Related
Hi all, Was trying yo install a new firmware on my friends i9502 in order to put on a Rom with Gapps. Anyways. long story short. It has never been connected to Kies. And now I cannot do anything with it except put it into Download mode... I may have accidently tried to pop on a recovery before updtaing firmware and rooting. Firmware gets through ODIN then FAils... ANy help? I am downloading another firmware, but any firmware that has a quick download would be appreciated at this stage - and would be really helpful as I just need to get it going at this stage and the firmwares I have found are mega slow downloads.
Anyone?
s327374 said:
Hi all, Was trying yo install a new firmware on my friends i9502 in order to put on a Rom with Gapps. Anyways. long story short. It has never been connected to Kies. And now I cannot do anything with it except put it into Download mode... I may have accidently tried to pop on a recovery before updtaing firmware and rooting. Firmware gets through ODIN then FAils... ANy help? I am downloading another firmware, but any firmware that has a quick download would be appreciated at this stage - and would be really helpful as I just need to get it going at this stage and the firmwares I have found are mega slow downloads.
Anyone?
Click to expand...
Click to collapse
Gets past <L File analysis, setupconnection, initialization, get PIT for mapping, Firmware update start, shoot.bin, NAND write Start, param.bin, boot.img, recovery.img, system.img ... then FAIL!
ANyone ?
s327374 said:
Gets past <L File analysis, setupconnection, initialization, get PIT for mapping, Firmware update start, shoot.bin, NAND write Start, param.bin, boot.img, recovery.img, system.img ... then FAIL!
ANyone ?
Click to expand...
Click to collapse
Looks like I helped myself ... There was something wrong with my initial download of the Firmware. Replacement file which took a long time to download, worked a treat. No problems, all solved.
Always test .zip file before flash
Hello guys,
First of all, sorry for my bad english, I'm brazilian and I will not use any kind of translation tool.
I had installed on my phone Cyanogen but I downloaded the leaked KitKat 4.4.2 for GT-I9505 and for some reason some trouble occoured during the procedure on Odin. Now my phone starts with: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I've downloaded many many rooms trying to flashing but none of them worked.
So searching here and there I found that I should be looking for "STOCK ROMs", but I downloaded few of them and no results at all...Then I noticed that I should be using some files in the MODEM, CSC or CP, CSC (depending on the version of Odin I'm using), but none of those files I've downloaded had those.
The list of ROMs I have:
"I9505XXUFNB8_I9505OXAFNB8_I9505XXUFNB8_HOME.tar.md5"
"I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF_HOME.tar.md5"
"I9505VJUEMKE_I9505ZTOEMKE_I9505VJUEMKE_HOME.tar.md5"
"I9505XXUDMH8-PRE-ROOTED-KNOX_FREE-ODEX-FULL.tar.md5"
"I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar.md5"
"I9505VJUBMG3_I9505ZTOBMG3_I9505VJUBMG3_HOME.tar.md5"
I cannot flash any of those through Odin v3.07 or v3.09.
Looking here and there on the internet I found that I should be trying to split the HOME files into 3 files PDA,CSC and MODEM.
I've downladed Cygwin with "tar" "zip" and "md5" packages and SplitFUS2.
But here is an exemple of what happends when I try to split any of those above:
$ ./splitfus2 -s -w I9505VJUBMG3_I9505ZTOBMG3_I9505VJUBMG3_HOME.tar.md 5
SplitFUS2 by Doky v2.11.120625GA
Checking prerequisites...
...tar, md5sum, zip found, ready to go![*]Including sbl.bin - USE WITH CAUTION!!![*]Creating WIPE package
Processing file: I9505VJUBMG3_I9505ZTOBMG3_I9505VJUBMG3_HOME.tar.md 5
MODEL: I9505VJ
PDA: UBMG3
CSC: TOBMG3
MODEM: UBMG3
Temporary workfolder: I9505VJ_UBMG3_TOBMG3\
Invalid file format
Click to expand...
Click to collapse
Can someone give me detailed information how can I proceed with this?
Thank you very much.
Dugga said:
Hello guys,
First of all, sorry for my bad english, I'm brazilian and I will not use any kind of translation tool.
