I've tried asking this in the q&a section on the main thread but I think I'm being ignored because I'm asking a question about the at&t version inside a Verizon thread. Idk. But I've tried installing hyperdrive rls15 and I follow the instructions on the main page for at&t and I get to where I need to reboot and wait 10 mins. Well it just stays on the splash screen. I've tried repeating the install 4 time's now amd the same results. I found a tooic saying fix permissions but it fails. I'm sorry if this has been asked already. I have looked through several different threads but I may have overlooked it. My phone baseband is I337UCUAMDL im on 4.2.2 and have twrp v2.5.0.2 as my recovery. I've also verified the md5. any suggestions?
I hate to double post but if anyone has any ideas as to why this is happening I'm going to try and redownload and try loki patch I don't know if it's needed but I will try.
motel6man said:
I hate to double post but if anyone has any ideas as to why this is happening I'm going to try and redownload and try loki patch I don't know if it's needed but I will try.
Click to expand...
Click to collapse
Same problem here,
I'm going to try and install a kernel through TWRP. I've tried a fresh root / loki install, same issue.
For me, I remember having to install an AT&T compatibility pack.zip file on previous Hyperdrive releases, like RLS 10.
I tried to install RLS15 and at the very end of install, it says this:
Flashing Kernel
file_getprop: failed to stat"/tmp/aroma/kernel.prop": No such file or
directory
However, for some reason, after trying to install this new release, I was not able to restore data in TWRP from a backup of RLS 10. I was able to restore to a non-rooted backup (i don't know how), and it appears that I am not rooted anymore, and I don't think I have superuser anymore. So, I'm not exactly sure where to start.
Glad to see I'm not the only one this is happening to. Please let me know if you figure it out. I noticed the same thing but thought I seen someone else say that it was nothing.
so i redownloaded all files and nothing. tried loki patch and nothing. tried kt kernel because i seen another post with someone saying it was the only one that worked for them and nothing. im still stuck on splash screen. please if anyone knows how to fix this please let me know im desperate now. i really want to try this rom so any help would be greatly appreciated. thanks
Same here =/
Flashing a kernel before ROM didn't do anything.
I'm starting to think that we don't have Super User installed anymore, I tried re-installing some BackUps (rooted backups)
and TWRP said something like, you don't have SuperUser instyalled, want to install it? *Slide to Install* Phone quickly reboots (not showing any proof of Super User being installed in TWRP emulator) and still no effect.
When I get some time ill look into how to install SuperUser, which I thought was already put on when we root.
Have you tried installing any other ROMS with success?
Are you still on MDL? I am, and im starting to think i need to just go ahead and do the update from AT&T, and then switching over to Safestrap recovery, but i hope i can find another solution before doing all that.
Sent from my SAMSUNG-SGH-I337 using xda premium
d9vabder said:
Same here =/
Flashing a kernel before ROM didn't do anything.
I'm starting to think that we don't have Super User installed anymore, I tried re-installing some BackUps (rooted backups)
and TWRP said something like, you don't have SuperUser instyalled, want to install it? *Slide to Install* Phone quickly reboots (not showing any proof of Super User being installed in TWRP emulator) and still no effect.
When I get some time ill look into how to install SuperUser, which I thought was already put on when we root.
Have you tried installing any other ROMS with success?
Click to expand...
Click to collapse
I haven't tried any other roms yet. I haven't really seen any that I liked.
d9vabder said:
Are you still on MDL? I am, and im starting to think i need to just go ahead and do the update from AT&T, and then switching over to Safestrap recovery, but i hope i can find another solution before doing all that.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I'm still on mdl. I'm going to keep looking around for a solution. Please let us know if you found a way to fix it.
