Root on 4.4.2 - G2 Q&A, Help & Troubleshooting

Hi everyone.
I have 4.4.2 installed manually and now i want to get back the stock rom 4.2.2 because of a big touchscreen problem.
With flash tool, it always stopps at 15% so i have to flash rom with custom recovery.
The device is now unrooted, so i need a method to root KitKat. I tried already with iroot, vroot, kingo root, super one click root but none of them worked.
I need your help, thanks.

Have you tried http://forum.xda-developers.com/showthread.php?t=2432476 cause as far as I know there's no root for 4.4.2 yet

Drachenminister said:
Have you tried http://forum.xda-developers.com/showthread.php?t=2432476 cause as far as I know there's no root for 4.4.2 yet
Click to expand...
Click to collapse
I had tried lg flash tool before and it had stopped at 15% because of a usb connection problem, but i am going to try again. Thank you...

Drachenminister said:
Have you tried http://forum.xda-developers.com/showthread.php?t=2432476 cause as far as I know there's no root for 4.4.2 yet
Click to expand...
Click to collapse
I have a question,
About My phone, Before installing Kitkat:
D802 İnternational (Turkey)
after installed Kitkat, a vodafone amblem started to appear every time the phone i turned the phone.
What does it mean?
Which stock firmware, i have to install?
Thanks

there is a link in the OP of that thread leading to 4.2.2 firmwares. Look it up, there is one for Turkish d802 too http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Turkey/
Just check whether you have 16GB or 32GB version

Root for 4.4.2 is possible - if you flash the stock ROM as a zip file in custom recovery from 4.2.2 (which will be overwritten after the flash)
then you can directly flash the supersu zip:
1. boot into 4.2.2 custom ROM
2. install 4.4.2 zip and don't reboot
3. install supersu zip - don't reboot
4. wipe data, cache and dalvik-cache - then reboot
For zips you can use the forum-search function
There's also a custom boot-partition which enables to stay on the old custom recovery, but that's only made for B-Devices...

Drachenminister said:
Have you tried http://forum.xda-developers.com/showthread.php?t=2432476 cause as far as I know there's no root for 4.4.2 yet
Click to expand...
Click to collapse
Thank you so much
Finally SOLVED!
After you told that i can not root 4.4.2, i completely focused on flash tool with the help of your link.
Finally after 5 days, using the phone with mouse, now i can use the touchscreen again.
Thank you so much again

Great, glad I could help

Related

[Q] Verizon Note 3 Rom Help

Hi Guys I'm trying to install a custom Rom on my phone but have failed 4 times now and have to reach out to the forum for help. I'm on 4.4.2 ota and have rooted w/ towel root sucessfully, installed safestrap 3.72 and 3.75, busybox and super su. I advance wipe and do a clean install. Everytime it says it was successful but when I reboot the screen goes black and does noting. The phone remains on but nobodys home. I've tried the Jasmine rom and the alliance rom with the same results. I used odin to go back to stock but I want a custom rom. Can anybody help? I've attached a screenshot of my about phone. Also can anybody recommend a Rom that helps with the signal/gps issues that started after KK?
Thanks in Advance!
cjacobs611 said:
Hi Guys I'm trying to install a custom Rom on my phone but have failed 4 times now and have to reach out to the forum for help. I'm on 4.4.2 ota and have rooted w/ towel root sucessfully, installed safestrap 3.72 and 3.75, busybox and super su. I advance wipe and do a clean install. Everytime it says it was successful but when I reboot the screen goes black and does noting. The phone remains on but nobodys home. I've tried the Jasmine rom and the alliance rom with the same results. I used odin to go back to stock but I want a custom rom. Can anybody help? I've attached a screenshot of my about phone. Also can anybody recommend a Rom that helps with the signal/gps issues that started after KK?
Thanks in Advance!
Click to expand...
Click to collapse
You need to flash the NC2 kernel via odin. File and instructions can be found here. When following the steps in the OP you can substitute the rom you want for the one you can download from the post.
Also incase you didn't see it in the Safestrap OP you will only be able to use the stock rom slot, if trying to flash on a created slot it won't boot properly or at all (rom slots are only supported on NC2 firmware and previous, the ota is NC4).
Hope this helps.
That's great thank you very much for your help!
Do I just flash the kernal over my stock rom?
cjacobs611 said:
Do I just flash the kernal over my stock rom?
Click to expand...
Click to collapse
To be safe you might want to flash the rooted stock rom provided in the post I linked earlier. That rom is the NC4 stock with pre-root and a couple other tweaks Basically the same as OTA but better. Just follow the steps in the OP and you'll be good to go (if you haven't already).
thank you
My pleasure.
Ok I'm sorry I'm still confused. The OP doesn't say to flash with Odin anywhere it says flash with Safe strap. Do I flash the firmware with Odin first then Rom?
cjacobs611 said:
Ok I'm sorry I'm still confused. The OP doesn't say to flash with Odin anywhere it says flash with Safe strap. Do I flash the firmware with Odin first then Rom?
Click to expand...
Click to collapse
Anything firmware, kernel or modem related must be flashed in Odin as long as we have a locked bootloader. Just follow the steps as instructed and you'll be fine.
Sent by Darkseid from Apokolips

