Hi guys,
Have some of the dialer codes been disabled in Omni / KK ? I wanted to access the service menu *#*#0011#*#* but it didn't work. After completing entry of the code it disappears to suggest it was recognised but nothing happens. I wanted to check the operating band after flashing a new baseband, process is described at android forums here:
HOW TO: Enable 850Mhz 3G Network Frequency on your Samsung i9000 Galaxy S
I have done this prior to Omni & KK so I know the process works.
I checked a few other codes from here:
Samsung Secret Codes + Volume Boosting
Galaxy S II Bible: Complete reference
Of the codes I tried only *#06# for IMEI worked.
Have some of the codes been disabled or removed ? Is there a setting somewhere I haven't stumbled across ?
I'm using the international SGS2 i9100
Thanks,
Michael
Actually, we just never got around to reimplementing them (SamsungServiceMode)
There are some patches on Gerrit to bring SSM back. They should hopefully go live by the end of this weekend.
Yep that will do it ! Thanks for the feedback. No rush I was just curious.
FrodgE said:
Yep that will do it ! Thanks for the feedback. No rush I was just curious.
Click to expand...
Click to collapse
whoops didn't get around to it again... turned out to be a really crappy weekend.
All good, no stress. It sounds like all the more reason to kick back and unwind with a stiff drink rather than stare at lines of code.
FrodgE said:
All good, no stress. It sounds like all the more reason to kick back and unwind with a stiff drink rather than stare at lines of code.
Click to expand...
Click to collapse
Yeah, although it SHOULD be merged in tonight's nightly now.
Entropy512 said:
Yeah, although it SHOULD be merged in tonight's nightly now.
Click to expand...
Click to collapse
You da man ! All sorted, works perfectly. Thanks for your hard work.
FrodgE said:
You da man ! All sorted, works perfectly. Thanks for your hard work.
Click to expand...
Click to collapse
May i ask, what modem you're using? I have an SGS 2 with XXMS2, tried some of the codes (*#1234#, *#9900#), but i only get the error message in the attachment.
Translated to english this means: Connection error or invalid MMI code.
Any ideas?
Perhaps I spoke too soon ? I must admit I only tried the service mode codes *#*#197328640#*#* and *#*#0011#*#*. I can't get codes *#1234# or *#9900# to work either but interestingly I don't get an error message like you do, it just doesn't do anything.
I'm using XXMS4 which I *think* is the latest modem for the i9100. Is it possible different modems affect what codes are available ? I had assumed the codes were handled by the ROM/kernel rather than the modem.
FrodgE said:
Perhaps I spoke too soon ? I must admit I only tried the service mode codes *#*#197328640#*#* and *#*#0011#*#*. I can't get codes *#1234# or *#9900# to work either but interestingly I don't get an error message like you do, it just doesn't do anything.
I'm using XXMS4 which I *think* is the latest modem for the i9100. Is it possible different modems affect what codes are available ? I had assumed the codes were handled by the ROM/kernel rather than the modem.
Click to expand...
Click to collapse
I tried now *#*#197328640#*#* and *#*#0011#*#* and those are working for me, too. But not the other two.
Related
hai
i have imported a galaxy S from the US to europe.
but i cant unlock it!
i only get the mcc/mnc lock
Opening file <.\nv_data.bin>...
Searching code block...
Found.
Searching codes...
MCC/MNC lock : 00101
i have try all medleys that i can find here and now i dont know the way out of my problem
yesterday i post in the captivate forum, but nobody rly can help me or give me some tipps, i hope here is someone who can help me. plz excuse the doublepost (captivate and here) but i am rly helpless!
i will donate someone who can give me my unlock code! plz let me know if there is anybody who can do it...!
my way of bloody frustration today:
-at first i flash roms from the i9000 (jm8)
-than the captivate-stock kernel
-root
-first try with the unlock tool (sgux.exe)
-flash jm7 with captivate-stock kernel (repati + efs clear with 512 pin)
-next try with unlock tool
-flash jm6, try unlock, flash jh7, try unlock, flash jf6, try unlock
-flash with odintool "I897UCJF6-final-OCD-REV0"
-try unlock
try update with kies and "regedit" trick in all medleys
i try also the two galaxy unlock apps there i find in the market:
"sgs unlock" > sorry no codes found unknown error
and "unlock galaxy" > unlock code: FFFFFFFF unfreeze code: not found
How is your phone locked?
*#7465625#
TDO said:
How is your phone locked?
*#7465625#
Click to expand...
