ZTE v956 original recovery.img - Blade General

I f##$ced up ZTE v956 phone of my friend, that he just bought in china, while trying to install the CWM blade recovery
Phone is still working, but now i have no recovery at all
I tried several others and even uncontrolled ones found on google, but no luck
Who can help me out??
A.
ps ADB Fastboot commanline are working

Related

[Q] Erasing recovery through fastboot ZTE Skate

I bought ZTE Skate with CM10 ColdFusionX2 ROM. With backup I resotored nandroid 2.3.5 backup and everything worked fine.There was some installed recovery. I installed image bin file, original firmware for my country. That way I erased Recovery who was installed with CM10. Throught TPT ifor ZTE phones I installed Clockwork for Orange ZTE. After that I can't access android os, always boota into Recovery. I triedto restore backup from clockworkmode, but reports md5 mismatch, possibly for false recovery.
Is there any way to erase Clockwork recovery through fastboot?
adb devices show P743T_OUK recovery, no phone.
every command in fastboot show waiting for device message in cmd.exe
Please help.
holocen said:
I bought ZTE Skate with CM10 ColdFusionX2 ROM. With backup I resotored nandroid 2.3.5 backup and everything worked fine.There was some installed recovery. I installed image bin file, original firmware for my country. That way I erased Recovery who was installed with CM10. Throught TPT ifor ZTE phones I installed Clockwork for Orange ZTE. After that I can't access android os, always boota into Recovery. I triedto restore backup from clockworkmode, but reports md5 mismatch, possibly for false recovery.
Is there any way to erase Clockwork recovery through fastboot?
adb devices show P743T_OUK recovery, no phone.
every command in fastboot show waiting for device message in cmd.exe
Please help.
Click to expand...
Click to collapse
The tpt erased EVERYTHING on your phone and put the recovery on the boot partition. At this point your phone doesn't have any system to boot.
What you should do now is to first flash a recovery into the recovery partition and then install a ROM.
If you manged to remove the recovery your phone wouldn't boot at all. To restore it you'd have to tpt again.
Skickat från min Blade via Tapatalk 2
Please read this
http://forum.xda-developers.com/showthread.php?p=34022803
Asus TF300T | ZTE Blade

[Q] zte atlas w / zte cool

i have downloaded adb tools fastboot tools and recovery blade img.
i followed steps as in here
http://forum.xda-developers.com/showthread.php?t=1319257
after succesfully writing recovery img.
i cant make my zte atlas phone to get in recovery mode. i cant see any thing on screen only a logo.
these are commands i use to get in recovery.
./adb reboot recovery
./adb reboot download
both with no success. or should i installed wrong img? i dont know how to sure checked google a lot but cant find any hint out of ZTE-Blade or zte warp phone hacking tips...
also tried volume + - power on tips via cellphone but no success sometimes i got cellphone freezes.
still my cellphone boots and works like a charm in normally. but how can get in recovery mode. and install superuser zip
find info about my cellphone hardware its "blade2" via "android info app"
Solved. Zte atlas w (turkey.)
MLKL said:
i have downloaded adb tools fastboot tools and recovery blade img.
i followed steps as in here
http://forum.xda-developers.com/showthread.php?t=1319257
after succesfully writing recovery img.
i cant make my zte atlas phone to get in recovery mode. i cant see any thing on screen only a logo.
these are commands i use to get in recovery.
./adb reboot recovery
./adb reboot download
both with no success. or should i installed wrong img? i dont know how to sure checked google a lot but cant find any hint out of ZTE-Blade or zte warp phone hacking tips...
also tried volume + - power on tips via cellphone but no success sometimes i got cellphone freezes.
still my cellphone boots and works like a charm in normally. but how can get in recovery mode. and install superuser zip
find info about my cellphone hardware its "blade2" via "android info app"
Click to expand...
Click to collapse
================================================================================================================================================================================================================
thanks for forums.
with help of tutorials i just hacked and rooted my ZTE ATLAS.
i just flashed this mod.
http://android.podtwo.com/recovery/recovery-clockwork-4.0.1.5-blade2.img
and used to ./adb reboot recovery to get in recovery mod.
for rooting this device here the link for rooting files.
http://u7914872.letitbit.net/downlo...t-Root-SuperUser-Universal-Version-1.rar.html
have a fun.... yayyyy!
today is my birthday tooo what a nice present for me.... YAAAAAAAAYYYYYY!
Please read this
http://forum.xda-developers.com/showthread.php?p=34022803
Asus TF300T | ZTE Blade

