Related
If I am on AT&T with MDL can I upgrade to 4.3 without going to MF3?
dtronx said:
If I am on AT&T with MDL can I upgrade to 4.3 without going to MF3?
Click to expand...
Click to collapse
No.
However, I suggest you just install one of the 4.3 ROMS (there is at least one available already) from the development section instead of taking the full update so you can still use a custom recovery and LOKI'd ROMs..
scott14719 said:
No.
However, I suggest you just install one of the 4.3 ROMS (there is at least one available already) from the development section instead of taking the full update so you can still use a custom recovery and LOKI'd ROMs..
Click to expand...
Click to collapse
Thanks will do that
I would check out ShoStock-i MF3 or Venoms or Ax's International Roms. At all cost keep your MDL Bootloaders and have access to custom recoveries and flash WHATEVER you want. Safestrap is nice IF your stuck on MF3 but it has its limitations on what you can flash with it. Plus I am sure once the official tar drops for the ATT MJ9 firmware you will see some Roms based on ATTs stock firmwares and STILL have the ability to go back to other older firmwares if you want. With SafeStrap you are limited to 4.2.2 Roms at this time
Sent From My ATT S3 i747 Dark Blue BadAss Theme
Hi, guys
I want to flash danvdh google edition 4.4.2 ROM on my ATT g4 (MF3) with safe strap.
After I create rom-slot1, wipe all the data and install from sd card with the rom zip file I put there already, looks like it start flash, but got "success" in less than 1 min. I flash loki-doki after that (because I was told it's necessary for my phone). Then I reboot, adter safe sreap screen, click continue, black screen with some viabration. nothing happened.
Actually I check the md5 of the rom I download, it's correct. not sure why flash got a "success" in 1 min, suppose should be long.
Anyone can give some suggestion? REally appreciate it.
You need to do more reading. Safestrap only works with touchwiz ROMs, and only other 4.2.2 ROMs since you're on MF3.
Sent from Black<3's I337 running Hyperdrive
DeadlySin9 said:
You need to do more reading. Safestrap only works with touchwiz ROMs, and only other 4.2.2 ROMs since you're on MF3.
Sent from Black<3's I337 running Hyperdrive
Click to expand...
Click to collapse
Thanks for the reply. But I was told I should use safe strap on another my post when I asked how to flash "danvdh google edition 4.4.2 ROM" with MF3.
Do you mean MF3 can not be flashed to kitkat now?
Sorry for those questions, I searched and found a post with same question but no people answer.
Thanks ain advance!
roy316 said:
Thanks for the reply. But I was told I should use safe strap on another my post when I asked how to flash "danvdh google edition 4.4.2 ROM" with MF3.
Do you mean MF3 can not be flashed to kitkat now?
Sorry for those questions, I searched and found a post with same question but no people answer.
Thanks ain advance!
Click to expand...
Click to collapse
As i said, only Touchwiz and other 4.2.2 if you're on MF3. So no kitkat now.
DeadlySin9 said:
As i said, only Touchwiz and other 4.2.2 if you're on MF3. So no kitkat now.
Click to expand...
Click to collapse
Thanks for the reply.
Sad~~
DeadlySin9 said:
As i said, only Touchwiz and other 4.2.2 if you're on MF3. So no kitkat now.
Click to expand...
Click to collapse
Is there any methods now to upgrade AT&TMF3 from 4.2.2 to 4.4?
Thanks!
roy316 said:
Is there any methods now to upgrade AT&TMF3 from 4.2.2 to 4.4?
Thanks!
Click to expand...
Click to collapse
There is the 4.4 leak, but no root of Safestrap for it yet. You'll have to wait for either of those.
roy316 said:
Thanks for the reply. But I was told I should use safe strap on another my post when I asked how to flash "danvdh google edition 4.4.2 ROM" with MF3.
Do you mean MF3 can not be flashed to kitkat now?
Sorry for those questions, I searched and found a post with same question but no people answer.
Thanks ain advance!
Click to expand...
Click to collapse
Im on the same boat, wish I could danvdh on my phone. Im rocking a diff Google Play rom and its pretty solid. Its def a 4.2.2 though but solid on battery none the less
DeadlySin9 said:
There is the 4.4 leak, but no root of Safestrap for it yet. You'll have to wait for either of those.
Click to expand...
Click to collapse
Thanks for the reply.
Keep waiting!
