Related
Hi all. I looked at several wi-fi posts on here, but couldn't find anything related to my problem.
I'm beginning to suspect that it's because of something stupid I'm doing, cos it really should be working...
Anyhoo ...I have a wireless router at home, and it's serving 3 PCs with DHCP IP addresses, and an internet connection. I have no issues with it.
What I'm trying to do now is get my shiny new XDAIIi to connect, so that I can have the damn thing on the internet. So far, no luck.
Now, I have got the XDA to detect my SSID. It detects all the settings, and tells me it's connected. I even have a signal strength bar on it which reads about 50%.
However, when I set it to pick up a DHCP address it stubbornly refuses, remaining with a "I can't see a DHCP server" 169.x.x.x address.
I've tried reserving an address on the router and allocating it to the MAC address of the XDA, and manually setting the XDA to have that IP address, entering my router as the gateway, and even entering 2 valid DNS server IPs from my ISP into the name server entries. Still nothing. It says it's connected with the IP address I allocated, but I have no net connection, and I can't ping that address from any of my PCs.
All the while the status screen on the router tells me that the device, with it's MAC address, is connected to the router fine.
Surely this has to be something simple. I have set up all the clients and router for my network, and the settings on the XDA are pertty much the same, and really SHOULD be working.
I'm kinda at my wits end.
So basically any suggestions or advice, or anyone with similar experiences please get in touch, cos I'm struggling to see what I've done wrong, and it's giving me an ulcer.
Many thanks in advance.
Jess
3COM WAP (3CRWE454G72) - XDA IIi WIFI Problems
Hi Jess,
I very much share your frustration.
I have a 3COM WAP (3CRWE454G72) which has served me well. I have a few machines at home working from it. At work we have 20+ machines working from the same model (older firmware).
My specs are as follow:
3C number 3CRWE454G72
Software version 1.03.07A
Boot loader version 1.00.00
Wireless version V1.0.2.1
Hardware version R01A
Don't have the office one's specs here at the moment ...
At work I can get an IP address (there's a windows DHCP server) .. AND I can ping google and traceroute to google. BUT, XDA IIi doesn't seem "know" that it's connected (e.g. network settings shows the WAP as available, but not connected). SKYPE even works!! But nothing else, no IE, no Terminal Services Client, no Avant Go, no network ActiveSync. They all say that the is no network card configured (but with vxUTIL, vxIPCONFIG, etc). I can see ALL the IP details from the DHCP server.
At home it's worse. I can't even get it to connect to the WAP (either with WEP 128, WEP 64 or encryption turned off). As I'm not even getting an IP address at home from the WAP's DHCP server, I've built a new DHCP server on my one linux box and it works for all my machines ... now I can actually trace requests from devices for IP's ... and the XDA IIi never requests an IP address. Which tells me that it's not even getting through the first stages of connecting with the WAP (again tried WEP, NO WEP).
To make things worse. I have been able to connect to some open WAP's in the neighbourhood ... everything functioning normal.
I'm losing the will to live here also ... ;-)
Wolfie
the plot thickens...
Hi Wolfie.
Well, at this end I seem to have more news.
By removing all WEP encryption and removing the MAC address access restriction I had enabled, I got the XDAIIi online, and all was working.
I then enabled the security a step at a time, and at each step updated the configuration on the handheld, and it still all worked. I was so pleased.
)
However this morning I have come to put the thing online again, and once again it refuses to pick up a DHCP address.
I tried my process again, and this time it wont work.
It definitely seems that it's the encryption that's stopping it, but I can't get it working this morning.
When I disabled everything I managed to get it online, but then re-enabling the security killed it and I can't get it to come online again.
SIGH
Oh well, I will try again later. Fussy thing. Anyone ever manage to solve this ??
Jess
have u tried soft reseting the device and retrying, sometimes that cures these hiccups
rgds
jim
WIFI WOES
Jess, thanks for the reply. There's hope. ;-)
I have tried your approach yesterday. However, to no avail. At home I completely opened my WAP, e.g. any MAC, no WEP/WPA, etc. But still nothing. When I look at my log files on the WAP. I can see plenty of entries coming from my XDA IIi ...
