Database Users

Broken touch screen, need to get Stock

The touchscreen on my Fire stopped working today. I already talked to Amazon and am getting a replacement, but I want to revert back to stock before sending it in. I've seen ways to do this with TWRP, but I don't have a touchscreen to use TWRP, or any recovery for that matter, with.
Is there any way to do this?
I do have full ADB and Fastboot access, with FireFireFire working, but do not have a currently working rom installed (I was on CM9, and it won't go past the boot screen).

drk.hd said:
The touchscreen on my Fire stopped working today. I already talked to Amazon and am getting a replacement, but I want to revert back to stock before sending it in. I've seen ways to do this with TWRP, but I don't have a touchscreen to use TWRP, or any recovery for that matter, with.
Is there any way to do this?
I do have full ADB and Fastboot access, with FireFireFire working, but do not have a currently working rom installed (I was on CM9, and it won't go past the boot screen).
Click to expand...
Click to collapse
There is a way to do this with adb... I just do not know the proper commands. Sorry

Does installing a custom rom void the warranty? Seems like it would be BS for Amazon not to honor it when it's apparently a hardware related issue.

sengwall said:
Does installing a custom rom void the warranty? Seems like it would be BS for Amazon not to honor it when it's apparently a hardware related issue.
Click to expand...
Click to collapse
No, I don't think it does, but I'd rather not take the chance.

drk.hd said:
No, I don't think it does, but I'd rather not take the chance.
Click to expand...
Click to collapse
YES! It absolutely does. The second the device was rooted it broke warranty.
Sent from my myTouch_4G_Slide using XDA App

The same thing actually happened to me earlier today. I was just browsing some sites on the ICS rom when it just stopped responding. I couldn't get it to recognize any touches even after a bunch of reboots, so I just figured it to be some bug that hadn't been squashed yet. When I dropped down to recovery and saw the same issue, I knew I had a real problem.
Hoping against hope, I tried both CWMR and TWRP on it and got no results. Like you, I figured it would have to go back to Amazon, so I started searching for a way to get it back to stock... nothing obvious jumped out at me because everything is written with access to recovery in mind... which doesn't help.
So, I started reading about adb and going through the built-in help. As I was familiarizing myself with some basic adb commands and options, I left TWRP open in front of me. I don't know how long I had it that way when I mindlessly tapped on the screen and thought I saw it flicker. Yes! I had pressed the Wipe button and it had taken me to that section. It's been working fine ever since.
I'm not claiming I did anything and I don't have a how-to on how to fix it, but it couldn't hurt to just leave the thing running in recovery for a while and see if the touchscreen comes back to life for you too.
Still, I'd love to see someone with more adb knowledge provide a simple tutorial on how to get it back to stock without access to recovery. I'm sure it would be helpful to someone in the future... maybe even me if the same problem comes up again.
Best of luck to you.

Just ignore my comment
Sent from my Amazon Kindle Fire using Tapatalk

If your on the rooted stock rom you could always wait until Amazon pushing the next OTA

You will have to make a fastboot image and flash that with fastboot. But before you create the image, you will have to create all the appropriate symlinks. Then you run...
Code:
make_ext4fs -l 512m -a system -s /path/to/fastboot_system.img /path/to/system_folder
That will create the fastboot image. Then when FFF gives you fastboot access, you run...
Code:
fastboot flash system fastboot_system.img
You will also need a fastboot image for recovery and the bootloader.

Isn't there any easy way like with my desire, simple ruu.
Or hasn't anyone created these images to flash. I also need to get back to stock everything and send it to amazon, my wifi gets error after some period of time and some times when screen goes off, try'd 3 roms and stock.

There is a way to tell the device to install /sdcard/update.zip via shell commands. I forget what they are tho. Something about the extendedcommands. If I have time tomorrow I'll look it up.