Also heres a screen shot of my info
motel6man said:
I've tried asking this in the q&a section on the main thread but I think I'm being ignored because I'm asking a question about the at&t version inside a Verizon thread. Idk. But I've tried installing hyperdrive rls15 and I follow the instructions on the main page for at&t and I get to where I need to reboot and wait 10 mins. Well it just stays on the splash screen. I've tried repeating the install 4 time's now amd the same results. I found a tooic saying fix permissions but it fails. I'm sorry if this has been asked already. I have looked through several different threads but I may have overlooked it. My phone baseband is I337UCUAMDL im on 4.2.2 and have twrp v2.5.0.2 as my recovery. I've also verified the md5. any suggestions?
Click to expand...
Click to collapse
Are you using Safe strap?
I was having the same problem after like 4 tries i figured out that every time I would download this it would go into the internal memory when it should have gone into the xd. I had to move folders manually. After that everything has been working correctly.
Do you know what folders have to be moved and where?
Sent from my SAMSUNG-SGH-I337 using xda premium
d9vabder said:
Do you know what folders have to be moved and where?
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I created a new one on the xd card named it roms so I won't forget.
All I did was go to Mounts in TWRP recovery and mounted my microSD card and this fixed the problem.
Sent from my SAMSUNG-SGH-I337 using xda premium
d9vabder said:
All I did was go to Mounts in TWRP recovery and mounted my microSD card and this fixed the problem.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
cool im going to go try it in a few mins thanks
i tried mounting both internal and external and still nothing can you go through the steps you did from start to finish maybe im missing something
Okay, so the first thing i did was mount my microSD(external sd) then a full wipe. Even though i was mounted to my sd card, i still had to navigate to my internal memory to select the zips i wanted to flash. I first installed an older release of Hyperdrive Rom, and during installation, i selected Full Wipe option again. i also added my AT&T compatibility pack.zip to be flashed right after the ROM. Also, i dont know if this affected anything, but i tried installing the T-Mobile compatibility pack on a previous attempt. I read somewhere where some1 did this and it worked for them, but it didnt work for me until i did another install of RLS15 and the ATT pack.
Hope this can help you
Sent from my SAMSUNG-SGH-I337 using xda premium
Related
Thanks to Android Police leak. The links provided will be for rooted users only.
Flash in Recovery Only!
AS A EXTRA MEASURE, I SUGGEST WIPE CACHE, DALVIK, AND IN CLOCKWORK UNDER "MOUNTS AND STORAGE" FORMAT /SYSTEM. You can keep your data if come from 2.11.605.0
I will be working on rooted only PURE stock, Rooted and Deoxed, and Debloat. So download away well as many times as my free account allows LOL.
None of this is thanks to me other than my time I am sure there is a whole list of people I can thank having to do with programs I have used Android-SDK & Kitchen, SU, and Busybox so I will say Thank you to them but other than that still trying to learn if someone wants to send some data my way, hit up the PM.
All versions have booted up on Android-SDK Emulator and on my phone. I was a little conservitive on the Debloat but it saved over 160MB so if I didnt take enough out for you, sorry.
Android Police Link for non-rooted users
http://www.androidpolice.com/2011/0...build-2-11-605-2-ruu-for-the-htc-thunderbolt/
Rooted Stock
http://www.megaupload.com/?d=V4H10NI7
MD5 - DFA537E258B8D297CB7A834A308689A7
Rooted Deoxed/Debloat
http://www.megaupload.com/?d=MOV2627N
MD5 - BB539379C297A5EACC592D51DD5F01CC
Looking to get a little more away from stock and want a Kernel to under/overclock link provided down below.
Read up on it here. http://forum.xda-developers.com/showthread.php?t=1260185
http://www.megaupload.com/?d=B4XM1ZZF (Kernel)
MD5 - 2530A337B92871E6BC75B1B9D4DE67F1
If anyone wants stock kernel if you don't like kernels you flashed I have a copy in zip I can post if needed.
As always I am not responsible for what happens to your phone please follow the instructions. I did an edit and I posted all the MD5s for these ROMs sorry it did slip my mind
thanks! does this have automatic Voicemail alerts?
