I could not find a solid answer on this.
I know that MHL 2.0 puts out 900ma but my question is, how well does the charge? Does it keep it powered and charging? I had issues where my MHL adapter didnt charge it at all. I am asking only about the official MHL adapter.
The official Samsung mhl? I have the Samsung and it does charge depending what u use. I can plug the usb right into my cable box and the charging sucks..If I plug it into the wall adapter it does ok.. basically it charges very slowly when plugged in streaming a movie..
P2o8wer said:
The official Samsung mhl? I have the Samsung and it does charge depending what u use. I can plug the usb right into my cable box and the charging sucks..If I plug it into the wall adapter it does ok.. basically it charges very slowly when plugged in streaming a movie..
Click to expand...
Click to collapse
I agree. I have the Samsung official one I tried other brands and did not work at all. It does not over-charge like what I expected of a car charger. One night I was low in power watching a movie and the phone died...but it was charging and I always use the wall charger. I had to let the phone get up some percentage before I could go back to the movie.
So Now I make sure I am above 50% but if watching a 90min movie say at 50% & charging thur the MHL I will be at between 35-45% when done. With the screen being on, on the phone I would call this good the screens burn a lot of juice.
For anyone doing what I wanted, connecting to their car pioneer radio with the most flexibility...I bought a PTV3000 from netgear, has worked with all my devices (Motorola and Samsung). I got it for 58 bux after tax at staples with a 10% off coupon. Is it the best for fast moving things? no, but I don't use it for that either! It's my GPS and music for trips. It is a bit laggy, but overall great experience.
PS: I also had the Wireless Hub and that worked great too, but only on Samsungs.
Related
what car chargers will work with our phone? I saw someone had used a charger from a razr, but when I went to the store to check them out, the usb cable wouldn't fit, and I wasn't going to try to for the thing on there. Any ideas please?
I use a mini USB cable to the phone with a usb car charger.
You should look again. I use 2 old Razr chargers (1 home & 1 car) and they both fit perfectly. My old Htc diamond and touch pro chargers work too.
ryan5943 said:
You should look again. I use 2 old Razr chargers (1 home & 1 car) and they both fit perfectly.
Click to expand...
Click to collapse
Depends on what razr you had. I think they changed the port to a micro usb in one version.
Like railstop said, find a GENERIC USB car charger. If you can find one that is just the car charger plug with USB port(rather then a non-detachable cord) then that is even better b/c you can plug any usb cable into it. USB A -> mini .... USB A -> micro ... USB A -> iPod
It doesn't matter. If you get the generic then you can also plug in any device that will charge off your computer.
If the charger is marked 1 A, it'll charge faster. Some of the mini USB chargers, for phones or BT headsets only charge at 300mAh or 700mAh. They'll charge, eventually, but a lot slower.
smarcin said:
If the charger is marked 1 A, it'll charge faster
Click to expand...
Click to collapse
Good point. Some devices(not the hero) will complain that the charger is not compatible but 95% of them will still charge. They just throw up that warning b/c they will charge slower.
If you are constantly using GPS then you will want to hunt around for a 1 amp version because even with a 1A charger the hero's battery can't keep up with the drain of GPS and data for the navigation.
I too am using an old Moto car charger(not Razr). Just look for any USB mini car charger, don't get suckered into Sprint approved accessories. If you have an extra miniUSB cable, it may be better to get a generic USB car charger, so you can switch out when you get a new phone.
centran said:
Good point. Some devices(not the hero) will complain that the charger is not compatible but 95% of them will still charge. They just throw up that warning b/c they will charge slower.
If you are constantly using GPS then you will want to hunt around for a 1 amp version because even with a 1A charger the hero's battery can't keep up with the drain of GPS and data for the navigation.
Click to expand...
Click to collapse
i went out and bought a generic moto charger that has the different adaptors on it, but it's charging slow as ****, to the point of pretty much not even seeming to charge. I also had a griffin usb charger that was doing the same thing. :grr:
Could a charger above 1000mA damage the phone? I have two gps mini-usb car chargers rated for 1500mA and 2000mA.
vashing said:
Could a charger above 1000mA damage the phone? I have two gps mini-usb car chargers rated for 1500mA and 2000mA.
Click to expand...
Click to collapse
No it wont matter. The phone will just draw 1 amp, the ratings are just maximums.
abr27440 said:
No it wont matter. The phone will just draw 1 amp, the ratings are just maximums.
Click to expand...