I had installed on my phone Cyanogen but I downloaded the leaked KitKat 4.4.2 for GT-I9505 and for some reason some trouble occoured during the procedure on Odin. Now my phone starts with: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I've downloaded many many rooms trying to flashing but none of them worked.
So searching here and there I found that I should be looking for "STOCK ROMs", but I downloaded few of them and no results at all...Then I noticed that I should be using some files in the MODEM, CSC or CP, CSC (depending on the version of Odin I'm using), but none of those files I've downloaded had those.
The list of ROMs I have:
"I9505XXUFNB8_I9505OXAFNB8_I9505XXUFNB8_HOME.tar.md5"
"I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF_HOME.tar.md5"
"I9505VJUEMKE_I9505ZTOEMKE_I9505VJUEMKE_HOME.tar.md5"
"I9505XXUDMH8-PRE-ROOTED-KNOX_FREE-ODEX-FULL.tar.md5"
"I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar.md5"
"I9505VJUBMG3_I9505ZTOBMG3_I9505VJUBMG3_HOME.tar.md5"
I cannot flash any of those through Odin v3.07 or v3.09.
Looking here and there on the internet I found that I should be trying to split the HOME files into 3 files PDA,CSC and MODEM.
I've downladed Cygwin with "tar" "zip" and "md5" packages and SplitFUS2.
But here is an exemple of what happends when I try to split any of those above:
Can someone give me detailed information how can I proceed with this?
Thank you very much.
Click to expand...
Click to collapse
Already Tried the official kitkat I9505?
I never like it, just flash the official all back
Yes, I tried
Androiders96 said:
Already Tried the official kitkat I9505?
I never like it, just flash the official all back
Click to expand...
Click to collapse
I've tried so many ROMs, most of them is official, including the Snapdragon "I9505VJUBMG3_I9505ZTOBMG3_I9505VJUBMG3_HOME.tar"
And I'm downloading now Galaxy S 4 (Snapdragon) GT-I9505 ZTM I9505VJUEMKE from samsung-updates.com/device/?id=GT-I9505 to see if it will work.
ZTM is my country and mobile service provider, let's see if I can flash that one or if it will show the same error as the others above.
Dugga said:
I've tried so many ROMs, most of them is official, including the Snapdragon "I9505VJUBMG3_I9505ZTOBMG3_I9505VJUBMG3_HOME.tar"
And I'm downloading now Galaxy S 4 (Snapdragon) GT-I9505 ZTM I9505VJUEMKE from samsung-updates.com/device/?id=GT-I9505 to see if it will work.
ZTM is my country and mobile service provider, let's see if I can flash that one or if it will show the same error as the others above.
Click to expand...
Click to collapse
1. Stop of flash things without know what the **** u are doing.
2. You flashed I9505XXUFNB8 first with new bootloader android 4.4.2 and you cant downgrade ur phone now to android 4.3.
3. You only can download and flash I9505XXUFNB8 again and is all.
As I imagined
Joku1981 said:
1. Stop of flash things without know what the **** u are doing.
2. You flashed I9505XXUFNB8 first with new bootloader android 4.4.2 and you cant downgrade ur phone now to android 4.3.
3. You only can download and flash again and is all.
Click to expand...
Click to collapse
OMFG, that you very much and sorry for my noobish attempts to downgrade =X, I just realized that know.
A BIG KISS IN YOUR MOUTH!!
SOLVED!
Splitfus can't work with that, only work with low-end phones firmware files
look the phones that support, and for me always splitfus worked with these models
Supported models (please report if not listed!)
-S5360
-S5360B
-S5360L
-S5360T
-S5363
-S5369
-B5510
-S6102
-S5570I
-S5830i
tested and NOT supported (yet, sorry):
-S5690
u can try this thread, and post #6
http://forum.xda-developers.com/showthread.php?t=2349948
Hello,
I have a note 4 SM-N910F and I'm from Belgium.
I have upgraded succesfully my note to 5.01 with a Netherlands firmware N910FXXU1BOC3_N910FTPD1BOC1_TPD. However in this firmware the APN for ZiGGO was hardcoded and I couldn't remove it.