DeadlySin9 said:
There is the 4.4 leak, but no root of Safestrap for it yet. You'll have to wait for either of those.
Click to expand...
Click to collapse
Any news now?
Thanks!!!
roy316 said:
Any news now?
Thanks!!!
Click to expand...
Click to collapse
If you want to flash a 4.4 ROM you could update to 4.3 then root and install safestrap. Safestrap still doesn't work with ROMs that aren't Touchwiz based. If you need the 4.3 MK2 tar, you can download it here http://www.mediafire.com/download/ktkoogwz562p64k/2400258.zip
Sigatorade said:
If you want to flash a 4.4 ROM you could update to 4.3 then root and install safestrap. Safestrap still doesn't work with ROMs that aren't Touchwiz based. If you need the 4.3 MK2 tar, you can download it here http://www.mediafire.com/download/ktkoogwz562p64k/2400258.zip
Click to expand...
Click to collapse
Thank you for the reply.But I am not quite understood.
Do u mean I can do 4.2 -> 4.3 (root and install safestrap) -> 4.4?
I am now on MF3 version (ATT), 4.3 MK2 is work?
roy316 said:
Thank you for the reply.But I am not quite understood.
Do u mean I can do 4.2 -> 4.3 (root and install safestrap) -> 4.4?
I am now on MF3 version (ATT), 4.3 MK2 is work?
Click to expand...
Click to collapse
If you want to flash a 4.4 ROM you could go 4.3,root, install safestrap,4.4 ROM. The compatible 4.4 ROMS are here: http://forum.xda-developers.com/showthread.php?p=51130834
Currently have a AT&T S4 rooted with MDL firmware. I have flashed other 4.3 loki roms without any problems (using Goldeneye 20 now). From the reading that I have done on the forums, it is my understanding that certain roms require a newer firmware version, for example, Hyperdrive. Is that a correct statement? If so, will that continue to be the trend with later releases? Can anyone provide any additional information to help me understand this better? Thanks in advance!
beefwilliams said:
Currently have a AT&T S4 rooted with MDL firmware. I have flashed other 4.3 loki roms without any problems (using Goldeneye 20 now). From the reading that I have done on the forums, it is my understanding that certain roms require a newer firmware version, for example, Hyperdrive. Is that a correct statement? If so, will that continue to be the trend with later releases? Can anyone provide any additional information to help me understand this better? Thanks in advance!
Click to expand...
Click to collapse
For MDL, that does not apply. Basically people with MF3+ phones need to upgrade to 4.3 to have 4.3 ROMs. All you need to do is continue to use loki and never upgrade your bootloaders.
DeadlySin9 said:
For MDL, that does not apply. Basically people with MF3+ phones need to upgrade to 4.3 to have 4.3 ROMs. All you need to do is continue to use loki and never upgrade your bootloaders.
Click to expand...
Click to collapse
Unless he wants a 4.4.2 rom then he needs the new bootloader....which is locked! so stay away of 4.4.2 for now
Flashing roms (unless stated by OP) will not update your bootloader correct? Since I am one of the lucky ones to have the MDL, I don't want to jeopardize it.
daraj said:
Unless he wants a 4.4.2 rom then he needs the new bootloader....which is locked! so stay away of 4.4.2 for now
Click to expand...
Click to collapse
Not true, he can flash a 4.4.2 ROM with the MDL bootloader as long as he gets a loki 4.4.2 kernel. Otherwise the 4.4.2 Google Edition thread wouldn't get much attention
beefwilliams said:
Flashing roms (unless stated by OP) will not update your bootloader correct? Since I am one of the lucky ones to have the MDL, I don't want to jeopardize it.
Click to expand...
Click to collapse
Flashing ROMs will not touch your bootloaders. Just never take any OTA updates to the stock ROM, and never ODIN any firmware except MDL. OTA updates on custom ROMs will only work in some cases (GE doesn't because they're ported from a different model, Hyperdrive will because it has a specialized system).
I'm MDL on 4.2.2, how did you upgrade to 4.3 but keep your MDL?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Wittyusernametaken said:
I'm MDL on 4.2.2, how did you upgrade to 4.3 but keep your MDL?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
You can use the StockUp ROM, it's just MK2 with bloat removed and you can even flash the bloat back on if you want.
DeadlySin9 said:
You can use the StockUp ROM, it's just MK2 with bloat removed and you can even flash the bloat back on if you want.