Click to collapse
Thank you.
Any risk in using a different charger than the original samsung one to charge the sgs2?
I use a combination of blackberry charger at work, universal micro usb charger downstairs at home, universal car charger and official charger upstairs.
Any concerns with this?
I've been doing that for ages. I use the droid, SE x10 and iPhone chargers with no issue.
As always YMMV
I am using htc's charger which has a higher rating than samsung charger. No problem at all...
Sent from my GT-I9100 using Tapatalk
I use a Sony charger to charge my S2 , I have not even removed the Samsung one from the box , As long as you use a branded charger will be fine.
I've tried to use Nokia's 1200 mA charger, It did charge the phone but whenever i connected that charger the phone would slow down terribly. So, whatever you use, try to keep it around Samsung's charger's 700 mA.
Ive found that the standard charger is rubbish! I had my galaxy s 4 month and it broke, my wifes galaxy 3 did same and now i dont even bother with the one out the box, just use the usb cable and the adapter i got with my tab.
Sent from my SGS2 via XDA App
[email protected] said:
Ive found that the standard charger is rubbish! I had my galaxy s 4 month and it broke, my wifes galaxy 3 did same and now i dont even bother with the one out the box, just use the usb cable and the adapter i got with my tab.
Sent from my SGS2 via XDA App
Click to expand...
Click to collapse
Absolutely right...my phone is about 1 month old..and the official samsung charger is already broken..not charging anymore..i guess there is an internal wire breakage at the flexible point of the charger becoz when i shake the wire at that point it starts charging intermittently..
Sent from my GT-I9100 using Tapatalk
I use my Kindle charger any micro usb charger will be fine.
Sent from my GT-I9100 using XDA App
iznee said:
Absolutely right...my phone is about 1 month old..and the official samsung charger is already broken..not charging anymore..i guess there is an internal wire breakage at the flexible point of the charger becoz when i shake the wire at that point it starts charging intermittently..
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Same here. I tried all sorts to get it to work with no joy. I now have 3 duff samsung chargers that are potentially a fire hazard if left plugged in! Tempted to email samsung and raise this concern.
Sent from my SGS2 via XDA App
At home I use a Lenmar AC-to-USB 1A charger I picked up at Fry's for around $10; in the car I use a 1A Cygnett 12V-to-USB charger, also from Fry's. Both charge the device at least as well as the OEM AC charger; the car charger appears to charge the SGS2 even when I'm running CoPilot Live.
I use the iGO charge anywhere.
It's a tad pricey, but since the GS2 battery life isn't great (my only complaint on the phone), the charger is great for it since it has an internal battery that charges up when you put it in an outlet so you can charge the phone without needing an outlet. Great for in school or walking around, just put it in my bag and press the button and it charges.
I'm using my BlackBerry charger with no issues, I just do it for convenience as the charging time is the same as the standard charger.
Cheers for the replies, you have put my worried little mind at ease!
daz_2000 said:
Cheers for the replies, you have put my worried little mind at ease!
Click to expand...
Click to collapse
+1 .Just used the charger from a different brand and no bad feelings while using it
well, i just emailed samsung raising my concerns regarding the faulty chargers... see what they come back with....
Guys have you noticed any change in response when we plug in another charger?
I have been using the HTC charger, 200 mA (input), Output 5V --> 1A.
Whenever i connect my phone to charge and try to work on it, i see my screen lag terribly. Haven't tried it with the supplied charger though due to the low voltage that came with it.
I know i would be wrong, but wanted to check with the experts on this forum...
maddesire said:
Guys have you noticed any change in response when we plug in another charger?
I have been using the HTC charger, 200 mA (input), Output 5V --> 1A.
Whenever i connect my phone to charge and try to work on it, i see my screen lag terribly. Haven't tried it with the supplied charger though due to the low voltage that came with it.
I know i would be wrong, but wanted to check with the experts on this forum...
Click to expand...
Click to collapse
i am using the htc charger that came with the desire hd...no issues what so ever...screen response while charging is the same on or off the charger.
maddesire said:
Guys have you noticed any change in response when we plug in another charger?
I have been using the HTC charger, 200 mA (input), Output 5V --> 1A.
Whenever i connect my phone to charge and try to work on it, i see my screen lag terribly. Haven't tried it with the supplied charger though due to the low voltage that came with it.
I know i would be wrong, but wanted to check with the experts on this forum...
Click to expand...
