Hi,
ROM: HyperDrive RLS15 (with AT&T Compatibility Pack.zip)
Baseband: MDL
I'm on AT&T, MDL base, HyperDrive ROM, and only issue I had with RLS15 is I had to put in the APN settings to get my 4G
data/internet working (my voice calls and text messaging were already okay and working).
However, now I realized I can't download incoming Multi-Media messages, like pictures via text for example:
this problem was present before I put in APN settings manually. I was wondering if anyone could direct me,
or knows the right APN settings I need for this, if any.
Thanks in advance for the help. :good:
Tried APNs
APN 1 (Up to 3.5G HSDPA/HSUPA only, 7.2mbps):
Name: Cingular
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,fota,dun
APN 2 (Up to 3.75G HSPA+ only, 21mbps):
Name: AT&T HSPA+
APN: phone
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,dun
APN 3 (LTE, ALL THE mbps):
Name: AT&T LTE
APN: pta
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,hipri,internet
APN 4:
Name: Cingular MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: mms
APN 5:
Name: AT&T LTE MMS
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: hipri,mms
Okay, So this APN works for everything I need.
Name: ATT HSPA+
APN: phone
Proxy: not set
Port: not set
Username: not set
password: not set
Server: not set
MMSC: http://mmsc.mobile.att.net
Multimedia message proxy: proxy.mobile.att.net
Multimedia message port: 80
MCC: 310
MNC: 410
Authentication type: not set
APN type: default,agps,supl,mms,hipri,internet *Note* no space
APN protocol: IPv4
Bearer: Unspecified
Mobile virtual network operator: None
Where do you change this information at?
Sent from my A100 using xda app-developers app
ive been wondering if phone or pta is better. phone is default and gives lte, but older lte phones used pta.
I read that this is common bug on older firmware TW version. Not telling you to update just try some version of KitKat from development section.
ms.journie said:
Where do you change this information at?
Sent from my A100 using xda app-developers app
Click to expand...
Click to collapse
Go to your
settings>more networks...>mobile networks>Acess Point Names "APNs"
Sent from my SAMSUNG-SGH-I337 using xda premium
Thanks, but it cannot be edited. Also, it seems only the entries in APN type differ
d9vabder said:
Go to your
settings>more networks...>mobile networks>Acess Point Names "APNs"
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I cannot edit the entries? How do you edit?
Also, it seems your only difference from mine reset to default are entries in:
yours > APN type: default,agps,supl,mms,hipri,internet *Note* no space
mine/default > APN type: default,mms,supl,hipri,fota
so yours adds agps,
flip flops the order of mms/supl (does order matter)
deletes fota
adds internet
I see on another thread a tip that suggested changing the MMS port from 80 to 8080. He said it works for a while, and when it fails, he changes it back to 80, and so on
NOTE: ( I can't find the page) this is the main page
http://forum.xda-developers.com/showthread.php?t=1791526&page=1
The thread wanders all over the place, so read with caution. This is complicated and frustrating to have to figure out.
About the only thing I saw that I would tend to think is where it all lies is that AT&T and Verizon use different LTE and they have different protocols, and they don't "play nicely together". Since my problems all seem to be between AT&T (me and m5 phones) and Verizon (15 or so other family members from whom we 5 all have issues receiving. They never have issues within Verizon)
Related
Was looking around and around for this so I figure I post it!
Android Vibrant
APN: Simple
Proxy: 216.155.165.50
Port: 8080
Username:<notset>
Password:<notset>
Server:<notset>
MMSC: h__p://smpl.mms.msg.eng.t‐mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS port: 8080
MCC: 310
MNC: 260
Authentication type: PAP
APN Type: <notset> (Mines set to Internet+MMS)
What does this do
Sent from my SGH-T959 using XDA App
will this ensure that i can send and receive picture messaging?
doesnt work. any fix??
Try this work around. Make sure that your numbers in your contacts don't have any dashes in them so say 2065551234 instead of 206-555-1234 worked for me. Works now! Try it and let me know!
Sent from my SGH-T959 using XDA App
If you are running ICS on your Vibrant on SimpleMobile, the old settings do not seem to work. So if you use the settings for the Galaxy Nexus, it works.
Name: SIMPLE Mobile
APN: simple
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc
MMC: 310
MNC: 260
Authentication type: Not set
APN Type: default,supl,mms
APN protocol: IPv4
Bearer: Unspecified
This is the only way I was able to get ICS to work with all data with SimpleMobile.
Hope it helps anyone.
using their website settings work for me. too bad they throttle the 40$ plan to 14kbs
I have found about 20 different posts that all list different APN settings for T-Mobile US. Does anyone know what they should be for sure? Please only post if you are able to SEND MMS. I seem to be able to receive MMS, but can never send MMS. I have gotten it to work a couple times on some builds but the same settings don't seem to work on other builds.
Posting the settings is great but if you have a backup file from "APN Backup and Restore" that would be even more convenient.
Thanks
I fought with this same problem for a while, trying every setting i found in all the threads. One way i finally found that allowed me to send and recieve was to make 2 APN's, one with the standard epc.tmobile.com and nothing else, and another named t-mobile mms with the following settings:
APN: T-Mobile MMS
Proxy: None
Port: None
Username :none
Password: none
Server: none
MMSC: http://mms.msg.eng.t-mobile.com/mms.wapenc
MMS Proxy: 216.155.165.050
MMS port: 8080
MCC: 310
MNC: 260
I got the idea for using multiple APN's when i looked at my girlfriend's my touch slide's settings. Hope that helps!