I believe I read those are not fixed yet I know they may pop up but mine would only go away after a reboot, but the camera is fixed
Sent from my Synergized BOLT VIA XDA app
"If i helped you please thank me"
All Versions are up, MD5 are up, Kernel is up, and I am going to sleep. Let me know if they all work out for you who ever downloads them I did test each one on SDK and my phone I am now back to my Synergy ROM hope you enjoy your GB fix have a great day. Also thank me if you download this so I know my work was worth something
Tried stock rooted and deoxed niether will load even after complete wipe and sd format all i get is htc screen white back ground and thats it ???
Not Booting
Flashed, wiped everything, still stuck on HTC splash screen. Not working
Will look into it once again. All 3 loaded on mine if I run into issue will pull post till fixed. Anyone else having issues who is rooted and has flashed before?
Sent from my Synergized BOLT VIA XDA app
"If i helped you please thank me"
ghamden said:
Tried stock rooted and deoxed niether will load even after complete wipe and sd format all i get is htc screen white back ground and thats it ???
Click to expand...
Click to collapse
Wait did you say you formatted your SD card? I said system format.
Sent from my Synergized BOLT VIA XDA app
"If i helped you please thank me"
Same for me. White HTC screen. Wiped data, cache, dalvik formated system. Tried system mounted, not mounted.
Will pull till I can explain these issues
Till I get my RUU working for everyone you can download the rooted versions here
http://www.htcthunderbolt4g.com/htc...breadrockv1-0-v1-1-(newest-gingerbread-leak)/
Sent from my Synergized BOLT VIA XDA app
"If i helped you please thank me"
Anybody have radio versions for this RUU?
I don't think it has a new radio, just the same one from 2.11
Sent from my ADR6400L using Tapatalk
All files pulled till issues have been resolved.
Cubs2008 said:
Anybody have radio versions for this RUU?
Click to expand...
Click to collapse
It's the same radio as the previous leak. 817 for cdma and 802 for LTE
Sent from my ADR6400L using xda premium
thisismalhotra said:
It's the same radio as the previous leak. 817 for cdma and 802 for LTE
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
Yes same radios which to me suggest this is as close to OTA w/o the VM fix.
Uploading Stock_rooted now just did the whole thing over.
Deoxed_Debloat will be up in an hour
Thanks guys...I just wanted to check to make sure.
All versions are now redone and live in OP. I did test rooted_stock and worked fine I did not test rooted_deoxed_debloat since i work night shift and need sleep. Please let me know if there are any issues with these two files if you download them either way yes or no. Thx.
Sent from my Synergized BOLT VIA XDA app
"If i helped you please thank me"
I'm not sure it is a problrm with the zip. I think it may be a cwm problem. I tried the link you posted for the other site and same white screen. When I try to do more than two maneuvers (for lack of a better term) in cwm I get the android in the box with the arrow. Going to try to find the .zip for cwm and reflash it.
Rooted and DEOX'ed file stuck on white screen
Same issue here, stuck at the white HTC screen
i've tried all of the rooted zips and md5 checked out fine.
Not sure exactly what happened. I was using the tablet and all of a sudden the bottom three buttons disappeared as well as the top bar. The system kept getting force closes. I rebooted and it just sat in the reboot mode. I tried to recover from the system but that is not working. I cant seem to get the system to mount via usb now. I am in clockwork mod v5.8.0.2 and do not see an option. If I could mount it I could put an img file back on and get it to work. Any help would be great.
xndrxw said:
Not sure exactly what happened. I was using the tablet and all of a sudden the bottom three buttons disappeared as well as the top bar. The system kept getting force closes. I rebooted and it just sat in the reboot mode. I tried to recover from the system but that is not working. I cant seem to get the system to mount via usb now. I am in clockwork mod v5.8.0.2 and do not see an option. If I could mount it I could put an img file back on and get it to work. Any help would be great.
Click to expand...