In the mean time a new 5.01 for Belgium has become available N910FXXU1BOC5_N910FPRO1BOC1_PRO. But when I try to flash my note with Odin 3.09 I always end up with an error being hidden.img to big and an EXT4 size fail error. Then I need to flash back to the previous firmware to make it work again.
I redownloaded the firmware to make sure (MD5 was correct) and tried to erase the Note before flashing but with the same flashing error.
Any suggestions ?
Thank you
Bump
toxictoy said:
Hello,
I have a note 4 SM-N910F and I'm from Belgium.
I have upgraded succesfully my note to 5.01 with a Netherlands firmware N910FXXU1BOC3_N910FTPD1BOC1_TPD. However in this firmware the APN for ZiGGO was hardcoded and I couldn't remove it.
In the mean time a new 5.01 for Belgium has become available N910FXXU1BOC5_N910FPRO1BOC1_PRO. But when I try to flash my note with Odin 3.09 I always end up with an error being hidden.img to big and an EXT4 size fail error. Then I need to flash back to the previous firmware to make it work again.
I redownloaded the firmware to make sure (MD5 was correct) and tried to erase the Note before flashing but with the same flashing error.
Any suggestions ?
Thank you
Click to expand...
Click to collapse
toxictoy said:
Hello,
I have a note 4 SM-N910F and I'm from Belgium.
I have upgraded succesfully my note to 5.01 with a Netherlands firmware N910FXXU1BOC3_N910FTPD1BOC1_TPD. However in this firmware the APN for ZiGGO was hardcoded and I couldn't remove it.
In the mean time a new 5.01 for Belgium has become available N910FXXU1BOC5_N910FPRO1BOC1_PRO. But when I try to flash my note with Odin 3.09 I always end up with an error being hidden.img to big and an EXT4 size fail error. Then I need to flash back to the previous firmware to make it work again.
I redownloaded the firmware to make sure (MD5 was correct) and tried to erase the Note before flashing but with the same flashing error.
Any suggestions ?
Thank you
Click to expand...
Click to collapse
Make sure you are using the latest ODIN version, which is 3.10.6 and run ODIN as administrator.
I'm using latest Odin in administrator mode but with same result (hidden file failed size too big ext4 error). I see in the forum lot's of people face the same problem and they solve it by integrating it with a new PIT file in Odin. However I can't find the correct PIT file for this one..
Cheers
toxictoy said:
I'm using latest Odin in administrator mode but with same result (hidden file failed size too big ext4 error). I see in the forum lot's of people face the same problem and they solve it by integrating it with a new PIT file in Odin. However I can't find the correct PIT file for this one..
Cheers
Click to expand...
Click to collapse
Flash stock rom and when finish then flash custom recovery twrp and phone booted normally.
@toxictoy
Did you find how solve your problem?
Because I have the same problem like you. The only different that my note4 have region code BTU.
I was able to find online a PIT file for the note 4. I used this to flash the new rom and this worked perfectly.
Could you give me a link to this PIT file ?
Hi,
Need help in fixing my Note 3...Please
I have Galaxy Note 3 N9005 with android 4.4.2. having ROM model N9005ZHUENH4_N9005ZZHENH4_TGY
I downloaded Android V 5.0 ROM from Sammobile with country TGY same as that of already working ROM.
I started the mobile in download mode and burned the ROM but it failed at cache.img with invalid Ext4 error
I downloaded many other ROMs for N9005 from sammobile and only few loaded successfully. However all the ROMs flashed successfully result in inactive wifi.
So I am now running mobile with no wifi.
Please help...
What do you mean rom burning ?? Heating or flashing ??
What is your phones original firmware ??
i'm also facing this problem when i flash Samsung Official Firmwares (kitkat & lollypop) on my Note 3 SM-N9005.. after flashing Wifi button becomes irresponsive so that i cant switch on my wifi..
But When i do flash any custom ROM ( like blisspop, Dark Lord , Phorensesis etc) , this wifi problem is not occured..
if u got any solution , plz post it.. thanks in advance
JJEgan said:
What do you mean rom burning ?? Heating or flashing ??
What is your phones original firmware ??
Click to expand...
Click to collapse
By burning I meant flashing new ROM
Original firmware is N9005ZHUENH4_N9005ZZHENH4_TGY and mobile is not rooted.