here it is:
http://www.theandroidsoul.com/kindle-fire-stock-rom-installation-guide/

b63 said:
here it is:
http://www.theandroidsoul.com/kindle-fire-stock-rom-installation-guide/
Click to expand...
Click to collapse
Thanks for the link. I'm back on this thread because I think my Kindle Fire touchscreen is now dead for good. However, those instructions do not work as-is because you need to press a button on the screen to tell the Kindle Fire to allow the host to mount it as a USB Mass Storage device. Although those instructions don't get you all the way there, I was able to use the core idea to get my Kindle Fire back to stock. So, many thanks for pointing me in the right direction.
On top of the touchscreen not working, I ended up partially bricking the device trying to find a way to flash it back to stock, so I had also posted in the Unbricking thread. I posted my solution there....
http://forum.xda-developers.com/showpost.php?p=23226260&postcount=701
Odds are, if you have a device that is booting correctly, you will be able to ignore steps 3 and 4 and get it booting back to stock. I do have a couple of other suggestions... Leave your USB cable hooked up to the Kindle Fire as it boots into stock for the first time. This is the only time that it will automatically mount the /sdcard to your computer and you will have a chance to reclaim (and delete) all the files stored there. You can also do something like 'adb pull /sdcard C:\sdcard' before you flash. Also, depending on what ROM and apps you were using before starting the process, you might want to delete your user data and reset the device to factory defaults. You can do this with 'fastboot erase userdata' and the next time you start the device, you'll get a warning that it's about to reset. Hit the power button and you should have a clean, fresh from the factory Kindle fire... albeit with a broken touchscreen. Good luck!

After several failed attempts to follow this guide (no offense to posters; I appreciate your contributions), I found this to be the simplest method.
http://stackoverflow.com/questions/10817721/wipe-data-factory-reset-through-adb
Download stock update, then it's basic procedure in adb:
adb push C:/update.zip /sdcard/update.zip
adb shell
recovery --wipe_data
After reboot, go back into to adb shell and do "recovery--update_package=/sdcard/update.zip"
Factory reset, etc. and you're good to go.

Kindle Fire bricked. Need major help

Hello, so this is my first time trying to root an android device, and I think I messed up. I watched a tutorial on youtube on how to do it and successfully installed superuser and twrp from a batch file ( I had to install adb drivers first ). I wasn't really sure I did it in the correct steps, so I wanted to revert back to the stock os. I booted into twrp and wiped the data ( cache, system, etc) from twrp. I then mounted it and transfered the kindle fire update 6.3.1 to my KF. I used the option on twrp to revert back to stock using the newly transferred zip. It ran for awhile then prompted me to click reboot. So I did. And this is where it gets tricky
After the reboot, all I see is the boot screen displaying "kindle fire." It never booted and lasted like this for hours. I tried to boot into twrp but I think it got deleted. I googled the problem and found it was in some sort of fastboot loop. I tried many fixes, using adb and other fastboot commands. Every time I tried anything, all I got was "waiting for device." Also, I couldn't use adb shell because it said system/bin/sh was not found. I went to my computer and found that the kindle fire no longer showed up as a removable device, but it showed up in device manager as adb composite interface under android phone. I thought that somehow all of my system files got deleted and thats why it says system/bin/sh not found. I tried to use the adb push command to manually send the update.zip to the KF but it is no longer a mounted drive, so there is nowhere to send it to. I'm at a loss here, Ive tried numerous utilities such as KFU, firekit, unbrick utility. I just need to figure out a way to remount the KF and copy over the folder "system" in the update.zip. If anyone could help me that would be great, as I have been trying to fix this for three days now.:fingers-crossed:

Read the How To in the attached link and it should help you figure out what the problem is and get you unbricked, http://forum.xda-developers.com/showthread.php?t=1552547.

tazmanhawaii said:
Read the How To in the attached link and it should help you figure out what the problem is and get you unbricked, http://forum.xda-developers.com/showthread.php?t=1552547.
Click to expand...
Click to collapse
That doesn't really help me at all, as I have tried the solutions that what you just posted provides, and none of them have worked. I have tried flashing firefirefire and twrp to the kindle fire using fastboot, but to no avail. I think I need a bit more help than a beginner's guide can provide, but thanks for the link.