Click to collapse
You could try to flash back the stock software to see if that helps? Look here for some help.
Are you running a custom ROM or anything else? ALSO, once you do manage to get everything fixed, I would upgrade your CWM to the most current version 6.0.1.0 by flashing this in the older (5.8.0.2) version.
Sounds like it might be permission related, you could try a 'fix permissions' in recovery
Sent from my GT-I9300 using Tapatalk 2
Permissions did not fix it. I am trying to figure out the ADB.
xndrxw said:
Permissions did not fix it. I am trying to figure out the ADB.
Click to expand...
Click to collapse
Just do a bunch of reading! We were all noobs once
I keep getting the message "error: cannot load 'bootloader-grouper-3.34.img' . It seems like something is wrong with the file. Is there a way I could just flash another Rom on this way or even update the clockwork mod using adb?
xndrxw said:
I keep getting the message "error: cannot load 'bootloader-grouper-3.34.img' . It seems like something is wrong with the file. Is there a way I could just flash another Rom on this way or even update the clockwork mod using adb?
Click to expand...
Click to collapse
Did you download the nakasi file from the google site? You shouldn't have an issue with that. And you can update CWM using ADB, just check over in the Android Development section.
A lot of people have been having problems with the nexus 7, best bet is return it and get a new one
Sent from my Galaxy Nexus using xda app-developers app
Finally got it working. Now just need to install the new clockwork mod and move this thing to the GlazedJellyBean rom.
Boooty said:
A lot of people have been having problems with the nexus 7, best bet is return it and get a new one
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
This is seriously not the advice to be giving out on the forums for a minor software issue on an unlocked and rooted tablet especially.
Boooty said:
A lot of people have been having problems with the nexus 7, best bet is return it and get a new one
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Worst advice i've heard, ever.
Sooo true.. You root/ unlock its yours NOT GOOGLES TO REPLACE
CharliesTheMan said:
This is seriously not the advice to be giving out on the forums for a minor software issue on an unlocked and rooted tablet especially.
Click to expand...
Click to collapse
similar issue with TWRP.. I did temp root thru nexus root/recovery app (thanks dev) Then pushed cwm recovery to data/media.. Booted back into temp cwm from above and flashed up to date cwm.. will stick with cwm for now..
good luck OP .
xndrxw said:
Finally got it working. Now just need to install the new clockwork mod and move this thing to the GlazedJellyBean rom.
Click to expand...
Click to collapse
i'm having the same issue. how did you finally get it to work? i've redownloaded the file a bajillion times and still nothing. HELP
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
If I were you I would go back and read a little information about mf3 and what kind of recovery can be used. It sounds to me like you might be very confused. In order to correctly keep from bricking your phone you may want to read up on things. Good luck.
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Since you are rooted, take a look in the /cache/recovery directory. Read the log file. It will tell you where things messed up.
For example, I had forgotten that I did something with csc and had replaced the feature.xml file. Luckily, I had a back up of the original file. I renamed it, fixed is file permissions to rw-r--r--, advanced my clock one day, and then was able to install MJ9.
Good luck, and remember you won't have root anymore when you install this (for the time being)
Yrs,
dkephart
Sent from my SAMSUNG-SGH-I337 using Tapatalk
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems
To able to keep your root and upgrade from 4.2.2 to 4.3 you have to change your param file back to the stock. Thats all the information that I have so far so... not completely sure. But I think that is what you're supposed to do.
Because you have a custom param file, when you try to upgrade to 4.3 it's telling you there is an issue with your phone.
I may be wrong.
Is there a copy of the correct feature.xml? Im having the same issue
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
According to the log its stopping when it can't find the chat on apk. I did remove it using titanium.
Will restore it try again andbipdate the thread. Thanks for pointing out the correct log file to look at.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I checked again and found my backup feature.xml. Typed this from mj9.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I had the same problem happen to me on Wednesday night and last night. Today I used Odin to go back to stock MF3, however, then I couldn't get the OTA update. It kept saying my firmware was up to date each of the three times I restored it.
