[Q] Help, installed D800 into LS980! - G2 Q&A, Help & Troubleshooting

So I got this phone a few days ago. It was originally rooted, so I wanted to go back to factory settings just because I bought this from someone and wanted to get rid of everything. The guy failed to tell me it was an LS980. I had AT&T and installed the D800 image. Now, I can't install the LS980 because the flash tool says it's wrong. My phone will boot up, but for only 30 seconds or so. I can go to download mode.
Please give me some very precise instructions. I'm new to Android and I don't know much about them yet.

CoopTang said:
So I got this phone a few days ago. It was originally rooted, so I wanted to go back to factory settings just because I bought this from someone and wanted to get rid of everything. The guy failed to tell me it was an LS980. I had AT&T and installed the D800 image. Now, I can't install the LS980 because the flash tool says it's wrong. My phone will boot up, but for only 30 seconds or so. I can go to download mode.
Please give me some very precise instructions. I'm new to Android and I don't know much about them yet.
Click to expand...
Click to collapse
okay in this thread there is a dll that skips the check of the phone so as long as you grab the correct stock file to flash for your phone you should be able to flash back to ls980 rom
http://forum.xda-developers.com/showthread.php?t=2483043
edit: here is a thread that has step by step to go back to stock http://forum.xda-developers.com/showthread.php?t=2432476 also you can download other files you may need there

XxZombiePikachu said:
okay in this thread there is a dll that skips the check of the phone so as long as you grab the correct stock file to flash for your phone you should be able to flash back to ls980 rom
http://forum.xda-developers.com/showthread.php?t=2483043
edit: here is a thread that has step by step to go back to stock http://forum.xda-developers.com/showthread.php?t=2432476 also you can download other files you may need there
Click to expand...
Click to collapse
Does my phone have to be rooted for this to work?
I got a failure saying CrossDL [800] to [LS980]

CoopTang said:
Does my phone have to be rooted for this to work?
I got a failure saying CrossDL [800] to [LS980]
Click to expand...
Click to collapse
I thought that dll would work and also no you don't need to be rooted for it to work

XxZombiePikachu said:
I thought that dll would work and also no you don't need to be rooted for it to work
Click to expand...
Click to collapse
Is there another image I can put in that will go to LS980? I didn't get the wrong version error like I did with the original dll.

CoopTang said:
Is there another image I can put in that will go to LS980? I didn't get the wrong version error like I did with the original dll.
Click to expand...
Click to collapse
yes because that dll bypasses the phone model check but I've never gotten that error

Anyone else have any ideas? I used that dll file that ignores checks and I get a failure saying "CrossDL [D800] to [LS980]" I've also used both of the "back to stock" and "LS980zv8" .tot
If anyone can help, it would be greatly appreciated. I'm phoneless right now.

Anyone?

CoopTang said:
Does my phone have to be rooted for this to work?
I got a failure saying CrossDL [800] to [LS980]
Click to expand...
Click to collapse
Hello. If Your phone not operate till now, i can buy it from you. If you are interested - please write to private message. thanks.

Related

[Q] G2 d800 with d802 rom/firmware bad flash

I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
iredline5 said:
I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
Click to expand...
Click to collapse
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
bullghost said:
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
Click to expand...
Click to collapse
Tried that, but it fails due to firmware and phone being different. thanks for the help
same problem need help
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
x714x said:
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
then you will need ADB to boot into recovery
ssreynolds said:
then you will need ADB to boot into recovery
Click to expand...
Click to collapse
Going give this a try again. But the issue is if my pc has enough time to sync with the phone before the phone reboots.
I've tried something along those lines but to no avail. My phone doesn't show up on my computer in its current status. How can I get map to recognize my phone I have the drives installed and lg upgrade tool can see it so I know it can kinda see it. When I ran Adb devices nothing comes up on the ASB command prompt
kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
don't think that's going to work for my situation but I'll give it a try in a bit. So I would get a d800 rom and load d802 .dll? I think once the program sees the .dll file and the firmware, it will fail.
bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
kenpachiramasam said:
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
Click to expand...
Click to collapse
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
iredline5 said:
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
Click to expand...
Click to collapse
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
kenpachiramasam said:
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
Click to expand...
Click to collapse
Tried it with the d802 dll file and d800. Still fails for me.
Here is the d802.dll
https://www.dropbox.com/s/77isqnkeuixkj6u/LGD802_20130912_LGFLASHv160.dll
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
kenpachiramasam said:
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
Click to expand...
Click to collapse
i think we need some one to hack the dll or the LGFlashTools to skip TOT checking
Ya if we could get someone to do that then I could get everything to go through. Unfortunately I don't know any one with much programming or coding skills. But thanks for the help so far man. It's nice to know not everyone on the Internet is an asshole
kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
if you can stay longger in fastboot mode
try flash VZ laf.img
fastboot erase laf
fastboot flash laf laf.img
here how to and tool for fastboot
http://forum.xda-developers.com/showthread.php?t=2477595
i think this partition also the responsible for phone type ex D802 or VZ980 where LGFlashTools use it to detect phone type
laf partition will bring download mode to you
Hahaha tried this one to and the one it links me too. My phone isn't reconized my my computer so doing things throught the PCs CMD is out of the question for me and so is pushing the boot .img via ADB since my phone wasn't In debugging mode when I bricked it. But again thanks man. I think I've exhausted most of the conventional fix it threads on this since I've been looking through everything since Sunday