[Q&A] >>>>VZW Retail Stock ROMs--KitKat 4.4.4--NI2 {Powered by SuperSU}

[Q&A] >>>>VZW Retail Stock ROMs--KitKat 4.4.4--NI2 {Powered by SuperSU}
Q&A for >>>>VZW Retail Stock ROMs--KitKat 4.4.4--NI2 {Powered by SuperSU}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for >>>>VZW Retail Stock ROMs--KitKat 4.4.4--NI2 {Powered by SuperSU}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I'm in ni2 stock room , what I need to do ?
And Can u add Arabic language to the rom?
alaqswaa said:
I'm in ni2 stock room , what I need to do ?
And Can u add Arabic language to the rom?
Click to expand...
Click to collapse
Other than the apps out there to add other languages it only comes with what is included with the stock build. As for the other apps I suggest you search the Play Store or here on XDA for other options.
thank you
SuperSU binary can't be installed after update
HI I've searched the thread and couldn't find any matches, so... I had my verizon gs5 rooted with towel root but when it updated 2 days(ish) ago it un rooted and towel root says in compatible and supersu says binary can't be installed. is there help for this. sorry if i've over looked it some where. Thanks for any direction you can give
B. J. said:
HI I've searched the thread and couldn't find any matches, so... I had my verizon gs5 rooted with towel root but when it updated 2 days(ish) ago it un rooted and towel root says in compatible and supersu says binary can't be installed. is there help for this. sorry if i've over looked it some where. Thanks for any direction you can give
Click to expand...
Click to collapse
Download the files here.
You will need to use Odin to flash the G900V_NCG_Stock_Kernel.tar.md5 file and then reboot and run towelroot again. After that enter download mode again and Odin NI2_stock_kernel.tar.md5 and reboot. Then install busybox and then safestrap and flash the rom from safestrap.
Misterxtc said:
Download the files here.
You will need to use Odin to flash the G900V_NCG_Stock_Kernel.tar.md5 file and then reboot and run towelroot again. After that enter download mode again and Odin NI2_stock_kernel.tar.md5 and reboot. Then install busybox and then safestrap and flash the rom from safestrap.
Click to expand...
Click to collapse
I can only find safestrap for the NCG firmware - is that safe to use the NI2? If so, then that's awesome!! If not...well... how do then get a custom ROM and/or recovery installed on my Verizon GS5 with NI2? Thanks!!!
papadelogan said:
I can only find safestrap for the NCG firmware - is that safe to use the NI2? If so, then that's awesome!! If not...well... how do then get a custom ROM and/or recovery installed on my Verizon GS5 with NI2? Thanks!!!
Click to expand...
Click to collapse
Yes, I have the best one to use in the zip file I linked.
Got 'em, thanks!
ODIN isn't working
Thanks soo much for answeing me! i tried to use odin to flash the stock kernel but when i opened it with my phone in custom os mode the number 0:COM 4 came up and no option to open any thing else. i watched a video about it and the guy said odin should be 0:com 5 or 10. What do i need to do differently?
B. J. said:
Thanks soo much for answeing me! i tried to use odin to flash the stock kernel but when i opened it with my phone in custom os mode the number 0:COM 4 came up and no option to open any thing else. i watched a video about it and the guy said odin should be 0:com 5 or 10. What do i need to do differently?
Click to expand...
Click to collapse
As long as it says connected you should be good to go. Also this won't work on a Mac so make sure you are on a PC.
Stuck in android is upgrading
[QUOTE=Misterxtc;57454188
HI! Thanks so much for the links! I started to follow your directions, i flashed the NCG one and now my phone has been stuck on a black screen saying "android is upgrading optimizing app 3 of 12 for about 20 mins. I'm so sorry to keep bothering you but could you tell me what to do now? i tried taking the battery out but it's still the same thing when it powers back on. Thanks again
I have Safestrap installed, rooted using Towelroot, SuperSU installed.