Now I'm finally on MJ9 after copying "update-mf3-mj9.zip" to my SD card, going into recovery mode, and updating from external SD card. Now I can use my Galaxy Gear!
Cause I want to sound like a noob.
How did you install CWM on what reads to me a MF3 S4.
Those on MF3 have been using Safestrap cause CWM hasn't been possible.
Sent from my ATT S4 MF3 using Tapatalk
jball said:
Cause I want to sound like a noob.
How did you install CWM on what reads to me a MF3 S4.
Those on MF3 have been using Safestrap cause CWM hasn't been possible.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
I was excited when I rooted the phone, then installed ROM manager premium. It allowed me to install the recovery. You can even boot into the recovery from ROM Manager.
However since the S4 is locked down tight, you can do any thing from there. So i can't flash anything. It even gives me a message saying as much.
However it is partially installed I can boot into it at will.
I will post a video of it. So that you all have an idea of what im talking about.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Don't waste your time with a video,its your stock recovery.your not the first to have done this.lets jump ahead a bit and just install Safestrap.whats Safestrap you might ask?search for it and READ please sir.
Sent from my ATT S4 MF3 using Tapatalk
jball said:
Don't waste your time with a video,its your stock recovery.your not the first to have done this.lets jump ahead a bit and just install Safestrap.whats Safestrap you might ask?search for it and READ please sir.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
While I was preparing to record it, I did notice that you are correct. Although Rom Manager goes through the motions of flashing the recovery, when you attempt to boot into the Recovery, you are faced with an Error, and default back into Android Recovery.
Although I know all about Safestrap...I think we've all missed the point. The OP was meant to get help about why the 4.3 OTA was failing 25% into the install.
I've got what I needed by being pointed to the location of the install log.....and while reading through it, I noticed that the install is failing because I removed the Chat On APK. I will install from backup and move forward.
Thank you all who provided the necessary guidance to solve the original problem.
Thank you as well to those who helped clear up the whole Clockwork vs Android recovery part. Although a minor part of the original post, it's good that we don't spread misinformation.
Cheers
ckalantzis said:
While I was preparing to record it, I did notice that you are correct. Although Rom Manager goes through the motions of flashing the recovery, when you attempt to boot into the Recovery, you are faced with an Error, and default back into Android Recovery.
Although I know all about Safestrap...I think we've all missed the point. The OP was meant to get help about why the 4.3 OTA was failing 25% into the install.
I've got what I needed by being pointed to the location of the install log.....and while reading through it, I noticed that the install is failing because I removed the Chat On APK. I will install from backup and move forward.
Thank you all who provided the necessary guidance to solve the original problem.
Thank you as well to those who helped clear up the whole Clockwork vs Android recovery part. Although a minor part of the original post, it's good that we don't spread misinformation.
Cheers
Click to expand...
Click to collapse
You handled this all very well.
ITNV said:
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems
Click to expand...
Click to collapse
Did you use all files? I mean, I've been trying the same for the past couple of days, and I even asked in that thread if I could use just the PDA file, nobody replied so I went ahead and did it, it removed the root and I kept all my files and settings (That was the idea) but just after that I can't connect anymore to Kies ( I could without issues, I did a full backup moments before) and trying to do the sideload it always gives me the Error 7, I even tried the full SD card update,it erased everything and guess what, when it rebooted for my surprise I was still at 4.2.2 MF3, so it just did the Wipe Data and then rebooted, so I lost almost 6 hours getting everything back as it was and then, I had the Damaged SD card error so I also lost all my pictures and videos withoout back up.
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
erasat said:
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
Click to expand...
Click to collapse
Yes. I used all the files. The result was a completely stock unrooted 4.2.2 so, yes, it reset the phone and erased everything that I had on there. (It left my external SD card intact but I would still advise removing it if there is anything on there you don't want to lose.)