Click to expand...
Click to collapse
Interesting yeah, no bloat love here, I've got a metric ton of it frozen with Titanium. I was thinking that the only thing I could try was http://forum.xda-developers.com/showthread.php?t=2356276 . I haven't actually flashed any roms yet, only rooted and have twrp. Thank you for the info
I'm on MDL firmware (AT&T) running Hyperdrive RSL13 with KTs kernel. I've had 4.2.2 and 4.4.2 roms on this phone. You can bounce around with no problem. My recovery auto lokis...using shabby penguins recovery.
Hi all! I'll start by saying this, I'm not a COMPLETE noob here. I have had a fair share of experience with rooting and flashing roms; However when i got my new S4 i stepped up in the world of android and am sorta lost now lol. Currently I'm stock MF3 with AT&T, and in a bit I will flash the MK2 update.zip and root then. Well, my understanding of SafeStrap is that it uses the phones memory to make virtual slots for roms, therefor (correct me if I'm wrong) the current system doesn't get wiped. Now I have searched, searched, searched, read, read, AND read, multiple threads trying to find my answers and I've just ended up with confusuion. If my understanding off SS is correct I want a rom that is Stock 4.4.2, Fast, battery enhancing, and most importantly Stable. I saw on in Particular that stood out to me and that was Vision-X but the post to me confused me whether i could use it on the NB1 build. Another question I have: Is NC1 worth it? I've seen that I could do a work around to keep root from NB1 and go to NC1, And Finally my last question (thus far): Can I flash themes i whip up myself with Universal online Theme Kitchen? Is that compatible? I hope that the XDA community can help me once again with my questions and guide me onto the right track. Thanks in advance XDA!!!
DroidWizzy said:
Hi all! I'll start by saying this, I'm not a COMPLETE noob here. I have had a fair share of experience with rooting and flashing roms; However when i got my new S4 i stepped up in the world of android and am sorta lost now lol. Currently I'm stock MF3 with AT&T, and in a bit I will flash the MK2 update.zip and root then. Well, my understanding of SafeStrap is that it uses the phones memory to make virtual slots for roms, therefor (correct me if I'm wrong) the current system doesn't get wiped. Now I have searched, searched, searched, read, read, AND read, multiple threads trying to find my answers and I've just ended up with confusuion. If my understanding off SS is correct I want a rom that is Stock 4.4.2, Fast, battery enhancing, and most importantly Stable. I saw on in Particular that stood out to me and that was Vision-X but the post to me confused me whether i could use it on the NB1 build. Another question I have: Is NC1 worth it? I've seen that I could do a work around to keep root from NB1 and go to NC1, And Finally my last question (thus far): Can I flash themes i whip up myself with Universal online Theme Kitchen? Is that compatible? I hope that the XDA community can help me once again with my questions and guide me onto the right track. Thanks in advance XDA!!!
Click to expand...
Click to collapse
You don't have to upgrade past MK2, and it doesn't matter if you're just going to put a custom ROM on. I believe the ROM you mentioned is compatible, but you could always check the All Things MK2 & NB1 thread. With safestrap on MK2 you'll be able to run both 4.3 and 4.4.2 ROMs by using Om ODIN to switch kernels. As for themes, Safestrap allows all normally flashable zips, so it's a matter of whether the kitchen is compatible.
Thanks for the reply! Currently im Stock NB1 and rooted. I'm going to flash Skyfall.Ill see what happens.
Edit: Flashed Skyfall but for some reason after reboot i get stuck on the Samsung splash screen. I followed the installation guide, am i missing something?
Since i didn't update my bootoader when using the keep root method to NB1 i used Odin to get back to stock MK2. Which SS version should i use to try and flash skyfall?
So I've got a Verizon Note 3 running android 4.3 rooted with supersu + busybox, decent amount of samsung bloatware disabled. I am wondering for starters if I were to install safestrap if I can just keep the way it currently is and then use a rom slot for any roms or should I factory wipe the stock slot, install 4.4.2 via odin then root via towelroot and then install safestrap and rom from that or what method should I take? Is it possible to use the ROM slots on the VZN3? I watched a few youtube videos and they were all factory resetting the stock slot and installing it there but I'd love to be able to just keep my current setup as is since it'd be a guranteed fallback. In case this doesnt make sense just respond as to what needs clarification and i'll respond in less than 5 minutes.
