[Lg P700] I want to install the stock ICS - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

Hello, I'm new here and I have a problem.
About 2-3 weeks ago I flashed my Optimus l7 to cyanogenmod 10.2 nightly. (I have my device rooted, The last version of cwm and bootloader unclocked)
Now I really want to install the old v10a ICS back on my device but I can't.
I followed this thread: http://forum.xda-developers.com/showthread.php?t=2204614
But when I saw that when I try to flash that rom, it loads about 25% and then "setup coplete". I installed the wi-fi fix, and keyboard too.
Even after I make a factory reset, my phone is stuck at the LG logo.
I'm lucky because I forget to delete the cyanogen zip from sd card, so I flashed it again
.
I really need some help. I fell like I'm stuck with cyanogen forever... Kdz updater doesn't work with this rom..
Thanks for reading this.

You do it for baseband ? Install CWM , then get some flashabe baseband ZIP .
You do it for soft ? Get some Stock v10 flashable ZIP and baseband too .
Something else ? Get some v10 DOWNGRADE KDZ image ...

I have the same problem that OP have, it would be great if we hear solution
thanks

Related

Help Please! Device Not Booting.

Hello Guys, Noob here.
I Rooted My LG E400 L3 Some Months Ago And Installed CWM And CyanogenMod 9 ICS - Nightly. But i removed It for Some Network Issues.
By Mistake I Did The OTA Update Usiing Software Update From The Device. After Updating I Just Get The CWM Recovery Screen On Booting. I Tried To Flash Some Backups, And CM9 Also But It Didn't Worked. I Also Tried Flashing Stockrom Which Also Failed! Finally I Tried To Flash The Firmware Using KDZ Updater But When In Emergency Mode I Flash The KDZ File It Says Phone Was Not Found! I Think It is Because My USB Debugging Is Not On And I Cannot Do It Also Coz The Phone Is Not Booting Up.
Please Help Me Guys What To Do!! Please Help ME!
AppY.fTw.wOw^ said:
Hello Guys, Noob here.
I Rooted My LG E400 L3 Some Months Ago And Installed CWM And CyanogenMod 9 ICS - Nightly. But i removed It for Some Network Issues.
By Mistake I Did The OTA Update Usiing Software Update From The Device. After Updating I Just Get The CWM Recovery Screen On Booting. I Tried To Flash Some Backups, And CM9 Also But It Didn't Worked. I Also Tried Flashing Stockrom Which Also Failed! Finally I Tried To Flash The Firmware Using KDZ Updater But When In Emergency Mode I Flash The KDZ File It Says Phone Was Not Found! I Think It is Because My USB Debugging Is Not On And I Cannot Do It Also Coz The Phone Is Not Booting Up.
Please Help Me Guys What To Do!! Please Help ME!
Click to expand...
Click to collapse
I think You are bricked ur device
try reboot your phone while flashing kdz. this will detect your phone. if you can enter emergency, it not dead
AppY.fTw.wOw^ said:
Hello Guys, Noob here.
I Rooted My LG E400 L3 Some Months Ago And Installed CWM And CyanogenMod 9 ICS - Nightly. But i removed It for Some Network Issues.
By Mistake I Did The OTA Update Usiing Software Update From The Device. After Updating I Just Get The CWM Recovery Screen On Booting. I Tried To Flash Some Backups, And CM9 Also But It Didn't Worked. I Also Tried Flashing Stockrom Which Also Failed! Finally I Tried To Flash The Firmware Using KDZ Updater But When In Emergency Mode I Flash The KDZ File It Says Phone Was Not Found! I Think It is Because My USB Debugging Is Not On And I Cannot Do It Also Coz The Phone Is Not Booting Up.
Please Help Me Guys What To Do!! Please Help ME!
Click to expand...
Click to collapse
try my method
http://forum.xda-developers.com/showpost.php?p=45988501&postcount=23
works for me everytime
tnx all of u guys i slvd the prblm

[Q] Recovery inaccesible problem

Hi, I have a very senitive problem with my G2 and I can't solve it.
So I am not new to rooting and flashing but this never happened to me...
I installed TWRP on my international unlocked LG G2 D802 and flashed stock LG 4.4.2
All good but..now I can't acces any recovery. When I want to enter recovery mode. It says boot verification failed and then it just stays on black screen.
So I tried installing CWM and same thing, back to TWRP and same thing...
So I tought, what if I install CM 11 with cyanogenmod installer, cause they install all the things for you right?
Is this dangerous or something?
Please help me if you can.
Did u even read the other threads on 4.4.2
There is like 500+ answers to this on this forum..
You can't install Kitkat and keep custom recovery without some workarounds. Now you would have to downgrade to Jellybean and update the correct way to keep it.