ITNV said:
Yes. I used all the files. The result was a completely stock unrooted 4.2.2 so, yes, it reset the phone and erased everything that I had on there. (It left my external SD card intact but I would still advise removing it if there is anything on there you don't want to lose.)
Click to expand...
Click to collapse
Yep, that was the reason why I just used the PDA I didn't want to lose my data, and then I did it anyways, my mistake was not doing the Odin Restore just after I realized that it erased everything and I was still at 4.2.2, that's was the perfect time to do it, but now, after I finally put everything back as it was, I simply don't see myself by my own choice, doing all this again.
Thanks.
erasat said:
Did you use all files? I mean, I've been trying the same for the past couple of days, and I even asked in that thread if I could use just the PDA file, nobody replied so I went a head and did it, it removed the root and I kept all my files and settings (That was the idea) but just after that I can't connect anymore to Kies ( I could without issues, I did a full backup moments before) and trying to do the sideload it always gives me the Error 7, I even tried the full SD card update,it erased everything and guess what, when it rebooted for my surprise I was still at 4.2.2 MF3, so it just did the Wipe Data and then rebooted, so I lost almost 6 hours getting everything back as it was and then, I had the Damaged SD card error so I also lost all my pictures and videos withoout back up.
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
Click to expand...
Click to collapse
It was mentioned several times in that thread exactly what files to use and how to use them. There were also several pictures provided that showed EXACTLY what the ODIN screen should look like before the flash.
scott14719 said:
It was mentioned several times in that thread exactly what files to use and how to use them. There were also several pictures provided that showed EXACTLY what the ODIN screen should look like before the flash.
Click to expand...
Click to collapse
In the thread, there are tons of instances where it explains where to use each file and even pictures, I know because I read every single post, but none of them explains if I could use just the PDA one if I wanted to keep my settings while unrooting the phone, that's why I asked about it, because nobody replied to my question I decided to be the guinea pig, and yes, it works, you keep your settings, and I was glad, but as you can see, what I wanted to accomplish didn't work after all. Without all the files it doesn't fix the issue that causes the error 7 when doing the sideload.
help with mf3 to mj9
Having the same issue and formatted card with backup image.
Update got to 23 % and failed
now phone refuses to flash in odin.....and im missing factory apps preventing me from doing anything to get it back to stock
anyone have a stock restore image I could use in kies?
Would that work properly?
Hi, I was hoping to get some help and insight with the situation I've been dealing with. I'll give as much information as possible so that someone might be able to point me in the right direction.
I have an att galaxy s4 that was purchased and rooted before the mf3 ota that made everything so difficult. I've flashed several roms and decided to go with liquidsmooth 2.37 atm and I'm experiencing a few odd issues (stock mss not working) that no one else seems to have, but for the most part it's running very well. Lately I've wanted to go with a rom using the new 4.4 and I've tried a handful no matter what rom I try I have the same issues. so far I've tried CM 11, Omnirom and Gummy. With all of them everything runs very laggy and glitchy and will frequently freeze until it crashes and reboots. Every single time I've used whatever gapps are linked in the op for every rom and followed flashing instructions to the letter (wipe data/factory reset, wipe cache, wipe dalvik, flash rom , flash gapps, flash super su (if needed) and reboot) and I've even tried different recoveries (both cwm recovery 6.0.4.4 and the latest philz cwm recovery) same results every time. This part shouldn't matter, but I tried flashing these roms while on the original mdl modem and after upgrading to mj9. Let me know any other info you need, but I've tried to be thorough. I appreciate the help.
So what firmware are you on right now?
scott14719 said:
So what firmware are you on right now?
Click to expand...
Click to collapse
I'm guessing mdb
sorry thought i mentioned the firmware is mdl
Rockman195 said:
sorry thought i mentioned the firmware is mdl
Click to expand...
Click to collapse
Looks like you're doing everything right. Have you checked md5's of your downloads?