Click to collapse
netlock only (the first [ON])
remaining options are [OFF]
have a idea? <3 <3 <3
...i become desperate soon
many thx
the same for me!!
H03! said:
netlock only (the first [ON])
remaining options are [OFF]
have a idea? <3 <3 <3
...i become desperate soon
many thx
Click to expand...
Click to collapse
Ah now I see you flashed your phone to "death". It seems your nv_data.bin is corrupt. If you have no backup you are out of luck. (nv_data.bak or .nv_data.bak)
Here are the instruction how to rebuild your file if you have a bak file.
http://forum.xda-developers.com/showthread.php?p=7946031#post7946031
TDO said:
If you have no backup you are out of luck.
Click to expand...
Click to collapse
for real? i have no backup.. the first that i do is flash a i9000 firmware with an captivate kernel because there was a lot of at&t apps on the phone!
thx for the link, but no success
i order two unlockcodes on trusted websites because i still waiting for a code...
out of luck for real??? because i have my imei number, not the wellknown corrupt one!
H03! said:
for real? i have no backup.. the first that i do is flash a i9000 firmware with an captivate kernel because there was a lot of at&t apps on the phone!
thx for the link, but no success
i order two unlockcodes on trusted websites because i still waiting for a code...
out of luck for real??? because i have my imei number, not the wellknown corrupt one!
Click to expand...
Click to collapse
Please search the forum. There is someone there that can rebuild it for you. I suppose he cannot disclose the method due to the forum policy (something regarding changing/setting IMEI).
There is always a way
If that is not possible, then, there are sites that you can BUY the unlock code for your phone given the IMEI.
nCoder said:
Please search the forum. There is someone there that can rebuild it for you. I suppose he cannot disclose the method due to the forum policy (something regarding changing/setting IMEI).
There is always a way
If that is not possible, then, there are sites that you can BUY the unlock code for your phone given the IMEI.
Click to expand...
Click to collapse
thx =)
i buy a code online, still waiting. hope i get one!
have u guys any references from unlocking websites? i read there a lot of faker and nonprofessional out there!
many thx 4 your time! now im happy because u say "there is always a way".. ;D
H03! said:
thx =)
i buy a code online, still waiting. hope i get one!
have u guys any references from unlocking websites? i read there a lot of faker and nonprofessional out there!
many thx 4 your time! now im happy because u say "there is always a way".. ;D
Click to expand...
Click to collapse
try samfirmware.com
I have the same problem for I9000B in Argentina, I'm missing the .nv_data.bin and the Bak file it's corrupt, Can somebody give a URL to Unlock the Phone. I'm continuos recieving the msg "Put PIN for SIM".
**EDIT
I used this version to recovery the functional operation on my SGS I9000B_JH4_JI3_JH2_JH4_VJ_ARO. Please tell me if you need some more data.
Thanks in advance
Bump.
Thanks a lot XDA for this thread! I'm in the same hole as H03! Currently attempting to rebuild the nv-bak.bak file now... Wish me luck!
did they remove the long task manager app on the initial home screen? I can't see it now after the upgrade.. yey!
you can try this way, I am not sure whether it will work or not.
but if you succeeded, pls share you experience, many thanks
links:
h ttp://forum.xda-developers.com/showthread.php?t=812156
H03! said:
thx =)
hope i get one!
... u say "there is always a way".. ;D
Click to expand...
Click to collapse
Hi
Did U resolve the problem ?
...6 our ago I was in the same point.
Yes, by mistake was flash ( + EFS clean ) and ..00101 was crazy !
But before flash I was have nv_data 40MB after clean only 2MB
And now Phone Works like Fresh New
Use the following code for all devices :laugh:
Activation Code:TP4CF-GK479-Q9Q4Q-WPYRP-7YR4D
thanks brother
Greeting
Enviado desde mi GT-N7000
pdaimatejam said:
Use the following code for all devices :laugh:
Activation Code:TP4CF-GK479-Q9Q4Q-WPYRP-7YR4D
Click to expand...
Click to collapse
Awesome man
Sent from my NexusHD2 using xda premium
pdaimatejam said:
Use the following code for all devices :laugh:
Activation Code:TP4CF-GK479-Q9Q4Q-WPYRP-7YR4D
Click to expand...
Click to collapse
Could Microsoft change the Code? And "deactivate" after some time?
Many thanks for help, and sorry about the bad English....
Cyripper said:
Could Microsoft change the Code? And "deactivate" after some time?
Many thanks for help, and sorry about the bad English....
Click to expand...
Click to collapse
is possible but you simply ask Microsoft for new code
i use my code year and half and countless times flashed many ROM's for testing and code still working...
