[l5}[root][aosp 4.4] - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

Hi
I am a step below Noob if that exists.
Thanks to XDA, I was able to root my LG Optimus L5 E612 on JB, V20d: install CWM, and install AOSP 4.4 on Windows 8.1 PC without any problems.
Here is what I did:
I pulled out the LAN cable.
Turned off Antivirus and Windows Defender.
Edited "hosts.ics" file using the instructions given here: http://forum.xda-developers.com/showthread.php?t=2409308
In my PC it was "hosts.ICS" file with MS Outlook as the default program.It was the only step I followed from the above guide. Earlier, I had tried to root the phone using that guide on Windows 8.1 as well as Windows 7 without success. Probably antivirus and/or Windows defender spoiled the efforts. I just don't know what went wrong then!
Then the fun started: My phone won't allow me to do anything! It kept on displaying the error message
"android.process.acore has stopped"
But then I followed this guide:
http://forum.xda-developers.com/showthread.php?t=2405357
Now my phone is working just fine as far as I can tell. Wifi is working. Not tested Bluetooth as yet.
Thank you people!:good:

Order of Operations
The order in which I followed the steps:
1. Pull out internet cable.
2. Disabled antivirus.
3. Disabled Windows Firewall
4. Disabled Windows defender
5. Edited hosts.ics file
6. Pulled out battery, SIm and MicroSD card from phone
7. Connected the phone to PC while pressing volume down+Power+Home buttons
8.Released Power button as the phone vibratedwhile still keeping the volume down+home buttons for a few seconds
9. Phone was connectd in download mode
10. Opened kdz updater, selected .kdz file already downloded and ran.
11. Waited till it crashed
12. Did what raul338 said here:
http://forum.xda-developers.com/showthread.php?t=2564610&page=12
namely:
Format system, format data & data/media, format cache
wipe dalvik cache
flash rom
flash gapps
flash kernel (optional)
reboot
flash supersu
flash rootfixer
reboot
And Done!!

Related

[GUIDE] How to restore the Stock ROM on the Grand X Pro

How to restore the Stock ROM:
For Grand X Pro​OK, today I'll be showing you how to restore the Grand X Pro back to Stock, just as it was before you flashed the custom ROM...
You will need:
A PC Running Windows 7 (ONLY WIN 7 WORKS FOR NOW)
The Grand X Pro
A USB Android Cable
My FlashTool
ZTE VCOM Preloader Drivers MT6577
So , first get the full flashtool from here: ApeelMe's Blogspot - ZTE Grand X Pro FlashTool
Also install the Preloader drivers if you didn't do so...
Plug in the Grand X Pro and then turn it off...
It should (on the PC) install some drivers and fail , don't worry...
Open flashtool and select the NandUtil file and the Scatter file (nandutil.bin and mt6577_scatter.txt , their names are like that)
In the menu where you can select ANDROID , RECOVERY , BOOT , MBR, DSP , Preloader , etc DON'T Touch anything as it will wipe that partition and you may hard-brick your device..
Click "Download" in flashtool, wait till the green circle...
After the green circle appears , close flashtool and disconnect the phone.
Now turn it on, good ol' stock ROM...
Hope this works for you as it did work for me...
TeamMaverick
it didn't work for me, it completes the download and evrything but it still just stands on zte sign an that is it, can you help?
trying to use but i get a nandutil.bin file is not a valid da format. Is it corrupted?
Anyhowse. i went ahead and flshed with all in one. im now with cyanogenmod and cwm which is the opposite of what i needed. How can I return to stock rom and stock recovery? basically i need to send it back to shop because of faulty screen.
Resolved. Followed guide with link here
http://apeelme.blogspot.no/2013/08/zte-blade-super-gyari-allapot.html?m=1
how did you manage to follow he steps in flash tool to find download agent and scaterr file, the all thees ebr1, and the rest....i have done everything FAILED, it didn't change nothing same thing like with the solution in this post
majmun123 said:
how did you manage to follow he steps in flash tool to find download agent and scaterr file, the all thees ebr1, and the rest....i have done everything FAILED, it didn't change nothing same thing like with the solution in this post
Click to expand...
Click to collapse
Didn't have any problems followed these steps:
1. run Flash_tool.exe from desktopfolder (maybe try run as admin if a problem)
2. select File-open scatter loading file
3. select MT6577_Android_scatter_emmc.txt from restore to stock folder.
the ebr1 etc should be automatically filled in with file pathway
4.click download button
5. plug in switched off telephone (if drivers installed properly should just run)
6. wait until green circle appears. hey presto! switch on telephone.
nothing i hav done all that, an the problem is when it is all finished, i get errors such as can't mount data, it doesn find anything, i don't know what to do else, if you want i can post pictures when i enter recovery mode
repair grand x pro
Hi, this is no working for me. Just have CWm after finished.
I tried update tool software too, but can't recognize phone, red x stay at chacking and installing drivers.
Someone help?

