How can I multiboot WP7.8 and Native SD Android? I have already installed Native SD android with MAGLDR and that kind of stuff. But how can I install WP7.8 and multiboot?
Thanks!
erlend53 said:
How can I multiboot WP7.8 and Native SD Android? I have already installed Native SD android with MAGLDR and that kind of stuff. But how can I install WP7.8 and multiboot?
Thanks!
Click to expand...
Click to collapse
There are guides eg http://forum.xda-developers.com/showthread.php?t=1880905
And wp7 has to be done first http://forum.xda-developers.com/showthread.php?t=913815 then you already know how to set up nativeSD partition and install
Remember to back up anything first since installing wp7 will wipe everything on your card
Robbie P said:
There are guides eg http://forum.xda-developers.com/showthread.php?t=1880905
And wp7 has to be done first http://forum.xda-developers.com/showthread.php?t=913815 then you already know how to set up nativeSD partition and install
Remember to back up anything first since installing wp7 will wipe everything on your card
Click to expand...
Click to collapse
Okay. Thanks. I have decided to just go for WP7.8. Do I have to do full wipe(Task29) and flash MAGLDR again? Also do I need to use the UseLast24NAND on Pdaimatejam's rom, I dont want to brick my phone, have read that it can brick it? I am just going to format the SD card into FAT32, and CLEARSD MBR?
erlend53 said:
Okay. Thanks. I have decided to just go for WP7.8. Do I have to do full wipe(Task29) and flash MAGLDR again? Also do I need to use the UseLast24NAND on Pdaimatejam's rom, I dont want to brick my phone, have read that it can brick it? I am just going to format the SD card into FAT32, and CLEARSD MBR?
Click to expand...
Click to collapse
Check out dxdy's signature http://forum.xda-developers.com/showpost.php?p=51281627&postcount=3614 full of good links and a tutorial.
you will have to use last 24mb and clear sd mbr
as for task29, don't think it is necessary. wp7 installation formats nand and sdcard to create one raid type memory over both medias
don't think formatting sdcard is necessary either, but if you do, use https://www.sdcard.org/downloads/formatter_4/
good luck
Robbie P said:
Check out dxdy's signature http://forum.xda-developers.com/showpost.php?p=51281627&postcount=3614 full of good links and a tutorial.
you will have to use last 24mb and clear sd mbr
as for task29, don't think it is necessary. wp7 installation formats nand and sdcard to create one raid type memory over both medias
don't think formatting sdcard is necessary either, but if you do, use https://www.sdcard.org/downloads/formatter_4/
good luck
Click to expand...
Click to collapse
Thank!
Well ...
erlend53 said:
How can I multiboot WP7.8 and Native SD Android? I have already installed Native SD android with MAGLDR and that kind of stuff. But how can I install WP7.8 and multiboot?
Thanks!
Click to expand...
Click to collapse
Dear Friend ... maybe this can help you ... Good luck ... and if had any problem , just tell me ...
With Best Wishes
Hitman1376
how to think, which is better android or WM?
hi
Nice to meet you guys.
which is better android or WM?
Related
I was wondering if it would be possible to either Boot Windows Phone 7 through MAGLDR from the SD Card like you can Android by maybe partitioning the SD Card so it cn have it's own space?
Or a more realistic option which would be to have a NAND ROM that includes both Android and WP7 installed to the NAND and partition the SD card for storage? This second option I believe could be possible if the NAND is partitioned correctly to allow them both to run and then you could select them in the MAGLDR!
I would like some dev feedback on this as I would try building a ROM myself but I don't know the workings of the partitioning system in MAGLDR well enough to try!
Thanks in Advance for any help!
Maby this is what you are looking for?
http://forum.xda-developers.com/showthread.php?t=913815
Cheers
Fabian1985 said:
Maby this is what you are looking for?
http://forum.xda-developers.com/showthread.php?t=913815
Cheers
Click to expand...
Click to collapse
I've seen that but what I want is to boot Android and WP7 from NAND NOT run android from the SD Card like that guy done because that makes android run slow and I want android as my primary OS!
microang said:
I've seen that but what I want is to boot Android and WP7 from NAND NOT run android from the SD Card like that guy done because that makes android run slow and I want android as my primary OS!
Click to expand...
Click to collapse
I run Android from SD as my primairy OS, WP7 is on NAND just to play with and test it. I tried Android on NAND, but to me it wasn't noticably faster then when running from SD.
Cheers,
/Cacti
Snap I'm using sd build of Android from magldr and it runs fine even boots ok, there might be a little lag when doing something the first time but other than that its great
DJGurth said:
Snap I'm using sd build of Android from magldr and it runs fine even boots ok, there might be a little lag when doing something the first time but other than that its great
Click to expand...
