Related
Hello everyone, Im new here so please dont kill me if this is a common question. I have searched all over but cant find the answer I need. Im excited to learn from all the wonderful information here and cant wait to get started.
Anyway, I had a Nexus S 4g flashed to work on Boost. I would like to root it so that I can change some things. However, I do not know if my phone was previously rooted. Is there anyway to find out? If it was, and I rooted it again, would that cause problems? Also, does rooting the phone cause problems with the flashing, or will it keep all of the necessary network information intact (so that it doesnt screw up my service)?
Rooting doesn't cause problems with the flashing, it just -potentially- opens up the system to damage. This is a user responsibility and not a fault of the rooting process; it's a possibility of having too much power over the system.
Most likely it would have had the bootloader unlocked and have been rooted. Turn off the phone and turn it on again by holding Vol. Up and Power simultaneously for a few seconds. If it was rooted, the best way to know is if it says "bootloader unlocked" in the upper half of the screen. If not, there is a high chance it isn't CURRENTLY rooted. If it is unlocked, the most work you need to give root access to android is going into recovery and installing a .zip file.
Exactly so after finding that out just look over one of the many guides we have here at XDA to flash the superuser package.
Sent from my Nexus S
I didnt see anything saying unlocked. I see 'Lock State - Locked', so Im assuming this means that it is not currently rooted. I guess now I will go through some guides and learn which method would be best for me. Thanks for the quick reply and help.
Most likely you aren't rooted either - you can test by typing "su" in terminal emulator.
Just remember if u unlock bootloader the internal data and sdcard will all be deleted.
Sorry if this is a repeated question, but have been looking for the answers all over the forum and have failed to find any up-to-date answers.
As the title stated I have an at&t motorola atrix 4g that is running the original gingerbread 2.3.6 build 4.5.141. I have managed to finally root it but I have been finding contradicting information on whether the bootloader can be safely unlocked and exactly how to do it. Does anyone have any recent info or insight on this? If it can be done, does anyone have an opinion on what they consider to be the best ROM manager or best ROM and why? Does anyone know much about the ClockworkMod Touch Recovery? I have worked with other phones but obviously don't know diddly about this one, but I do respect the opinions of the other members on this site. I have always been impressed by the amount of knowledge this group holds, as well as the quality. Any help is greatly appreciated.
Hope this helps...
I don't know about unlocking the bootloader on .141 but I've had it unlocked since I got the phone last year. And once it's unlocked you can't re-lock it (even if you flash another ROM and the "unlocked" text disappears from the boot screen.
I'm sure there are several ways to arrive at 141 with unlocked boot loader and root with touchrecovery but this is what I did.
First, I used RSD Lite to flash the .91 sbf on my phone and return it to stock.
Second, I used the Auto-Unlock script found on this thread. AutoUnlock Script
Third, I used the OneClickRoot script found on this thread. One Click Root Script
Fourth, I followed UncleCemka's instructions to use Moto-Fastboot to upgrade the boot, system and webtop partitions to the stock .141 versions and then reobtained root found on this thread. Upgrade from .91 to .141 Safely thread
Finally, I downloaded the ClockworkMod Touch Recovery image file from the ClockworkMod website and used moto-fastboot to erase the recovery partition and then flash the touchrecovery.img file over to my phone. You can find the touch recovery image at this website. http://www.clockworkmod.com/rommanager
So now I have an unlocked bootloader on my rooted Atrix running stock .141 software with the ClockworkMod Touch Recovery image.
Thanks sjmoreno.
A "rollback/degrade" may be the only way, I'm just hoping that someone has done it straight from the new version. It may just be wishful thinking on my part.
Here's a thread about a guy who unlocked his boot loader on 2.3.6…theres also a guide in there. Hope you find it helpful
http://forum.xda-developers.com/showthread.php?t=1515954
For the unlocking portion I was on 4.5.141 and I used the method below successfully. Do not get alarmed because you most likely will get the "failed to boot 0x1000" error but just follow the onscreen instructions. The program does everything for you, the only command you really type in is your specific device ID. It was very easy, just read the recent posts from the thread. Good luck!
http://forum.xda-developers.com/show....php?t=1182871
I use CWM and I have had no problems with it so far. I have been running jokersax CM9 roms since I unlocked and I love it. Hope this helps.
kotchishm said:
For the unlocking portion I was on 4.5.141 and I used the method below successfully. Do not get alarmed because you most likely will get the "failed to boot 0x1000" error but just follow the onscreen instructions. The program does everything for you, the only command you really type in is your specific device ID. It was very easy, just read the recent posts from the thread. Good luck!
http://forum.xda-developers.com/show....php?t=1182871
I use CWM and I have had no problems with it so far. I have been running jokersax CM9 roms since I unlocked and I love it. Hope this helps.
