Database Users

[Q] Bootloader and roms

I just had a question to ask, since I have not found a sound answer on my issue. I have a Verizon galaxy s4 and it is rooted. I want to install a custom rom but I dont know if I need to unlock the bootloader? Also which roms do youll suggest and like?

I think there is a different section for verizon s4
---------- Post added at 08:33 AM ---------- Previous post was at 08:31 AM ----------
You will find ur answeres there

ferndchamp said:
I just had a question to ask, since I have not found a sound answer on my issue. I have a Verizon galaxy s4 and it is rooted. I want to install a custom rom but I dont know if I need to unlock the bootloader? Also which roms do youll suggest and like?
Click to expand...
Click to collapse
There is a separate thread of Knox(so called bootloader) read it. Do you have custom recovery or stock? which method did you used for rooting? pls specify for further guidance.

I am in build mk2. I am using room manager and in that am using clock work recovery. I used this page to root http://forum.xda-developers.com/showthread.php?t=2565758
I think it's a safe root so it says. I am trying to learn little by little any help will be greatly appreciated.
Sent from my SCH-I545 using Tapatalk

[Q] I'm rooted...now what?

So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!

If you need to ask these questions you should not have rooted. Look in the general forum.
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
If you need to ask these questions you should not have rooted. Look in the general forum.
Click to expand...
Click to collapse
I freely admit that I'm new to this, so no reason to point that out. There are other reasons to root besides flashing custom ROMs, and I don't see any reason why I shouldn't have rooted. Every time I look through threads for my build, people just say that it can't be rooted (which is obviously no longer the case, since I'm successfully rooted). I just want to know what kind of capabilities I should look into, and as I understand it, the best way to do that and start tinkering is by using Safestrap.

Safestrap will allow you to flash touch wiz based roms. What firmware are you on?
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Safestrap will allow you to flash touch wiz based roms. What firmware are you on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I'm running 4.4.2, Kernel 3.4.0-1125940.

go4bacon said:
I'm running 4.4.2, Kernel 3.4.0-1125940.
Click to expand...
Click to collapse
What's your baseband?
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
What's your baseband?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I think it's I337UCUFNC1.

go4bacon said:
I think it's I337UCUFNC1.
Click to expand...
Click to collapse
You're on nc1 firmware. Look for this http://forum.xda-developers.com/showthread.php?p=51067706
Sent from my Nexus 5 using XDA Free mobile app

go4bacon said:
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
Click to expand...
Click to collapse
Safestrap 3.72...
https://www.dropbox.com/s/udgft6eu2d0fv8r/Safestrap-JFLTE-3.72-kk-B01.apk
Make sure you read read read.
After flashing a rom such as Goldeneye inrecovery dont reboot system go back to the home and flash the proper kernel modules and super user.zip. If on golden eye..As far as i know you cannot flash custom kernels

spirodave said:
Safestrap 3.72...
https://www.dropbox.com/s/udgft6eu2d0fv8r/Safestrap-JFLTE-3.72-kk-B01.apk
Click to expand...
Click to collapse
This is so frustrating. I installed the .apk successfully, but tapping "Install Recovery" doesn't seem to work. I get a "Installation Complete" pop-up, but it still shows as uninstalled and I can't boot into SS. I haven't heard of anyone having this problem before.

go4bacon said:
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
Click to expand...
Click to collapse
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
go4bacon said:
This is so frustrating. I installed the .apk successfully, but tapping "Install Recovery" doesn't seem to work. I get a "Installation Complete" pop-up, but it still shows as uninstalled and I can't boot into SS. I haven't heard of anyone having this problem before.
Click to expand...
Click to collapse
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
spirodave said:
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
Click to expand...
Click to collapse
These are links .
http://forum.xda-developers.com/showthread.php?t=2692825 this is for Nb1_Stock_Rooted
http://forum.xda-developers.com/showthread.php?t=2663545 this is to downgrade
If all else fails then downgrade and get to stockrootednb1. You should have no issues using safestrap with NB1

spirodave said:
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
These are links .
http://forum.xda-developers.com/showthread.php?t=2692825 this is for Nb1_Stock_Rooted
http://forum.xda-developers.com/showthread.php?t=2663545 this is to downgrade
If all else fails then downgrade and get to stockrootednb1. You should have no issues using safestrap with NB1
Click to expand...
Click to collapse
Lmfao or you could get SELinux Mode Changer and set to permissive and not go through any of that and safestrap will install perfectly on 4.2.2 NC1

dude52 said:
Lmfao or you could get SELinux Mode Changer and set to permissive and not go through any of that and safestrap will install perfectly on 4.2.2 NC1
Click to expand...
Click to collapse
Thought NC1 was 4.4.kklmao on this end now
But good to know ..So SElinux mode changer will fix the safestrap issue on NC1 ?. could have saved me a whole night .. I have been cramming all this info in in one week bieng i just bought this device .. Gues that is what happens reading outdated threads.. Coming from a tmobile gs2 flashing world to this BS locked boot loader has been an experience .. What next your gonna tell me i can install a custom kernel to over clock with this Bl. Can I? lol..No but im serious

