Hi, i have a issue here.
I downgraded from kiikat portugal 16gb d802 to jelly bean d80210a and i´m having issues.
after the downgrade, rooted successefully, then i installed Freegee to install CWM, it installs withou errors and i can use it, but as soon as i try to flash Phillz recovery for example, or any other file, it gives an error with mapping the aboot with loki.
do any of you guys know anything about it ?
i tried multiple jelly beans verisons 10A, 10B, 10E and all of them with the same error, i used 2 ways to downgrade, the back to stock mode in this forum, and another one with the LG Flash Tool, that flashes .tot files
every single time the same error...
i have no idea were to go from here, so some help would be apretitated..
Thanks very much in advance for you time
Related
Hello, I'm new here and I have a problem.
About 2-3 weeks ago I flashed my Optimus l7 to cyanogenmod 10.2 nightly. (I have my device rooted, The last version of cwm and bootloader unclocked)
Now I really want to install the old v10a ICS back on my device but I can't.
I followed this thread: http://forum.xda-developers.com/showthread.php?t=2204614
But when I saw that when I try to flash that rom, it loads about 25% and then "setup coplete". I installed the wi-fi fix, and keyboard too.
Even after I make a factory reset, my phone is stuck at the LG logo.
I'm lucky because I forget to delete the cyanogen zip from sd card, so I flashed it again
.
I really need some help. I fell like I'm stuck with cyanogen forever... Kdz updater doesn't work with this rom..
Thanks for reading this.
You do it for baseband ? Install CWM , then get some flashabe baseband ZIP .
You do it for soft ? Get some Stock v10 flashable ZIP and baseband too .
Something else ? Get some v10 DOWNGRADE KDZ image ...
I have the same problem that OP have, it would be great if we hear solution
thanks
Hey guys,
I have been for hrs trying to find a way to update to Kit Kat to no avail.
I was on Kit Kat on my D800 but decided to try CloudyG3 rom to get a feel for the G3 interface etc.. but, I didn't like a few things and wanted to revert back to my stock Kit kat since I have a backup.
I was able to use the TOT method with LG Flash tool etc.. but the only stock firmware I was able to successfully install is D80010o. I have searched and found a thread explaining how to install Kit Kat, but the link to download the version is not working and the mirror takes you to the jelly bean ones.
I can't update it via the phone as an OTA update either. I need to get back to Kit kat so that the backup I made will accept the restore of my old settings.
How can I go back to stock kit kat, please help me find a way. I will greatly appreciate it.
thanks
Why can't you update it via an OTA update?
root, autorec and install a rooted stock rom
redduc900 said:
Why can't you update it via an OTA update?
Click to expand...
Click to collapse
When I check it tells me there are no updates available for my phone that I am up to date at 4.2.2
maybe it is because I messed with flashing the baseband? It says I have version ending 1.0.190034
Are these the files you downloaded?...
LGD800AT-01-V10o-310-410-OCT-19-2013.zip
LGD800_20130904_LGFLASHv160.dll
... then used LGFlashTools v1.8 to flash the *.tot per the instructions in the second part of the OP in this thread:
http://forum.xda-developers.com/showthread.php?t=2432476
redduc900 said:
Are these the files you downloaded?...
LGD800AT-01-V10o-310-410-OCT-19-2013.zip
LGD800_20130904_LGFLASHv160.dll
... then used LGFlashTools v1.8 to flash the *.tot per the instructions in the second part of the OP in this thread:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
that's exactly right.. although when they send you to the link to download the TOT file there are 2 tot files. One is the one you showed here and the other is V10d with a date of August. They do not specify which to install. I did it with the V10d. then trying to fix it with the V10o but the flash tool would not install it and gave me an fail load error. so I kept it at V10d. Now I am stuck with jelly bean apparently?
See if you can get this method to work...
[Guide] Unroot/Unbrick - flash official factory firmware with LG Launcher
http://forum.xda-developers.com/showthread.php?t=2471370
redduc900 said:
See if you can get this method to work...
[Guide] Unroot/Unbrick - flash official factory firmware with LG Launcher
http://forum.xda-developers.com/showthread.php?t=2471370
Click to expand...
Click to collapse
hey man.
I tried it and the LG mobile tool said that My device has the latest software available from LG Mobile support Tool. and a pop up window says "no upgrade items to fix"
Gotta tell you though that today I had a message on my phone saying I had an update available and when it booted to the android logo to start the process it said that my phone was rooted and that I can't get the update (because of that)
So I probably need a way to just unroot my phone and get back to completely stock as If I was starting from zero.. Is there a simple way to unroot?
Try this:
http://forum.xda-developers.com/showthread.php?t=2663369
Edit: After 20c is flashed and says it is up to date, just contact AT&T and ask them to manually push the 20u update to your phone. That is what I had to do.
Sent from my LG-D800
So, first got my LG G2. Was on 4.4.2. Managed to get custom recovery on it, cool. Attempted flashing resurrection remix. Success, bootloop.