When I try to install a ROM in to a ROM-slot, I do the factory wipe on that slot the install the zip...it says it succeeds but rebooting to that slot only gets me a black screen. I have to remove the battery to reboot, go in to Safestrap Recovery, and revert to the Stock ROM.
Am I missing a step? Any idea what is going wrong?
papadelogan said:
I have Safestrap installed, rooted using Towelroot, SuperSU installed.
When I try to install a ROM in to a ROM-slot, I do the factory wipe on that slot the install the zip...it says it succeeds but rebooting to that slot only gets me a black screen. I have to remove the battery to reboot, go in to Safestrap Recovery, and revert to the Stock ROM.
Am I missing a step? Any idea what is going wrong?
Click to expand...
Click to collapse
Chopstix9 said:
If you would have read numerous threads on the issue you would have known. Instead you found out the same way I did some weeks ago!! There are known bug issues with Safestrap that cause the problems you are experiencing when using a rom slot. Use the stock slot only and all will work well. Yes, this means you have to wipe out your stock S5 system, but you can always odin back to stock.
Click to expand...
Click to collapse
^^
papadelogan said:
I have Safestrap installed, rooted using Towelroot, SuperSU installed.
When I try to install a ROM in to a ROM-slot, I do the factory wipe on that slot the install the zip...it says it succeeds but rebooting to that slot only gets me a black screen. I have to remove the battery to reboot, go in to Safestrap Recovery, and revert to the Stock ROM.
Am I missing a step? Any idea what is going wrong?
Click to expand...
Click to collapse
Use this updated version of SafeStrap. The reboot issue has been fixed when using ROM slots in this version. Uninstall your current version first and then install the updated one. You may need to install SafeStrap to uninstall it if it isn't in your app drawer.
I have read some threads but obviously not enough.
I believe that I can only use touchwiz ROMs with Safestrap, is that correct? That basically means no AOSP roms are available to me. I ran LiquidSmooth on my s3; any suggestions on what would be the closest to that in a TouchWiz ROM?
papadelogan said:
I have read some threads but obviously not enough.
I believe that I can only use touchwiz ROMs with Safestrap, is that correct?
Click to expand...
Click to collapse
Yes.
papadelogan said:
I have read some threads but obviously not enough.
I believe that I can only use touchwiz ROMs with Safestrap, is that correct? That basically means no AOSP roms are available to me. I ran LiquidSmooth on my s3; any suggestions on what would be the closest to that in a TouchWiz ROM?
Click to expand...
Click to collapse
Eclipse is as close to AOSP that you will get on the S5. @nitroglycerine33 did a beautiful job at it so give it a try.
I just came across that one and will be trying it later today. Thank you!!
Messed up NK2 stock ROM
I purchased my S5 yesterday and the phone was updated to NK2 at the store. I then proceeded to root NK2 by Odin flashing the NCG stock kernel, rooting with towelroot, and then Odin flashing the NK2 stock kernel. I've attached a image that shows my current Baseband and Build. Here's where I messed up: Before doing the smart thing of installing Safestrap Recovery v3.75 and doing a backup of the stock rom slot, I went ahead and installed Titanium Backup and restored all of the apps+data from my old LG G2 (that part's fine) as well as accidentally restoring some of the LG G2 system settings (I really only wanted to restore my SMS/MMS and Call Logs, but sadly I did more than that). The result is that I'm getting a bunch of "Unfortunately, Settings has stopped" crashes when I go into certain System Settings menus (e.g., "Blocking Mode" or "Notification Panel --> Related Apps"). I'd like to simply wipe the phone and start over and I know that a simple "Factory Data Reset" won't fix things for me. I'd like to Odin flash back to the "stock, rooted NK2' state, but I'm not sure where to find that download and what, if anything, I need to do to prep my phone to get it back into that state. Can I do that with an Odin flash of the "Download NK2 Odex" in Post#2? Or do I need to install Safestrap and flash it into the "Stock Rom Slot" from there?
Sorry I'm so confused.