Thanks. I'll give that a try and let you know how it goes. I read once that there are different settings for PPP and RMNET. I wonder if that's why I was able to get it to work on some builds and not others.
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
THANKS pretzdothack AND deadmansink !!!!!!!!!!!!
as per another thread!
i use this and it works but the pictures are still fuzzy
WaveyKat said:
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
THANKS pretzdothack AND deadmansink !!!!!!!!!!!!
as per another thread!
i use this and it works but the pictures are still fuzzy
Click to expand...
Click to collapse
this particular mmsc worked for me!
ok
Thanks!!!!!!!
jay-red said:
I fought with this same problem for a while, trying every setting i found in all the threads. One way i finally found that allowed me to send and recieve was to make 2 APN's, one with the standard epc.tmobile.com and nothing else, and another named t-mobile mms with the following settings:
APN: T-Mobile MMS
Proxy: None
Port: None
Username :none
Password: none
Server: none
MMSC: http://mms.msg.eng.t-mobile.com/mms.wapenc
MMS Proxy: 216.155.165.050
MMS port: 8080
MCC: 310
MNC: 260
I got the idea for using multiple APN's when i looked at my girlfriend's my touch slide's settings. Hope that helps!
Click to expand...
Click to collapse
Thanks for these settings that u shared. This was the only APN that worked for my friend to get mms on tmobile prepaid with an AT&T Xperia Play 4g. They only get 2g/Edge, but I feel they even got an increase in speed from the "telekila"APN that was on the phone even if its small increase within 2g. Thanks everyone.
What are the correct apn settings for T-Mobile prepaid? Speedtest.net is reporting my location WAY off and pings are through the roof even though data speeds are just fine.
Hi. I am currently using a rooted Nexus 4 with a stock rom. I've been trying to configure my APN for MMS only. I currently have this set up in my APN settings which I got from here. http://forum.xda-developers.com/showthread.php?t=1882479
Name: Dummy APN
APN: dummy
MMS port: 80
MCC: 310
MNC: 410
APN type: default,supl,internet <-- exactly as typed no spaces
(remember to hit lower left menu, save)
Name: ATT MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Even with this set up Android OS is showing up in my data usage draining a lot of data. Can anyone help me out with this?
The easiest way to use mms without data plan is to call at&t and black your data, then you can enable internet and mms will work but data wont
I called before and ask them if i can do that. They said your MMS wont go through since the data is blocked.
Sorry, if this has been answered somewhere else, but for the life of me I just can't find it.
I have a Nexus 7 3G on the ATT network. My APNs looked wrong and I can't find what the default APN should be. If anyone has it, please let me know. I've been searching for a couple hours with no luck for an APN that was specifically for the Nexus 7 on ATT.
Thanks,
--Shane
i dont use at&t but after some probing, i came across this. You might wanna try one of these and experiment which one of these work. Or you can just ask AT&T? Unless of course having a custom ROM affects the APN settings like other devices.
APN 1 phone
mmsc: http://mmsc.mobile.att.net
mms proxy: proxy.mobile.att.net
MMS port: 80
MCC:310
MNC:410
APN type: default,supl,mms,hipri
APN 2 (Up to 3.5G HSDPA/HSUPA only, 7.2mbps):
Name: Cingular
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,fota,dun
APN 3 (Up to 3.75G HSPA+ only, 21mbps):
Name: AT&T HSPA+
APN: phone
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,dun
APN 4 (LTE, ALL THE mbps):
Name: AT&T LTE
APN: pta
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,hipri,internet
APN 5 Cingular MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: mms
APN 6 AT&T LTE MMS
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: hipri,mms
Nexus 7 2012 AT&T APN Settings
I know this is an old thread, but this information doesn't seem to be ANYWHERE, and I just had to flash back to stock on my nexus 7 just to get these settings (calling AT&T was useless...). There are 2 APNs on the Nexus 7 on AT&T. Neither of them are the phone APNs listed above. They are as follows:
Name: ATT Activation
APN: lwaactivate
MCC: 310
MNC: 410
APN Protocol: IPv4
Bearer: Unspecified
MVNO: None
Second:
Name: ATT Broadband
APN: broadband
MCC: 310
MNC: 410
APN Type: default
APN Protocol: IPv4
APN Roaming Protocol: IPv4
Bearer: Unspecified
MVNO type: None
These should work for anyone out there that needs 'em!
I'm running the PACMAN ROM on at&t Galaxy S4 and I can't seem to find a post where someone has the right settings to send/receive pictures. Does this not work with this rom? How can I send/receive pictures with this ROM?!
I also have LTE working. I can't send pictures. My APN settings are:
APN: pta
MMSC: proxy.mobile.att.net
MMS PORT: 310
MNC: 410
APN TYPE: default,supl, mms
APN protocol: IPv4
APN Roaming protocolL IPv4
I've also tried these settings:
Name ATT
APN wap.cingular
Proxy blank
Username blank
Password blank
Server leave it blank
MMSC http://mmsc.cingular.com
MMS Proxy wirless.cingular.com
MMS Port 80
MCC 310
MNC 012
Authentication type not set
APN Type internet + mms
APN... wap.tracfone
port.. 80
MMSC. http://mmsc.cingular.com
MMS... Proxy mms2.tracfone.com
MMS port.. 80
MCC.. 310
MNC.. 410
APN type.. defualt,supl,mms
I have an at&t GS4.
this is what I have
Name: ATT Phone
APN: phone
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: default,mms,supl,hipri
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
I called art and they fixed it! Cool
Sent from my SGH-I337 using xda app-developers app