I think it will become invalid if too many people use it together
I think so, too. The question is, why you couldn`t buy a Code? I know there is no market for that, but I use the code from my HTC 7Pro, but I don`t want to sell it, because the code COULD change. Microsoft should sell it like a Chevron Token or something like that.
why i have code incorrect..
heres mine
India region : CRFV7-X32H9-7QF2Y-CG239-V62YR
enjoy
surya467 said:
here mine
CRFV7-X32H9-7QF2Y-CG239-V62YR
enjoy
Click to expand...
Click to collapse
Thank you for sharing !
I just like to point out that activation codes are location specific. Keep in mind that if you use someone else's code, make sure you have the same country of residence.
I for instance tried surya467's (Thanks for sharing btw) code and it seemed to have locked my phone to India. Several Swedish apps refused to download. Once i got home and entered mine, everything worked fine.
I just like to point out that activation codes are location specific. Keep in mind that if you use someone else's code, make sure you have the same country of residence.
I for instance tried surya467's (Thanks for sharing btw) code and it seemed to have locked my phone to India. Several Swedish apps refused to download. Once i got home and entered mine, everything worked fine.
Click to expand...
Click to collapse
Thanks for the info, i think its better to mention the region of the code so it will be easier for users to pick
Thanks
Thanks for share
invalid activation code
hello all i m staying in india in mumbai n i hve eu htc hd2 i hve used given activation code for this rom 2_HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8858.136 RMT v8.7 bt it is sayin invalid code i hve entered all code in capital letters then also it is invalid ..... plzzz help me i want the market to download the .xap plzzz help n thnks in advance
A new code????
thank
pdaimatejam said:
Use the following code for all devices :laugh:
Activation Code:TP4CF-GK479-Q9Q4Q-WPYRP-7YR4D
Click to expand...
Click to collapse
That Activation Code is Incorrect :crying:
p/s : i'm live in VietNam
Code for HTD2 in Australia
Hi, I tried, but the code doesn't work in Australia. Any suggestions?? Thanks,
sumnermike said:
Hi, I tried, but the code doesn't work in Australia. Any suggestions?? Thanks,
Click to expand...
Click to collapse
guys.... after 10000+ activation did you really expect this code still working?
Microsoft banned him after few days... too much activations with diferent devices...
GET OWN CODE, dont share it, and you will use it forever....
dxdy said:
GET OWN CODE, dont share it, and you will use it forever....
Click to expand...
Click to collapse
How ???
leffep said:
How ???
Click to expand...
Click to collapse
how??? ask microsoft... if you lazy to read forum then simply read install instructions from my signature
Hi, since im new and cannot type in the Development part of this forum, so i try it here
ive been trying out lots of roms lately and the best rom so far to me is NF4 MultiX v2.0 and thanks tkari4 for that.
however when i wanted to go into the samsung phone and pressing *#06# = IMEI Number "secrets/hidden code" or what ever code, its not working.
ive tried replace the secphone.apk with the stock one, but same,
error popup/msg "Connection problem or invalid MMI code.
anyone have a idea what to do?
Righttoknow said:
Hi, since im new and cannot type in the Development part of this forum, so i try it here
ive been trying out lots of roms lately and the best rom so far to me is NF4 MultiX v2.0 and thanks tkari4 for that.
however when i wanted to go into the samsung phone and pressing *#06# = IMEI Number "secrets/hidden code" or what ever code, its not working.
ive tried replace the secphone.apk with the stock one, but same,
error popup/msg "Connection problem or invalid MMI code.
anyone have a idea what to do?
Click to expand...
Click to collapse
- Install Phone INFO ★Samsung★ app, or Shortcut Master app.
- Open Menu > 'Secret Codes'
That will show ALL available secret codes in your device. You will know how many secret codes available for you, and also you can launch it.
Thanks, that one work for me... thanks again.
Mangentic sensor fixed, thanks again for the playstore link
edit : removed
Righttoknow said:
well, i guess i trying to find a way to reflash the phone with a new firmware, seems like 6.0.1 sucks. i guess the only option is with a flash box now...
Click to expand...
Click to collapse
Note 3 forum ??
Sent from my SM-N930F using XDA-Developers Legacy app
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Hey thanks for credits..
is there a lot of people suffering from this?
i originally had the problem because i am an idiot (yesss)... too fast reading in CF-root download page and i flashed the edge package over a flat device (ouch)... luckly i found how to fix easy
did you guys flashed the correct one?