Stock ROM Backup

Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
pmlfrew said:
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
Click to expand...
Click to collapse
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Racinghart91 said:
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Click to expand...
Click to collapse
Thanks will flash to lollipop today then....
pmlfrew said:
Thanks will flash to lollipop today then....
Click to expand...
Click to collapse
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
pmlfrew said:
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
Click to expand...
Click to collapse
I got it working by flashing the German non branded ROM... Got the error message again but then used a "All samsung recovery.tar" as stated on another post in here and it booted fine eventually... Now on Lollipop. Now time to flash with TWRP.... Again!!!
Please, i need help !
I need help, urgently !
My Note 4 SM-N910C does not work. I can enter the Recovery and the Download Mode. When attempting to install a Custom ROM gives me an error that says I have no data. In the internal memory I have 0mb.
I tried using odin, but I can not .. Salta error.
Someone who can make a backup of your phone (which is factory), leave me a link to download it? So I install the TWRP. Please.
They have another solution?
Thank you.:good:

Xposed and Safestrap on Lollipop?

I recently upgraded today from 4.4.2 to 5.0 OC4 and kept root using this method: http://forum.xda-developers.com/ver...0-keeproot-t3068546/post59791648#post59791648
However, I had no Idea it would be so hard (impossible?) to get xposed back. Is there any way in which I could install xposed ARM without having a custom recovery on my verizon G900V running lollipop?
I also read an article on another website that said you can flash safestrap with odin, go into safestrap, install anything necessary, and then reflash current ROM? I am not TOO knowledgable with all of this, however I have found my way around all this enough to ensure myself root and all needed features. Any help or information would be amazing.
Article: http://www.droidforums.net/threads/galaxy-s5-safestrap-after-the-lollipop-update.279867/
I was considering flashing the xposed ARM file with flashfire, however I read someone else was stuck in a bootloop who tried this. Would this not work? Is there any method? I was also looking into flash gordon which lets you flash .zip files without requiring custom recovery. Thanks!
EDIT: Just did some more research and found this thread: http://forum.xda-developers.com/galaxy-s4-att/general/nc1-flasher-odin-to-safestrap-t3082620
It seems as if its possible, however this thread is for the OC3 version, while I flashed the OC4... Anyone out there done anything like this before, or knows how to provide the needed steps? Thanks again.
Go to the xposed thread and read any comment at all. It doesn't work on touchwiz based lollipop architecture. PERIOD. you didn't need a new thread in this forum to learn that...
I see, is there some way that I could downgrade. I've been looking into that for awhile now to go back to my 4.4.2 but there's a ton of methods and I am not sure which is required for my device. I canno't seem to find a specific method for my g900v s5. Thanks for you're reply, and I hope I can downgrade.
synkro1 said:
I see, is there some way that I could downgrade. I've been looking into that for awhile now to go back to my 4.4.2 but there's a ton of methods and I am not sure which is required for my device. I canno't seem to find a specific method for my g900v s5. Thanks for you're reply, and I hope I can downgrade.
Click to expand...
Click to collapse
You can use this guide: http://forum.xda-developers.com/showthread.php?t=3088571 it might need some modification for 4.4.2, however.
synkro1 said:
I see, is there some way that I could downgrade.j I've been looking into that for awhile now to go back to my 4.4.2 but there's a ton of methods and I am not sure which is required for my device. I canno't seem to find a specific method for my g900v s5. Thanks for you're reply, and I hope I can downgrade.
Click to expand...
Click to collapse
You can go up and down as often as you like. I would Odin the NCG tar from the link below and reroot.
