Database Users

i need help breaking my phone... :S

hey i have an htc touch vogue. and i need to get it replaced. so in order for me to get it replaced i need to have it stop working. this damage cannot be physical so however funny it may be to tell me to toss it from a building plz be serious. if you guys know of any software that i can put on my phone that will either completely screw up my entire phone, or just cause a small problem that can easily be fixed by clearing the storage but can still be a continuous problem. if you have any suggestions please reply to this thread, or private message me. that you.... have fun with this one, im seriously looking for any program that you have ever put on your phones and had caused problems for you and for you to send them my way.. thanks

I've had issues and gotten like 7 replacements. Just got a sprint refurb and it's already freezing up on me and all I installed is pcm keyboard and opened up opera that is installed with sprints customizations. The phone got all screwed up.

try to write a virus for it.. or try to corrupt system files by deleting the ones that are needed.

I got my replacement phone, It's already having issues of the hardware buttons not responding. A virus would have to destroy the rom. Deleting critical files other wise they'll just tell you to do a restore.

i got one and it has still stumped verizon , only if you really want to **** your phone up dont come crying to me if you end up regreting it, cause i will just laugh at you!!!
dial ##778# maybe ##786#
if you are using nfsfan's roms make sure you have a cdma dialer to do the ## codes in win mo. it should bring up EPST hit edit, the unlock code or whatever is 000000. then you can **** up all the **** you want lol(it is your vital connection settings to your carrier(i did accedentally)) i hit menu and reset, it does a hard reset and all the settings are now 00000000005406 and my phone is screwed for now, vzw mentioned getting me a replacement maybe, i really dont care i just want my data to work!
i was originally trying to fix what hero-sprint had screwed up...
hard reset wont fix this it will mess up your data and well for me my sms too but i still get calls

They can't just give you the correct number to put in to reactivate it? sounds like how you program the sprint phones

The easiest way would be to interupt the ROM update process. Use an official ROM update, & when the flashing progress reaches 2% disconnect the USB cable. The device will no longer boot. You then call Sprint & act stupid about what is wrong with it. "I don't know what's wrong, it just won't power up anymore."

Is It Broke?

Hi All,
Got my HD2 yestreday (unlocked, supposedly, from Ebay).
I cant make or take calls, nor can i send txt's etc. There is an exclamation mark next to the reception indicator(if thats what its called)?
Is it broke? - is it locked? - Is it a stolen phone whicha has somehow been "blocked"?.
Please help guys!

Without knowing if it's definitely been unlocked it may just still be locked to it's original network in which case you'd need to buy an unlock code.
If that's the case then no need to worry - however if it's been blacklisted (reported as stolen / lost etc) then it's going to be pretty much useless, but i don't think there's a way of finding out if it's been blacklisted.
Have you tried removing and re-inserting the sim card etc?
Does it have any branding in the software to indicate which network it belonged to originally such as a branded boot screen?
Then of course it may even just be faulty....

Hiya, thanks for that. The box has an Orange sticker on - but there is no software branding.

OK - i dont suppose you have an orange sim to hand or know anyone you could borrow one from to try in the phone - it would at least prove that it's just a network lock and nothing more serious.

The one thing i note from google though is that you get a "your handset is locked" screen when an unuseable sim is in the handset? and you switch it on? And i dont get that?
I have bought an unlock code - but dont know how to get to a screen that will allow me to enter it?

I'm not too sure what is displayed on the screen in the event of an incorrect sim as mine was factory unlocked when i bought it.
It may have been better to wait and prove the phone is just simlocked before buying an unlock code because if the phone is blacklisted or faulty then that code's useless.

I completely agree, but you know what men/gadgets are like - you want it working NOW!

Haha yeah too true mate
I'm not too sure what else to suggest, you really need to find out if its just a simlock or worse..
Good luck getting it working though
Oh just a further thing to try - a hard reset
Start >> Settings >> Security >> Factory Reset
Enter 1234 into the box and then press 'yes'

Still the same :-(
But i now have a G icon!
When i boot up i get a "which network do you want to choose" message - to which i select Vodafone, but we still have the exclamation mark - and no calls/txts etc......