Hey, OP. Did you get everything working? I was curious if you got ss 3.72 working on NC1. I need to reflash my ROM (Hyperdrive RLS16) and was thinking I would update from NB1 to NC1 during the process if it was possible. Thanks.

SELinux Mode Changer fixes SafeStrap for NC1
Guedeaux said:
Hey, OP. Did you get everything working? I was curious if you got ss 3.72 working on NC1. I need to reflash my ROM (Hyperdrive RLS16) and was thinking I would update from NB1 to NC1 during the process if it was possible. Thanks.
Click to expand...
Click to collapse
Works fine. Just finally rooted my S4 and TWRP backed up without having to wipe/reload/restore anything at all.
TowelRoot + Safestrap-JFLTE-3.72-kk-B01.apk + ModeChanger = easy peasy Root & Restore

[Q] Verizon N900V Note 3 - What recovery will work with 4.4.2?

Phone is rooted via Towelroot. I have tried literally every recovery I can find. CWM, Philztouch, TWRP, etc. Most of them fail when I try to flash them with Odin, Safestrap simply doesn't install. What am I missing?

Safe Strap is the Only recovery for this device. It appears that the NC4 Kernel is keeping you from flashing in recovery. Look on the lats two pages of the SS thread (look for post 1240) and it will give you the proper information.
Sent from my SM-N900V using Tapatalk

phillymade said:
Safe Strap is the Only recovery for this device. It appears that the NC4 Kernel is keeping you from flashing in recovery. Look on the lats two pages of the SS thread (look for post 1240) and it will give you the proper information.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
OK, I finally got SafeStrap to work - not sure what I was doing differently this time but it worked. Got into SS bootloader, but now any ROM I try to flash, the phone goes to a black screen and locks out (have to yank battery) after the flash completes and I reboot. It goes to a black screen (off) 10 sec after the Safe Strap enabled screen. The last ROM I tried was the latest Hyperdrive which is supposed to be 900V 4.4.2 compatible?
Thanks again!

dubseven said:
OK, I finally got SafeStrap to work - not sure what I was doing differently this time but it worked. Got into SS bootloader, but now any ROM I try to flash, the phone goes to a black screen and locks out (have to yank battery) after the flash completes and I reboot. It goes to a black screen (off) 10 sec after the Safe Strap enabled screen. The last ROM I tried was the latest Hyperdrive which is supposed to be 900V 4.4.2 compatible?
Thanks again!
Click to expand...
Click to collapse
You are correct, it is 4.4.2 compatible. But its NC2 compatible. My apologies, I see you rooted with safe strap so this means you are on the official OTA NC4 witch contains the new kernel. This is why you can not flash anything. Go to this thread, and start at post #1244 this wil help get you in the right direction. http://forum.xda-developers.com/showthread.php?t=2517610&page=125
Hope this helps, and good luck

Safestrap can only flash to stock ROM at the moment until SafeStrap 3.75 comes out
Sent from my SM-N900V using XDA Free mobile app

Thanks and a Q
phillymade said:
You are correct, it is 4.4.2 compatible. But its NC2 compatible. My apologies, I see you rooted with safe strap so this means you are on the official OTA NC4 witch contains the new kernel. This is why you can not flash anything. Go to this thread, and start at post #1244 this wil help get you in the right direction. http://forum.xda-developers.com/showthread.php?t=2517610&page=125
Hope this helps, and good luck
Click to expand...
Click to collapse
I appreciate your help here. I wanted to check whether this will work on the Verizon Note 3 (SM900VVRUCNC4) Is this "NC4?"
I'd like to get to a point where I don't have to keep deferring the next google push-up. I'm a noobie. I flashed custom roms on my S3 but I can't remember how. I might have gotten TWRP working on it....for my Note 3 I just want to be able to try different roms and stay clear of google/verizon and whoever else is trying to control MY phone. I'm not cavalier about the tech. It's just that I'm learning GIS and Linux and earning a living. So I can use all the generosity I can find here.
---------- Post added at 10:39 AM ---------- Previous post was at 10:16 AM ----------
Eddie Del said:
Safestrap can only flash to stock ROM at the moment until SafeStrap 3.75 comes out
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
What is Jasmine rom 1.6?