You probably still have safestrap. You could try this first. Go to download mode and Odin the NE9 kernel. When your phone starts booting up you should see the safestrap option to boot into recovery. Boot into recovery, install a rooted NE9 ROM of your choice. Boot back into download mode via safestrap and Odin the NE9 firmware. Let your phone boot all the way up and you should be good to go. Use NCG kernels and firmware-roms if you would rather be on NGC.
http://forum.xda-developers.com/ver...ment/stock-collection-kernels-modems-t2842069
If safestrap doesn't show up, Odin the full NCG tar file and reroot your phone.
Thanks so much for your help, the only problem is I never installed safestrap on my phone. So I do not currently have safe strap, or any custom recovery. So i can just use the odin method then, correct?
[PHP[/PHP]
synkro1 said:
Thanks so much for your help, the only problem is I never installed safestrap on my phone. So I do not currently have safe strap, or any custom recovery. So i can just use the odin method then, correct?
Click to expand...
Click to collapse
Yes, sir. That would be correct. Since you are rooted, there is an app called Flashfire you could use that doesn't even require a computer but if you are familiar with Odin that is a good way to go as well.
I have flashfire installed, in fact I used it to upgrade to lollipop. What settings should I use with flashfire to downgrade to lollipop? Do i have to clear cache or anything? And will the file from the notes #4 from here work?: http://forum.xda-developers.com/ver...0-keeproot-t3068546/post59791648#post59791648
synkro1 said:
I have flashfire installed, in factj I used it to upgrade to lollipop. What settings should I use with flashfire to downgrade to lollipop? Do i have to clear cache or anything? And will the file from the notes #4 from here work?: http://forum.xda-developers.com/ver...0-keeproot-t3068546/post59791648#post59791648
Click to expand...
Click to collapse
What ROM do you want to have on your phone?
Just a normal stock 4.4.2 ROM works fine for me.
synkro1 said:
Just a normal stock 4.4.2 ROM works fine for me.
Click to expand...
Click to collapse
Download this ROM onto your SD card. I prefer deodex
http://forum.xda-developers.com/showthread.php?t=2793931
Download the NGC retail firmware from here.
http://forum.xda-developers.com/ver...ment/stock-collection-kernels-modems-t2842069
In Flashfire, select firmware and navigate to your firmware. Just check boot and recovery
Next select zip-ota, navigate to your ROM. Leave auto mount unchecked.
Select firmware again. This time check boot, recovery, modem, and firmware. Flashfire will ask if you want them in separate zips. Click yes
Now select wipe. Check everything but SD card.
Now arrange everything in this order
Wipe
Firmware-boot recovery
Zip-rom
Firmware modem firmware
Firmware-boot recovery
Ever root- inject supersu
Boot normal
That should do it. You should be rooted on 4.4.2
Tulsadiver said:
Download this ROM onto your SD card. I prefer deodex
http://forum.xda-developers.com/showthread.php?t=2793931
Download the NGC retail firmware from here.
http://forum.xda-developers.com/ver...ment/stock-collection-kernels-modems-t2842069
In Flashfire, select firmware and navigate to your firmware. Just check boot and recovery
Next select zip-ota, navigate to your ROM. Leave auto mount unchecked.
Select firmware again. This time check boot, recovery, modem, and firmware. Flashfire will ask if you want them in separate zips. Click yes
Now select wipe. Check everything but SD card.
Now arrange everything in this order
Wipe
Firmware-boot recovery
Zip-rom
Firmware modem firmware
Firmware-boot recovery
Ever root- inject supersu
Boot normal
That should do it. You should be rooted on 4.4.2
Click to expand...
Click to collapse
Ur amazing. I'll try it and let you know. Thanks so much for your help.
Thanks so much! It worked perfectly! I had a problem initially after installing towelroot and xposed and got an error when rebooting the phone called "Process system isn't responding". My phone kept freezing and was super slow because of this. I believe it was due to me restoring contacts from titanium backup. I restored the contacts system app as a whole. I didn't realize that at the time however, and just system restored my phone again, and did everything the same yet didn't restore my contacts, and the message is now gone. I am not running root with xposed on 4.4.2. Your amazing!

