Database Users

Updating to 2.3.4 firmware - if you don't want to root

HI
This is Just for People who want to flash 2.3.4 firmware or any other firmware but don't want to root their phones like me.
Again All Posts are within XDA and Due Thanks to the OP's and DEVS
I'll Try to be as informative and clear as possible ( Its more for the newbies )
First off all it has been stated this 2.3.4 is leaked and not official
So lets Begin
1. Install latest Kies of samsung > connect your phone and make sure all drivers are Installed and your phones is recognised in Kies > Backup if you wanna
2. Close Kies ( make sure its not running in the system tray) > Install ODIN
Get Odin v1.85 from here: http://www.multiupload.com/1RTGSE061G
Just extract Odin folder and keep the odin3.ini file in it.
How to USE ODIN in SECOND POST
3. Download your 2.3.4 Firmware ( or any other firmware you wish to flash)
a) Download Link Stock XXKG1 : http://www.multiupload.com/2EMBQMYF4V (via ficeto) or If you can find other links
and Extract It > you should have four files:
b) CODE_I9100XXKG1_CL349526_REV02_user_low_ship (goes into PDA section)
GT-I9100-CSC-MULTI-OXAKG1 (Goes into CSC section)
MODEM_I9100XXKG1_REV_02_CL1034110 (Goes into Phone section)
u1_02_20110310_emmc_EXT4.pit (not required)
4. Open ODIN and put the files in the respective TABS > Do not change (tick or untick any other boxes) read the second post by intratech
5. Put phone in Download Mode
a) DOWNLOAD MODE - Volume Down + Home Button + Power Button
b) Volume Up to get into Download Mode
c) Connect phone and wait till First Box in ODIN turns Green
d) Click Start and wait till phone flashes and Reboots automatically ( can take up to 15 mins)
e) Once phone reboots you are Done you can close ODIN
ORIGINAL POSTS, OFFICIAL FIRMWARES and CARRIER FIRMWARES HERE
Thanks to - INTRATECH,TANMAY,FICETO and the DEVS CONCERNED
PS : If I have missed out anything let me Know and I will update

INTRATECHS GUIDE TO FLASHING WITH ODIN - Scroll Down to see the screen shots in HIS POST
Flashing Firmware with Odin
1. Just download the firmware version you want from above and extract the .tar file in the archive and save it somewhere
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. Click on the PDA button and browse to the .tar file that you extracted in step 1
If the package has more than one .tar archive then they will be labelled with PDA, Phone/Modem and CSC. Just put them in the corresponding section of Odin
5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Anyone ask about .pit file is a moron
Should look like this screenshot
http://img153.imageshack.us/img153/5705/odinm.jpg
If the package has 3 files it should look like this:
http://img94.imageshack.us/img94/8290/odinxm.jpg
Regardless of firmware version it's still the same methodology
6. Connect the USB cable and wait for the ID:COM section to turn yellow
7. Click start to flash
8. Do not disconnect the cable or turn off the device, it will reboot when it finishes.
It will not wipe your phone if you flash as recommended

Will I loose all my data and programs?

let me be the first to thank you
i am coming from iphone4 so all these terms and apps are new to me, and while i can use the search function a lot of times it takes several pages of read-thru to piece together what you have put in 1 concise post
btw i love the SG2 and android platform, steve jobs can toss my salad

If you flash any 2.3.3 you don't seem to loose any data... but yeah updating to 2.3.4 you do loose data and programs.
I didn't have many programs, but market restored most of them from me, and good to backup first.
Also kies gives me that I can't update firmware maybe cause its the latest one and it don't recognise the firmware.
Please be aware this is a leaked version, so if you want you could wait for the official one, I so far had no problems whatsoever

Just one noob question, SII being my first android phone, i assume that in order not to lose warranty you still have to use USB jig to reset rom counter if something bad happens, right ?

Sp1tfire said:
Just one noob question, SII being my first android phone, i assume that in order not to lose warranty you still have to use USB jig to reset rom counter if something bad happens, right ?
Click to expand...
Click to collapse
Sorry I have no clue about that But I guess you could always flash the carrier branded firmware from INTRATECH's posts.. links in my first post as well.
I guess it only applies if you root your phone (I could be wrong).
Here is a link if its any good to you
[HOWTO] reset custom binary counter in download mode

obionenairobi said:
Will I loose all my data and programs?
Click to expand...
Click to collapse
With low packages you will so yes.
Good work tfn.