alt230 said:
I appreciate your help here. I wanted to check whether this will work on the Verizon Note 3 (SM900VVRUCNC4) Is this "NC4?"
I'd like to get to a point where I don't have to keep deferring the next google push-up. I'm a noobie. I flashed custom roms on my S3 but I can't remember how. I might have gotten TWRP working on it....for my Note 3 I just want to be able to try different roms and stay clear of google/verizon and whoever else is trying to control MY phone. I'm not cavalier about the tech. It's just that I'm learning GIS and Linux and earning a living. So I can use all the generosity I can find here.
---------- Post added at 10:39 AM ---------- Previous post was at 10:16 AM ----------
What is Jasmine rom 1.6?
Click to expand...
Click to collapse
It is the NC4 based Custom ROM

Need support rooting samsung verizon galaxy s5 sm-g900v 4.4.4

Hello, before now i have rooted htc my touch 4g and moto razr xt912 i have also installed a couple of roms on both those phones so i am familiar with rooting and installing roms.
But I had no idea that rooting and installing roms on galaxy s5 will be this tricky so please bear with me as i tell you guys what i know so far. So i know that geohot's towelroot apk isn't working on my phone because it is of a higher firmware right? So what i need to do is downgrade my phone to a version that makes the towelroot apk work right?
The things I'm having major issues understanding are what is samsung knox exactly? also what is the full form of NE9 and N12? I also realize that i cant install clockword mod recovery so what should i use to back up the current rom on my phone incase i mess up?
Please point out if I'm asking the wrong questions and any and all help is very much appreciated so thanks in advance.

I'm guessing your not using a dev edition s5 so your bootloader is locked and also guessing your on the nk2 build (find in settings/about phone...), correct?
---------- Post added at 01:52 PM ---------- Previous post was at 01:41 PM ----------
Also what is your end goal? Ex. Looking to be rooted on lollipop with the native tether app working. If so you simply need to downgrade your kernel, use towel root v3, install busy box then safestrap, update SU and re flash the kernel you started with. That will bring you right back to where you are now but with root and ability to make a back up. Detailed explanation with software links found here, http://forum.xda-developers.com/showthread.php?t=2784880
---------- Post added at 01:59 PM ---------- Previous post was at 01:52 PM ----------
Just scroll down to "How to root NK2" and follow the instructions step by step. All the links for the software you need are below that. Just make sure you have a copy of the kernel you have now to flash back to after your done with the downgrade, root, and safestrap install. Also don't worry to much about screwing up Odin is going to be your new best friend and there is a copy of the original software on that page to restore your phone from a softbrick

Mad.Matt said:
I'm guessing your not using a dev edition s5 so your bootloader is locked and also guessing your on the nk2 build (find in settings/about phone...), correct?
---------- Post added at 01:52 PM ---------- Previous post was at 01:41 PM ----------
Also what is your end goal? Ex. Looking to be rooted on lollipop with the native tether app working. If so you simply need to downgrade your kernel, use towel root v3, install busy box then safestrap, update SU and re flash the kernel you started with. That will bring you right back to where you are now but with root and ability to make a back up. Detailed explanation with software links found here, http://forum.xda-developers.com/showthread.php?t=2784880
---------- Post added at 01:59 PM ---------- Previous post was at 01:52 PM ----------
Just scroll down to "How to root NK2" and follow the instructions step by step. All the links for the software you need are below that. Just make sure you have a copy of the kernel you have now to flash back to after your done with the downgrade, root, and safestrap install. Also don't worry to much about screwing up Odin is going to be your new best friend and there is a copy of the original software on that page to restore your phone from a softbrick
Click to expand...
Click to collapse
Well my build appears to be n12 and yes the bootloader is locked on my verizon galaxy s5.
I'm looking to root my phone and remove all verizon apps and try the roms that are available. So how can i downgrade my kernel and back up my current rom? do i have to use odin? is there a specific version of odin software for galaxy s5?
Thanks a lot for your reply.