help please my lg g2 touch screen does not respond

i have rooted my lg d80020Y ans installed a lollipop Europe rom.the problem is the touch screen doesnt response and i coudent unstalled rhe rom
please help me and im sory fo my bad english:crying:
i have a bad respond on my screen i need help haw i can fix this problem
i traied to bachups from recovery but touchscreen doesnt respond when i swape
lg g2 touch missbehave after update
froyo18 said:
i have a bad respond on my screen i need help haw i can fix this problem
i traied to bachups from recovery but touchscreen doesnt respond when i swape
Click to expand...
Click to collapse
check out this video if u have same isssue as shown in video.
froyo18 said:
i have a bad respond on my screen i need help haw i can fix this problem
i traied to bachups from recovery but touchscreen doesnt respond when i swape
Click to expand...
Click to collapse
mmm could it be a refurbished phone? and flashing wrong rom if motherboard says its a different model then touch problems appears.
thanks i have resoved the problem
yes it was a wrong rom
i have an other quoetion no im in algeria and i want to ubdate my phone without a AT&Tsim card
froyo18 said:
thanks i have resoved the problem
yes it was a wrong rom
i have an other quoetion no im in algeria and i want to ubdate my phone without a AT&Tsim card
Click to expand...
Click to collapse
what android you have right now,?
I have 4.4.4 KitKat
I want to updat lollippop
Befor was d80020y after fixing the problrm was d80020c
Sory KitKat 4.4.2
I have 4.4.2 KitKat
I want to updat lollippop
Befor was d80020y after fixing the problrm was d80020c
froyo18 said:
I have 4.4.2 KitKat
I want to updat lollippop
Befor was d80020y after fixing the problrm was d80020c
Click to expand...
Click to collapse
okey you need to root, and install autorec. and also download blastagator twrp thermal.
http://forum.xda-developers.com/showthread.php?t=2663369
read where it says KK Download Installer - KitKat 4.4.2 D80020c it has root and auto rec. links
http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
download twrp 2.8.7.3
and download this flashable kdz stock 5.0.2 rom
http://forum.xda-developers.com/att-g2/development/rom-t3152368
when you download everything and have rooted and twrp recovery in KK let me know
i want the official update
froyo18 said:
i want the official update
Click to expand...
Click to collapse
thats official, but its slimmed and has root only..
if you need other official then . search for it. idk.
Thanks
How i f flash this ROM
froyo18 said:
Thanks
How i f flash this ROM
Click to expand...
Click to collapse
whats your status with you phone right now? did you installed KK? did you rooted? did you installed autorec for KK.
yes i do
froyo18 said:
yes i do
Click to expand...
Click to collapse
please be more explicit. like yes am on KK rom already rooted and have twrp.?
if you are rooted and have twrp are in kitkat..
use the links i provided in the other messages i sent you before this.
enter recovery. button vilume down and power at same time, at LG logo release power, then press again. select on white screen yes twice this should take you to recovery. or download quick rreboot app.
1. flash bootstacks 5.02 KK-bumped for you variant i thikn you have d800 make sure its for your model.
2.dont reboot to system go to main menu/ reboot into recovery from recovery.
3. install the slimmed official rom for d800. it has root, and can take ota updates if AT&T sim is used.
4. go to playstore download autorec for lollipop for d800 install.
5. install thermal twrp 2.8.7.3 again. reboot to system, then you are done you have lollipop. rooted and thermal recovery...
if you want to flash a custom STOCK rom, not CM or ASOP this are different. if you want stock custom rom 5.0.2 just wipe all in recovery. copy rom you want to install while in twrp. then install and thats it you have custom stock rom if you want to.
raptorddd said:
please be more explicit. like yes am on KK rom already rooted and have twrp.?
if you are rooted and have twrp are in kitkat..
use the links i provided in the other messages i sent you before this.
enter recovery. button vilume down and power at same time, at LG logo release power, then press again. select on white screen yes twice this should take you to recovery. or download quick rreboot app.
1. flash bootstacks 5.02 KK-bumped for you variant i thikn you have d800 make sure its for your model.
2.dont reboot to system go to main menu/ reboot into recovery from recovery.
3. install the slimmed official rom for d800. it has root, and can take ota updates if AT&T sim is used.
4. go to playstore download autorec for lollipop for d800 install.
5. install thermal twrp 2.8.7.3 again. reboot to system, then you are done you have lollipop. rooted and thermal recovery...
if you want to flash a custom STOCK rom, not CM or ASOP this are different. if you want stock custom rom 5.0.2 just wipe all in recovery. copy rom you want to install while in twrp. then install and thats it you have custom stock rom if you want to.
Click to expand...
Click to collapse
thank you very much
froyo18 said:
thank you very much
Click to expand...
Click to collapse
please help
i dont knaw how my phone reboot before i install the slim lollipop
ans he write secure booting error
froyo18 said:
please help
i dont knaw how my phone reboot before i install the slim lollipop
ans he write secure booting error
Click to expand...
Click to collapse
thats something wrong with bootloader.
go back to stock again.
go into download mode and flash
KK 4.4.2 tot or kdz. the one you used.
then root/use autorec for KK
use the 5.0.2 Bootstack with KitKat (Bump) bootloader: https://github.com/lg-devs/bootstack...ump-signed.zip
once you flash that reboot into recoveryy from recovery.once you reboot phone and takes you to recovery flash official slimmed LP rom. it should work.. something you flashed or didt follow steps.
raptorddd said:
thats something wrong with bootloader.
go back to stock again.
go into download mode and flash
KK 4.4.2 tot or kdz. the one you used.
then root/use autorec for KK
use the 5.0.2 Bootstack with KitKat (Bump) bootloader: https://github.com/lg-devs/bootstack...ump-signed.zip
once you flash that reboot into recoveryy from recovery.once you reboot phone and takes you to recovery flash official slimmed LP rom. it should work.. something you flashed or didt follow steps.
Click to expand...
Click to collapse
the reboot to recovery who chause de error
so i want to knaw if i just go back ans intall the rom or it will be necessary to reboot to recovery after use bootloader

Categories

Resources