Click to expand...
Click to collapse
Thanks for the help but the link seems to be dead.
GatMaster45 said:
Thanks for the help but the link seems to be dead.
Click to expand...
Click to collapse
Sorry here is the link
http://forum.xda-developers.com/showthread.php?t=1182871
Thanks
I just wanted to say thanks for all the help and info. There is no way I would have been able to get by without your help. I did complete the unlock and root of my phone. I guess I now get to figure out how to use CWM and install ROMs.
Thanks again.
If you want help with using cwm and installing roms pm me and ill help you out
GatMaster45 said:
I just wanted to say thanks for all the help and info. There is no way I would have been able to get by without your help. I did complete the unlock and root of my phone. I guess I now get to figure out how to use CWM and install ROMs.
Thanks again.
Click to expand...
Click to collapse
I'm also doing what you did a few months ago with my atrix...I wanted to ask... Which method of the 2 shown above did you end up using when you unlocked your bootloader?
so i don't post on this site ever, and i know next to nothing about rooting a phone aside from what i read
i just hit it up this for info on rooting my atrix i aquired... long story short i found a beta program called rescue root that works
i just rooted my bell atrix 4g, gingerbread 2.3.6, build 4.5.2a-51_oll-17.8
all i did was install motorola device manager program from the moto site, installed rescue root, connected my device and ran the program and rooted in under 10 mins, confirmed by root checker app, titainium backup and other various app requiring superuser permission
also i did not have to unlock the boot loader before i ran the program
robyn402 said:
so i don't post on this site ever, and i know next to nothing about rooting a phone aside from what i read
i just hit it up this for info on rooting my atrix i aquired... long story short i found a beta program called rescue root that works
i just rooted my bell atrix 4g, gingerbread 2.3.6, build 4.5.2a-51_oll-17.8
all i did was install motorola device manager program from the moto site, installed rescue root, connected my device and ran the program and rooted in under 10 mins, confirmed by root checker app, titainium backup and other various app requiring superuser permission
also i did not have to unlock the boot loader before i ran the program
Click to expand...
Click to collapse
u still have to unlock to flash custom roms. so it dosent really matter
rev.
you have to unlock the bootloader to flash roms? i must have misunderstood what i read...
i thought you had to unlock the bootloader first in order to root... not root in order to unlock the boot loader, guess i'll hit up moto's website again as theres a unlock your boot loader option there
but either way, just thought i'd share a new quick root method with the world that caters to those less technically gifted like me
i guess they only just released this beta and turns out the developer is actually just across town from me which is kinda cool
forgive the newbish excitment i only just snagged this phone off ebay since i bricked my old android by deleting things i shouldn't have without backing up first
Hai_Duong said:
u still have to unlock to flash custom roms. so it dosent really matter
Click to expand...
Click to collapse
I think you have it all completely mixed up.
You have to unlock the bootloader to be able to flash custom ROMs. Rooting is completely separate and has nothing to do with anything else - you don't need to unlock anything to root, and rooting won't help you get anything else (unlocking, flashing) done. It is literally completely separate.
It would probably help you to do more reading on the subject. Getting informed and educated can only ever be a good thing.
Here is the Droid Razr HD software update. I have not tested it as I use CM 10.1 and have no interest in going back to stock. I found it on www.droidrzr.com in a forum post then shared it on my dropbox account.
I posted it on my Dropbox account so not sure how long it will last until the link is gone:
https://www.dropbox.com/s/d2x9vutel4vnqmm/Blur_Version.9.16.6.XT926.Verizon.en.US.zip
It does "fix" the bootloader unlock exploit though
http://www.droid-life.com/2013/07/1...the-kernel-exploit-for-unlocking-bootloaders/
scoobaspeaz said:
Here is the Droid Razr HD software update. I have not tested it as I use CM 10.1 and have no interest in going back to stock. I found it on www.droidrzr.com in a forum post then shared it on my dropbox account.
I posted it on my Dropbox account so not sure how long it will last until the link is gone:
https://www.dropbox.com/s/d2x9vutel4vnqmm/Blur_Version.9.16.6.XT926.Verizon.en.US.zip
Click to expand...
Click to collapse
So, stock recovery to install this?
I would assume you would need to be 100% stock, including the recovery, to install this.
scoobaspeaz said:
I would assume you would need to be 100% stock, including the recovery, to install this.
Click to expand...
Click to collapse
hmm put it on my internal storage and its not found, I think stock recovery wants to see it on a sdcard.
If your boot loader is unlocked before the update, it should stay unlocked. You just will not be able to unlock with methods out there now.
Sent from my Razr HD using xda app-developers app
I received the OTA today on my Max HD. It was build 9.18.79.
Sent using xda premium
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
LifeAsADroid said:
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
Click to expand...