Have you tried HSPL'ing ur device and flashing diffrent radio?

Hiya, sorry, how do i do that?

Hi, ive found that thread - but when i try it says on my pc - cannot initialize as Rapi.dll not found?

Ok - now done - still same problem?

It was network blocked (barred), due to non-payment of bill.
Long story short, ive ordered a Desire now.

Ah Sorry to hear that mate. Hope your getting a refund sorted out ok with the dodgy ebayer..
Have fun with the Desire!

Should be ok for the refund - after all its a shop (cash converters type place), and i have threatened them with the police.
Before i sent it back i got going with a great rom though (albeit unable to call and txt!), the WM Pro user 2.02 - looked fab!

question about installing a stock 2.3.3 firmware onto at&t branded play 4g?....

I have a at&t unlocked play 4g working with my tmobile and the at&t 2.3.3 has bloated apps they installed. I found a website that has a stock 2.3.3 firmware for an r800at and install it onto the phone with flashtool, now is this a vanilla 2.3.3 gingerbread or is it going to install the same way the phone is now with all the at&t apps n stuff?
If not what will be required to install a stock android vanilla 2.3.3 or even the new 2.3.4 onto the phone and Im not rooted btw just unlocked. Thanks

pctektgg said:
I have a at&t unlocked play 4g working with my tmobile and the at&t 2.3.3 has bloated apps they installed. I found a website that has a stock 2.3.3 firmware for an r800at and install it onto the phone with flashtool, now is this a vanilla 2.3.3 gingerbread or is it going to install the same way the phone is now with all the at&t apps n stuff?
If not what will be required to install a stock android vanilla 2.3.3 or even the new 2.3.4 onto the phone and Im not rooted btw just unlocked. Thanks
Click to expand...
Click to collapse
The 2.3.3 R800at FW I found has all the AT&T bloat. Just install the generic 2.3.4 R800a FW and it will add features (screenshot, tethering, etc) get rid of all of AT&T's bloat including some of the games (it will add Tetris and Bruce Lee but get rid of Tbloxx My City and SIMS 3). Sony Ericsson's bloat will still be there but it is MUCH more manageable.

CZroe said:
The 2.3.3 R800at FW I found has all the AT&T bloat. Just install the generic 2.3.4 R800a FW and it will add features (screenshot, tethering, etc) get rid of all of AT&T's bloat including some of the games (it will add Tetris and Bruce Lee but get rid of Tbloxx My City and SIMS 3). Sony Ericsson's bloat will still be there but it is MUCH more manageable.
Click to expand...
Click to collapse
Cool thanks for this info.... Now just google the 2.3.4 or do you hvae a website to get the fw, and is it easy to install?.... Just use that flashtool I found at the xperiagamer website and is it easy as 123 or what?
I dont have to be rooted right? Thanks

pctektgg said:
Cool thanks for this info.... Now just google the 2.3.4 or do you hvae a website to get the fw, and is it easy to install?.... Just use that flashtool I found at the xperiagamer website and is it easy as 123 or what?
I dont have to be rooted right? Thanks
Click to expand...
Click to collapse
I got it from the "Xperia PLAY Super Compilation" thread on these forums and just used Flashtool to load it. It couldn't use cellular data until I manually entered my APN settings (it would fail to get it automatically and suggest going to Sony Ericsson's website), so you may want to write them down or back them up with an app first. You do not have to be rooted.

CZroe said:
I got it from the "Xperia PLAY Super Compilation" thread on these forums and just used Flashtool to load it. It couldn't use cellular data until I manually entered my APN settings (it would fail to get it automatically and suggest going to Sony Ericsson's website), so you may want to write them down or back them up with an app first. You do not have to be rooted.
Click to expand...
Click to collapse
When you say cellular data you mean the internet right like having a data plan on your plan right? If so... I dont have to worry about that since I never had any data plan yet
Why does the stock at&t firmware pick up data plan? Why not the 2.3.4? Thanks Again

pctektgg said:
When you say cellular data you mean the internet right like having a data plan on your plan right? If so... I dont have to worry about that since I never had any data plan yet
Why does the stock at&t firmware pick up data plan? Why not the 2.3.4? Thanks Again
Click to expand...
Click to collapse
the stock 2.3.4 FW meant for the r800a does not have the APN settings for the AT&T r800at which is why you should use a apn backup app or write them down.