Secure Boot Error F320S!

Hello! I have a problem which I don't know how to fix, so I need some help! I'm running stock android 4.4 (20a) and have flashed CWM through Flashify, but every time I try to boot into recovery, I get this message:
"Secure booting error
Error: Boot Certification Verify!"
Recovery worked in android 4.2 (11g), but I messed my phone up, and flashed the latest .kdz-file for my phone. It was after that the recovery-problem appeard.
I've read some places about people with D802 who has this problem, but the fixes they've got only works for D802 and D800. So, how can I fix my F320S? I guess there are more people with the korean version who has stumbled upon this problem, so if you got a fix, please post it!
Excuse my typos if there are any!
Thank you!
LG G2 F320S
Put phone in download mode, and flash the stock KDZ.
If you cannot do this, then you are hard bricked. I had an LG Optimus G which I got a Secure Boot Error after flashing a compatible ROM using TWRP, and although it could get into download mode, it would never be seen as a COM Port in the computer again to it couldn't be seen by the Flash Tools software to restore KDZ.
But it is a stock image I've flashed... What causes the problem!?
Edit: I tried to put it in Download-mode, but the secure-boot error apeard there too... But the phone can't be bricked, as it's booting to Android and everything works...
Would this fix it if the developer made a version based on my aboot?
http://forum.xda-developers.com/showthread.php?t=2500441
Edit no.2: I pressed the wrong button-combination, so yes, I was able to access Download-mode, and it works like a charm!
Send with my LG G2 F320S!
Secure Boot Error D802
2minuutes said:
But it is a stock image I've flashed... What causes the problem!?
Edit: I tried to put it in Download-mode, but the secure-boot error apeard there too... But the phone can't be bricked, as it's booting to Android and everything works...
Would this fix it if the developer made a version based on my aboot?
http://forum.xda-developers.com/showthread.php?t=2500441
Edit no.2: I pressed the wrong button-combination, so yes, I was able to access Download-mode, and it works like a charm!
Send with my LG G2 F320S!
Click to expand...
Click to collapse
Did you ever fix this, and how? I just stumbled on to the same problem the same way. I've got a D802 international. Recovery is corrupted with the same error as yours. That was nonsense about being bricked above. I hate that when people give wrong info. Any help definitely appreciated.
notanymore said:
Did you ever fix this, and how? I just stumbled on to the same problem the same way. I've got a D802 international. Recovery is corrupted with the same error as yours. That was nonsense about being bricked above. I hate that when people give wrong info. Any help definitely appreciated.
Click to expand...
Click to collapse
I did not, but I've read a place where devs managed to roll back just the bootloader and in that way access recovery!
Secure Boot Error D802
2minuutes said:
I did not, but I've read a place where devs managed to roll back just the bootloader and in that way access recovery!
Click to expand...
Click to collapse
I'm wondering what happens if I do a factory reset? Trying to get up the nerve to do it. If not then I think the next best option is to wait for 4.4.3 or higher.
notanymore said:
I'm wondering what happens if I do a factory reset? Trying to get up the nerve to do it. If not then I think the next best option is to wait for 4.4.3 or higher.
Click to expand...
Click to collapse
I don't think a reset will fix it as it's not fixing any corrupt data. The problem lays in the bootloader. It's not able to boot into the recovery installed as if it was an earlier build. It looks like this is what you are looking for to be able to install a recovery the right way. I haven't tried it yet, tho.
Secure Boot Error D802
2minuutes said:
I don't think a reset will fix it as it's not fixing any corrupt data. The problem lays in the bootloader. It's not able to boot into the recovery installed as if it was an earlier build. It looks like this is what you are looking for to be able to install a recovery the right way. I haven't tried it yet, tho.
Click to expand...
Click to collapse
Ok thanks!
Secure Boot Error D802
2minuutes said:
I don't think a reset will fix it as it's not fixing any corrupt data. The problem lays in the bootloader. It's not able to boot into the recovery installed as if it was an earlier build. It looks like this is what you are looking for to be able to install a recovery the right way. I haven't tried it yet, tho.
Click to expand...
Click to collapse
It worked! I took the plunge and it worked immediately. I've got TWRP. I already had root so did not have to use the iroot. I just ran the autorec.apk and problem solved.
Dear sir
My lg f320L and in this phone i have cloudyG2_3.3 version
i wana flash my phone F320L30D
when i flashd 2 % it stop
i have security error in my phole
please HELP
sorry my english poor