Intratech said:
With low packages you will so yes.
Good work tfn.
Click to expand...
Click to collapse
All thanks to you Mate , It mostly all leeched off your posts

Sp1tfire said:
Just one noob question, SII being my first android phone, i assume that in order not to lose warranty you still have to use USB jig to reset rom counter if something bad happens, right ?
Click to expand...
Click to collapse
If you are using stock kernel there is no counting in custom binary,so no problem with your warranty.You can check your counter if you go to download mode.By the way usb jig is always usefull.
Regards
Sent from my GT-I9100 using Tapatalk

afilopou said:
If you are using stock kernel there is no counting in custom binary,so no problem with your warranty.You can check your counter if you go to download mode.By the way usb jig is always usefull.
Regards
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks for the info

Is it possible to use another CSC from older stock releases together with this? ie, flashing this, and then after that flashing the multi CSC "MultiCSC OXXKF1" for instance? The reason im asking is that ppl have reported this rom to not include the nordic keyboard's for swype etc, and thats sort of a gamebreaker for me.

rulleeeee said:
Is it possible to use another CSC from older stock releases together with this? ie, flashing this, and then after that flashing the multi CSC "MultiCSC OXXKF1" for instance? The reason im asking is that ppl have reported this rom to not include the nordic keyboard's for swype etc, and thats sort of a gamebreaker for me.
Click to expand...
Click to collapse
I dont see any reason why not.
Sent from my GT-I9100 using Tapatalk

tried it, and it worked to install that CSC, but i thought the keyboard layouts were included in that but i was misstaken, guess ill go back to the KF3 nordic release, meh

password request
after i install it asks me to confirm password.i dont know anyone help me please

xboxfan said:
after i install it asks me to confirm password.i dont know anyone help me please
Click to expand...
Click to collapse
I believe it must be your samsung account password.. or unless you had a security lock password.. Try one of those

xboxfan said:
after i install it asks me to confirm password.i dont know anyone help me please
Click to expand...
Click to collapse
Whatever the pin unlock code that you use to unlock the device in the password that you need.

tfn said:
If you flash any 2.3.3 you don't seem to loose any data... but yeah updating to 2.3.4 you do loose data and programs.
I didn't have many programs, but market restored most of them from me, and good to backup first.
Also kies gives me that I can't update firmware maybe cause its the latest one and it don't recognise the firmware.
Please be aware this is a leaked version, so if you want you could wait for the official one, I so far had no problems whatsoever
Click to expand...
Click to collapse
tanx so much!!!..i`m downloading...keep it up bro

There is one thing I don't understand how to do. Before I flash my firmware with the new 2.3.4 version, I would like to take a copy of my existing firmware from my phone first and save it to my PC. So that I have the option of putting my phone back to how it was if for some reason I want to revert my phone. I understand that I would need to buy a jig to reset the update counter.
So is it possible to save my existing firmware to my PC first?
I did try looking at the download page but there were so many different countries and carrier versions that I found it confusing. I am stock KF3 uk unbranded O2 still running 2.3.3
Thanks

Thank you tfn. Great instructions, I am loving the new update.

[GUIDE] How to use Odin for GT-I9070

Odin is the saviour tool for all Samsung devices. The method for flashing by Odin differs from device to device.
This thread will give step by step instructions on how to flash a stock rom from Odin on the GT-I9070/p :
A. Download Odin tools from here : http://d-h.st/3zJ
Pass : shaaan
B. Download the stock rom from www.samfirmware.com
Setting up Odin :
1. Make sure you have installed the necessary drivers for this device. The drivers can be installed from within KIES or seperately. (I will upload the drivers shortly).
2. Run Odin as administrator.
3. Setting up the files is divided in two types depending on the firmware type :
a. If the firmware is a multi package file, put the files in the corresponding sections.
ie. CSC file in CSC section, PDA file in PDA section.
b. If the firmware is a single package, add the single file in the PDA section.
4. Now that Odin is setup, put the phone in download mode. To do that, power off the phone and press 'home+power+volume down' buttons together. Keep the buttons pressed till Download mide appears.
5. Now that Odin and the phone are setup, connect the phone to the device. Odin will detect the device and show something like 'com port (1)'
6. Flash the device.
7. The flash will take 5 minutes for a full flash on average.
8. When the flashing is complete, DO NOT remove the device until Odin shows ' PASS '.
9. The device will reboot. Remove the device, go to recovery mode and do a factory/data reset.
That's it. Happy flashing peeps..!!