Milenko2121 said:
the stock 2.3.4 FW meant for the r800a does not have the APN settings for the AT&T r800at which is why you should use a apn backup app or write them down.
Click to expand...
Click to collapse
Yep, but it does go online and try to retrieve them. Supposedly, it can only do this over WiFi without APN data in the first place but I have tried that and it still fails. Also, when it attempts it without WiFi, you can see the HSPA "H" logo appear in the status bar for a moment and it *IS* online for that moment even without APN settings (you can load a web page if you request it at the instant).
Now, I think I finally figured out why it was sometimes saying that it wasn't connected to the Internet even though it was and was successfully loading the page even while the error was displayed: When you back up and restore APN settings or flash from 2.3.3 R800at to 2.3.4 R800a without wiping user settings, there are TWO APN entries, only one of which works. The first one is the one I needed to delete. I couldn't select it anyway (radio button would always go back to the second APN settings entry). I first tried deleting the second one to force selection of the first and I lost all data until I restored my APN settings from my backup again.

Ok so I just followed the " Little flashtool tutorial" guide from " Logseman " on this forum and just flashed my 2.3.3 USA play 4g at&t r800at to the latest north america 2.3.4 r800a firmware.
I got 2 questions:
#1: After the flash the flashtool said in the log this:
"For flashtool, Unknown Sources and Debugging must be checked in phone settings."
What does this mean and do I do this?
#2: Also I notice when the phone is on the locked screen the tmobile word at the top right corner under the time is there but when I unlock it to the home screen the tmobile word goes away, is this ok for this new firmware? The gingerbread 2.3.3 alsways displayed tmbole word all the time. Thanks
One more question I also notice when doing a cold turn off and back on it even takes longer for it to boot compared to the at&t branded firmware is this normal too? Or maybe because it was the very first boot and it was arranging files and such? Thanks
Sorry more questions where is or to get the xperia games icon that was on the home scrren with the stock at&t firmware. I know if I slide out the gamepad it auto opens it but sometimes I use the icon without always slideing in and out the gamepad?
Not a complaint just want to learn if its a reginail thing to specific roms or something but when i go to xperia play and then more games it has all or some of the games in the list that the stock at&t rom had but this one even has more games I never heard of and some are free. why is this? thanks

pctektgg said:
Ok so I just followed the " Little flashtool tutorial" guide from " Logseman " on this forum and just flashed my 2.3.3 USA play 4g at&t r800at to the latest north america 2.3.4 r800a firmware.
I got 2 questions:
#1: After the flash the flashtool said in the log this:
"For flashtool, Unknown Sources and Debugging must be checked in phone settings."
What does this mean and do I do this?
#2: Also I notice when the phone is on the locked screen the tmobile word at the top right corner under the time is there but when I unlock it to the home screen the tmobile word goes away, is this ok for this new firmware? The gingerbread 2.3.3 alsways displayed tmbole word all the time. Thanks
One more question I also notice when doing a cold turn off and back on it even takes longer for it to boot compared to the at&t branded firmware is this normal too? Or maybe because it was the very first boot and it was arranging files and such? Thanks
Sorry more questions where is or to get the xperia games icon that was on the home scrren with the stock at&t firmware. I know if I slide out the gamepad it auto opens it but sometimes I use the icon without always slideing in and out the gamepad?
Not a complaint just want to learn if its a reginail thing to specific roms or something but when i go to xperia play and then more games it has all or some of the games in the list that the stock at&t rom had but this one even has more games I never heard of and some are free. why is this? thanks
Click to expand...
Click to collapse
The debugging is mostly if you want to root right away or do things over the ADB interface. You don't have to do it.
How did you get it on T-Mobile? Unlock code? Unlocked bootloader? Mine only says AT&T on the lock screen. It does take longer on the first boot as it creates cache files and such. It saves space in your status bar.
The icon has been renamed from "Play Games" to "Xperia(tm) PLAY," which doesn't quite fit in the portrait mode. Find it in the app drawer and make another shortcut to it by holding on it a second and then dropping it where you want on the Home screen. The "More Games" section changes all the time. The Bruce Lee game is new. I used Titanium Backup on the AT&T ROM to backup TBloxx My City and SIMS3 and reloaded them on the generic FW so I have all of them showing in my launcher.

