Hello people. I have to ask one question about my LG L5 E610.
My L5 E610 has stock 4.1.2 baseband 20G, most updated to date, I updated via KDZ updater.
I already rooted and installed custom ROM on three differents phones, ZTE and Samsung, never had any problems, so I can say that I have some experiences, but in case of samsung, for use warranty, is needed to install everything stock and reset flash counter, so I wonder if my E610 will be needed the same procedures ?
I'm thinking of installing CM10.2 on my LG L5 E610, I believe one day I will do this, but then I need to know how to install back EVERYTHING STOCK IN CASE OF WARRANTY, but never found tutorial about it, never heard if LG has flash counter, but I bet doesn't have.
anyone can tell me if it's possible or explain me how to install stock ROM, stock Recovery and stock Kernel after customizate everything on E610 ?
Never heard about flash counter.
For returning all to stock (as far as i know) you must have 2 kdz
1: v10d_downgrade , made by someone in 4pda, search it over internet. Its special because it wipes out everything, others kdz just flash up system and that's it, if you already have a bootloop or have a custom rom that may be not compatible with stock, normal kdz wont boot at all.
2: your OFFICIAL stock kdz for your VERSION (e610/e612/e612g/f, etc) get it from here
In case you want to return to stock, boot in download mode (hold vol - / + while connecting usb cable until vibrate) and flash it up. Flash v10d... let it boot (it'll be in russian lol) and then flash your normal kdz (by booting in download mode again)
Then, you can try anything you want (pls, don't mess with swap partition, 2 phones are almost hard-bricked while playing with that and it couldn't flash kdz either!)
Good Luck!
just use the kdz updater
Sent from my LG-P700 using xda app-developers app
raul338 said:
Never heard about flash counter.
Good Luck!
Click to expand...
Click to collapse
it's thing from Samsung, if users flash the custom rom, the phone will show how much custom ROM was flashed, it can be consulted in warranty that the phone has already flashed and the warranty will be voided. but there does exist methods to do reset flash counter, but I guess only Samsung phones do have it.
but what happens if I have everything custom and then flash the normal KDZ like 20g baseband ? Will be bricked ? and can be unbricked ?
the flash counter can be removed by triangle
Sent from my LG-P700 using xda app-developers app
my phone has root, free bootloader and with custom ROM and CWM.
KDZ updater won't work on Windows 8.1, installed msxml and put compatibility/administrator and no luck.
is there another way to flash downgrade v10 ?
RenatoNismo said:
my phone has root, free bootloader and with custom ROM and CWM.
KDZ updater won't work on Windows 8.1, installed msxml and put compatibility/administrator and no luck.
is there another way to flash downgrade v10 ?
Click to expand...
Click to collapse
kdz working on window 8. let try again. check your drivers installed
kien_vip said:
kdz working on window 8. let try again. check your drivers installed
Click to expand...
Click to collapse
anyway, yesterday I downloaded KDZ and it worked and flashed rom my phone.
maybe I got very recent KDZ or I have update 1 of Windows 8.1
Hello, i need give my G2 for the warranty, but before i wanted make G2 unrooted.
I flashed by LG Flasher Tool 2014 D802 V20G stock KDZ ROM. But after all.. bootloader still show "ROOTED"..
In LG RTC option it show "Disabled".
Anyone know how to back phone to unrooted status?
Ganjax said:
Hello, i need give my G2 for the warranty, but before i wanted make G2 unrooted.
I flashed by LG Flasher Tool 2014 D802 V20G stock KDZ ROM. But after all.. bootloader still show "ROOTED"..
In LG RTC option it show "Disabled".
Anyone know how to back phone to unrooted status?
Click to expand...
Click to collapse
If you want stay full stock you need to flash your original JB KDZ with Flasher Tool 2014. make a factory resert and update to KK by OTA.
If you want root, custom recovery don't need to flash nothing, just follow this threats.
http://forum.xda-developers.com/showthread.php?t=2703501
http://forum.xda-developers.com/showthread.php?t=2715114
Hi!!! I've got a LG G2 D802 WIth me, I tried to install a custom Recovery By Doing The Following steps.
1. I rooted My Phone That worked fine.
2. Then i installed autorec.apk to get a custom recovery on my phone, it lokified and reboted my phone and since then, i am in a bootloop.
I tried the following methods to get back to system but none worked.
1. i tried to flash my phone with three .kdz files but none worked.
2. i tried to upgrade recovery via LG Mobile Support tool, it installed a new software "D80220C", but it didn't work either.
i cant boot into recovery, only into download mode. i beg u all please help me as i am terribly helpless please Help me pleaseeeee!!!!!!!
Alcaedias said:
Hi!!! I've got a LG G2 D802 WIth me
Click to expand...
Click to collapse
Are you sure you have original D802? Because many refurbished D802 are in fact either D800 or D801.
You may need to open it and see main board.
hi. i have G2 which is infact AT&T model D800.
i have stock rom on it. 4.2.2 jelly bean.
i rooted it and also installed recovery using flashify software from playstore/
i downloaded Cloudy rom 3.3
and i first wiped, then i installed the bootloaded which was kk bootloader (this is the main issue i guess) then i flashed the cloudy rom and CHOOSE MY AT&T model.
after that it restarted and then i got into this weird boot issue.
now whenever i start phone it goes to firmware update page.
i go to lg flashtool and i try to flash the stock rom 4.2.2 for D800 but it says failed for model is different.
i choose D802 and it says same
i see that in firmware update page on phone, it says cloudy 3.3 and it says mobile version is 802 but my phone is actually 800.
but now neither 800 nor 802 stock firmwares are working on this piece of ****.
i also have backup of my stock rom in twrp but i cant go to twrp.
can someone help me what to do now?
aami.aami said:
hi. i have G2 which is infact AT&T model D800.
i have stock rom on it. 4.2.2 jelly bean.
i rooted it and also installed recovery using flashify software from playstore/
i downloaded Cloudy rom 3.3
and i first wiped, then i installed the bootloaded which was kk bootloader (this is the main issue i guess) then i flashed the cloudy rom and CHOOSE MY AT&T model.
after that it restarted and then i got into this weird boot issue.
now whenever i start phone it goes to firmware update page.
i go to lg flashtool and i try to flash the stock rom 4.2.2 for D800 but it says failed for model is different.
i choose D802 and it says same
i see that in firmware update page on phone, it says cloudy 3.3 and it says mobile version is 802 but my phone is actually 800.
but now neither 800 nor 802 stock firmwares are working on this piece of ****.
i also have backup of my stock rom in twrp but i cant go to twrp.
can someone help me what to do now?
Click to expand...
Click to collapse
Hex edit the tot to be a d802 then flash it
Sent from my LG-D800 using Tapatalk
I did this and now i cant use lg flash tool its says differnt model d802 and also the twrp has changed to the material one and its frozen in some areas i cant seem to wipe at all. I even tried the SRK tool cant do anything. Need help. Im rooted and in the download mode its still says the zen rom (turkish rom) d802 rooted. Do i need to download the euro kdz file and d802 tot?