accident flash D803 to D801 lol

hi everyone
if your like me and like to flash and flash stuff by accident things that shouldnt be on your varient lol. (my phone is D803 rogers and i managed to flash t-mo onto it and got stuck in fastboot mode. no download mode no recovery possible at all at this point no matter what button sequence i tried instantly fastboot)after hours of research and trial and error. i managed to use a couple programs that helped me boot my phone D803 which now thinks its a D801 and fully boots as T-mo and at this point it booted and my simcard is not a proper sim it says.
anyways the story is i was able to create a zip that turned my D803 which turned into a D801 back into a D803 and save my fastboot bricked device woohoo.
if any1 needs info on how this was done i will write it down when i have a little more time on my hands.
and also i will thank all the people i can that made the forums and tools that were needed for this to be done.
thanks Jester
same
Same here. I had my phone telling me it was the wrong version when I tried to use the lg g2 factory flash tool.
jbabio said:
Same here. I had my phone telling me it was the wrong version when I tried to use the lg g2 factory flash tool.
Click to expand...
Click to collapse
were u able to get it back?
Goto AT&T Dev section, find my poweruser ROM post. In the first post there is a dll that you can use to flash back to your original firmware. Does not check model number...
jester12345 said:
were u able to get it back?
Click to expand...
Click to collapse
Yes, I had to use fastboot and remove system. Once I did this the lg g2 tool allowed me to reflash the phone back to factory.
jbabio said:
Yes, I had to use fastboot and remove system. Once I did this the lg g2 tool allowed me to reflash the phone back to factory.
Click to expand...
Click to collapse
Did the dll file I pointed you to work?
AndroidUser00110001 said:
Did the dll file I pointed you to work?
Click to expand...
Click to collapse
i have not tried it yet. but i downloaded it and will next time i brick my phone im assuming i use the lg flash tool and not the factory kdz flasher?
AndroidUser00110001 said:
Goto AT&T Dev section, find my poweruser ROM post. In the first post there is a dll that you can use to flash back to your original firmware. Does not check model number...
Click to expand...
Click to collapse
Ohhh I will download this. Next time I run into a problem I will use it. Thanks alot and nice work!
D803 question
Hey, kind of related... I'm considering upgrading to the G2 (from Samsung GS2 LTE aka: skyrocket) but i noticed that there isn't a 'D803' or 'rogers' section in the forums. So if i want to flash a custom OS, which versions should i be using? 802? are there dedicated 803 roms and I'm just not seeing them?
Any info would be appreciated.
Jrock_Xtreme said:
Hey, kind of related... I'm considering upgrading to the G2 (from Samsung GS2 LTE aka: skyrocket) but i noticed that there isn't a 'D803' or 'rogers' section in the forums. So if i want to flash a custom OS, which versions should i be using? 802? are there dedicated 803 roms and I'm just not seeing them?
Any info would be appreciated.
Click to expand...
Click to collapse
most roms youll see d800/801/802/803 etc. most cm and aosp are fine i found. just dont do any off the stock kitkat flashing. thats what i did and i got lucky once... i fixed it. but the second time i killed my phone