04 min(s) 41 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 43 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 45 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 46 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 48 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 50 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
... and it just goes on and on and on .... while trying to connect.
At the same time in all connections attemps, I don't get a single entry in my DHCP servers log saying that my XDA II attempted to connect.
Jim: I've tried hard resets, soft resets, O2 Active installed, Corporate mode, pretty much everything my single brain-cell can come up with. ;-)
The thing is definitely a little fiddly indeed ...
The search goes on ...
... anybody out there got their XDA IIi working with WIFI using DHCP and WEP or WPA?
Did you ever get this working?
I have a shiny new XDAIIi and have been trying to get connected via my Cisco Aironet 1200 WAP. The device happily detects my network, accepts the WEP key fine (complains if I enter the wrong key so I know it's communicating) but refuses to pick up an IP address. The Wireless LAN Manager just sits there "Scanning network..."
I firmly belive I'm just missing something but...........
Any help gratefully received :?
bump
I got my QTek 2020i today and for the life of me I can't get it to connect to the internet using my wifi connection @ home
I also have a 3COM router 3CRWE754G72-A and I have my home pc connected to this and also occassionally my work PC - both with no probs.
I can get the qtek to connect and I get a 50% signal strength and I can view an IP address and everything looks good but I can't seem to setup a "Connection" as required by IE?
This is what I get:
"Cannot connect with current connection settings. To change your connection settings, tap Settins"
I tap settings and I get this:
My ISP
Add a new modem connection
My ISP
Add a new modem connection
Add a new VPN server connection
Set up my proxy server
I've gone into each of these and had a "play" but I still can't get the bloody thing to work :evil:
Can someone PLEASE help as this is starting to drive me mad! - I'm not giving up easily...I've been trying to get this to work for a good 4 hours now and I can't find anything in the manual or on the web that helps...this post was the closest I could fine >>> hence the bump!
Cheers
Wayne
have you try to configure the network cards in the connection setting and set the internet using the tiacxwln Compatible Wireless Ethernet?
guoper said:
have you try to configure the network cards in the connection setting and set the internet using the tiacxwln Compatible Wireless Ethernet?
Click to expand...
Click to collapse
Okay, I can get the connection to read "connected" via the Wireless Lan Manager and I can get an IP address - which is totally different to all the other PC's that use my wifi connection - they're all 192.168.1.x whereas this is very different? - the address that I get isn't even the same as the IP Address of my router - I have a static IP address so I know this isn't changing???
Also, when I view the network card page I see the following:
Configure Wireless Networks
Add New...
3Com Available
I can click on this and view the settings for it or I can hold-click and get the option of connecting. If I do this, it just says "connecting"; it never actually says "connected"?
Anyone know where I can get a walkthrough for this?
Cheers
Wayne
3 Com Routers
Hi, DotN
I put a 3Com router in my local pub.
I have no problem connecting to it and solving the usual pub talk problems with it.
If you are getting a connection but your IP address starts with 169.254 then I would say you have a WEP problem. The software only appears to check for incorrectly formatted WEP keys, so either turn it off or make sure you enter the correct key. When selecting connect to a router the message sticks on connecting, come out of the screen and go back in after about 30 secs. Check you ip address. I have had some issues with GRPS trying to connect, but they seem to go away after a couple of hides.
I have to say that I am not over the moon with my XDA2i, but the wifi part has worked pretty well for me.
Laters
Paddy
Re: 3 Com Routers
MacPad said:
Hi, DotN
I put a 3Com router in my local pub.
I have no problem connecting to it and solving the usual pub talk problems with it.
If you are getting a connection but your IP address starts with 169.254 then I would say you have a WEP problem. The software only appears to check for incorrectly formatted WEP keys, so either turn it off or make sure you enter the correct key. When selecting connect to a router the message sticks on connecting, come out of the screen and go back in after about 30 secs. Check you ip address. I have had some issues with GRPS trying to connect, but they seem to go away after a couple of hides.
I have to say that I am not over the moon with my XDA2i, but the wifi part has worked pretty well for me.