Now re-flashing the stock ROM downloaded from sammobile fails at cache.img with invalid Ext4 error
However the following ROMS loads successfully but Wifi greyed and not enabling/working
N9005XXUGBOD6_N9005AMOGBOD2_AMO
N9005XXUGBOF1_N9005BTUGBOD2_N9005XXUGBOD3_HOME.tar.md5
N9005XXUGBOG4_N9005OJVGBOG2_N9005XXUGBOD3_HOME.tar.md5
N9005XXUGBOJ6_N9005XEOGBOJ1_XEO
N9005XXUGNG1_N9005AMOGNH1_N9005XXUGNG1_HOME.tar.md5
N9005XXUGNG1_N9005XEOEND2_alexndr.tar.md5
N9005XXUGBOD6_N9005AMOGBOD2_N9005XXUGBOD1_HOME.tar.md5
N9005XXUGBOJ6_N9005XEOGBOJ1_N9005XXUGBOJ1_HOME.tar.md5
same issue
i also faced the same issue and can't fix it till now
but some said that there is a driver file could be uploaded through odin will fix it as it's a driver sw issue not hardware
so do anyone know from where can we find this file plz?
HELP
Hi XYAN78, I had the same isse as you, I also upgraded from kitkat 4.4.2 to the latest TGY rom through Odin, I finally fixed it. Here are the things you can try :
1. Try wipe cache, data from recovery then shut down and take out the battery, then startup the phone again. You may try a few times.
2. If 1. not work, try do :
-wipe data/cache in recovery.
-flash rom througn Odin( don't tick the auto restart check Box), when odin flash finish, reboot into recovery and wipe data&cache. Shut down and take out the battery.
-boot into download mode directly, and flash the rom again.
(You may ned try more time this cycle in order to to fix it. Good luck)
leohk said:
Hi XYAN78, I had the same isse as you, I also upgraded from kitkat 4.4.2 to the latest TGY rom through Odin, I finally fixed it. Here are the things you can try :
1. Try wipe cache, data from recovery then shut down and take out the battery, then startup the phone again. You may try a few times.
2. If 1. not work, try do :
-wipe data/cache in recovery.
-flash rom througn Odin( don't tick the auto restart check Box), when odin flash finish, reboot into recovery and wipe data&cache. Shut down and take out the battery.
-boot into download mode directly, and flash the rom again.
(You may ned try more time this cycle in order to to fix it. Good luck)
Click to expand...
Click to collapse
Hi leohk,
i tried your steps but not working...
actually i cannot reload my actual ROM TGY 4.4.2. Few working ROMs as given in my last post are loading successfully.
Can you tell what TGY ROM you have successfully flashed and from where you downloaded that . as i have tried almost all tgy roms from sammobile... I have noticed a zip file error in the TGY ROMs downloaded from sammobile
XYAN78 said:
Hi leohk,
i tried your steps but not working...
actually i cannot reload my actual ROM TGY 4.4.2. Few working ROMs as given in my last post are loading successfully.
Can you tell what TGY ROM you have successfully flashed and from where you downloaded that . as i have tried almost all tgy roms from sammobile... I have noticed a zip file error in the TGY ROMs downloaded from sammobile
Click to expand...
Click to collapse
Originally I was on Kitkat: N9005ZHUENJ1 and then flash the Lollipop N9005ZSUGOI1, I use Winrar and when try the zip file test also failed but after installed the latest version of Winrar, it passed the test. btw, when Odin do the flash it will test the MD5 check also, so if it can pass the MD5 test step in Odin flash process then the file should be fine.
below is the Lollipop Rom I flashed, and I followed the instruction there also.
http://www.sammobile.com/firmwares/download/57235/N9005ZSUGOI1_N9005OZSGOI1_TGY/
I remember I tried the process around 4-5 time before I can get the wifi issue fixed. I have a 16G HK version Note 3.
Hi leohk,
I tried the method but it is not working. The TGY ROMS gives ext4 error at cache.img. other ROMS as in my above post loads but without Wifi. So, still without Wifi...
my mobile is 32GB HK version maybe that is the reason.
I also noticed mobile heating up after flash/factory reset is it normal??