Click to collapse
200ma is way low, less than half the 500 ma usb standard. Get a new charger. Most of the chargers you are going to see will be 500 ma I would go with double that.
Some (bad?) chargers will disable touchscreen
I have a couple of usb-chargers off ebay and they give some trouble.
When connected, the touchscreen will not work anymore.
This is mentioned in the manual btw.
Guess the SII is a little sensitive.
Yeah, ebay chargers are a crapshoot. Head to walmart or similar and read the power specs, get something that puts out 5v at 1A LPS. This will charge much faster than the often usb based standard 500 mA chargers and the battery will not be harmed at that charging level which is what many stock HTC chargers put out nowdays. Do not get anything less than 500mA, this is the usb standard and works but will be slower to charge. El Cheapo no name chargers on ebay and such may have the spec but may or may not actually put out the juice. You can usually tell this because the phone will have problems like the ones mentioned right here. The stock charger does not put out any special juice, juice is juice. If a charger puts out to spec the phone will work while charging.
Ive noticed the stock wall charger delivered with the Nexus 4 is rated at 1.2A, 5.0V. My old phone had a micro usb charger at 0.8A, 5.0V. I imagine the N4 will charge on the lower rated charger, but would take longer. Isnt the standard usb rated at 0.5A? My desktop PC has a new Asus board that has the Charge+ 3X Faster Charging, which I would guess means the usb can pump out power at 1.5A. Looking around for a car charger and additional wall charger, I imagine the N4 would be fine with a higher and lower rated charger? Or should I stick with 1.2A or less? Ive seen car chargers at 1.0A, 2.1A, and 3.0A.
the n4 will only take the current that it needs. a higher Amps- rated charger won't hurt it.
i use a 2.5A portapow quad output charger, the extra power of which enables the charging of multiple devices simultaneously.
I bought this charger for s2 when I had it.. and sold the phone immediately. However I still have this charger. Now what I want to do is, keep one charger (stock) at home and the other (Nokia one...which is also Original) at my workplace. I want to know, is it compatible? As the manual say, u shouldn't use 3rd party chargers. So I want to know your expert opinions "before" start using it on N4.
Thank you
I use my old blackberry + LG car charger
^ You think this would go fine with my N4?
The Output/Input is all same.. only 160 mA is diffrent from the Stock charger. So I don't really know.
filthykid said:
^ You think this would go fine with my N4?
The Output/Input is all same.. only 160 mA is diffrent from the Stock charger. So I don't really know.
Click to expand...
Click to collapse
I charge mine from an HTC wall to usb plug, then to a thermaltake usb extender, then to a random usb to micro cable I found so it can reach to my bed so I can listen to music in bed after I fap.
lol..
It appears like Samsung's Adaptive Fast Charge is in fact an equivalent of Quick Charge 1.0 but not Quick Charge 2.0.
Samsung's adapter outputs either 5V or 9V:
http://www.samsung.com/us/support/faq/FAQ00071944/98120/SM-N910PZKESPR
Quick Charge 2.0 outputs 5V, 9V and 12V. It is confirmed by this photo of Motorola's Turbo Charger as well as exemplary page of some OEM quick charge 2.0 adapter:
http://auonlineshop.kddi.com/disp/CSfLastGoodsPage_001.jsp?GOODS_NO=4528&dispNo=001001002
Just a guess but I expect your need a bigger battery, like that in a tablet, to handle charging at 12 volts. As it is, I'm blown away by how fast this phone charges on the adaptive charger. Just wish I could get one for the car.
rcobourn said:
As it is, I'm blown away by how fast this phone charges on the adaptive charger. Just wish I could get one for the car.
Click to expand...
Click to collapse
I couldn't agree more :highfive:
Yep, its a beast at charging, according to PhoneArena it remains the fastest charging phone around, so its Adaptive Fast Charging is doing an incredible job!
My concern would be what it does to battery life..can't help but think the lifespan of the battery will take a hit using fast charging all the time.
rcobourn said:
Just wish I could get one for the car.
Click to expand...
Click to collapse
You could always buy a car power inverter and use the fast charging adapter with that.
railshot said:
You could always buy a car power inverter and use the fast charging adapter with that.
Click to expand...
Click to collapse
My car has an a/c outlet; the real problem is just finding stock on the adaptive charger. Even then, don't much want a cord running to outlet in back seat. As for using an inverter.. D/C ports are in awkward places to use one in Explorer. Will make due until auto version is available.
Guys does anyone know if the below accessory is real?