CZroe said:
The debugging is mostly if you want to root right away or do things over the ADB interface. You don't have to do it.
How did you get it on T-Mobile? Unlock code? Unlocked bootloader? Mine only says AT&T on the lock screen. It does take longer on the first boot as it creates cache files and such. It saves space in your status bar.
The icon has been renamed from "Play Games" to "Xperia(tm) PLAY," which doesn't quite fit in the portrait mode. Find it in the app drawer and make another shortcut to it by holding on it a second and then dropping it where you want on the Home screen. The "More Games" section changes all the time. The Bruce Lee game is new. I used Titanium Backup on the AT&T ROM to backup TBloxx My City and SIMS3 and reloaded them on the generic FW so I have all of them showing in my launcher.
Click to expand...
Click to collapse
Yes the very first boot took long but now it boots fast like normal.
I unlocked it by removing the battery and peeling off the white sticker and then on the bare circuit board theres two contact points that that you use a paper clip and touch both contact points with each ends of paper clip after of course you straighten out the paper clip first, then while holding u plug the phone to the computer usb port for about 10 seconds and that will unlock a locked xperia play 4g.
And yea the tmbile wording is at my locked screen it just goes away once unlocked to home screen, but I thought if I remember right the stock at&t rom had that t-mobile wording all the time.
Thanks

came in to help but everything seems answered............pctektgg check your inbox

I beleive for our phones there isnt any unlock codes, you have to do the procedure that I did.
After removing the white sticker underneath the battery, lay down the phone vertical/upright but the back of the phone still facing you/up.
Then turn the phone to the your right so the phone will be laying sideways.
Then while looking down at it sideways look towards the top left corner area of the green circuit board you will see gold contact points area, well right there theres 3 little circle gold contact points in a row, well the ones you want to touch/jump is the 1st and 3rd one which the 3rd is the last one. Dont worry about the middle one.
What I did was have the usb cable plugged in to the pc already before doing this, then used a paper clup to make like a u-shape then used it to touch the contact points.
So I first make sure the contacts are being jumped/touched and hold for about 10 to 15 seconds but after about 2 seconds into it being jumped/touched I plugged in the usb cable into the usb port on the actual phone and keep holding like this for about the 10 to 15secs i mention above.
Before doing all this make sure your windows has the sony pc companion installed and the drivers for your phone are working within windows and such.
After doing this pop in your sim card and put battery in but dont put sticker back on yet and battery cover, If you still get the sim unlock pop up, do the steps couple more times, if it doesnt work then you will need a special tool to install on the pc for this procedure to workl then. Heres the link where i got the unlocking procedure.
try these free steps incase they work before buying it for 25 bucks or so. If my steps are confusing then yea I would just buy the procudere from this website I give you and you'll bne good to go. Just dont waste time trying out different websites for a code cause there isnt any.
http://www.cellunlocker.net/
PS: You do this all without the battery in, only after you want to try to see if its unlocked you put battery back in.