Marblesnake said:
That doesn't really help me at all, as I have tried the solutions that what you just posted provides, and none of them have worked. I have tried flashing firefirefire and twrp to the kindle fire using fastboot, but to no avail. I think I need a bit more help than a beginner's guide can provide, but thanks for the link.
Click to expand...
Click to collapse
First of all, when you try to revert to stock without wiping the necessary partitions, bad things will happen. What usually happens is you end up with some sort of frankenROM with no working shell and no custom bootloader or recovery.
Based on your description, it seems like you aren't in fastboot at all. You can confirm this by paying attention to the boot screen at the device starts up. If you see a bright Kindle Fire logo that stays bright, you're in fastboot. If you see a bright Kindle Fire logo that dims a little after a few seconds, you're no longer in fastboot and the device is trying to boot normally. What usually happens in situations like yours is, not only does the system have no way of booting, but there is also no working shell to send the necessary commands to change the bootmode, and you will receive the typical "system/bin/sh not found" error.
The problem is without a working shell, you cannot get into fastboot to install custom recovery and you cannot install recovery while booted "normally" without a working shell.
You have two options:
* Acquire a factory cable. A Motorola style factory programming cable to be exact. You can purchase one, or make one yourself. There is a thread in the KF General forum with information regarding both. The factory cable will put the device in fastboot so you will be able to install custom recovery and repair your system.
or
* Use Firekit. But in order for Firekit to work properly in your situation, you need to put the device in USBboot to install a "new" bootloader and recovery. This consists of opening the device and using the "shorting trick" as described in the Firekit thread. I would suggest creating a liveUSB with "persistence" and install the SoupKit. SoupKit comes with Firekit along with a number of other tools you may find useful.
Either way, you need to get custom recovery installed so you can wipe your system and data (factory reset) partitions and flash a new ROM. If it's the stock ROM you want, MoDaCo is your best bet. Once you install a custom ROM, there is no need to "root" as all custom ROMs come pre-rooted.
Hope that helps.

soupmagnet said:
First of all, when you try to revert to stock without wiping the necessary partitions, bad things will happen. What usually happens is you end up with some sort of frankenROM with no working shell and no custom bootloader or recovery.
Based on your description, it seems like you aren't in fastboot at all. You can confirm this by paying attention to the boot screen at the device starts up. If you see a bright Kindle Fire logo that stays bright, you're in fastboot. If you see a bright Kindle Fire logo that dims a little after a few seconds, you're no longer in fastboot and the device is trying to boot normally. What usually happens in situations like yours is, not only does the system have no way of booting, but there is also no working shell to send the necessary commands to change the bootmode, and you will receive the typical "system/bin/sh not found" error.
The problem is without a working shell, you cannot get into fastboot to install custom recovery and you cannot install recovery while booted "normally" without a working shell.
You have two options:
* Acquire a factory cable. A Motorola style factory programming cable to be exact. You can purchase one, or make one yourself. There is a thread in the KF General forum with information regarding both. The factory cable will put the device in fastboot so you will be able to install custom recovery and repair your system.
or
* Use Firekit. But in order for Firekit to work properly in your situation, you need to put the device in USBboot to install a "new" bootloader and recovery. This consists of opening the device and using the "shorting trick" as described in the Firekit thread. I would suggest creating a liveUSB with "persistence" and install the SoupKit. SoupKit comes with Firekit along with a number of other tools you may find useful.
Either way, you need to get custom recovery installed so you can wipe your system and data (factory reset) partitions and flash a new ROM. If it's the stock ROM you want, MoDaCo is your best bet. Once you install a custom ROM, there is no need to "root" as all custom ROMs come pre-rooted.
Hope that helps.
Click to expand...
Click to collapse
Thanks for the help. Yeah, I tried the firekit method but didn't use the shorting trick. I have scoured the internet for information and tricks and it seems like these are my last two options before I throw this thing out the window. I have seen your posts in other threads and you have been a great help throughout this ordeal.

factory cable
thank you for this information. I am in the same predicament. I am purchasing a factory cable from Amazon $1.27.
It is sold by Earlybirdsavings and is a 3ft micro USB factory cable for kindle fire and Motorola Xoom.
thank you for all the helpful information!

[Q] Uh Oh...

Bought a new Nexus 7 because my wife and I have them and love them. We had bought our daughter a cheap 'funtab' from walmart just so she could play a few games she loves and hopefully leave ours alone, the funtab was a complete POS so it was returned to WM and just bought her a N7 instead.
When booted, the tablet it immediately notified me of the update from 4.1.2 to 4.2.1. Each time it tried to update it would fail partially through, not sure why. So I thought I'd download and use the toolkit to force the update. After unlocking, rooting, installing busybox and so on. I choose the option to flash stock image. The update process started OK there but part way through gave an error, something about needing to be 'X' but is instead 'x' before going back to the home screen. Now the tablet is stuck in fastboot mode, and cant boot to either recovery or android. I think I may be in trouble here.... Any suggestions?