[Q] Not able to boot my phone into recovery

Hello Everyone,
I have been using CM7 for a long time on my ZTE Blade Gen II.
But recently I tried installing CM 10 Kang development.
After installing it, I am not able to boot into recovery.
When I open Clockwork Mod, it says my phone sis not rooted.
I tried rooting my phone again using Z4root, but am not able to.
My phone's ram is only 256 thus it is not able to load jellybean properly.
I also tried booting through cmd by using adb bootloader, it says more than one device and emulator and fails to rebooot or root my phone.
Can anybody help me get my phone back to CM 7 and get it rooted again.
Thanks,
Himanshu
hisun2006in said:
Hello Everyone,
I have been using CM7 for a long time on my ZTE Blade Gen II.
But recently I tried installing CM 10 Kang development.
After installing it, I am not able to boot into recovery.
When I open Clockwork Mod, it says my phone sis not rooted.
I tried rooting my phone again using Z4root, but am not able to.
My phone's ram is only 256 thus it is not able to load jellybean properly.
I also tried booting through cmd by using adb bootloader, it says more than one device and emulator and fails to rebooot or root my phone.
Can anybody help me get my phone back to CM 7 and get it rooted again.
Thanks,
Himanshu
Click to expand...
Click to collapse
Get phone in fastboot mode.
Plug it in to PC.
Get boot.img and recovery.img (if there is one) from CM7 Rom.
Open ADB.
Type in commands:
adb devices
adb reboot bootloader
fastboot flash boot.img
fastboot flash recovery.img (if there is one)
Then you get in recovery and can install the CM7 rom.
kevinrus123 said:
Get phone in fastboot mode.
Plug it in to PC.
Get boot.img and recovery.img (if there is one) from CM7 Rom.
Open ADB.
Type in commands:
adb devices
adb reboot bootloader
fastboot flash boot.img
fastboot flash recovery.img (if there is one)
Then you get in recovery and can install the CM7 rom.
Click to expand...
Click to collapse
Hello,
Thanks for the guidance. When I try to reboot into fastboot by using following command:
adb -s CM10.1-Blade reboot bootloader
My phone reboots and it just gets stuck on Dell screen. It does not get into the fastboot.
Thanks,
Himanshu
Please help me
hello friends, can someone please help me, I am still stuck on this.