[WIFI Only] LATEST STOCK ROM (KPO) ROOT GUIDE

This is similar but not same http://forum.xda-developers.com/showthread.php?t=2088427 BK201EKY' s guide
the difference you will get the non-touched latest stock rom rooted and cwm recovery enabled.
(this means no visual and other modifications, pure stock rom & rooted & cwm installed)
What we need?
1. Latest stock rom "P1010KPO_P1010XEUKPO_HOME.tar.md5"
Download from : http://www.sammobile.com
2. Root and CWM for KPI Rom "madteam-cwm-p1010-kpi.tar"
Download from madteam: http://sourceforge.net/projects/jbro...i.tar/download
3. Wifi Fix for KPO rom "wifi.zip"
Download form: https://www.dropbox.com/s/n69ulrcts1h7ue2/wifi.zip
(This file need to be pasted to fix Wifi error after the madteam-cwm-p1010-kpi.tar flashed on KPO ROM - how to explained in the step)
4. Odin and USB drivers if you need
For odin: http://sourceforge.net/projects/jbro...1.zip/download
For USB drivers: http://hotfile.com/dl/133929348/9107...300_0.zip.html
Steps:
1. Flash the latest KPO rom with odin.
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the "P1010KPO_P1010XEUKPO_HOME.tar.md5 file then click start and wait for the tablet boots and home screen shows
2. Download and install es file manager from play store
3. Create a folder Extract the wifi zip into a sd-card then instert the card to your tablet (or use internal memory)
4. Flashing the KPI rooted kernel and CWM
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the madteam-cwm-p1010-kpi.tar file then click start and wait for the tablet boots and home screen shows
5. Run ES file manager and get the root access, (get the RW access "/" and "/system" )
6. Copy& paste the extracted files in step 3 to te /system/etc/wifi (replace files when asked)
7. reboot your tablet and now you have non touched stock rom, rooted, cwm installed and wifi error fixed.
if duplicated sorry. İ searched but not found a root methot for the KPO rom without any modifications, then found the non-english sites for the wifi.zip trick and it worked for me then i want to share.... :good:
Xposed framework for GB devices can be found here --> http://forum.xda-developers.com/showpost.php?p=44034334

plz help yoga 2 830l boot failed. efi hard drive

hi
how are you
I have a big problem
When you update a device error occurred ( fastboot failde)
Then the machine continues to this situation
Video demonstrates the problem
youtube.com/watch?v=E8k0KOQF8p0&feature=youtu.be
I do not know how to solve the problem
is there a solution?​
you tried to flash a kitkat rom over an existing lollipop and the files flashed cannot be loaded by the lollipop bios (that one remained the same) you need to flash a lollipop stock rom instead
1. download and extract this file someplace on your pc
2. uninstall your existing Phone Flash Tool and from the drivers folder install both files (Intel Phone Flash Tool and Android Driver accepting defaults) reboot pc when finished
3. place your tab in DNX mode (from power off press and hold both volume keys then press pwr to start, in a few you screen will show "Fastboot starting..." message and hang on that. you must get that message on your tab screen, restart from power off until you have it)
4. start the installed Phone Flash Tool and load flash.xml from the extracted YT2-830L... folder then Start Flashing, it will reboot when done
ionioni said:
you tried to flash a kitkat rom over an existing lollipop and the files flashed cannot be loaded by the lollipop bios (that one remained the same) you need to flash a lollipop stock rom instead
1. download and extract someplace on your pc
2. uninstall your existing Phone Flash Tool and from the drivers folder install both files (Intel Phone Flash Tool and Android Driver accepting defaults) reboot pc when finished
3. place your tab in DNX mode (from power off press and hold both volume keys then press pwr to start, in a few you screen will show "Fastboot starting..." message and hang on that. you must get that message on your tab screen, restart from power off until you have it)
4. start the installed Phone Flash Tool and load flash.xml from the extracted YT2-830L... folder then Start Flashing, it will reboot when done
Click to expand...
Click to collapse
Really I do not know how to thank
But how Mark device receives calls​
sayyid haroun said:
Really I do not know how to thank
But how Mark device receives calls​
Click to expand...
Click to collapse
download extract and flash this using the same procedure (from DNX load and flash using flash.xml)
ionioni said:
download extract and using the same procedure (from DNX load and flash using flash.xml)
Click to expand...
Click to collapse
very good Everything is just fine.
Thank you very much
I want custom rom Lollipop for
The device phone lenovo s856​
please
I have a question you can download Windows 8 on the tablet
I have same problem on Lenovo yoga 1050L... any help?
ionioni said:
you tried to flash a kitkat rom over an existing lollipop and the files flashed cannot be loaded by the lollipop bios (that one remained the same) you need to flash a lollipop stock rom instead
1. download and extract "this file" someplace on your pc
2. uninstall your existing Phone Flash Tool and from the drivers folder install both files (Intel Phone Flash Tool and Android Driver accepting defaults) reboot pc when finished
3. place your tab in DNX mode (from power off press and hold both volume keys then press pwr to start, in a few you screen will show "Fastboot starting..." message and hang on that. you must get that message on your tab screen, restart from power off until you have it)
4. start the installed Phone Flash Tool and load flash.xml from the extracted YT2-830L... folder then Start Flashing, it will reboot when done
Click to expand...
Click to collapse
Hi ionioni,
I have the same problem with Yoga tablet 830LC, would you please re-upload the file, i cannot get it because it is removed.
Thanks!
hi dear ionioni
the link you provided "flash this" is dead. can you please upload it again?
Thanks