Start with following that link I gave you and get rooted install busy box and safestrap then up date your SU and flash back to your existing kernel make a backup and you can go from there with no fear ...
Sent from my SM-G900V using Tapatalk

Mad.Matt said:
Start with following that link I gave you and get rooted install busy box and safestrap then up date your SU and flash back to your existing kernel make a backup and you can go from there with no fear ...
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
The correct order would be get root with towelroot, install supersu from playstore, update it's binaries. Reboot, then install busybody and lastly safestrap.

Yes and no I prefer to use safestrap to install the SU update rather than playstore which you will find in the instructions I provided with the link ... just follow them explicitly and you will find a quick and easy solution to your request ... not to mention the fight with fc you have to endeavor to do it his way ... but I digress. Don't take it from just me, follow the links instructions and ask any questions you need to along the way
Sent from my SM-G900V using Tapatalk

Thanks a lot for the help that was provided to me I am happy to announce that because of you guys assistance I was able to root my phone, thanks again.

Newbee with a question
Hi, I'm Maypo1, Ihope I'm not out of line in this forum,but I read it and have 1 question. I have an S5 SM-900V Kit Kat 4.4.4 with firmware ending in ANK7,because I had a fat thumb and mistakenly downloaded the first of 2 downloads to Lollypop. ? does this screw up my chances of downgrading and rooting to N12 or NGC I have already downloaded odin 3.10, and both roms from SamMobile on my laptopand am ready to try this all out.
Thank's in advance Maypo1

Maypo1 said:
Hi, I'm Maypo1, Ihope I'm not out of line in this forum,but I read it and have 1 question. I have an S5 SM-900V Kit Kat 4.4.4 with firmware ending in ANK7,because I had a fat thumb and mistakenly downloaded the first of 2 downloads to Lollypop. ? does this screw up my chances of downgrading and rooting to N12 or NGC I have already downloaded odin 3.10, and both roms from SamMobile on my laptopand am ready to try this all out.
Thank's in advance Maypo1
Click to expand...
Click to collapse
I think you should create a new thread to ask a question.

[Q&A] US Cellular Galaxy S5 [SM-G900R4]

Q&A for US Cellular Galaxy S5 [SM-G900R4]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for US Cellular Galaxy S5 [SM-G900R4]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

stuck at android boot screen Samsung Galaxy S5 SM-G900R4 (US Cellular)
hey folks
Successfully rooted My Samsung Galaxy S5 SM-G900R4 (US Cellular) with CF-Auto-Root then i messed that up installing a rom that probably wasnt compatable with my device. so I went to install the stock firmware. and that didnt work odin said fail and im stuck with my phone's not working. its stuck on android boot screen. and wont do anything else.

Root
Does any one happen to know what roots are available for g900r4 on 5.0?

zaduro said:
hey folks
Successfully rooted My Samsung Galaxy S5 SM-G900R4 (US Cellular) with CF-Auto-Root then i messed that up installing a rom that probably wasnt compatable with my device. so I went to install the stock firmware. and that didnt work odin said fail and im stuck with my phone's not working. its stuck on android boot screen. and wont do anything else.
Click to expand...
Click to collapse
Did you back anything up in your custom recovery? Even if you didnt check backups in recovery or factory reset. Did you wipe cache, dalvik, and everything for the rom, did you dirty flash?
Sent from my SM-G900R4 using Tapatalk
---------- Post added at 04:32 PM ---------- Previous post was at 04:27 PM ----------
Jasonhtb said:
Does any one happen to know what roots are available for g900r4 on 5.0?
Click to expand...
Click to collapse
Yes, I just updated to stock LP 5.0 via odin and then rooted and flashed custom recovery. I used the CF-auto-root (for G900R4) method on odin and flashed Philz 6.26.2 for custom recovery. Make sure under settings/security you have the "Reactivation Lock" box-unchecked.
Sent from my SM-G900R4 using Tapatalk

Is cf auto root safe... I've seen people use it and they get stuck at the end part where its on the red Android logo
---------- Post added at 07:30 AM ---------- Previous post was at 07:26 AM ----------
If I flash the cf auto root file do I have to flash the recovery I just want root to remove bloatware and use greenify

Samuel.v said:
Is cf auto root safe... I've seen people use it and they get stuck at the end part where its on the red Android logo
---------- Post added at 07:30 AM ---------- Previous post was at 07:26 AM ----------
If I flash the cf auto root file do I have to flash the recovery I just want root to remove bloatware and use greenify
Click to expand...
Click to collapse
It is safe and will root your phone with out issue. Of course you could always just go with the standard "flash recovery in Odin and flash Supersu in recovery". Simple.
Sent from my SM-G900R4 using Tapatalk