Laters
Paddy
Click to expand...
Click to collapse
Hi Paddy
Thanks for the info. You're bang on with the IP Address!...169.254.x.x
So what encryption can I use?
I've deffinately got the correct password but it's obviously not working
Cheers
Wayne
Hi again
Okay, I've just checked the encryption and I'm using WPA-PSK authentication with TKIP encryption.
Is this what you had?
Cheers
Wayne
3 Com Routers
Are you using a password or 13 Hex pairs, I use the pairs. Try either turning wep of completely or entering 26 1s. Remove your setting for your ap in Configure Wireless Networks screen then reconnect.
Let me know what happens
Paddy
Re: 3 Com Routers
MacPad said:
Are you using a password or 13 Hex pairs, I use the pairs. Try either turning wep of completely or entering 26 1s. Remove your setting for your ap in Configure Wireless Networks screen then reconnect.
Let me know what happens
Paddy
Click to expand...
Click to collapse
Okay, I've basically removed all security from my wifi setup. I live in the middle of nowhere so it's not a problem - although once I get the wifi working I'll try and get the security going again.
I still can't get a connection
...stop the press!
Okay, I had a thought...maybe I can't connect because of the speed?
the router is a 11g but supports 11b (which is what the QTek 2020i/XDA IIuses) - sure enough, I had the 11g only option selected - DOH!
removed that and I've managed to connect without security.
I assume this was my problem all along...will now stick the security back on and try again
Thanks again Paddy
Cheers
Wayne
Update: I've now managed to get the wifi working with WPA-SPK authentication using TKIP encryption
all along it was simply a case of me having the speed on the router set above what the PDA was capable of! I'd set this ages ago when I first setup my wlan and had forgotten about it cause everything I use is 11g
Cheers again
Wayne
DotN said:
Update: I've now managed to get the wifi working with WPA-SPK authentication using TKIP encryption
all along it was simply a case of me having the speed on the router set above what the PDA was capable of! I'd set this ages ago when I first setup my wlan and had forgotten about it cause everything I use is 11g
Cheers again
Wayne
Click to expand...
Click to collapse
Doh!...nope, not working again...back to the 169.254.x.x problem.
It's obviously to do with the encryption this time. I'll try some other variations - at least I know that it can work :roll:
Cheers
Wayne
Ouch......
No hard feeling, glad you found the problem
Paddy
bump!
pretty much same prob!
i can get an ip, have to check what it is, it tells me its connected on the scanning network page but on the other bit it tells me its available or connecting but never connects!
i've turned wep off and still no joy!
its really starting to drive me mad!
please please someone help
Take a read back through the last lot of posts between myself and MacPad - I think you'll find the answer there.
For me, I had to totally disable my security and everything else - I could then connect. Once I'd done that, I managed to use WEP with a 26 digit key - start by using something like "0" 26 times...make sure u count as u type them zero's in though as if u get it wrong it won't work!
apart from that, not sure what to say. If you're getting the 164.x.x.x ip address though then as MacPad said, it's to do with the security.
I would mention that the XDAIIi/Qtek 2020ii use 11mbps wifi (b) and not 54mbps (g) so make sure u've got ya router configured to allow both types of connection...this eventually turned out to be my main problem - doh!
Cheers
Wayne
ok now im home ive re-read and done the things mentioned. with a completely unsecure connection i can get a connecation, but the moment i use any kind of encryption (im using wep 64bit, but tried 128bit as well) no matter what key i use i get a split second of connection then its gone!
firewall is not on either.
any ideas??
thank for the suggestions guys im finally progressing
Hi!
I do have problem to connect the device (o2 xda mini S) to WLAN. It recognizes the network, asks for the WPA-PSK key and then attempts to connect - but fails.
If I configure the device with a static IP this IP shows up during the
connection process after a while but the device isn't connected anyway.
If I use DHCP I get no IP ever.
I also tried a very simple 8 alphanum character key.
What may be wrong here?