Grola ROM problem d802

hi guys.couple days ago i installed grola rom flash kk baseland than rom.everything was fine until i download grola rom v1.2 . i tried to flash it with twrp but there was some errors like: error cant open /misc/.. something like this.so i tried flash stock rom 4.4.2 with lg flash tool.it's done succesfull but rom won't start.lg logo than start sound and it repeat again and again :/ any help
go to stock recovery and select factory reset.
krija said:
go to stock recovery and select factory reset.
Click to expand...
Click to collapse
problem solved.downgrade with TOT stock flash jelly bean than update to 4.4.2
kdz method not working

Black Screen after Flashing over Stock

so got d802, rooted, used autorec for twrp, flashed cloudy 3.3 and now have the dreaded black screen,
managed to get into TWRP but pc not recognising phone?
what can i do, i presumed because phone was on kitkat it automatically had a kitkat baseband....
on further reading infact it does not, cant find any of the basebands to flash it,,
managed to get OTG working
any help
cheers
sutty86 said:
so got d802, rooted, used autorec for twrp, flashed cloudy 3.3 and now have the dreaded black screen,
managed to get into TWRP but pc not recognising phone?
what can i do, i presumed because phone was on kitkat it automatically had a kitkat baseband....
on further reading infact it does not, cant find any of the basebands to flash it,,
managed to get OTG working
any help
cheers
Click to expand...
Click to collapse
you were on kit kat and flashed a stock based LP rom ? not sure but didnt you have to be on stock LP then flash cloudy.
maybe flash a KDZ theres flasjable ones as zip for LP.
what i done from kitkat is
root/autorec. update twrp 2.8.7.3/bootstacks 5.02. bumped KK. you know you must reboot recovery into recovery again from recovery to take effect. during update of twrp and bootsacks then flash LP KDZ stock. then just wipe and flash cloudy.
Cheers managed to flash cloudy g2.2 over it,
Gps is terrible though

LG G2 Bootloop, can't get into TWRP

Hi everyone, I perhaps kill my old lg g2 [R.I.P], but maeby you find a solution for that. This is my story.
Today I want to install MIUI 8 so i download one .zip file from this forum. Like always i do full wipe and then install ROM. everything be normal, ROM be installed and i started setting my new OS. After few sec, i can't go thought the setting cuz there be a error. I decided to reinstall system one more time, and this is that moment when I know I f**k up. Off my phone, wanna on TWRP and then i see i can't do anything, phone stuck in LG logo.
Any ida what to do?
Thanks for all ideas.
Maybe go back to a stock ROM and start over? This thread may be helpful in getting back to stock: https://forum.xda-developers.com/showthread.php?t=2432476
The thread helped me go from Cloudy 3.2 to stock MM on a d802.
audit13 said:
Maybe go back to a stock ROM and start over? This thread may be helpful in getting back to stock: https://forum.xda-developers.com/showthread.php?t=2432476
The thread helped me go from Cloudy 3.2 to stock MM on a d802.
Click to expand...
Click to collapse
Right so I'm facing two problems with going back to stock method:
1) as i said, the phone won't boot up on flashing ANY version of d802 firmware (I've observed that in lg flash tool, where you flash tot files, shows that the phone's model number is d802at. So I'll try flashing a d802at fw for the last time and see if it works)
2) i try to flash an ls980 fw, the flash tool gives a model number error. (If flashing d802at fw doesn't work, then i guess i have to modify the hex data in the ls980zve.tot file and force flash it on the phone)
I'll give you an update after something has happened.
@ audit13 it is work!!! Thanks for your help! And I have one last question, I still have root acces and TWRP installed?
Glad it worked
You should be back to stock recovery and no root.

Categories

Resources