this site has a few roms made for d803 http://forum.xda-developers.com/showthread.php?t=2611749
Hey what's up. I had this issue happen to me and it was a big pain for me to fix and there is no official fix. This is what I did in order to fix it. You basically need to adb pull your build prop end change the model number to your original number and place it back on your SD card and change your system over to rewrite able and push the new build prop to your system and bam!!!!! Fixed
Sent from my LG-D800 using Tapatalk
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
jester12345 said:
hi everyone
if your like me and like to flash and flash stuff by accident things that shouldnt be on your varient lol. (my phone is D803 rogers and i managed to flash t-mo onto it and got stuck in fastboot mode. no download mode no recovery possible at all at this point no matter what button sequence i tried instantly fastboot)after hours of research and trial and error. i managed to use a couple programs that helped me boot my phone D803 which now thinks its a D801 and fully boots as T-mo and at this point it booted and my simcard is not a proper sim it says.
anyways the story is i was able to create a zip that turned my D803 which turned into a D801 back into a D803 and save my fastboot bricked device woohoo.
if any1 needs info on how this was done i will write it down when i have a little more time on my hands.
and also i will thank all the people i can that made the forums and tools that were needed for this to be done.
thanks Jester
Click to expand...
Click to collapse
The fix is above or quick and works. Trust me
jbabio said:
Same here. I had my phone telling me it was the wrong version when I tried to use the lg g2 factory flash tool.
Click to expand...
Click to collapse
Try what I said up top
AndroidUser00110001 said:
Goto AT&T Dev section, find my poweruser ROM post. In the first post there is a dll that you can use to flash back to your original firmware. Does not check model number...
Click to expand...
Click to collapse
The DLL doesn't work for the d800 I know that for a fact but not sure about the other models
Sent from my LG-D800 using Tapatalk
im guessing my issue was a bit different. as i couldnt even get a download mode.
what i did was use
fastboot used erase laf then flashed all the ones im gonna mention. d803 laf.img flashed that and since i was already flashing laf i flashed all the rest i could find such as recovery aboot etc.follow this thread to do all this if you have lost download mode and but have it stuck in fastboot mode
http://forum.xda-developers.com/showthread.php?t=2477595 thanks to cms88168 for this step by step. just download all images for your device. mine was d803 so i downloaded all d803 imgs.
then you can head over to http://forum.xda-developers.com/showthread.php?t=2483043 and get the DLL file he has made which works with any version i tried 801-802 and 803 tot file. . thanks to AndroidUser00110001 for making this dll file.
you will need to get your model tot file and LGflashtool which can be found it the thread posted above. but please make sure you have your proper tot file. flash that and your good to go. sorry im sure my instructions are all over but should be in right order. im just used to doing not explaining for others. good luck and hope you fix your device