Thanks for sharing your experience.
Hi All,
After wandering over the internet to solve my problem i finally resolved it.
I changed my approach to problem instead of focusing on wifi to work with ROMS loading successfully; i focused on ext4 error while flashing with original TGY stock ROM.
After googling and going through many forums I found the solution that worked
The solution was to flash the stock TGY ROM with pit file "CSB_signed_HLTE_EUR_OPEN_32G_0805" and voila...
This pit file is available on the internet.
Initially I loaded original TGY stock ROM 4.4.2 which worked and Wifi not greyed this time.
Afterward I loaded TGY ROM 5.0. The second time without pit file and it was fine.
After re-partition with CSB_Signed_HLTE_EUR_OPEN_32G_0805, what are size of the partition of System, Cache and Hidden of your Note3?
My 32G N9005 is with same wifi problem after flashing latest TGY LL stock ROM. I found System partition size is of 2.2GB but the size of System partition derived from PIT file should be 2.9GB.
Dear All,
An update all are waiting for....
Samsung Galaxy C9 Pro Android 7.1.1 Nougat update starts rolling out in India.
Check this link..
http://www.fonearena.com/blog/23443...ougat-update-starts-rolling-out-in-india.html
But i have Rooted my C9 Pro Hk ? how would i get Nougat Update ? ?
Just download the firmware from Sammobile & flash it through Odin.
That should update it.
=======================
Instructions
Extract (unzip) the firmware file
Download Odin v3.12.7
Extract Odin ZIP file
Open Odin v3.12.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes..
=========
I m not Responsible if you brick your phone.
Please do it at your own Risk.
All the Best..
that is not a good news .. while orio arrived at many phones now we get nougat .. ?
by the way it is known that mid range phones from samsung get only 2 major updates .. and now we lost one chance to go further
they could go straight to Orio and skip nougat .. thay is frustraiting .
Pariki said:
Just download the firmware from Sammobile & flash it through Odin.
That should update it.
=======================
Instructions
Extract (unzip) the firmware file
Download Odin v3.12.7
Extract Odin ZIP file
Open Odin v3.12.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes..
=========
I m not Responsible if you brick your phone.
Please do it at your own Risk.
All the Best..
Click to expand...
Click to collapse
@Pariki i have downloaded the firmware and extracted the zip file for the odin but there is a confusion in my mind after extracted the firmware because there is a 2 CSC Files in a firmware one is CSC_ZZH_C9000 and second is HOME_CSC_ZZH_C9000 which CSC file should i have to upload in Odin CSC button ? ? ?
Maria D'cruzz said:
@Pariki i have downloaded the firmware and extracted the zip file for the odin but there is a confusion in my mind after extracted the firmware because there is a 2 CSC Files in a firmware one is CSC_ZZH_C9000 and second is HOME_CSC_ZZH_C9000 which CSC file should i have to upload in Odin CSC button ?
Click to expand...
Click to collapse
==================
You should select Home_CSC for new versions of Odin.
Check the screenshot or Google for difference between Odin versions.
I got upgraded my C9 Pro with Android 7.1.1. And now I found a weird problem that, only Media sound is not coming in headphones. I could hear ringtones, messages tone in headphones. But only music, YouTube audios.. Can't be heard in headphones. But all sounds are heard in mobile speaker. Do anyone else face the same problem and appreciate solution ideas.
The OTA update has been rolled out for C9 PRO (SM-C9000) users. Just a few minor updates I think. Not a big update. ?
Pariki said:
Just download the firmware from Sammobile & flash it through Odin.
That should update it.
=========
I m not Responsible if you brick your phone.
Please do it at your own Risk.
All the Best..
Click to expand...
Click to collapse
Hello, Is the India Firmware compatible with C9000? I wish to run the Nougat Firmware on this variant.
Paul_Days said:
Hello, Is the India Firmware compatible with C9000? I wish to run the Nougat Firmware on this variant.
Click to expand...
Click to collapse
=====================
Plz try this.
https://forum.xda-developers.com/c9-pro/development/rom-prism-barebone-v1-t3702912
I can see that it works on C9000 also. The screenshots clearly say that the Rom is compatible with yours.
Try at your own risk.