Thanks I will try cf auto root , I hope it'll work with android lollipop

How would I go back to the stock lollipop ROM... I'm really confused my baseband version is BOG2 and I'm currently on ressurecion ROM remix... The problem is I don't have a CSC or PDA version number... Do I just flash the BOG2 version please help

Samuel.v said:
How would I go back to the stock lollipop ROM... I'm really confused my baseband version is BOG2 and I'm currently on ressurecion ROM remix... The problem is I don't have a CSC or PDA version number... Do I just flash the BOG2 version please help
Click to expand...
Click to collapse
Download the latest firmware for our devise. It is a tar.md5 file. Open Odin. Connect your phone. Place the .tar.md5 file in the PDA section. Click start. Done.
Assuming you have Odin and drivers installed correctly.
Sent from my SM-G900R4 using Tapatalk

I'll give it a try thanks which version of Odin should I use
Edit 2: Never mind I put a lot of thought into this I might just stay on my custom ROM.... This is the only phone I have for 14 months then I will maybe get a new one, I really don't want to screw this up, I'll be stuck with a flip phone for 14 months

Samuel.v said:
I'll give it a try thanks which version of Odin should I use
3.10
Sent from my SM-G900R4 using Tapatalk
Click to expand...
Click to collapse

I download the latest one right BOG2 ???
I'm very concerned about doing this because I read in another thread, same issue that happended to my phone it ended up getting stuck on the us cellular 4g LTE screen and wouldn't do anything... After the guy flashed the stock ROM the phone was still stuck on the same screen after clearing the cache and factory resetting. I don't want this happening to my phone

Samuel.v said:
I download the latest one right BOG2 ???
I'm very concerned about doing this because I read in another thread, same issue that happended to my phone it ended up getting stuck on the us cellular 4g LTE screen and wouldn't do anything... After the guy flashed the stock ROM the phone was still stuck on the same screen after clearing the cache and factory resetting. I don't want this happening to my phone
Click to expand...
Click to collapse
Unless you flash firmware that is not compatible with our devised and you're using the latest firmware for our devise, along with the correct version of Odin, you will have no issues.
Sent from my SM-G900R4 using Tapatalk

Honestly don't know if I want to go back to stock now found a really stable custom ROM

I was recently given this phone, on it Anroid 5.0
im finding its both a good an bad thing lol.
Are the us cellular links for 5.0 android correct?
Samsung doesn't have an unlocker but seemed to have the rest

Im a newb but from what i noticed upon writing all my phone info down, and correct me if im wrong but it looks to be that if you know your boot loader snd region of world the phone is from you can figure out that Your PdA is exactly the same az your bootloader and
The CSC is identical to pda EXCEPT for the 3 letters after G900R4 _ _ _
Those are your Country of origin or region

I lost my root. Tried using Mobile Odin and checked the everroot. But apparently it did not work. My problem is I want to go back to 4.4.2 stock firmware and I do not have a pc or mac at the moment. Can I use the stock 5.0 recovery to flash back to 4.4.2?

Mine may not be 100% on the authentic side. I just learned that the person who gave it to me got it from a rep at a t-mobile store because an anon customer had left it at the store stating that it had been reported stolen.. and it needs to be unlocked from Us Cellular
Sent from my SM-G900R4 using Tapatalk
---------- Post added at 08:49 PM ---------- Previous post was at 08:46 PM ----------
I have a few discrepancies with
A couple number strings or the lack of their prescence
Sent from my SM-G900R4 using Tapatalk

Great Post

Hello,
Id like to give a big thank you to all the developers/contributors that put together the rooting instructions in the developer section
A few days ago i successfully rooted my smg900r4!
it was very simple, and quick process using the instructions in the developer thread.
Using cf auto, super su, and odin. And Kies as backup
I will notate i had a little hiccup in the process.
It was a file type conflict regarding the samsung usb driver download zip being set to open in windows 8 and the desktop i used that was running windows 10.
Once i realized what the issue was a coulple setting adjustmemts later and i was done!
And as stated its rock solid stable
I am on stock rom etc.
I have installed the following apps and granted root access to them
- Apps2Sd (this is a very excellent multi function application !
- Busybox on rails
- App Manager iii (i had this installed prior to rooting the device.)
- Wifi Connection Manager
Couple questions;
Since ive installed the multi function Apps2SD application, is it redundant to keep app manager iii installed?
Are the hidden menus and settings only accessible by using the shortcut app found in playstore?
smg900r4 on tapatalk