pctektgg said:
I beleive for our phones there isnt any unlock codes, you have to do the procedure that I did.
After removing the white sticker underneath the battery, lay down the phone vertical/upright but the back of the phone still facing you/up.
Then turn the phone to the your right so the phone will be laying sideways.
Then while looking down at it sideways look towards the top left corner area of the green circuit board you will see gold contact points area, well right there theres 3 little circle gold contact points in a row, well the ones you want to touch/jump is the 1st and 3rd one which the 3rd is the last one. Dont worry about the middle one.
What I did was have the usb cable plugged in to the pc already before doing this, then used a paper clup to make like a u-shape then used it to touch the contact points.
So I first make sure the contacts are being jumped/touched and hold for about 10 to 15 seconds but after about 2 seconds into it being jumped/touched I plugged in the usb cable into the usb port on the actual phone and keep holding like this for about the 10 to 15secs i mention above.
Before doing all this make sure your windows has the sony pc companion installed and the drivers for your phone are working within windows and such.
After doing this pop in your sim card and put battery in but dont put sticker back on yet and battery cover, If you still get the sim unlock pop up, do the steps couple more times, if it doesnt work then you will need a special tool to install on the pc for this procedure to workl then. Heres the link where i got the unlocking procedure.
try these free steps incase they work before buying it for 25 bucks or so. If my steps are confusing then yea I would just buy the procudere from this website I give you and you'll bne good to go. Just dont waste time trying out different websites for a code cause there isnt any.
http://www.cellunlocker.net/
PS: You do this all without the battery in, only after you want to try to see if its unlocked you put battery back in.
Click to expand...
Click to collapse
I'm pretty sure that this only works when you have SETool or are remotely connected with someone who does and has software for accessing your USB ports.

CZroe said:
I'm pretty sure that this only works when you have SETool or are remotely connected with someone who does and has software for accessing your USB ports.
Click to expand...
Click to collapse
Yea I think your right about a setool program because I just looked at the email that unlock website I mention here sent me a link to download the software and instructions to do the procedure I explain here and with that software running and when finally plugging in the phone to usb cable of the last step then about about that 10 seconds of holding the jumper on the 2 contact points the software pops up with a windows saying "unlocking done".
I had my wife plug the usb to the phone side since I was holding the phone and paper clip with my hands, thats when she told me about the pop window saying its unlocked.
The software they give you even has a youtube video built in into the software to show you the exact steps involved and they use tweezers instead of paper clips.
I was just hoping this will work without that tool software but I guess not.

[Q] Nexus 7 3g: Is there a way to view my SIM messages without root ?

First of all, sorry if this is the wrong section or if it was mentioned before, i couldn't find post that was answering my question, which is:
I have Nexus 7 3g with a data plan, but my operator is sending me how much I have to pay via SMS. So today I got the message for my first bill. I got an SMS notification, clicked it and small screen poped up, read it and closed it. But, of course my dad decided that he wants to see the message again, but from where the heck can I open it from? An obvious decision that I thought of was to insert the SIM to my phone so that my dad read the message, but is there a chance to open it again on the Nexus?
P.S. The easiest obviously would be rooting, but I just bought the tablet and decided to postpone this action, if its not possible without root, whatever, I will make SS of them :laugh:

[Q] To root or not to root

Hi,
I am new to all this so please forgive what's probably a repeat. I have had a browse but can't find an answer to my specific problem.
I got a nearly new note 3 on e-bay and only saw the 'doesn't work in UK' warning after I bid (I know, stupid or what, but I swear it wasn't there before I bis as I was looking out for it). Anyway, I decided to take it on the chin and do what I needed to do to make it work.
I read around, this site is great, and decided that I would need to root and was quite prepared to do so but, then the phone arrived and the confusion set in.
The phone doesn't ask for an unlock Sim password or have the screen shown in the 'How to... you youtube videos' I don't have to dismiss anything to get into the phone and play with it. It's connected to my home network fine and and I can play with it to my hearts desire. It does everything in fact except make phone calls (my Dad thinks this is hilariously funny, a phone you can't use as a phone hahaha).
When I do try to make calls it says it is not registered to the network but when I have gone into settings to check it says it is!!!
I don't want to go to trouble of rooting if it doesn't need it but, what do I need to do!?!
Also there is the new kitkat thing that's thrown more confusion into my little life, if I root will I get that and if I don't, do I or should I care?
What good is a phone that doesn't make calls?
Any advice, hints or tips with this would be great x