[HELP] Soft bricked smartphone

Hi everyone,
For some stupid reason a reset the file system i now I'm stuck in the LG logo.
1. I can enter in download mode - in Device manager the PC recognized as LGE AndroidNet USB Serial Port (41)
2. I can enter in recovery mode (Cyanogenmod recovery, which is very based) - in Device manager the PC recognized as Android ADB Interface
So far, so good. BUT. I'tried to flash the phone with LG FlashTool 2014 and i'm stuck at 2%. Ok, i was tried the fix with FixedDownloadcmode.bat, but when nothing is uploading on the phone (which by ADB is recognized as sideload when i'm in recovery mode and apply the ADB connection). I tried to push by ADB but nothing is uploading - error: protocol.......
LGUP recognized my phone as unknown, so this method is not working now.
Via ADB i can't send even TWRP recovery, which is so much flexible than cyanogenmod recovery.
I will be thankful for any help from your side.
Thank you in advance!
https://forum.xda-developers.com/lg-g2/general/alternative-fix-lg-flashtool-stuck-2-t3605753
Same happened to me. Try this if you can reach your storage
https://forum.xda-developers.com/showthread.php?t=2663369
https://www.youtube.com/watch?v=Lg693AYgoTo
ATT 4.4.2 KitKat:
https://mega.nz/#!n0RTUYZD!MVntiPxuyW...
ATT 4.2.2 JellyBean:
https://mega.nz/#!e5RERS4L!FjZyopcvwM...
T-Mobile 4.2.2 JellyBean:
https://mega.nz/#!qsRSBDwD!KKCETp41O1...
Modified DLL file if nothing else works:
https://mega.nz/#!f5xTGKrC!ifBCOAnK4j...
I had a very similar problem with it getting stuck at the logo after pushing supersu to the phone. I followed Supersport every single step of the way in his video. I think his links are the only valid ones online now, so just download them and reflash your phone. If your G2 is anything like mine, drivers will never appear to be installed correctly and it never restarts, only shuts down.
His method is:
1) Download and install LG drivers on PC
2) Download and install the flash tool and patch it
3) Download and load the .tot and .dll files into the flash tool
4) Enter download mode on G2 by holding volume up while connecting USB
5) Switch G2 Com port to 41 in device manager
6) Once Flash tool shows that all ports are ready, power down G2 and disconnect
7) Hold volume up and reconnect to get back into download mode
8) LG Flash tool starts flashing
9) Complete
Note: If your G2 was screwed up as bad as mine, it'll say failed but all the main system files will load to the device before it restarts and it'll even shut itself off while doing it's installation on first reboot. Mine somehow was still revived from this state with his method.
I forgot to add this but couldn't edit my post for some reason.
For D800:
Master archive of 5 files needed to do this:
https://www.androidfilehost.com/?fid=95747613655047114

How to Install Update Using Local Upgrade or Recovery

Hey Folks, i know it is basic stuff but it can helps new users here.
Method 1: Install Update Using Local Upgrade in Phone Settings
First Download Proper ROM package for OnePlus 5 and 5T.
Connect your device to the PC or MAC using the USB cable.
Now, Transfer the Downloaded ROM file to the root of the device's Internal Storage. ( Don't put in any folder )
Disconnect the smartphone from the MAC or PC.
Now Go to the phone's Settings >> System Updates. Then tap on the gear icon on the top-right corner of the display.
Now Select the Local Upgrade*Option.
The Phone system will bring the OTA Update ROM file from the Internal Storage.
Select the file name, then tap on the Upgrade Now button to start installation process.
Method 2: Install OTA Update Using TWRP Recovery
First Download Proper ROM package for OnePlus 5 and 5T.
Connect your device to the PC or MAC using the USB cable.
Now, Transfer the Downloaded ROM file to the root of the device's Internal Storage. ( Don't put in any folder )
Disconnect the smartphone from the MAC or PC.
Now Go to the phone's Settings >> System Updates. Then tap on the gear icon on the top-right corner of the display.
Now Select the Local Upgrade*Option.
The Phone system will bring the OTA Update ROM file from the Internal Storage.
Select the file name, then tap on the Upgrade Now button to start installation process.
Once the process of Installation is complete.
Turn off the Device and boot into recovery mode. to do so Press and hold Volume up + Power Button until your device boot into Recovery mode.
Go to Wipe data and cache. ( You can use Volume buttons to navigate and power button to select.)
The Press Erase everything( Pics, Music, etc) and then select ok to process.
Is method 1 working for updating from rooted official 5.1.7 to OB20? I am on stock recovery and would uninstall magisk first.
McFlypants said:
Is method 1 working for updating from rooted official 5.1.7 to OB20? I am on stock recovery and would uninstall magisk first.
Click to expand...
Click to collapse
Now you need to follow method 2 for rooted device. if you follow 1st method you may see some app crash and other problems.

Categories

Resources