I hope you get an answer soon, because I have the same problem. Enter the key, then no connect. I also tried it with security turned off on the router, no connect. This thing connected every time before 2.26 ROM update.
bump - having the same issue
bump
Hope there's a reply; having the same issue but I think it's router specific too. I am on Dlink DI-614+ and a friend of mine who has DI-524 (i think) has no problem connecting reconnecting.
if you figure out a way to get it to work, please PM me... I have not figured out this problem yet.
I might try to disable all of my router settings (WEP).. but that would only mess my already configured other devices up.
Stupid question, but is it a B/G router or is it configured to only do one of them ?
Well, I got it to work by disabling encryption and leaving the AP all open...
So, apparently the software has some WPA-PSK-related bugs
Same thing with 2.24a Mr.Clean. Open AP works fine, and any encryption messes the whole thing up. The connection is done, it even gets the IP - and continues to blink arrows and no data comes through.
Windows Mobile only knows TKIP but as I was using AES and wanted to continue using AES on the other machines I configured the router to provide "TKIP and AES". Well, this didn't work but TKIP only actually works now.
I've been having the same problems, could connect to unsecured networks, no problems. The thing would just refuse to connect to my home WLAN (Belkin 54G set to B/G), secured with WPA-PSK and TKIP data encryption. However, just updated the router's firmware from the Belkin website, and BINGO!!!! It found the router, I entered the key and immediately connected, fast too. Just try updating the firmware of your router!
I agree on the router upgrades. And some routers are just crap, sorry to say. I've had bad luck with Belkins and Netgears. Linksys and D-Link typically give me much less problems. You also need to make sure that you installed the registry settings to enable G networks on you device (of course)
I have a Sonicwall using WPA-PSK with no problems.
I personally like molski's tweaks to make the necessary registry settings on my device ... http://forum.xda-developers.com/viewtopic.php?t=58438
Hope I was of some help.
My HTC Desire HD Wifi has ALWAYS been working at my home wifi network.
Over the last few weeks, it has stopped working for no apparent reason. My pc as well as 3 other laptops work perfectly fine...
When I try to connect to my own wifi network at home now, it REFUSES to obtain an ip address and simply keeps disconnecting...
It however works fine elsewhere....
Anyway I can fix this problem or a simple way to manually connect to my home wifi network?
Thanks in advance...
hi
Have you checked that your security settings are the same on the router? also try and reset the router i.e. unplug for 2 mins blah blah. I know the lappys are working fine but this is what I would do.
I use to have issues like this with my HTC Hero, how i resolved it was by adding the phones MAC Code to the router software. Found in ( Security>Mac Filter ) depends on router! but is something like that. The down side is thou, you will have to add the mac codes from all your other devices to the router also, so everything connects to your ISP. It has the benifts of a more secure network.
Hmm, thanks for the possible answers so far.
It is strange. I just went to a friends house who also has wifi, I connected as normal.
It immediately connected with full reception. It seems that EVERYTHING connects and works as normal accept for my own home wifi...
I have tried resetting it, turning it on/off, it still does not want to obtain an ip address...
what is your make is your router?
AudioFiend said:
what is your make is your router?
Click to expand...
Click to collapse
It's Siemens Gigaset SE568
I would advise you against using MAC security on your router. Instead try to "forget" your home network (Settings->Wireless&networks->WiFi settings, then hold your home network and "Forget network") and then re-add your network. If this doesn't work try assigning static IP address (Settings->Wireless&networks->WiFi settings then tap "Menu" and "Advanced" but this will make connecting to hotspots more difficult (you'll have to uncheck the static address every time you need to connect).
tkolev said:
I would advise you against using MAC security on your router. Instead try to "forget" your home network (Settings->Wireless&networks->WiFi settings, then hold your home network and "Forget network") and then re-add your network. If this doesn't work try assigning static IP address (Settings->Wireless&networks->WiFi settings then tap "Menu" and "Advanced" but this will make connecting to hotspots more difficult (you'll have to uncheck the static address every time you need to connect).
Click to expand...
Click to collapse
Thanks for the response. I tried the forget wifi network and readd it, still a no go...
Strange how my phone works ANYWHERE & EVERYWHERE accept for my own home network...