ZE500KL Can't access fastboot or recovery mode PLEASE HELP, URGENT

Please help, I need proffessional help.
Android Phone: ASUS Zenfone 2 Laser 5.0 (ROOTED)
Android Firmware: 5.0.2 Lollipop
Aim: To enter into Fastboot mode and Recovery Mode without problems
Situation: Recently installed TWRP Recovery in-app and through software, but when I try to enter in Fastboot Mode (HOLD POWER & VOLUMEUP) or even Recovery Mode (HOLD POWER & VOLUMEDOWN), I just end up in a hanged out ASUS Logo. I can't do anything except pulling out the battery myself and putting it back then booting the device through power button to boot it normally. I don't know if it's the problem with the model, or the phone's system itself, or it's just a bug, or a problem when I rooted my device through ADB.
(Note: When I rooted the device, I wasn't even able to see the blue "FASTBOOT MODE" when I tried it, I only saw the ASUS logo as well.)
For anyone who has any idea on what's going on with my device, please reply and help me. I really want to have the benefits of a rooted phone completly and I'm a new root user so I need assistance.
For anyone who has an idea on what I've done or on what should I do, please help me. Someone told me that I flashed the recovery and locked the bootloader, so it got damaged. If so, would Unlocking the Bootloader (from Wiki.CyanogenMod's Site) help my case?
CrimsonShade09 said:
For anyone who has an idea on what I've done or on what should I do, please help me. Someone told me that I flashed the recovery and locked the bootloader, so it got damaged. If so, would Unlocking the Bootloader (from Wiki.CyanogenMod's Site) help my case?
Click to expand...
Click to collapse
Do you can acesse to twrp recovery on your device
Same problem.....waiting for helping, please
mohamedelkholy said:
Do you can acesse to twrp recovery on your device
Click to expand...
Click to collapse
I think I have "access" to TWRP recovery. However, I can only access it through booting it up from ADB. I used the command "adb reboot bootloader" to boot it to fastboot mode, however only the ASUS screen appears but I treated it as the fastboot mode itself. Then I checked if it was really on fastboot mode through "fastboot devices" and it showed my serial number. I can only enter into TWRP using "fastboot boot twrp.img" . I don't know if I already installed it because although I opened it, I can't do it from the phone (POWER+VOLUMEDOWN)
Ok now boot twrp and then flashamodified zip or cm13 and your phone should eork you dhould to have unlockrd bootloader
Hi to all, i'd re-open this 3d for the same problem. After months I'm trying to re-sleep my ZE500KL. It was in "can't load invalid boot image" loop. I tried to force recovery mode and (wrongly) force to update from update.zip the stock fw stored in the uSD.
Since this time I can't enter in recovery mode more but fastboot only. The problem is that, in spite of the USB drivers are installed, fastboot does not recognize any connected device.
I've run Win 10 pro with a zenbook ux333fn laptop and I remembered android 6 on the phone, the last time I saw it alive.
I've tried also to install twrp 3.1, with no positive results.
Anyone can suggest me any solving way?
Thanks to all
...anybody?
Up.....
sh4d3_ said:
Hi to all, i'd re-open this 3d for the same problem. After months I'm trying to re-sleep my ZE500KL. It was in "can't load invalid boot image" loop. I tried to force recovery mode and (wrongly) force to update from update.zip the stock fw stored in the uSD.
Since this time I can't enter in recovery mode more but fastboot only. The problem is that, in spite of the USB drivers are installed, fastboot does not recognize any connected device.
I've run Win 10 pro with a zenbook ux333fn laptop and I remembered android 6 on the phone, the last time I saw it alive.
I've tried also to install twrp 3.1, with no positive results.
Anyone can suggest me any solving way?
Thanks to all
Click to expand...
Click to collapse
Up...
QFIL or AFT can be the solution.
I have a similar problem, a hard bricked Z00ED (ZE500KL) not able to get into fastboot or recovery.
after reading some thread here an there. that are Processor / Chipset specific flash tools that help flash bootloaders and repartition hard bricked device.
For mobiles with MediaTec devices, there is a tool called SP Flash Tool. I wasted a whole day with it. then understood that Z00ED (ZE500KL) has a Qualcomm Processor MSM8916
Therefore we need a Qualcomm Flasher here (QFIL )
But nos I am stuck with getting firmware for ZE500KL that can be used by QFIL tool, It should have a firehouse*.mbr file that is the programmer (dependent on CPU of the phone) and a rawprogram*.hex file that I don't know where to get from.
Thanks... It seems a bit less wild, but in any case no solving, yet
Up! ...anyone?
Up!

System problem

Hello, recently i tried to root my phone using a method through twrp that I saw in the internet. After that my phone just bricked then I searched for informations online and I saw some forum thread saying to go to wipe and clear System. So I did that. Now I cant flash another rom in my phone and my phone wont start
Please help me. I still can acces Fastboot and TWRP
In repair system in TWRP is saying that the size of system is 0mb. Help me
Phone: Asus Zenfone 2 Laser ZE500KL
Don't need help anymore. I figured out how to do it myself. I just needed the system.img then open fastboot in my Asus. Then I typped fastboot flash system system.img then i wat around 3 minutes and its done

Categories

Resources