Awesome guide mate - messing around with our device without Odin is risky !

This should be sticky. A lot of people is asking how to revert to original FW, or similiar questions that is connected to reverting. And it is almost at the end of forum, and thay cant see it.

I pmed the mods to do it. But they won't budge..
Please pm them..

Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium

Very good guide,good work !
It may be better if you add some images

atishey23 said:
Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.

th3cr0w said:
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.
Click to expand...
Click to collapse
It is normal to have 4GB on internall SD. The rest of it goes to system partition, application partition and RAM I think...

shut_down said:
It is normal to have 4GB on internal SD. The rest of it goes to system partition, application partition and RAM I think...
Click to expand...
Click to collapse
googled a bit more and found it out too :crying:
BTW - both of those 8GB .pit files are identical (according to 'comp' tool in windows) so there is no reason to use re-partition - other than sth went totally wrong and you are trying to recover from brick or sth serious as this .pit file is already on your device.
Just flashed unbranded stock for XEO region - original one was branded.
NOTE to anyone who is still thinking about safety of this method:
After initial reboot - when it was reconfiguring in recovery mode - or however you will call it (just before odin should say 'pass' - still in that little font screen) windows started to reinstall usb drivers - odin log in bottom corner said 'disconnected' and even then my newly flashed ROM is working as it should. I would rather keep it connected till Odin confirms all went as intended but in case of similar issue - do not get heart attack

odin is used for flashing stock roms only???

Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
nope it can also be used to flash custom Roms and kernels though flashing custom kernels via odin will increase your bin counter !

Hello guys...
How are you? I´m new on the i9070 threads!!! I´ve had others phones before, like SG2, xperia sola, live with walkman... so, i need the password to descompress odin... i search on thread but i don´t found it...
SORRY I found the password... shaaan

Of what I understand, can I test an unlimited number of stock firmware and the binary counter remain 0?
If I flash an unbranded firmware can I use SIM cards from other providers?
Now my phone is branded and I can not use SIM cards from other providers.
Thanks.

Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
Read please, sir!
http://forum.xda-developers.com/showthread.php?t=1985199
:laugh:

Someone help me? LINK

Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???

sonimayurp said:
Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???
Click to expand...
Click to collapse
Try to remove .md5 from filename.

shut_down said:
Try to remove .md5 from filename.
Click to expand...
Click to collapse
Hmm it worked thx..

Flash JB
Hi, I want to flash Jelly Bean , do i need to use the pit file , or just select one package and then select the rom??
Edit : flashed

This version of Odin does not work when flashing JB to my device.
I successfully used Odin3v3.07 from this post: http://forum.xda-developers.com/showthread.php?t=2086965
Please update this guide. I spent quite a lot of time trying to figure out what was wrong.
Thanks

Samsung Galaxy Y Wont turn on problem help asap

Samsung Galaxy Y, Idk what problem I have but im really confused now withh all the non sense. Idk if its looping or not cus sometimes it boots. then after a few minutes turns off again. I can go to Volume up+ home button + lock button then i tried the system recovery. it worked but then it booted up then after a few minutes same problem. Now it turns on and off and whatever. I tried the odin stuff. I downloaded usb drives then odin and the md5 thing. I tried first. it didnt show ready on the odin while i was on download. then next it showed a blue thing so i thought it was ready. I clicked the PDA with md5 in it. then clicked start. but it said FAILED. now idk what to do.
what else can I do and can someone pleaseee explain it step by step. thank you

Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file

marcussmith2626 said:
Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file
Click to expand...
Click to collapse
what is csc file and modem. I only have pda file named recovery.tar.md5

MeetJunx said:
what is csc file and modem. I only have pda file named recovery.tar.md5
Click to expand...
Click to collapse
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers

his rponele
marcussmith2626 said:
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers
Click to expand...
Click to collapse
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you

MeetJunx said:
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you
Click to expand...
Click to collapse
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is

marcussmith2626 said:
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is
Click to expand...
Click to collapse
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?

already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too

MeetJunx said:
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?
Click to expand...
Click to collapse
It will turn off normally - leave it don't interrupt it or try another firmware

akosicarlo said:
already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too
Click to expand...
Click to collapse
hey, Idk what flash or stock rom is. but im googling it right now. and im looking at a video. will this solve my problem with it turning off?

yeah ....
flash stock rom thru odin
note: after the process had been complete it will AUTO REBOOT (dont do anything on the phone) unless it already boot up

[Q] Odin Error

i used the exe og legija to recover my i9505 so i can boot in download mode but
when i install an official firmware with pit thru odin after the flash is pass success the i9505 is dead again ...
any idea?? In the phone when start flashing is appear 3 lines in red saying:
START [240,1440]
BAR [240,1440]
END [240,1440]
any help plz thx

You are in the wrong forum. This one is for the S4 Active and its European counterpart. Sounds like you have a regular S4 as we cannot yet flash ROMs on our S4 Active phones.