You can use only the jelly bean roms while on jb. Follow the instructions to use a kitkat rom in each roms op. You have to odin the kernal. You will retain root if following them. You dont need to use towelroot.
So can i just do a rom slot or do I have to upgrade to kit kat? What do you mean by odin the kernel?
Its really to much to explain… you probably really have to do some read up on odin software and kernels before you attempt to do anything on your phone cause no one is responsible but you… So please google search how to odin or how to flash a unified kernel NC2 or NC4… Nc2 is a older but more versatile kernel of 4.4.2 and Nc4 is the lastest kernel likely the one that your on now go to about phone and look under Baseband Version yours should say NC4 the last 3 character
waco2hot33 said:
Its really to much to explain… you probably really have to do some read up on odin software and kernels before you attempt to do anything on your phone cause no one is responsible but you… So please google search how to odin or how to flash a unified kernel NC2 or NC4… Nc2 is a older but more versatile kernel of 4.4.2 and Nc4 is the lastest kernel likely the one that your on now go to about phone and look under Baseband Version yours should say NC4 the last 3 character
Click to expand...
Click to collapse
Seems like saying kernel is unnecessary, isn't this just flashing the .tar or whatever format it is to the phone using odin, i've already done that. I just need to upgrade to NC4? No one is answering the question of whether i can just use the rom slots and keep the stock slot active on MJE.
Xproplayer said:
Seems like saying kernel is unnecessary, isn't this just flashing the .tar or whatever format it is to the phone using odin, i've already done that. I just need to upgrade to NC4? No one is answering the question of whether i can just use the rom slots and keep the stock slot active on MJE.
Click to expand...
Click to collapse
Once you upgrade to KK your MJE roms won't work so if you have a real love for a particular MJE rom stay on MJE. On KK and the updated safestrap rom slots work but with mixed results, some people have no problems and other roms in slots other than stock have seen performance issues.
You only need the NC2 kernel if you took the NC4 OTA, if you upgrade via this method you don't have to worry about it.
See here : http://forum.xda-developers.com/showpost.php?p=55241731&postcount=2
waco2hot33 said:
Its really to much to explain… you probably really have to do some read up on odin software and kernels before you attempt to do anything on your phone cause no one is responsible but you… So please google search how to odin or how to flash a unified kernel NC2 or NC4… Nc2 is a older but more versatile kernel of 4.4.2 and Nc4 is the lastest kernel likely the one that your on now go to about phone and look under Baseband Version yours should say NC4 the last 3 character
Click to expand...
Click to collapse
thegamerdarkseid said:
Once you upgrade to KK your MJE roms won't work so if you have a real love for a particular MJE rom stay on MJE. On KK and the updated safestrap rom slots work but with mixed results, some people have no problems and other roms in slots other than stock have seen performance issues.
You only need the NC2 kernel if you took the NC4 OTA, if you upgrade via this method you don't have to worry about it.
See here : http://forum.xda-developers.com/showpost.php?p=55241731&postcount=2
Click to expand...
Click to collapse
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Xproplayer said:
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Click to expand...
Click to collapse
No that can't happen unless there's something huge that I don't know about. They are different firmwares. But if you do the rooted upgrade you can go back if you prefer ME, if you do the OTA there's no going back to MJE.
Xproplayer said:
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Click to expand...
Click to collapse
No that can't happen unless there's something huge that I don't know about. They are different firmwares. But if you do the rooted upgrade you can go back if you prefer ME, if you do the OTA there's no going back to MJE.
Xproplayer said:
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Click to expand...
Click to collapse
Xproplayer said:
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Click to expand...
Click to collapse
No that can't happen unless there's something huge that I don't know about. They are different firmwares. But if you do the rooted upgrade you can go back if you prefer ME, if you do the OTA there's no going back to MJE.
Xproplayer said:
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Click to expand...
Click to collapse
currently the only rom that runs with the NC4 kernel is jasmine.
the_rooter said:
currently the only rom that runs with the NC4 kernel is jasmine.
Click to expand...
Click to collapse
Are you sure? I was looking at alliancerom and it says NC4 4.4.2 in the name...
http://forum.xda-developers.com/showthread.php?t=2553357
Xproplayer said:
Are you sure? I was looking at alliancerom and it says NC4 4.4.2 in the name...
http://forum.xda-developers.com/showthread.php?t=2553357
Click to expand...
