Hi all.
I've rooted my phone and now want to install another ROM on it but am unsure as to what is safe to use. I have attached a screen shot showing the hardware specs of my phone. What confuses me is that the processor is different to some of the others used in the I9505. Am I ok to use something like the cyanogen mod for the i9505 LTE?
My recovery menu is also different to what I have found in flashing guides. I have attached the pic with that as well.
Any help that anyone can give would be greatly appreciated.
Thanks in advance,
Dean.
Anyone at all?
I'm new here so don't fully take my word for it...
But your specs seem normal. I have the same processor, and had the same stock recovery menu as you. Idk about cyanogen mod but I've flashed several TW based roms built for the i9505 and it's been fine. I'm pretty sure you'd be sweet using something made for the i9505.
Hello,
I flashed a 4.4.4 KitKat ROM (Google Play Edition) on my phone and it comes with a custom kernel and the touch screen doesn't respond to touch after flashing it. If I change the ROM back to the previous ROM I had then it works fine but that's not the point. If I flash any custom kernel then my Galaxy S4 GT-I9505 touch screen stops working until I restore the stock kernel.
Is there a way around this or a fix for this because I'm finding it very difficult to find anyone else having this problem. I've done quite a bit of searching and so far nothing is similar to what I have. I'd like the use this ROM because it's much better than the other GPE ROM I'm currently using, but if I can't use the touch screen it's not worth it really.
This ROM is designed for the GT-I9505 and that, if I haven't already mentioned, is the device I'm using.
Any suggestions?
Thanks in advance.
Hello to all,
First of all ,question .
The stock firmware of Samsung in 4.4.2 is a TouchWiz if i am not mistaken ?
If yes, let's go forward.
I have tried CyanogenMOD ,and some other ROMs,but i didn't like anything like the stock one. I just need the stock one without the bloat apps that has the company.
So i have find out with help the Google Play 5.0 ROM ,i really liked it,even though it's a bit different rather than the 4.4.2 but the 2 problems that i am having and if i can solve them i will keep the ROM is.
1. I want the keyboard of 4.4.2 into 5.0 . Why ? The reason is ,because first of all above the keyboard i had the numbers already installed, and the second reason is when you type in Greek "Good Morning" = Καλημέρα you need a tone in the letter έ WHICH it cannot be provided via 5.0 keyboard.
2.You don't have any program inside,which on 1 hand is good but on the other hand is a little bit tricky to find the "gapps" that you need like Maps.
3.The icons are PRETTY BIG on the start screen.
So any help ?
Thank you all.
Dear Community,
I hope that this is the right place to post and any of you can help me.
My (aktual) Hardware/Software bits:
Galaxy Note 3 (SM-N9005)
Android: 5.1.1
Baseband-Version: N9005XXUGBOD3
Kernel-Version 3.4.108-f2fs-temasek-cm12.1-hlte-v1.25+
temaseksnappy #1
Temasek unofficial version V16.4
Build: LMY48J test-keys
Recovery: twrp 2.8.7.0-hlte-4.4
My actual problem is the following: My Note 3 by default had a 4.4.2 OFW on it, which I early upgraded to Lolipop 5.0.1. Everything works for the OFW 4.4.2 and 5.0.1 fine. As soon as I try to flash it with a CFW like CM11, CM12, CM12.1, CM12.1 (temaseksnappy), Gummy 4.4.4 I am losing the feature of auto rotation.
Of cource I did a clean flash, wiping DALVIK/CACHE/DATA and system, double time even one befor the flash, one after.
I also tried to put the battery, sim and sd out for few min before rebooting, while autorotation is manualy turned off.
Even a MODEM I flushed to fix this issue, but without success. Nothing helps but going back to OFW.
My last try was downgrading to the original 4.4.2, including baseband trieing from there to go to any CFW (CM11) as well as from OFW 4.4.2 -> OFW 5.0.1 -> CFW 5.1.1 (http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375)
There was also a post about a possible missing or broken lib in /system/lib which I replaced
Nothing helps (libGNU... something). This helped me alreay once in OFW after kicking out all the junk apps, but this is a different storry and not related anyhow.
Is there anybody out there who has the same problem or even better knows a solution?
My shot would be that:
1) CM has a problem with my particular hard-/software (Kernel, Baseband, Recovery, whatever) as I just tied CM or at least CM based CFWs.
PLEASE HELP.
Thank you very much in advance.
After about almost a year I cam back, giving again a try to CM, However I still have the same issue. Finally Anybody please!
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Rosli59564 said:
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Click to expand...
Click to collapse
Hello,
Thx for your reply. Right now I am on CM13 (temasek hlte v9.6)
http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375
This might should be specially compiled for sm-n9005 like mine.
Everything expect rotation works fine. However The accelleration is also working fine as I tested with "sensor test". Even the integrated camera App is rotating, however the rest is not.
In addition I downloaded "adaptive rotationfree", If I set it "stock Auto" nothing happens, but if I set it to "force auto" the rotation will work exacly once and then stops undtil I force it to portrait again.
What do you mean exactly with "touchwiz"? Is this jus a different kernel or a whole CFW?
As I wrote in the frist post I tried already a lot of CFW and ALL had this issue, but the OFW ;(
What shell I flush to get this working, which is not OFW?
BIG THX for YOUR HELP
Touchwizz is the firmware that comes with the stock Samsung firmware .
Also in custom Samsung based roms .
Hello,
thx for the tip with TouchWiz vs aosp. At the moment I am running "DarkLord N5 Release Candidate 2.12" which can get find here: http://forum.xda-developers.com/galaxy-note-3/development/rom-darklord-s6-port-alpha-t3083087
This Rom is TouchWiz Based and guess what ....
Autorotation works.
However I do not understand what the problem realy is and would prefer to run cm13 insteat. I mean even samsung devices got a accellerator within which works also fine with AOSP software, showing numbers moving while turning the phone. In addition for example on the post http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375 it is said that this is explicite for note 3 including the model n9005. So ...
Can anybody point me to the problem or even better to the fix?
Is there any chance CM would fix this?
Regards
I recently changed my ROM from stock 5.0.2 Lollipop to Cyanogenmod 13 6.0.1 Marshmallow on my Samsung Galaxy A5 (SM-A500FU)
I soon realized that my S-view cover doesn't fill any function anymore.
I really miss when the screen automaticly turns on and off when opening/closing the case.
I tried installing Hall Monitor by Durka, (suppose that it's for the s4 but it was worth a try) but it works Terrible.
I couldn't find any settings for the cover in the Screen settings as in Cm12.1
So does anyone know anything that can help me get the screen on/off feature back?
No, it needs the stock rom to work. It's based within the TW files itself so will never work on any other rom