Click to collapse
There are 2 different versions, depends on what System version you have of 4.1.2 on the XT926 only. The 9.18.79 version would indicate that your Systems version is 9.16.6 if this is not correct DO NOT FLASH. I am Rooted/Unlocked, if you take the plunge you must OTA Rootkeeper/SuperSU backup SU, as the update breaks Root> IF there is no backup of SU with the latest binaries. If you lose Root, there are a couple of ways to Downgrade. A common problem for those of us Root/Unlocked the Update FAILs at the end. Most of the Update goes through, however the new Radio does not go through, as of right now if you Update and your Baseband is VANQUISH_BP_100730.081.64.09P then you have the OLD radio, the new Radio is VANQUISH_BP_100730.160.64.15P.
Between the 2 OTA's these should match-up as either 9.16.6 = 9.18.79 or 9.16.9 = 9.20.1
Thanks for the reply! A few more questions if you don't mind (would hate to do something wrong... like I did last time... luckily I was able to revert back to an original version and fix the install... sigh...):
4) With protecting root, I need the SuperSU Pro version, yes? To be able to use the survival mode, yes? Will Voodoo OTA Rootkeeper do the same thing? Is it possible to use both "to be sure"?
5) I have everything backed up with Titanium Backup. Should I bother getting the pro version and backing everything up using the cloud backup and hypershell? Or won't this matter since if root doesn't keep I won't be able to use Titanium Backup?
6) I also have performed the VZW Wireless Hotspot hack using SQLite. Am I going to have to undo the hack in order for the OTA update to work?
Thanks again for all your help!
Update - I decided to attempt the update and hope for the best. System update 9.18.79.xx updating from 9.16.6.xx.
I purchased the SuperSU Pro from the Play Store, and used the survival mode in SuperSU. I also used the Voodoo OTA Rootkeeper and protected root. I figured if one didn't work the other might... Voodoo worked to protect and re-install root access (not sure about SuperSU as I tried Voodoo first to restore root after the install).
I am unsure if the bootloader is still unlocked, but from what people have said there doesn't seem to be a reason to believe it is re-locked. I haven't tested it out to know for sure though.
It appears that the entire update installed correctly. No errors, and the baseband version was updated to the new radio (xxx.15P).
I did not undo the VZW Wireless Hotspot hack prior to installing the update.
Hopefully this post helps others out there.
My final question... what does updating the radio/baseband do exactly?
i need help! i tried installing the update but i forgot i had TWRP.. so the update did not got installed, i rebooted the phone, but the OS tried to install the update again and inmediatly reboot the phone in recovery again .. then from recovery i flashed liquid smooth rom but i got stuck in the boot animation... my big issue is that my power button is broken! now i cant reset the phone to enter in fastboot mode.. i cant do anything... now my battery is totally drained and i cant turn on the phone (my power button does not work).. i can plug the usb cable and the led turns green. but i dont see any more options
rodmc123 said:
i need help! i tried installing the update but i forgot i had TWRP.. so the update did not got installed, i rebooted the phone, but the OS tried to install the update again and inmediatly reboot the phone in recovery again .. then from recovery i flashed liquid smooth rom but i got stuck in the boot animation... my big issue is that my power button is broken! now i cant reset the phone to enter in fastboot mode.. i cant do anything... now my battery is totally drained and i cant turn on the phone (my power button does not work).. i can plug the usb cable and the led turns green. but i dont see any more options
Click to expand...
Click to collapse
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
KachowPow said:
There are 2 different versions, depends on what System version you have of 4.1.2 on the XT926 only. The 9.18.79 version would indicate that your Systems version is 9.16.6 if this is not correct DO NOT FLASH. I am Rooted/Unlocked, if you take the plunge you must OTA Rootkeeper/SuperSU backup SU, as the update breaks Root> IF there is no backup of SU with the latest binaries. If you lose Root, there are a couple of ways to Downgrade. A common problem for those of us Root/Unlocked the Update FAILs at the end. Most of the Update goes through, however the new Radio does not go through, as of right now if you Update and your Baseband is VANQUISH_BP_100730.081.64.09P then you have the OLD radio, the new Radio is VANQUISH_BP_100730.160.64.15P.
Between the 2 OTA's these should match-up as either 9.16.6 = 9.18.79 or 9.16.9 = 9.20.1
Click to expand...
Click to collapse
So any idea how one might fix this?
LifeAsADroid said:
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
Click to expand...
Click to collapse
I tried to take the 9.18.79 update I protected the root (I'm not unlocked) before I did so I also temporarily un-rooted (I've always been told to do this before and update) Now I an no longer rooted and it can't find any SU binary codes. Gonna have to flash back to 9.6.16 and try it again I guess or stay on 9.6.16 in order to maintain root for now. If you find a solution please share.