#1 reason why people shouldn't use tool kits to root. You have no idea what went wrong or where the problem occurred.
I'm assuming that your tablet is unlocked so you need to download a custom recovery and install it via fastboot.
Then download the Stock 4.2.1 ROM from the Android development section and flash it in the recovery.
This should give you an idea of how to do it.
http://www.androidcentral.com/how-unlock-bootloader-and-root-your-nexus-7
Sent from my Nexus 7

I've done more research and I'm currently working on getting the android sdk going. I've downloaded it, jdk, the proper factory image (i think I f'd up by accidentally downloading the factory image for the hspa model). My question now is can the factory image be flashed from what appears to be fastboot mode, or do i need to flash custom recovery first (via the sdk)? I can confirm that the bootloaded is unlocked.

Ok so I was able to flash the stock image using the instructions found at http://forum.xda-developers.com/showthread.php?t=1907796
This process went extremely well once I had all my ducks in a row. Thanks for the help.

[Q] please help with my nexus....

I went to flash cyanogenmod 10.1.
backed up rom via clockwork.
wiped data, flashed new rom.
flashed gapps.
I think i flashed the wrong gapps
upon boot I get "setup wizard has stopped" as well as one regarding gapps.
this prevents me from using the rom. I can access the calender and clock that is all. not the settings or reboot menu.
I can access the built in storage via windows, shows up as a nexus 7.
Ok, not a big deal, I will boot into recovery via the bootloader.
That no longer works. Sits at a google screen forever
Ok, I will use fastboot via the bootloader....
That no longer works. As soon as a usb cable touches the nexus either power or pc it freezes the bootloader requires a reboot.
windows rejects the usb and states is malfunctioned and unrecognised (though it works fine in the rom)
fastboot doesn't see the device.
I've tried:
three usb cables.
windows safe mode.
different ports
uninstall/install drivers.
nexus tool kit (doesnt recognise device)
wiggling the cable as suggested
anybody got an idea how I can either get the bootloader not to freeze when using a usb cable or how to boot into some kind of recovery (which was there!!!!!)
please? :fingers-crossed:

Something seems a little off here.
Was it a gapps package for some other device? Hard to see why flashing something to /system would produce the result you got, as the (gapps) edify script would at most specify a mount of "system", not a /dev/block/ device name.
Does adb work (with the ROM booted)? If so, can you get a root shell or install .apks?
The fact that the ROM boots suggests that the bootloader is working correctly enough to load and execute the LNX (boot) image. That means that in principle you could flash (using the "dd" command) a recovery image to the boot partition from a root-privileged command line (either an adb session or a terminal emulator). Performing a regular (power button) restart would boot you into a recovery session.
Obviously, this hinges on you getting a command line somehow with your reduced-functionality ROM limping along as it is. It's not obvious to me how you will make that happen though.
I am not at all confident that this will fix the bootloader <--> USB issue without somehow reflashing the bootloader without using fastboot!. The only way this has been observed for the N7 has been with the OTA process and a stock recovery - the OTA puts an image (**note - important!** this OTA bootloader image is slightly different from the bootloader image in the factory/fastboot ROMs) into the USP partition and some magic occurs on the next boot.
Well, anyway there's some ideas. Would you mind identifying the "wrong" gapps that you used? For the life of me I can't see how it caused the symptoms you are observing...
good luck

Hi. Many thanks.
Ok.....
Gapps. I downloaded the appropriate package via the link on the Rom page. However, I flashed a jellybean package I'd downloaded for my one x. I may be naive in thinking that Gapps is Gapps no?
I deduced it was that having googled the setup wizard problem and seeing that others had had it.
Bootloader.
Again. Ive googled around and can see many have the freezing bootloader with usb issue. Some say its the cable. Some say its the pc. But it does it with the charger as well. Again this is an issue for some. not sure what to do! Works fine until the cable goes in.
Recovery.
Again I know its an issue booting recovery from bootloader. I've read you need the usb in to a pc to make it happen. Obviously that's a no go for me
Adb.
Never really used it. Used fastboot many times. I assumed you need to be able to access the developer options and activate debugging etc within the Rom to allow it to work? I can not do that. Its around 10% funtional. I can place a reminder on the calender but that's about it! No way to system settings.
Sorry if thats teaching you to suck eggs. You obviously know your stuff, just wanted to make it clear.
Ta.
Sent from my HTC One X+ using xda app-developers app