I don't know how to do that or else I would
Sent from my SGH-I337 using xda app-developers app
Rockman195 said:
I don't know how to do that or else I would
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
http://onlinemd5.com/
Thanks for the link. I'm looking into md5 checking and I downloaded the hash droid app. My only question is when I calculate the md5 of a file what am I supposed to compare it to?
Sent from my SGH-I337 using xda app-developers app
Rockman195 said:
Thanks for the link. I'm looking into md5 checking and I downloaded the hash droid app. My only question is when I calculate the md5 of a file what am I supposed to compare it to?
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
You should compare it to the md5 typically posted where you download the file from
Ok so the dl site like devhost or whatever
Sent from my SGH-I337 using xda app-developers app
Rockman195 said:
Ok so the dl site like devhost or whatever
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Correct. I usually just compare the last 5 or 6 characters. If they match it's very unlikely the others won't too.
tried going back and looking in all the threads that I downloaded roms from, can't find md5s for any of them with one exception and thats an outdated version of a rom I'm not currently trying to flash, so I don't see the point in downloading it just to compare the md5
Downloaded an omnirom build and checked the md5 and everything was good, plus I would be surprised if the md5s were bad on all the roms I've tried. Any other suggestions? Should I try two recovery instead of coming?
Sent from my SGH-I337 using xda app-developers app
Rockman195 said:
Downloaded an omnirom build and checked the md5 and everything was good, plus I would be surprised if the md5s were bad on all the roms I've tried. Any other suggestions? Should I try two recovery instead of coming?
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I'm running out of ideas try twrp recovery. Here is a zip you can flash in your current recovery http://forum.xda-developers.com/showthread.php?p=45511518
flashed twrp and that royally screwed up the phone. opened recovery using twrp and made a back up then did a system wipe and went to install the rom and when I went to do that, the list of all teh files you have to choose from was blank. I could go through different folder levels but the part where it shows the contents was always emtpy. Sometimes I could touch the area and see I portion highlight like it was making a selection but it wouldnt do anything and there was no file name there. Went to restore the backup I made and there was nothing in the list of backups to restore from. Rebooted the phone and liquid smooth 2.37 loaded like a clean flash with none of my info, files, apps, etc so I downloaded rom manger from the playstore and put the latest cwm touch on there. When I went in recovery none of my cwm backups where there or anything so i went to reboot and it only shows the samsung boot screen. Downloaded a few different roms and gapps on my sd card from y computer and put them on the phone and flashed the roms and gapps and still can't get past the boot screen. I'm really open to suggestions on this one.
If it was me, at this point I'd Odin the stock mdl firmware and start all over again. Something's not right with your phone. But it scares me a little since things aren't flashing correctly and there could be something wrong with your internal memory. If memory is bad it could make things worse.
I think your right. Do you know where I can find the stock firmware and instructions for flashing it? I haven't used Odin in a while.
Sent from my GT-N8013 using xda app-developers app
Rockman195 said:
I think your right. Do you know where I can find the stock firmware and instructions for flashing it? I haven't used Odin in a while.
Sent from my GT-N8013 using xda app-developers app
Click to expand...
Click to collapse
You can get the stock firmware at sammobile.com. it's free but you have to register. You'll download a zip file. Use 7-zip to extract the .tar.md5 file from it and use that in Odin, PDA slot. This is a guide that is not for the s4 but the procedure is the same. It has screen shots in it that help. Don't use any files in it though other than odin. Good luck. http://forum.xda-developers.com/showthread.php?p=26056924
I haven't read the whole thread, so hopefully these haven't already been covered.
1) Make sure your recovery supports 4.4. Not all of them do. Stay the heck away from TWRP because it's done nothing but suck for Galaxy S4, while it was absolute king for the S3. The wrong recovery can still flash a ROM but that ROM may not work very well.
2) Ensure you do a COMPLETE wipe. As in wipe /system and /data. Make sure your internal SD card is formatted. 4.4 may not use some things & folders that 4.2 and 4.3 did, which might cause problems.