Click to collapse
Yes Alliance is nc2 kernel but it'll be nc4 next build..... http://forum.xda-developers.com/showthread.php?p=55373385
thegamerdarkseid said:
Yes Alliance is nc2 kernel but it'll be nc4 next build..... http://forum.xda-developers.com/showthread.php?p=55373385
Click to expand...
Click to collapse
Do you happen to know about hyerdrive, and just to clarify i should be able to flash nc2 to my vzn3 and then install alliance over it
Both are possible; I did the latter. ROM slots do not work with SS 3.72 and above (the one you will need if you are running kit Kat). You can only flash ROMs to the stock slot, so make a nandroid first!
If you decide to stay on JB and SS 3.71, you can definitely keep a stock ROM in the stock slot and install another ROM on a custom ROM slot. Hope I could help.
Sent from my GT-I9505G using Tapatalk
---------- Post added at 07:38 AM ---------- Previous post was at 07:32 AM ----------
Actually since you're on note 3 you may need SS 3.75 if you're going to flash kit Kat Roms. If you have any questions feel free to email me. And yes Hyperdrive is an extremely popular TW ROM. Just make sure whatever android version you are on, flash a compatible ROM.
Sent from my GT-I9505G using Tapatalk
marbertshere said:
Both are possible; I did the latter. ROM slots do not work with SS 3.72 and above (the one you will need if you are running kit Kat). You can only flash ROMs to the stock slot, so make a nandroid first!
If you decide to stay on JB and SS 3.71, you can definitely keep a stock ROM in the stock slot and install another ROM on a custom ROM slot. Hope I could help.
Sent from my GT-I9505G using Tapatalk
---------- Post added at 07:38 AM ---------- Previous post was at 07:32 AM ----------
Actually since you're on note 3 you may need SS 3.75 if you're going to flash kit Kat Roms. If you have any questions feel free to email me. And yes Hyperdrive is an extremely popular TW ROM. Just make sure whatever android version you are on, flash a compatible ROM.
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
its actually ss 3.75 B04
So does anyone know about hyperdrive? I looked all over the thread and couldn't find anything..
Xproplayer said:
So does anyone know about hyperdrive? I looked all over the thread and couldn't find anything..
Click to expand...
Click to collapse
What do you want to know about Hyperdrive? If you're on NC4 and you want to run Hyperdrive you'll have to flash the NC2 kernel after flashing the rom or it won't boot. Just flash the rom in safestrap and when you're done flashing use safestrap to boot into download mode and flash NC2 kernel in Odin in the AP slot. In all honesty I'd look into flashing @hsbadr unified kk firmware and then you could run any rom in this forum without worrying about flashing the NC2 kernel. I've done it and been able to bounce from rom to rom without any issues....
thegamerdarkseid said:
What do you want to know about Hyperdrive? If you're on NC4 and you want to run Hyperdrive you'll have to flash the NC2 kernel after flashing the rom or it won't boot. Just flash the rom in safestrap and when you're done flashing use safestrap to boot into download mode and flash NC2 kernel in Odin in the AP slot. In all honesty I'd look into flashing @hsbadr unified kk firmware and then you could run any rom in this forum without worrying about flashing the NC2 kernel. I've done it and been able to bounce from rom to rom without any issues....
Click to expand...
Click to collapse
I'm currently on 4.3 MJE, could you send some links on this unified, the only two roms I'm currently interested in are Hyperdrive and Alliance but I've been told each one has to be flashed onto specific roms etc etc.
Xproplayer said:
I'm currently on 4.3 MJE, could you send some links on this unified, the only two roms I'm currently interested in are Hyperdrive and Alliance but I've been told each one has to be flashed onto specific roms etc etc.
Click to expand...
Click to collapse
Here's the link to the post look in Downloads. RE is for retail edition and DE is for Dev Edition. Don't flash the wrong one or you could brick your phone. The unified firmware is flashed in Odin in the AP slot and once you flash it you can jump from rom to rom without worrying about the NC2 kernel but since you're on MJE you'll need to do the KK upgrade before flashing unified firmware. See quote in red at the bottom of the Downloads section!! I don't want you to get the wrong impression as I'm not yelling at you or anything bro, I don't want anyone bricking their device....
Link to firmware : http://forum.xda-developers.com/showpost.php?p=52860439&postcount=1
Links for all other things : http://forum.xda-developers.com/showpost.php?p=55241731&postcount=2