Samsung Qualcomm Quick Charge 2.0 USB Car Charger [Part No: ECA-P20CWE]
Not sure if this is real as this is the only website that stocks this 'Samsung branded' charger. A google search shows similar items on Alibaba so I'm guessing this is fake.
Anyway I am going to buy this:
rcobourn said:
Just a guess but I expect your need a bigger battery, like that in a tablet, to handle charging at 12 volts. As it is, I'm blown away by how fast this phone charges on the adaptive charger. Just wish I could get one for the car.
Click to expand...
Click to collapse
What do you mean you wish you could get one for your car? There are plenty of compatible models available for your car. This one has 1 quick/fast charge port and 3 regular 5v 2.4amp ports.
http://www.amazon.com/Intelligent-C...d=1428955440&sr=1-5&keywords=quick+charge+2.0
bnl552 said:
What do you mean you wish you could get one for your car? There are plenty of compatible models available for your car. This one has 1 quick/fast charge port and 3 regular 5v 2.4amp ports.
http://www.amazon.com/Intelligent-C...d=1428955440&sr=1-5&keywords=quick+charge+2.0
Click to expand...
Click to collapse
You are quoting a post from last October. Things have changed.
2.0 works the same?
I am planning a 900 mile hike and need to minimize weight since I will be bringing filming gear. I have purchased a light weight plug strip with Quick Charge 2.0 USB ports. Will this work the same as the Adaptive Fast charger for my Note Edge? Or will I still need to bring the little white USB/AC plug thingy?
Thanks!
Guess I'll find out when the plug strip arrives.
light weight plug strip (http://www.amazon.com/BESTEK-2-Outl...&redirect=true&ref_=oh_aui_detailpage_o00_s00)
Power Device: (http://www.amazon.com/Generator-Eme...&redirect=true&ref_=oh_aui_detailpage_o06_s00)
lustyffh said:
It appears like Samsung's Adaptive Fast Charge is in fact an equivalent of Quick Charge 1.0 but not Quick Charge 2.0.
Samsung's adapter outputs either 5V or 9V:
http://www.samsung.com/us/support/faq/FAQ00071944/98120/SM-N910PZKESPR
Quick Charge 2.0 outputs 5V, 9V and 12V. It is confirmed by this photo of Motorola's Turbo Charger as well as exemplary page of some OEM quick charge 2.0 adapter:
http://auonlineshop.kddi.com/disp/CSfLastGoodsPage_001.jsp?GOODS_NO=4528&dispNo=001001002
Click to expand...
Click to collapse
Hello XDA members,
I would like to ask you if you know a if it is possible to charge my Nexus 6P with the usage of my USB 3.0 OTG Cable and a Male-to-Male classic USB 2.0 Cable ...
At the moment my phone is charging with 0.2A maximum, even with a 2A wall charger ...
The only working charger is my classic Nexus 6P TypeC-TypeC ..
Have a nice day,
George.
I don't know about the first part of your question regarding the OTG cable, but can say that any compliant USB-A cable is limited to 2.4A in the absolute best of conditions. You may find an answer in the Accessories sub-forum where most of the charger and cable discussions are.
When you say your phone is charging at 0.2A using a 2A wall charger, that may be normal. Are you measuring the input current when the battery is completely dead, or closer to full? The phone itself limits the charging current by it's built-in charging profile, so it will only accept full charging from 0-40% then taper off to zero as it approaches being fully charged. See the 6P charging graph. Even with the stock USB-C to USB-C 3A charger, you're only getting less than 0.2A amp during the last 10% of charging. Not only that, but the phone keeps accepting even less current for almost an hour past 100%.
Here's a solution for my problem, first let me you clear the problem/ my case:
I want to use my Nexus 6P as a Android desktop computer.
I already found a way to charge and use multiple USB devices (using a USB hub)
for more info check out General Section I have posted a guide so you can do it too.
I also bought a chromecast because sadly we cannot use HDMI, there is no DisplayPort on our Nexus 6P.
Everything were working perfectly except the fact that my phone was discharging, while actually charging with a 2.0A USB 2.0 wall charger.
Here is the solution:
FInd a way to power up a 16V case fan (those fans that are a inside your desktop case) and make a stand for your phone, COOL YOUR SNAPDRAGON BABY!
Phone is still charging slowly, while the temperature is at 24Celsius stabilised!
Have a nice day,
Have fun with this it is suuuper cool gadget-like creation if you consider doing it too,
George.