No , you're in the wrong forum dude
Sent from my GT-I9505 using XDA Premium HD app

Miami_Son said:
You are in the wrong forum. This one is for the S4 Active and its European counterpart. Sounds like you have a regular S4 as we cannot yet flash ROMs on our S4 Active phones.
Click to expand...
Click to collapse
I'm pretty sure this is the regular S4 section
Sent from my Googley Sammy Jellybean

tatperson said:
I'm pretty sure this is the regular S4 section
Sent from my Googley Sammy Jellybean
Click to expand...
Click to collapse
It is, now that a mod moved the thread.

yes is an european s4 i9505
yes i am from spain this s4 i9505 is european version, from vodafone, in odin when i start download mode it says wrie protection enable and when flashing it sen the messages i say above. i use the pit and the stock fw, in odin it says it pass and all succesfull but when i try to power the phone it dont boot, and goes in qualcom mode. also when i enter in download mode at star says phone coud not do normal bot in red, like that:
could not do normal boot
odin mode
product name : i9505
Current binary sumsung oficial
System status: Custom
CSB-OEM_CONFIG _FILES_SYS: 0x30
write protection : enable

We need to know exactly what you've done to the phone in the order you've done it - firmware which was originally on the phone, any OTA updates, exactly what you flashed/in what order, what happened to the phone that made you need to Odin flash it.
Little details will be important so far as getting your phone up & running as soon as possible goes, I.E the less details you give the longer it's going to take for that to happen

MistahBungle said:
We need to know exactly what you've done to the phone in the order you've done it - firmware which was originally on the phone, any OTA updates, exactly what you flashed/in what order, what happened to the phone that made you need to Odin flash it.
Little details will be important so far as getting your phone up & running as soon as possible goes, I.E the less details you give the longer it's going to take for that to happen
Click to expand...
Click to collapse
hi, is a friend phone, he flashes with odin to install 4.3 custom(i don't know what custom he use) it fails and he brick the phone, can't no enter in recovery and can't enter in download mode, also the phone no power on, when he let me the phone for repair. Know i can enter in download mode.
First of all i try to flash a new rom custom but it says no pit partition. Then i download from sammobile a stock rom of vodafone and the pit file for the S4 i9505, i flash it with pit and the stock official rom of the terminal (re-partition mark,f.reset time mark, and autoreebot mark). Odin end and say pass. but when i try to power on the phone go again into a brick (phone, can't no enter in recovery and can't enter in download mode, also the phone no power on). i use odin 3.07 , 3.09 and 1.85 i got this versions and i try some configurations like unmark re-partition,and unmark autoreboot with the same problem. (He turn un qualcome mode). i also try to install a new recovery and the same syntoms. also when i flash any thing the phone goes to the same status all ok but no power on, no recovery and no download mode.

any ideas???

Where to start ?....soft bricked S4.... unknow delaer/firmware :-[

Hi folks!!!
I know is very annoying this question....
But already look in a lot of forums in XDA, but without luck....
So I first start with my background about restoring and flashing devices.....
MY first flashing device was a Galaxy S1 with Cyanogenmod.
Later a flash 1 Galaxy Young, and after I fixed a different and default random soft bricked Galaxy Young.
My last flashed device was a S5 with LineageOS 3/4 months ago....
Im did so installing CWM when was possible, using Odin , or ADB....from Linux and W$.....
Until I get lost my last phone Galaxy S5...
So I had to buy a 2° hand phone quickly....he was working OK... for a while ....the time has passed and become more and more slowly....so I decided to make a reset factory .......very BAD IDEA... I didn't take build information....just the model...GT-I9500....
The same info appears in the Odin download Mode....
But there is no tag with SN, and IMEI neither on the back... :'-(
So I get stuck in the Download mode ...but there IS NOT TAG about ODIN mode in this screen.....at least if
unplug the battery, and restart the phone holding PWR+HOME+VOL. DOWN .
[ EDIT ]
Trying to flash stock firmware with Kies ( who request a valid SN, what I take from web ) in the next models
GT-I9505
GT-I9500
give me this message ( in spanish =) ) ==> "este modelo no admite la inicializaciòn" , which means " this model cannot be initialized" .
[ end EDIT ]
I also tried smash (softly...covering with a canvas ) the power button...but without luck...
Seems like the phone is factory locked..... what I had read may be by AT&T or Verizon....any way to know which dealer?
Any idea or recomendation where to start ???
Its ( maybe ) JTAG cable the ONLY way/solution to fix this, or even this is NOT a solution...?
I will waiting for your answers....
TIA
PS: sorry if I made some mistakes with the english