Click to collapse
Well the thing is I like to use a fully fledged Desire HD ROM and it's stupidly slow from the SD card... my current build is squashfs'd so only takes up about 200mb for the actual OS and I'm sure WP7 could be fitted in the rest of the space and like I'm doing now I can use EXT4 on the sd for data! Now what's needed is if someone can build a hybrid ROM!
le_cactus said:
I run Android from SD as my primairy OS, WP7 is on NAND just to play with and test it. I tried Android on NAND, but to me it wasn't noticably faster then when running from SD.
Cheers,
/Cacti
Click to expand...
Click to collapse
Hi, anyone can share how to u do this ? is it through the method that uses 2 sd cards during the formatting stage ?
Btw, what if i dont mind swapping sd cards for diff os ? Can this be done and how ? I tried to insert another sd card which I previously use for my android sd build, tried the sd boot , it gave an error of sd kernel . anyone can advise ?
Thanks !!
hello to everyone,since I am having big issues with my Nands bad blocks,I thought about installing Android rom into my SD card(with SD-Ext or something)anyone know if its possible please help me by giving me a tutorial or something
tsagas said:
hello to everyone,since I am having big issues with my Nands bad blocks,I thought about installing Android rom into my SD card(with SD-Ext or something)anyone know if its possible please help me by giving me a tutorial or something
Click to expand...
Click to collapse
basicly,I am not able to enter CWM or install android via SD method or via DAF.exe...so,I need to install everything into my SD card
Have a look here it might help with bad nand blocks.
http://forum.xda-developers.com/showthread.php?t=623356
You need magldr installed to to boot from sd card, just go to ant sd rom thread like maybe this one..
http://forum.xda-developers.com/showthread.php?t=1492488
and follow the install instructions..
tsagas said:
basicly,I am not able to enter CWM or install android via SD method or via DAF.exe...so,I need to install everything into my SD card
Click to expand...
Click to collapse
as long as you have magldr you can have as much SD Roms in your SD, check the link below, it might help.
mengfei said:
as long as you have magldr you can have as much SD Roms in your SD, check the link below, it might help.
Click to expand...
Click to collapse
my problem is that CWM doesnt boot cause of my bad blocks,so i need somehow to install the rom to the SD card
tsagas said:
my problem is that CWM doesnt boot cause of my bad blocks,so i need somehow to install the rom to the SD card
Click to expand...
Click to collapse
You don`t need CWM, just MAGLDR. Then you can choose folder on SD card to boot your android.
pavlo_js said:
You don`t need CWM, just MAGLDR. Then you can choose folder on SD card to boot your android.
Click to expand...
Click to collapse
Again,when its time to boot it stucks...with this method android is installed in my SD card or phone?
hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful
tsagas said:
hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful
Click to expand...
Click to collapse
I don't have any clue what your actual question is supposed to mean, but if you can't install SD Android then it isn't anything to do with bad blocks. You need to give more information, such as which type of HD2 you have, what radio it has, do you have HSPL, what steps you've taken so far etc. Nobody can help without sufficient information.
Sent from my NexusHD2 using XDA
Nigeldg said:
I don't have any clue what your actual question is supposed to mean, but if you can't install SD Android then it isn't anything to do with bad blocks. You need to give more information, such as which type of HD2 you have, what radio it has, do you have HSPL, what steps you've taken so far etc. Nobody can help without sufficient information.
Sent from my NexusHD2 using XDA
Click to expand...
Click to collapse
I have HSPL,my HD2 is a t-mobile my radio is 2.15.50,14 and i follow each and every step the guides i found in this foroum provide...whenever is NAND or SD version
tsagas said:
hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful
Click to expand...
Click to collapse
Do u have HSPL 2.08?
adil1508 said:
Do u have HSPL 2.08?
Click to expand...
Click to collapse
yes i do
tsagas said:
hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful
Click to expand...
Click to collapse
I still don't quite understand what the actual issue is. Do ANY ROMs boot on your phone? The reason I ask is because you later contradict this original statement by saying something about A2SD moving your apps to the SD card.
Nigeldg said:
I still don't quite understand what the actual issue is. Do ANY ROMs boot on your phone? The reason I ask is because you later contradict this original statement by saying something about A2SD moving your apps to the SD card.
Click to expand...
Click to collapse
None ROM boots on my phone:/and i asked if A2SD installs the rom into SD or something...
tsagas said:
None ROM boots on my phone:/and i asked if A2SD installs the rom into SD or something...
Click to expand...
Click to collapse
A2SD does not install the ROM to NAND nor does it install NAND to SD. It install apps to your SD card, apps that you use on your phone.
NAND ROMs are flashed directly to your phone and completely remove Windows.
SD ROMS are ran from your SD card with your Windows still functioning when you want.
Dblfstr said:
A2SD does not install the ROM to NAND nor does it install NAND to SD. It install apps to your SD card, apps that you use on your phone.
NAND ROMs are flashed directly to your phone and completely remove Windows.