3) If you have an external SD, then make sure 4.4 is using the right path for it to access any important files you may have on it, like apps2sd & such.
Well since screwing things up with twrp I'm back to having a working phone again. I didn't have to use Odin but I still might just to go back to stock and then try kit kat. I went into cwm recovery and formatted the system then flashed liquidsmooth 2.37 which is what I was running. Everything works fine with that except when I use the rom manager widget to boot into recovery, it goes to the boot screen with booting recovery at the top but doesn't go further. I have to use the 3 button method to get into recovery. The other odd thing is that mms works for me now.
I tried flashing gummy 4.4 again since everything is fine in jb but I still have the same jittery twitchiness. One thing I noticed is that when I go into the performance settings in 4.4 the current cpu reading will jump from 300 mhz to 1200 to 400 to 1800 etc just at idle. Is that normal. My note 10.1 holds steady when it's just sitting there.
To answer your questions, I'm using cwm 6.0.4.4 which is kit kat approved and I formatted and wiped everything before flashing and it didn't change anything. I appreciate your help so far and look forward to more insight.
Sent from my SGH-I337 using xda app-developers app
Hey guys I'm fairly new to the droid, but not new to installing stuff and that. I've tried multiple times to install a recovery but twrp doesn't, through fast boot it says it's invalid or something. Somehow I got cwm on it but to install a new Rom I've to make a complete backup since I've heard these phones brick pretty easily. The data can't be mounted to backup And I can't backup on internal storage either.
If you guys could help me out a bit it would be great. Thanks
Sent from my XT907 using XDA Free mobile app
jafferkhan said:
Hey guys I'm fairly new to the droid, but not new to installing stuff and that. I've tried multiple times to install a recovery but twrp doesn't, through fast boot it says it's invalid or something. Somehow I got cwm on it but to install a new Rom I've to make a complete backup since I've heard these phones brick pretty easily. The data can't be mounted to backup And I can't backup on internal storage either.
If you guys could help me out a bit it would be great. Thanks
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
Which system version are you on, and which version of TWRP did you try? Where did you get the TWRP? Check this thread it has all the walkthroughs and download links needed... Side note this should be in general or q&a not in the Dev section
We cannot teach people anything; we can only help them discover it within themselves.
I'm on the stock rom 4.4, and I've already gone through the steps, as I said and understand how these things work, the cwm I'm using now installed but doesn't allow for a data backup. I read there isn't one for this phone which allows that.
Sent from my XT907 using XDA Free mobile app
Which TWRP did you use... Where did you get it from.... Please check the linked thread and ensure you grabbed the proper TWRP for our device also maybe try flashing by a different method if you did use the correct TWRP
We cannot teach people anything; we can only help them discover it within themselves.
jafferkhan said:
I'm on the stock rom 4.4, and I've already gone through the steps, as I said and understand how these things work, the cwm I'm using now installed but doesn't allow for a data backup. I read there isn't one for this phone which allows that.
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
Actually I am also on 4.4 kk.. And also I tried a lot TWRP's they don't work! Idk why but just didn't open when click to recovery!
Also a lot of cwm's won't work. I only found one working recovery.
livecouk said:
Actually I am also on 4.4 kk.. And also I tried a lot TWRP's they don't work! Idk why but just didn't open when click to recovery!
Also a lot of cwm's won't work. I only found one working recovery.
Click to expand...
Click to collapse
i went through the suggested link again, decided to go with Twrp and used flashr from playstore to flash it. worked out great, now i've got a fully backed up stock 4.4
dbreezy187 said:
Which system version are you on, and which version of TWRP did you try? Where did you get the TWRP? Check this thread it has all the walkthroughs and download links needed... Side note this should be in general or q&a not in the Dev section
We cannot teach people anything; we can only help them discover it within themselves.
Click to expand...
Click to collapse
got it, thanks mate