[Q] Soft Brick help me please!!!

PLEASE READ EVERYTHING FOR BETTER UNDERSTANDING
Hey fellow LG Owner(s) I am writing this asking for some help. I know that majority of LG Phones use the same software and flashing tools regarding taking your phone back to stock. I currently own an LG G Flex (LS995 Sprint Variant) and I managed to soft brick my phone. I have posted this same message over at the LG G Flex Threads but so far I have gotten no one to provide me some sort of solution on how to un-brick or factory reset my phone.
The status of my phone before it got bricked was it had Root (IOROOT method), Busy-Box (by Jrummy), Build.Prop was edited to display as a Nexus 5, and boot-loader locked along with no custom recovery. If you’re wondering why my boot-loader was locked and why there wasn’t any type of custom recovery was due to the sad fact that Developers are having a hard time on cracking it.
Now to explain on how I soft bricked my phone. I was changing my font style by using a tool called ROM Toolbox (by Jrummy). I managed to change my font once and I attempted to change it a second time, since I was looking for something that displayed it wider and bolder. So as I applied install on the new font I got an automatic reboot.
The reboot consisted of the normal LG Logo display, followed by a black screen and staying as a black screen. On the upper left of my phone the notification indicator was flashing multiple colors (red, white, blue etc). This is the current state of my phone, black screen with a multicolor notification.
My attempts to fix:
- Simple reboot of the phone ((fail))
- Let the phones battery drain out then charge for a few minutes and restart ((fail))
- Managed to get into STOCK recovery and perform clean partition ((fail)
- Managed to get into STOCK recovery and apply factory reset ((fail))
- I got into some weird mode which also gave me the option to apply factory reset ((fail))
- I followed this tutorial (LG Flash Tool) on how to revert back to stock (by hyelton) ((fail))
Link to tutorial: http://forum.xda-developers.com/showthread.php?t=2644083
The tutorial by hyelton was almost successful to reverting back to stock firmware until I got to the last step (Number 6). The error that occurred by using the LG Flash Tool was when the tool attempted to flash the stock firmware it gave me a Download FAIL!! “Device Model is different“ notification (Images below). I did this tutorial at least seven times and I got no luck. Every single time that I attempted to do this I kept getting the same notification. I have now ran out if ideas on what to do.
My theory, I believe that by changing my build prop to display as a nexus 5 is the reason why I keep getting this fail notification. On the phone it-self when I put it into download mode it even displays as a Nexus 5 (Images below).
I was wondering since it’s possible to get into STOCK RECOVERY, I saw that it had an option for “ADB SIDELOAD” is it possible to push something thru ADB??? Any type of help is greatly appreciated and thanked. Please do not get upset that you see this in multiple LG threads, I am just trying to find a solution to UNBRICK this very expensive phone that I bought and I cannot afford to just use it as a paper weight. THANK YOU AND GOD BLESS
Here is a Link to all my files regarding STOCK tot,dll,lg flash tools,aboot, buildprop, lg usb drivers and adb drivers that are for my phone
Link: https://drive.google.com/folderview?id=0B1D8UNLjuTB6TWpCQ1pJME5qWk0&usp=sharing
i hope these files help anyone that are attempting to help me put my phone back to stock
Alright yall, I am almost official screwed. I purchased this phone about a month ago from Best Buy and they stated that I am out of there 15 day window so I cannot exchange or replace for the same phone. I then went to Sprint on whom I have phone insurance for and they stated that they cannot do anything and that I have to go to one of their Sprint repair stores. I went to one of the repair stores and the gentlemen that assisted me plugged my phone to his computer and immediately knew that my phone was rooted. So from there I played the dumb blonde card acting like I don’t know what he’s talking about and from there he directed me to call LG and see what they can do. So now the current status is I filed a repair request and now I am awaiting a reply from LG. Does anyone have any suggestion???
**SOLUTION** hey yall i got the solution to my problem and it was simply by downloading this universal custom .dll from
http://forum.xda-developers.com/show....php?t=2663369
and i managed to flash back to stock recovery using this guide. instead using the dll on the the guide i used the custom one.
*GUIDE BACK TO STOCK*
http://forum.xda-developers.com/show....php?t=2644083
BUMP
well not sure about g flex but for my g2 I had same problem when flashing back to stock it kept saying wrong firmware finally I found I downloaded an updated firmware and so did not match error, try downloading and flashing the firmware the phone came with but not updated, in my case my phone came with d80010d and I was trying to flash updated d80010o, downloaded d80010d and all went fine, not sure if it's the same for you I too changed my phone model in build.prop and my phone went into fastboot mode on restart. Hope it saves u too.
Sent from my LG-D800 using xda app-developers app
can you link me to where I can find the dll you are using?
XxZombiePikachu said:
can you link me to where I can find the dll you are using?
Click to expand...
Click to collapse
its the second oneeeeeeee
http://storagecow.eu/index.php?dir=Xda/LG+G+Flex/Stock/Sprint+LS995/
lingarajug said:
well not sure about g flex but for my g2 I had same problem when flashing back to stock it kept saying wrong firmware finally I found I downloaded an updated firmware and so did not match error, try downloading and flashing the firmware the phone came with but not updated, in my case my phone came with d80010d and I was trying to flash updated d80010o, downloaded d80010d and all went fine, not sure if it's the same for you I too changed my phone model in build.prop and my phone went into fastboot mode on restart. Hope it saves u too.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
thanks for your response but unfortunately there is only one firmware for the sprint flex at the current moment.
christiam.coronado said:
its the second oneeeeeeee
http://storagecow.eu/index.php?dir=Xda/LG+G+Flex/Stock/Sprint+LS995/
Click to expand...
Click to collapse
ok then try this modified dll hopefully it will work https://www.dropbox.com/s/akcn2b3skv9h4pa/LGLS995_20140116_LGFLASHv151.dll
please do so at your own risk
XxZombiePikachu said:
ok then try this modified dll hopefully it will work https://www.dropbox.com/s/akcn2b3skv9h4pa/LGLS995_20140116_LGFLASHv151.dll
please do so at your own risk
Click to expand...
Click to collapse
same results "device model is different" didnt work. Im willing to try anything. please shoot me some more of your modifications
christiam.coronado said:
same results "device model is different" didnt work. Im willing to try anything. please shoot me some more of your modifications
Click to expand...
Click to collapse
ill see what else I can try I am basically just trying to find out which are all the parts of the dll that check the device which is kind of difficult especially since yours is no longer a part of the g family ill keep looking when I finish the next one I'll let you know
XxZombiePikachu said:
ill see what else I can try I am basically just trying to find out which are all the parts of the dll that check the device which is kind of difficult especially since yours is no longer a part of the g family ill keep looking when I finish the next one I'll let you know
Click to expand...
Click to collapse
wow thanks i greatly appreciate your help. i am open to trial and error and whatever you can think of i will try.
christiam.coronado said:
wow thanks i greatly appreciate your help. i am open to trial and error and whatever you can think of i will try.
Click to expand...
Click to collapse
what did you add to your build prop to make it think it was a nexus 5?
XxZombiePikachu said:
what did you add to your build prop to make it think it was a nexus 5?
Click to expand...
Click to collapse
all that i did to the build prop was change the model to Nexus 5. luckily i have copied my original build prop to my computer. here is the ling to my google drive which i have saved my original build prop
https://drive.google.com/file/d/0B1D8UNLjuTB6UVBGZnhIaWEwNjg/edit?usp=sharing
XxZombiePikachu said:
what did you add to your build prop to make it think it was a nexus 5?
Click to expand...
Click to collapse
attached below is an image of what my original build prop looked like with its original model as ro.product.model = LG-LS995
the LG-LS995 was the part that i replaced with Nexus 5
Why not try to restore your default build prop
Sent from my LT25i using xda app-developers app
harrymason37 said:
Why not try to restore your default build prop
Sent from my LT25i using xda app-developers app
Click to expand...
Click to collapse
how remember that my bootloader is still locked and this model does not have a custom recovery. but i am able to access the stock recovery with an option to ADB SIDELOAD. I got word from a DEV stating that:
"Factory recovery won't let you adb sideload a package without a LG verified updater script so it won't work." (by XDA justinswidebody)
but if he is incorrect i wouldn't mind attempting trial and error. what do you think???
okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll
XxZombiePikachu said:
okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll
Click to expand...
Click to collapse
ok ill try it out give me a minute
XxZombiePikachu said:
okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll
Click to expand...
Click to collapse
no didnt load onto the lgflashtool. these are the notification that i got, images are below
-Failed to load factory s/w
-Failed PreviousLoad ()
christiam.coronado said:
no didnt load onto the lgflashtool. these are the notification that i got, images are below
-Failed to load factory s/w
-Failed PreviousLoad ()
Click to expand...
Click to collapse
what's the version of your flash tool
edit: after some reading to flash nexus tots you need lg flash tool 1.8
re-edit: I believe that the dll needs to be modified so that it accepts the device as a nexus 5 but once it's done flashing it needs to make the device and ls995 again, but for now it's 1am and I need to be up early later so I'll work on something later, also just some extra information on ther stuff: as for flashing the build prop if you can manage to make it into a flashable update.zip(which also places it in corresponding directory) which is also signed and you can sideload it should flash or just give an error, and another thing that could work with above method is flashing a corrupted kernel which will throw your phone into fastboot mode and with correct files and commands you can repartition the entire device to stock(this one is very dangerous/risky would not recommend it)
XxZombiePikachu said:
what's the version of your flash tool
Click to expand...
Click to collapse
Setup_LGFlashTool_1.6.01.0529
its on my drive should i downgrade??? https://drive.google.com/file/d/0B1D8UNLjuTB6ekthOGRVMWE3ejA/edit?usp=sharing