SD ROMS are ran from your SD card with your Windows still functioning when you want.
Click to expand...
Click to collapse
Hehe, Windows Mobile doesn't 'function', it simply exists
tsagas said:
None ROM boots on my phone:/and i asked if A2SD installs the rom into SD or something...
Click to expand...
Click to collapse
Have you installed MAGLDR and partitioned your internal memory by flashing ClockWorkMod Recovery(CWM)?? And Apps2SD doesnt install any rom. Its just used to transfer applications that run on the internal memory to the sd-ext.(partion of sd card)
Sent from my HTC HD2 using XDA
adil1508 said:
Have you installed MAGLDR and partitioned your internal memory by flashing ClockWorkMod Recovery(CWM)?? And Apps2SD doesnt install any rom. Its just used to transfer applications that run on the internal memory to the sd-ext.(partion of sd card)
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
thats the thing...every time i try to flash CWM i get stucked on Go Go Go!(when i press AD Recovery)
I ve also tried to make bigger partitions and nothing happened...
tsagas said:
I ve also tried to make bigger partitions and nothing happened...
Click to expand...
Click to collapse
I have a hd2 too.
magldr 1.13 .... clockwormod 5.0.2.6 ... Nexushd2 ics 4.0.4 - rom... a2SD-Script ...
200mb nand-partition..5mb cache-partition.. 1 gb ext4-partition and 400 mb swap-partition
I installed my rom witht "hd2 toolkit 4.2.0.1", that can be downloaded here on "xda-developers".
With this tookit you can do followed things:
- Start with a "full wipe" called "task 29" (I think this "task 29" is necessary for your hd2, because of your problems and bad issues you are reporting)
- then partition your nand-memory (for first install i recommen 200mb nand an 40 mb cache - after you recognized that it works, you can reduce cashe to 10 or 5 mb)
- install magldr
- install clockworkmod recovery
- install your rom
Hi Guys,
currently I have a Miui NativeSD Rom. It means the whole Android Rom is running at my SD Card. My questions is....can I install this WP7 ROM http://forum.xda-developers.com/showthread.php?t=1356833
with a another SD Card and my current not used NAND memory? I would change sometimes the Roms, between WP7 and Android but when I install WP7 I dont know whether crash my Native SD ROM?? Last question when I execute Task29, will be delete my current Nand ROM, but also Magldr??
Thanks!
hi, check out the links below it might help
& yes Task29 will wipe your NAND of any rom/ reccovery that's in there but leaves radio alone.
Ok if I understand aright, I follow the steps Task 29 / Install Magldr in the Boot Mode from HD2 Toolkit ( is a repartition to 300mb or 445mb recommend? Or can I skip the partition-step?)and then Clear SD MBR and uselast24Nand , execute this dwi from my WP7 Rom and installed WP7 on my NAND After this my Magldr is already there??! If yes I can change my SD Card so where I cand find my Native Files and boot from them??! ^^
OK , to do it. the nativesd roms wont be crashed. it only in ur sd card .
Sent from my HTC HD2 using xda app-developers app
Herobs said:
OK , to do it. the nativesd roms wont be crashed. it only in ur sd card .
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
?? I dont understand your answer.. only in my sd card?! I would change my sd card, when I install wp7 to a second card and after that I go back to my native sd card and boot with magldr from here. Thats my plan.... sorry my englishknowledge is very simple ^^ therefore I dont understand your answer
Sent from my HD2 using xda app-developers app
maikwars said:
?? I dont understand your answer.. only in my sd card?! I would change my sd card, when I install wp7 to a second card and after that I go back to my native sd card and boot with magldr from here. Thats my plan.... sorry my englishknowledge is very simple ^^ therefore I dont understand your answer
Sent from my HD2 using xda app-developers app
Click to expand...
Click to collapse
yes, that's what you should do. Card#1 for WP7 and Card#2 for SD or NativeSD.
but wp7 wont boot with the second card in slot. wp7 needs the first card(it formats and locks the card during installation)
Hello,
I just installed WP7 on HTC HD2, I tried to install some applications and memory is over.
How can I move applications from phone to sd card?
Sorry for my english
Thank you !
your SDcard not working (in WP7) if you dont have space... WP use SDcard as memory and SDcard must be in device when flashing ROM.... you cant put SDcard after WP7 flash... you must do hard reset or flash ROM again
read install tutorial from my signature or Pdaimatejam ROM download
dxdy said:
your SDcard not working (in WP7) if you dont have space... WP use SDcard as memory and SDcard must be in device when flashing ROM.... you cant put SDcard after WP7 flash... you must do hard reset or flash ROM again
read install tutorial from my signature or Pdaimatejam ROM download
Click to expand...
Click to collapse
How can i do that ? where i can found a tutorial ?
thanks
i told you: my signature or Pdaimatejam ROM topic