It's not important/urgent so I'm not too bothered. I just think it's strange why it refuses to obtain an ip address...
kanej2006 said:
Thanks for the response. I tried the forget wifi network and readd it, still a no go...
Strange how my phone works ANYWHERE & EVERYWHERE accept for my own home network...
It's not important/urgent so I'm not too bothered. I just think it's strange why it refuses to obtain an ip address...
Click to expand...
Click to collapse
Did you try to asign a static IP address (don't forget to test if you are connected to the internet after/if this seems to work)? Then you'll know if the problem is with the DHCP service or something else.
Ok. Sorry, I miss understood your problem! First is the router assigning ip address via dhcp as you don't state?. So the static ip method, You can try, Im here to help not say what to do and not to try..But as your pc and laptops are working I don't think the problem with dhcp.
A very quick test is to set your router to a open network and try to connect. Does this now work when you try to connect? We will work backwards to solve your problem. Also are you using a wizard cd software from the router? Or connecting to the router software via the internet explorer?
e.g 192.168.0.1 ? etc.
Sent from my Desire HD using XDA App
AudioFiend said:
Ok. Sorry, I miss understood your problem! First is the router assigning ip address via dhcp as you don't state?. So the static ip method, You can try, Im here to help not say what to do and not to try..But as your pc and laptops are working I don't think the problem with dhcp.
A very quick test is to set your router to a open network and try to connect. Does this now work when you try to connect? We will work backwards to solve your problem. Also are you using a wizard cd software from the router? Or connecting to the router software via the internet explorer?
e.g 192.168.0.1 ? etc.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Just tried the static ip address, still refuses to obtain an ip address...
As for the router, it's automatic, we simply turn on wi-fi on the computer/laptop, click the wifi network, put password and simply connect as normal....
Strangely my HTC Desire HD refuses to obtain an ip.
A few days ago I went to my brothers friends house for the first time, turned on wi-fi on my phone, went onto his network, put the password and it immediately connected without any problem...
I'm 100% sure the problem lies with my old piece of **** router, well it's not mine but my fathers and I cannot exactly tell him to throw it out the window it's complete ****...
What can I do simply to make the router work with my phone?
Is there any new device in the network? If there is turn off all wifi devices restart the ap and try to reconnect.
Try changing the ap name too.
Hope it helps!
Sent from my Desire HD using XDA App
Last resort might be to factory reset the router, then putting all the settings (e.g. WPA keys) back on.
aspirina said:
Is there any new device in the network? If there is turn off all wifi devices restart the ap and try to reconnect.
Try changing the ap name too.
Hope it helps!
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
There are no new devices in the network. Thanks.
olivierlee said:
Last resort might be to factory reset the router, then putting all the settings (e.g. WPA keys) back on.
Click to expand...
Click to collapse
I will try this later on and report back, thanks
The simplest way is to set your router to a open network. Then no key is needed by the phone. The phone SHOULD connect with no problems.
You then no its a key issue.
olivierlee said:
Last resort might be to factory reset the router, then putting all the settings (e.g. WPA keys) back on.
Click to expand...
Click to collapse
+1
If it's not DHCP issue then it looks like authentication one. So wipe the router's configuration and if this doesn't work either I have another solution for you. It involves a hammer and an alibi
FINALY today i get my galaxy s2. now you will have my suportt guys
But i have a "problem"
My router is set to WPA/WPA2 PSK...when i enter my password it will not connect,just obtaining ip adress.
when i manualy put my mobile's MAC adress in router then its working,but its scaning every 5sec...
So can someone please say why i canot conect trough my password and why it keeps scaning after im allready conected(but only trough MAC adrees) tnx
You seem to be confusing a few terms, but it would appear you have MAC address filtering set up in your router. That's generally a false sense of security. It's normal for the wifi to be scanning even when connected.
ah so...i didnt know this. But altough im conected,i canot access internet...it must be something with my router...anyone knows?
i conect to my laptop normaly...
sometimes my router doesn't connect to my phone but does to my laptop as well, and sometimes visa versa, try rebooting router and devices. that usually works for me,
PsychoGjost said:
sometimes my router doesn't connect to my phone but does to my laptop as well, and sometimes visa versa, try rebooting router and devices. that usually works for me,
Click to expand...
