After the OTA to 4.4 when i connect my S4 i9505 on an USB port windows didn't recognize the hardware and driver installation will fail.
on a clean (formatted) pc, I've installed KIES but the problem still the same.
Note: The charge battery works fine... so I guess it's a software problem, I hope
Related
Hi,
I have this problem for a long time... When i connect my I9000 to my PC i get this message " device has malfunctioned ". I have installed all the necessary drivers including kies.! I have Galaxy Ace which connect and works fine in the same PC. Only when i connect my I9000 it only starts charging and nothing happens to my device.
Can you guys help me out??
Any solutions>>!??
Try to uninstall Kies and all the drivers that came with it and then reinstall only the drivers. This should work
Hi, I have S4 1 year now. I have problem connecting my phone in my pc. I cannot connect it in kies, or like a mass storage, even in download mode is impossible. All time it says uknown usb, cannot recognised. I have tried AEL Kernel and Alucard, I dont know what is the problem. I have one desktop and one laptop with windows 8.1 and I cannot connect it. In my work having an hp with windows 7 it works like a charm as a mass storage but I cannot flash or install kies because I don't have administration privileges. I tried to unistall all drivers and kies and reinstall them but still the same. Any ideas ?
Any help ?
Hello everyone I've got an issue with my Nexus 4 which is why I registered, as I simply don't know what to do anymore.
My Nexus 4 is not recognized via USB at all, there is no connection sound and ist does not appear in the device manager.
It is charging and does show USB charging if I tap the battery icon.
Things I tried:
Uninstall/Install Driver with and without WugFresh Toolkit (USBDeview)
different Pcs (different USB Ports)
different USB cables which all worked with other mobile devices such as Samsung S3/4/5 mini
checking and unchecking MTP,PTP and Usb debugging
fastbootmode
factory reset
replaced the USB flex cable as i figured it would be defect
I tried to root it with some of the apps available bur none of them work with LMY48T.
I think it might be firmware related but because I didn't flash a Custom Recovery the last time I rooted it I have no possibility to flash another rom.
The root access was lost when the last OTA Update arrived which is why I can't install a custom recovery via the clockworkmod Rom Manager.
The Pc I'm working with is running on Win 10 I'm running out of ideas.
Please help me, thank you
hello
i have a problem with my g928f
my issue is that it can not be regognized by the windows
i have tried at my desktop with win 10 and at my laptop with windows 7 and at both says unknown device,
i have tried everything i know of
unistall everything from the pc regarding samsung drivers
install it again , nothing
install smart switch , nothing
install kies, nothing
run odin , not even see the phone at download mode
made factory reset from recovery , nothing
charge is working just fine both from pc and my wall charger
i tried mhl hdmi and nothing happened
tried just now otg cable with a usb drive , again nothing
just a week ago i was using it just fine with my pc
should i take it to a store to check my micro usb port??
noone??
today i replaced the screen with a new one witch had a new usb dock on it and the problem is still here
i can not connect it to any pc.
i cann't flash the stock rom because odin is not see it also
is it possible to be a rom problem????
i can't flash the stock one because of the usb issue
but i think i can download another lollipop rom to give it a try.
Have you made sure that it is set as MTP?
Setting - Storage - USB.
Check if the device gets connected in Fastboot mode. If it doesn't then it would be your USB.
sideload is not working either
usb is brand new and original.
is there a way to flash stock rom via recovery?
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
Try disabling and enabling USB debugging while the phone is connected.
GDReaper said:
Try disabling and enabling USB debugging while the phone is connected.
Click to expand...
Click to collapse
Thanks for your reply, i've tried this many times, even when typing "adb devices", adb can't find my phone and it doesn't appaer in windows Device manager
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
I have the exact same probleme... Odin work but no mtp....Have you found a solution ?