I think my G2 is bricked :(

I had a rooted LG G2 D802 on EE with KK update that was working fine until today...
I tried to flash a nice custom rom to it and well, to cut a long story short something went wrong and the next thing i know i have a phone which only shows up as about 10 hdd's in windows, and as QHSUSB_BULK in device manager.
I couldn't get it to go into download mode or anything, so i followed the Unbricking guide here:
http://forum.xda-developers.com/showthread.php?t=2582142
Unfortunately this appeared to do nothing for the phone, so i used the Tung Lee guide and this also did nothing.
After i did the above guide the phone was no longer recognised in windows or Linux, but thanks to this post:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
I was able to at least get it back to the state it was in in the first place.
After following all these guides i am now at a loss as to how to sort my phone out,and i'm hoping someone here can point me in the right direction for a fix..
When the phone was working, i put the imei into the firmware engine and it found me the D80220H firmware, i have tried using the bin files from the first guide and from D80220B as well with no luck, so i was wondering if one of the above guides do indeed work, how can i get the .img files i need from a D80220H KDZ?
Its been a long night and i'm now currently without my phone, i'm hoping someone can help and i can get my beloved G2 back to a working state before the weekend.
Thanks in advance, and sorry for the long post.
Tony
Have you simply tried the LG Flash Tool? When it happened to me once, i simply reg
Flashed kdz using this tool and voila!!! Try and report
@Shadowhunta Are you using the twrp IMG from that first guide? That might explain why this isnt working. Extract the kdz using this tool
Flash the aboot, boot and laf then try download mode.
wisefreakz said:
Have you simply tried the LG Flash Tool? When it happened to me once, i simply reg
Flashed kdz using this tool and voila!!! Try and report
Click to expand...
Click to collapse
Gonna try this during my lunchbreak today!
Art Vanderlay said:
@Shadowhunta Are you using the twrp IMG from that first guide? That might explain why this isnt working. Extract the kdz using this tool
Flash the aboot, boot and laf then try download mode.
Click to expand...
Click to collapse
I was using the TWRP from that post, but then i downloaded the latest one and that didn't make any difference, I haven't tried that tool properly yet to get the .img files needed from the KDZ i have for D80220H, but i have flashed the aboot, boot and laf of D80220B and that didn't help either, i couldn't get it into recovery mode, download mode or anything! With the first tutorial i managed to get it into Hard reset mode, but it just hung on processing.
Thanks for the suggestions, i will try them during lunch and get back to you both, thank you so far!
Anyone else had the same problem as me, keep the suggestions coming, all are helpful and appreciated
wisefreakz said:
Have you simply tried the LG Flash Tool? When it happened to me once, i simply reg
Flashed kdz using this tool and voila!!! Try and report
Click to expand...
Click to collapse
Tried this, no dice
Flash tool keeps telling me my phone is disconnected even though its seen as QHSUSB_BULK and as about 10 local disks in disk manager lol
Shadowhunta said:
Tried this, no dice
Flash tool keeps telling me my phone is disconnected even though its seen as QHSUSB_BULK and as about 10 local disks in disk manager lol
Click to expand...
Click to collapse
follow this tutorial... same problem as yours https://www.youtube.com/watch?v=_d5b_osUTug
wisefreakz said:
follow this tutorial... same problem as yours
Click to expand...
Click to collapse
Followed that, still nothing, won't boot into recovery mode, only thing it does is show in windows as a load of local disks, and QHSUSB_BULK in device manager with a yellow exclamation mark
I've followed all the advice so far given and none of it worked, i think i'm screwed :/
Art Vanderlay said:
@Shadowhunta Are you using the twrp IMG from that first guide? That might explain why this isnt working. Extract the kdz using this tool
Flash the aboot, boot and laf then try download mode.
Click to expand...
Click to collapse
Tried this too, nothing, it won't go into download mode.
I have the same problem, please do tell me if any of you find a solution.
I am seriously stuck
What model you guys have?
wisefreakz said:
What model you guys have?
Click to expand...
Click to collapse
I have D802.
Switched999 said:
I have D802.
Click to expand...
Click to collapse
Same, D802.
I phoned LG on saturday and have decided to send it in for repair, i only need it to keep me going till November then i can get the G4.
Well LG have tajen their sweet time, i won't be getting the envelope to send it back in until monday.
Soooo if i can get this fixed before then i would be very happy!
Does anyone else have any ideas please?

Categories

Resources