TOT'd back to stock firmware, 4.2.2. Managed to root device, and place custom recovery on it after multiple apps because I don't understand what the f*** "Loki" Is, or anything. So I attempted to flash 4.4.2 ROM, failed. Cool. Attempted to flash resurrection remix again, got aboot error, and loki-ifying failure of some stuff. Rebooted device, bootloop. Cool. So, how do I place lollipop on the LS980 4.2.2?
@edit, got LiquidSmooth 4.4.4 ROM on there from 4.2.2. Had audio error, flashed newer nightly of LiquidSmooth, got bootloop. Flashed KK Baseband from Cloudy's thingy for the LS980, ran CloudyG2 LP Rom, installed via aroma, now I'm stuck in fastboot. gg.
Are you sure you're flashing the right versions? i.e. D801 for T-Mobile, etc
zeeebs said:
Are you sure you're flashing the right versions? i.e. D801 for T-Mobile, etc
Click to expand...
Click to collapse
Yeah, it was stated on by the pages of which, LS980 (Sprint), VS980(Ver) 802, int.. Etc.
Now I'm having to attempt to modify tot files to change model versions because my phone
Appears to be model LG-F320S in Download mode, but it's not. I flashed CloudyG2 3.0, and his LS980 KK Baseband
And that's what occured me to get stuck in fastboot mode. Now I've been reflashing stock firmware img's and I can't
Get back into fastboot mode, so I'm stuck in Downloading Mode but as I modify the hex, and try to do the tot file, I
Continuously get wrong model number. It's kinda aggravating...
@edit, managed to get back to 4.2.2 stock firmware with this http://forum.xda-developers.com/sprint-g2/general/dll-to-bypass-lg-flash-tool-model-check-t2990665
Now how do I upgrade to Lollipop?
Hey people.
After going back to Lollipop stock, I tried re-rooting and reinstalling recovery.
I tried to use both OneClickRootRecovery and the SRK tool - and in both I get the same problem.
Root seems to be fine and recovery does appear, but with one little thing - I can't flash ANYTHING.
Getting the "Error executing updater binary in zip" when flashing anything.
I tried a ROM, and even the latest TWRP zip. Always the same error.
Any idea how to solve this?
Updating "updater-script"
I am having the same issue on my lg d802. I read in few threads to edit "updater-script" file. I downloaded roms meant for d802 and replaced all "d800" appearing in updater-script with "d802" (not sure that this is what was to be done).
Tried flashing the rom with updated updater-script but still getting the same error message.
Someone kindly help.
Attaching screenshot related to previous post
aryansingh163 said:
I am having the same issue on my lg d802. I read in few threads to edit "updater-script" file. I downloaded roms meant for d802 and replaced all "d800" appearing in updater-script with "d802" (not sure that this is what was to be done).
Tried flashing the rom with updated updater-script but still getting the same error message.
Someone kindly help.
Click to expand...
Click to collapse
Attaching the screenshot of my error:
UPDATE: After extensive reading threads I found the solution. Need to flash jellybean bootloader using "bootloader changer" and then flash AOSP based roms. To restore the stock lollipop one should flash kitkat bootloader back.
The easiest for you who are installing aosp/cm roms is:
1. flash kk stock
2. root and use autorec for kk
3. flash the roms you desire
jelly bean
aryansingh163 said:
Attaching the screenshot of my error:
UPDATE: After extensive reading threads I found the solution. Need to flash jellybean bootloader using "bootloader changer" and then flash AOSP based roms. To restore the stock lollipop one should flash kitkat bootloader back.
Click to expand...
Click to collapse
Does 4.2.2 contain jellybean bootloader? i tried to flash cm12 from 4.2.2 on g2 d800 and nasty error executing update ... appears, what now?
so got d802, rooted, used autorec for twrp, flashed cloudy 3.3 and now have the dreaded black screen,
managed to get into TWRP but pc not recognising phone?
what can i do, i presumed because phone was on kitkat it automatically had a kitkat baseband....
on further reading infact it does not, cant find any of the basebands to flash it,,
managed to get OTG working
any help
cheers
sutty86 said:
so got d802, rooted, used autorec for twrp, flashed cloudy 3.3 and now have the dreaded black screen,
managed to get into TWRP but pc not recognising phone?
what can i do, i presumed because phone was on kitkat it automatically had a kitkat baseband....
on further reading infact it does not, cant find any of the basebands to flash it,,
managed to get OTG working
any help
cheers
Click to expand...
Click to collapse
you were on kit kat and flashed a stock based LP rom ? not sure but didnt you have to be on stock LP then flash cloudy.
maybe flash a KDZ theres flasjable ones as zip for LP.
what i done from kitkat is
root/autorec. update twrp 2.8.7.3/bootstacks 5.02. bumped KK. you know you must reboot recovery into recovery again from recovery to take effect. during update of twrp and bootsacks then flash LP KDZ stock. then just wipe and flash cloudy.
Cheers managed to flash cloudy g2.2 over it,
Gps is terrible though