IDroidThere4Iam said:
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
Click to expand...
Click to collapse
I agree with Lenny. This same thing happened to me when I tried to take the liquid smooth ROM. Follow his instructions above. You'll lose all your pics, vids, files, etc. But at least you'll have a working phone again.
Went smoothly here
All my devices except this one are rooted and some are rom'd. I thought long and hard about whether to void this warranty but decided one day it would be out of updates from VZW and I would want to flash something. I have been denying the OTA for the last day so I figured now or never.
Here are the simple steps:
Download and install Moto device manager (for the USB drivers) here
Enable USB debugging in developer options on the phone
run motochopper here
run motoapocolypse here
install voodooOTA root keeper from Play and backup root
apply OTA
It went error free. The phone has the 15P radio update, unlocked BL and root.
larsdennert said:
It went error free. The phone has the 15P radio update, unlocked BL and root.
Click to expand...
Click to collapse
I want to confirm something, you unlocked the bootloader and then took the OTA and the bootloader remain unlocked (and stayed rooted due to root keeper)?
So the benefit to all this would be to get the new radio update?
bananapeapod said:
I want to confirm something, you unlocked the bootloader and then took the OTA and the bootloader remain unlocked (and stayed rooted due to root keeper)?
So the benefit to all this would be to get the new radio update?
Click to expand...
Click to collapse
Yes, the bootloader won't get locked again after it is unlocked. Moto would be shooting themselves having to reinstate warranties if they did that. Yes I wanted the option of flashing later becuase the ota will install sooner or later. I also want to stay on the upgrade path for now to have current radios.
I still have an Eris lying around that is long out of support but i have gb on it.
IDroidThere4Iam said:
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
Click to expand...
Click to collapse
that's what i want to do, but i cant because my power button is broken! so i cant enter to fastboot mode without the power button.. i will have to open my phone and try to fix the power button myself.
Just to make a point and to clear up any confusion, this Update will not lock the Bootloader. If you have an Unlocked Bootloader then you will have an Unlocked Bootloader after the update, regardless if it fully works or not, and even if you lose Root, the Bootloader will still be Unlocked. If Root is lost with an Unlocked Bootloader, I suggest downgrading through an FXZ of either 9.16.6 or 9.16.9 and restore Root.
Alright, so I finally found a Razr M that has the bootloader unlocked and went to root it and it wouldn't root. I booted into recovery and it has TWRP installed on it so I tried to install CleanRom and it failed and said something about it tried to patch something but I can get a picture if need be.
I'm kind of at a loss on what I need to do, bootloader is definitely unlocked since it has the splash screen and it says unlocked on the black screen (sorry don't know what it's called). It's on baseband .81P so if there is anything anyone could tell me I would greatly appreciate it.
collins521 said:
Alright, so I finally found a Razr M that has the bootloader unlocked and went to root it and it wouldn't root. I booted into recovery and it has TWRP installed on it so I tried to install CleanRom and it failed and said something about it tried to patch something but I can get a picture if need be.
I'm kind of at a loss on what I need to do, bootloader is definitely unlocked since it has the splash screen and it says unlocked on the black screen (sorry don't know what it's called). It's on baseband .81P so if there is anything anyone could tell me I would greatly appreciate it.
Click to expand...
Click to collapse
Which tool did you use to root? The first time I tried to root right after getting the phone, I had to wipe cache/dalvik and FDR. Also, since your BL is unlocked, you should just be able to flash a SU binary in TWRP and get root. I know there's one running around here somewhere.
RikRong said:
Which tool did you use to root? The first time I tried to root right after getting the phone, I had to wipe cache/dalvik and FDR. Also, since your BL is unlocked, you should just be able to flash a SU binary in TWRP and get root. I know there's one running around here somewhere.
Click to expand...
Click to collapse
I tried the Batman utility and also motofail2go
collins521 said:
I tried the Batman utility and also motofail2go
Click to expand...
Click to collapse
Motofail was for 4.1.1 and Motochopper was for 4.1.2 (this was included in the utility 1.20). Sometimes these things have to be run multiple times, at least that's what I've seen.
Here's Chopper by itself: http://www.droidrzr.com/index.php/topic/15208-root-motochopper-yet-another-android-root-exploit-412/ . However, you might have to wipe to get this to work, I did anyway. Before it comes to that, I would try to flash SU in recovery.
Thanks, flashed the SU Binary's and I'm up and running..now I have root and all is well in the world haha
Awesome! Been trying to solve that world peace issue like forever, man! Good deal!
Sent from my XT907 using Tapatalk 4 Beta
Lol now to get a 4.2.2 rom (Well maybe it isn't .2 I can't remember) to actually boot on here...can't seem to get it past the boot animation and I've flashed SlimBean, Chameleon, and another