Click to collapse
I changed from wpa/wpa2 psk to wep and it has curred the problem on both of my sgs2. I have tried this on my friends router with the same method and heis also claiming a fix
Sent from my GT-I9100 using XDA App
As stated, when my phone (HTC One S) is connected to my WiFi network, I can't connect with my tablet (A500, Thor ICS v170). It just keeps trying to obtain IP address and never connects.
Weird thing is, if I turn both devices off, connect my tablet to the wifi first and then connect my phone it will work. This only happens when my phone is connected first.
Is this a software issue? Is it something to do with my router and maybe a lease or some network thing? Please help..this is very annoying.
tgtoys said:
As stated, when my phone (HTC One S) is connected to my WiFi network, I can't connect with my tablet (A500, Thor ICS v170). It just keeps trying to obtain IP address and never connects.
Weird thing is, if I turn both devices off, connect my tablet to the wifi first and then connect my phone it will work. This only happens when my phone is connected first.
Is this a software issue? Is it something to do with my router and maybe a lease or some network thing? Please help..this is very annoying.
Click to expand...
Click to collapse
Did you check your router settings? It sounds like your DHCP is not set Automatic. Which router do you use? Making sure that you don't use static IP addresses.
Looks to me like you have a static IP configured for your a500, which conflicts with your HTC. Check settings on a500.
Sent from my HTC Wildfire using xda app-developers app
jecee said:
Looks to me like you have a static IP configured for your a500, which conflicts with your HTC. Check settings on a500.
Sent from my HTC Wildfire using xda app-developers app
Click to expand...
Click to collapse
If he had static IP set in tablet it wouldn't try to obtain the address at all. It would just connect to the Wifi skipping that part.
@tgtoys:
I think that this can be a router incompatibility problem. Unfortunatelly not every wifi equipment is built with 100% conformance to the standards. Sometimes two devices just don't want to work with each other (and, for example, they both claim that are 802.11g compatible).
If you have a possibility then try with another router.
Other cause can be a router software misconfiguration. Router factory reset would probably help in this case but you would need to reconfigure your WAN and wifi settings. But this won't eliminate the problem if it is the hardware incompatibility.
tgtoys said:
As stated, when my phone (HTC One S) is connected to my WiFi network, I can't connect with my tablet (A500, Thor ICS v170). It just keeps trying to obtain IP address and never connects.
Weird thing is, if I turn both devices off, connect my tablet to the wifi first and then connect my phone it will work. This only happens when my phone is connected first.
Is this a software issue? Is it something to do with my router and maybe a lease or some network thing? Please help..this is very annoying.
Click to expand...
Click to collapse
Another problem I could think of is you have your phone's hotspot setting turned on that's why your tablet couldn't connect when there are two different Wi-Fi, that's just my guess.
Thanks all.
I am not currently using static ip on either device, and this seems to happen whenever I try to connect to Wi-Fi (home, work, and friends house), which is why I'm so confused. I will check settings on router when I get back. I haven't changed anything on the router other than add a wpa2 password...
Sent from my HTC VLE_U using xda app-developers app
The issue I experienced was the following.
I entered a WPA Password that had a large number of characters. Although the router accepted the number of characters, once I wanted to connect more than one or two devices I experienced the same problem as you.
I did get a WiFi connection but did not receive an IP and the connection was dropped.
After reducing the number of characters (but increasing the complexity) it worked fine.
Btw. it was a Netgear router.
I resolved the issue at work by assigning my phone and tablet with different static IP addresses on the router. How will this effect connecting to other routers?
tgtoys said:
I resolved the issue at work by assigning my phone and tablet with different static IP addresses on the router. How will this effect connecting to other routers?
Click to expand...
Click to collapse
When you say "other routers" you mean at your home? Or at other places like public wifi? If at your home, you can assign static IP addresses but not at public wifi because you can't control the router settings.