olly2097 said:
Recovery.
Again I know its an issue booting recovery from bootloader. I've read you need the usb in to a pc to make it happen. Obviously that's a no go for me
Click to expand...
Click to collapse
A normally functioning tablet does NOT require you to be plugged in to a PC in order to boot the recovery from the bootloader menu. Maybe you are saying something else here, but I trust you've tried starting the recovery without anything plugged in at all.
Unless you can get the recovery working, the only hope you have is somehow levering up what you have available to gain a privileged thread of execution. Obviously that's going to be pretty challenging.
good luck - you're going to need it.
PS: could you provide a URL to the *wrong* One X gapps download? I think the gapps bundle ships with system libraries - I want to peek at those libs to see if there are any hardcoded block device paths that might explain the queerness you observed. (I can't imagine why this would be the case, but...)

bftb0 said:
A normally functioning tablet does NOT require you to be plugged in to a PC in order to boot the recovery from the bootloader menu. Maybe you are saying something else here, but I trust you've tried starting the recovery without anything plugged in at all.
Unless you can get the recovery working, the only hope you have is somehow levering up what you have available to gain a privileged thread of execution. Obviously that's going to be pretty challenging.
good luck - you're going to need it.
PS: could you provide a URL to the *wrong* One X gapps download? I think the gapps bundle ships with system libraries - I want to peek at those libs to see if there are any hardcoded block device paths that might explain the queerness you observed. (I can't imagine why this would be the case, but...)
Click to expand...
Click to collapse
yeah, tried both ways.
The gapps I downloaded was a while ago. I've deleted it. was for 4.1.1
anyway. I....
Booted to bootloader, selected recovery, pressed power and rammed in the usb cable at the same time.
recovery
now running rom fine after flashing TW recovery via toolkit and mounting to pc.
I cant explain it. it took forever. but thank you

[Q] Odd Recovery problem

I'll be as descriptive as possible.
I must have did a bad flash with CWM, so I tried to reflash with CWM, TWRP, and even the OEM recovery. When attempting to boot to recovery, the screen goes blank. My pc attempts to connect every drive letter I've got when I plug in the usb. Among which, I can access an image folder on the device. Can't figure out how a bad recovery flash does this, but I can't find a fix for the life of me. Phone works as it should. My problem is anything involving recovery will give me a black screen, so factory wipe will not work.
Any ideas would be well appreciated.
Thanks

I tried following this guide: http://forum.xda-developers.com/showthread.php?t=2471370
The program get's stuck at analyzing device and doesn't flash or download anything. It would be nice if I can perform at least a factory reset in case something wants to blow up in my face. If anyone has some ideas (ridiculous or not), feel free to let me know.

slicknessessity said:
I'll be as descriptive as possible.
I must have did a bad flash with CWM, so I tried to reflash with CWM, TWRP, and even the OEM recovery. When attempting to boot to recovery, the screen goes blank. My pc attempts to connect every drive letter I've got when I plug in the usb. Among which, I can access an image folder on the device. Can't figure out how a bad recovery flash does this, but I can't find a fix for the life of me. Phone works as it should. My problem is anything involving recovery will give me a black screen, so factory wipe will not work.
Any ideas would be well appreciated.
Thanks
Click to expand...
Click to collapse
Hey man you could try just using Flashify to flash a recovery...its a app...then boot to recovery

I tried using that method. It gives me the same thing. Maybe somewhere in the recovery location (or associated locations) seem to may have gotten damaged somehow during the bad flash? Flashing the phone completely I'm sure would do the trick. I came from the droid 4, so sbf/fastboot flash would solve all my problems. Searching around landed me to a kdz, which seemed to be an equivalent, but isn't working or maybe I'm doing something wrong? Any advice on this would be greatly appreciated.

I went and did a full flash using this method: http://forum.xda-developers.com/showthread.php?t=2448960. Since I couldn't find a recovery fix per se, I decided to flash the whole thing and start fresh (oh well).
It downgraded to 11A in the process, so the same can probably be said for 10B for compatible custom builds.