think I'll take it to the repair center and get it checked out.

I have same problem

LG G2 D802 - Power Button Problem

Hey everyone,
First of all thank you for taking a look in my thread, this is my second post here in this forum but, I just have to tell you guys, I've been around since 2012 and you guys rock!
Anyway enough of chit chat, so I had my phone pretty much hard bricked, thanks to some tutorials I've finally found a way to get it back to life BUT ( there's always a but ), it isn't like before, everything was working very nicely after the fix, the Power button stopped working, the volume rockers are still fully functional but the power button isn't. So I thought "f*ck this, I gotta buy a new flex assembly", that's what I did, it arrived today, so I got to work and put it all together with the new button, but for my surprise it is EXACTLY de same as before, so it seems like it has nothing to do with the flex assembly/buttons itself but something more like motherboard or something..
Have any one of you guys had this issue? By the way another very interesting thing is that the buttton "still gives signal" since if I press on it, it doesn't do anything even with the phone off BUT, if I have the phone turned on, and I press it for 5+ seconds , it shutdowns the phone as it should! So why isn't it working when I do a press, but if I hold it works?
By the way my phone when died even the partition table got corrupted, so I even had to redo that could it have anything to do with it?
Oh and the basic tips of putting the phone in Download Mode and fully revert to stock didn't work, already did it many times since I brought it back to like..
Regards, and thank you for reading this LONG post and spending your time with me :silly:

Anyone got any clue please?..

SlashPT09 said:
Anyone got any clue please?..
Click to expand...
Click to collapse
Hi, i has been a long time until you wrote this topic, but now, in 2018, i got the same problem that you.
I bricked the phone, unbricked with some xda's tutorials, install a kdz image and system got ok, but the damn power button not work.
It work on a very specific moment that is when the phone is on and i press the button, after 5 seconds the phone turn off, but none menu appears, it just turn off. Besides, it won't work to turn on the device. In this case, i aways need to put the cable and when the LG log appears I must remove (if not, the battery symbol is shown, and the device not turn on).
I wonder if you were able to fix your phone or someone of xda had this problem.
Thanks

Nope never got it fixed just moved on and bought another device, besides that is now a outdated device..

LG G2 not turning on/bricked?

Hi guys,
I have a problem with my LG. Yesterday i was casually lurkin some internet or whatever. Havent done anything suspicious or something. Then i switched phone off and put it for a while on the side. When I tried to unlock it after that it was impossible. Phone just doesnt respond. I havent rooted it or done anything connected with roms etc, not into this stuff really. When i plug it into charger red LED starts blinking, then LG logo appears, then battery icon and after that its just charging like normally and still red LED lights. Right now its fully charged so instead of red, the LED is green. The buttons combinations dont work neither (hold power,hold power and vol-) besides holding vol+ and power. I have to hold it for a while, then plug into charger and then some kinda download menu appears, but it does nothing too. Still cant start the phone. However few hours ago i just tried holding power for a bit and everything worked perfectly. Then i locked the screen and *bam* bricked again. I know there are many topics like that but i havent found the exact same problem with solution yet. Every help would be highly appreciated. :good::good:

BUMP please any advice. It actually Turner on one more time, but when i tried using power button, at first it didnt respond, then after few seconds it went bricked back. I managed to take off the backcover so maybe there is sth i can do?

I could be wrong but sounds more software related then hardware to me, maybe try to use one of that flash tools or pc suite to do a clean flash and sadly lose all your data.
If that doesn't help idk....
You don't have a backup do you?

No, unfortunately i dont. I didnt expect that to happen.

Yo so I actually managed to turn it on (i ve no idea how) and its working fine. Im scared to press the power button so it will be unlocked all the time. Ive already done the general backup of photos, music etc, but if there is some good app to make solid backup or something please let me know.
Soo is there any other option to find out if it is finally repaired than pressing power button? I can access data on PC so maybe theres the way to fix it now? If i press the button probably it will brick again, and then after couple of days it will suddenly start working, so id rather dont do this..