Odin doesn't recognize the phone?

Rhoban said:
Odin doesn't recognize the phone?
Click to expand...
Click to collapse
Hello Rhoban, and thanks for your reply!!!!
and YES, Odin recognize the phone, the flash result is PASS, but the phone continues stucked on the same "Download" screen...
Because I dont have SN and IMEI neither, I dont know which ROM to flash..
After tryed to reset factory whithout luck, I tried to flash lineage, without any result.
Also because I cant unlock bootloader, I supposed to the phone was from Verizon or AT&T.
I tried to flash this ROMS's , setting the image on AP field from Odin
Verizon
I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5
I545VRUDMI1_I545VZWDMI1_I545VRUDMI1_HOME.tar.md5
From doidview ==> I545VRUGOC1_I545VZWGOC1_I545VRUGOC1_HOME.tar.md5
also i tried to flash the next PIT files and same result...nothing changed
SCH-I545.pit
SGS-I337_16GB.pit
adonis.pit
an this bootchain and bootloaders setting up on BL tab:
I545_OC1_Stock_Kernel.tar.md5
NB1-Boot.tar.md5
VRALEC.bootchain.tar.md5
From droidviews.com ==>
I545_NC5_Stock_Kernel.tar.md5
I545_NG6_Stock_Kernel.tar.md5
I know all above is a mess , but the list is the most detailed I can :silly:
thanks again!!!!
PS: I want to put the source link where I take the kernel images and ROM's , but because I'm newbie
( --- ALL new users prevented from posting outside links in their messages. ----), I can't

X00D45 said:
Hello Rhoban, and thanks for your reply!!!!
and YES, Odin recognize the phone, the flash result is PASS, but the phone continues stucked on the same "Download" screen...
Because I dont have SN and IMEI neither, I dont know which ROM to flash.
Click to expand...
Click to collapse
Hi, the same download screen before you started flashing? Do you have "no reboot" ticked? (Heimdall user sorry) After pass just restart the phone and wait 10 min or so.
Also because I cant unlock bootloader, I supposed to the phone was from Verizon or AT&T.
Click to expand...
Click to collapse
Never read into this, but resources are there( Seen some topic titles), there is hope for Verizon and AT&T users.
also i tried to flash the next PIT files and same result...nothing changed
SCH-I545.pit
SGS-I337_16GB.pit
adonis.pit
Click to expand...
Click to collapse
Did you have a backup? Flashing the wrong pit file might hardbrick your phone. I guess the above where blocked bij Odin (Lucky you).
In short:
Connect your phone in download mode> open Odin> click PDA or AP > Select the stock firmware > start.

You mentioned your device being a GT-I9500, but the ROMs you said you have downloaded are for I545 and I337, both of which are Snapdragon models. The GT-I9500 is the Exynos model.
So that may be your problem.

Thanks LexHimself for your advices! I had backed up already the contacts and pics.
and thanks Rhoban ....for you suggest I have to start again from the beggining, looking for the rigth ROM for my device... so thanks for put spot on the processor model !!!!
So I gonna start again, looking for the right ROMS...
I will post as soon has news about flashing Exynos rom´s....
thanks guys!!!

[SOLVED] !!!!
Hello guys!!!!
As Rhoban point me, I have to look for the right recover image ,and ROM for my phone GT-I9500, with Exynos processor, who has code JA3G, so with that code I can address well .
So I download this recovery image "philz_touch_6.12.8-i9500.tar.md5", and after install, I download and install the right LineageOS ROM for my system.....
but this would not have happened, if I would started for look for the processor model as FIRST STEP...
so THANKS SO MUCH RHOBAN, and thanks LexHimself for your advices!!!!
??????
Cheers!!!!