Wuby986 said:
Hey thanks for credits..
is there a lot of people suffering from this?
i originally had the problem because i am an idiot (yesss)... too fast reading in CF-root download page and i flashed the edge package over a flat device (ouch)... luckly i found how to fix easy
did you guys flashed the correct one?
Click to expand...
Click to collapse
Yeah I've seen quite a few with this problem including me, yw!
MMDragonRanger said:
Yeah I've seen quite a few with this problem including me, yw!
Click to expand...
Click to collapse
Wooow this is scary... Well for this we have a workaround.. Let's just hope this is the only "surprize" we can get.. Thanks for share..
Also i would like to say that this is gonna help only if, once you are in the firmware page after dialing, the first two lines from top are displaying different values for part's and general firmware..
Hitting the tsp update is going to make those match
MMDragonRanger said:
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Click to expand...
Click to collapse
hi, can you help me. the dial don't want open this code.
U know why ? Thx a LOOOT !
neferym said:
hi, can you help me. the dial don't want open this code.
U know why ? Thx a LOOOT !
Click to expand...
Click to collapse
You have to be on a stock rom, there is an app that worked with my s5 to access those secret menus but i doubt it works with the s6
MMDragonRanger said:
You have to be on a stock rom, there is an app that worked with my s5 to access those secret menus but i doubt it works with the s6
Click to expand...
Click to collapse
yeah, whith this one, i can access to app : G920FXXU1AOD9_G920FOXA1AOD9_G920FXXU1AOD9_HOME.tar
Ty !
Thank you with all my heart, you just save my life... and my S6 920F !!!
There are at least 2 idiots on this planet, and the other was me ...
The phone has been running properly ..
Helpful Information thanks buddy ...:good:
it works!
thanks
MMDragonRanger said:
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Click to expand...
Click to collapse
---------- Post added at 02:28 PM ---------- Previous post was at 02:24 PM ----------
Dear it is fixed. Thanks a lot
Can someone help me? When I try to access this code through my dialer I get "Not Registered on Network". I flashed a new stock ROM through Odin and the problem still arises.
---------- Post added at 02:18 PM ---------- Previous post was at 02:15 PM ----------
steviecvr said:
Can someone help me? When I try to access this code through my dialer I get "Not Registered on Network". I flashed a new stock ROM through Odin and the problem still arises.
Click to expand...
Click to collapse
Sorry, a reboot fixed this. Thanks so much for this thread.
SwissGalaxy said:
Thank you with all my heart, you just save my life... and my S6 920F !!!
There are at least 2 idiots on this planet, and the other was me ...
Click to expand...
Click to collapse
Make that 3 idiots.
It didn't work for me..
Thanks a lot Mr wuby986,you save my life,after trying many methods on s6 reverted touchscreen,and all failed,tried yours and works,thanks a lot once again.
Worked for me!
I somehow got into this state on my T-Mobile Galaxy Note 4 (N910T) when I flashed the latest TWRP (v3.0.2-0). At first I flashed the .img using my existing TWRP 2.8.7, but then I was unable to boot into recovery. I then used ODIN to flash the .tar version which worked. However, after rebooting into the system my touch was all messed up. Thankfully the stylus worked just fine so I was able to use that to use my phone until I found this thread.
I did *#2663# in the dialer, saw my versions didn't match and did the update as per the OP. Everything is back to normal now!
This fixed my screen glitch. You make me love the internet. I found this page only after several hours of searching.
I had tried to update to TWRP 3.0 with the Android app but selected the wrong device (Note 4 Edge instead of Note 4).
I do have other problems. Recent and Back Button Not working
how to fix the recent button and back button of galaxy s6,it was working before then suddenly the button stop working even when you touch it its not showing any response or light..i did try to full factory reset in odin mode buts not fix the issue
please help im using the assististant menu for a while ands it really annoying
Tha ks
lanreb said:
This fixed my screen glitch. You make me love the internet. I found this page only after several hours of searching.
I had tried to update to TWRP 3.0 with the Android app but selected the wrong device (Note 4 Edge instead of Note 4).
Click to expand...
Click to collapse
So I have the same inverted screen problem! Although mine is across the Y-axis... Touch the left and the button on the right gets clicked.
I'm SURE what did it was installing TWRP 3.0! And now I see someone else had the same cause!
But I have a G920P running 5.0.2. (and I'd like to keep my firmware where it is). What can I do!? HELP!
I had root, but I needed to install a recovery so I could install Xposed Framework so I could enable a module. And here we are...
Update: This issue was solved for me. TWRP still won't boot, but at least my touch issue is gone.
In 5.0.1 it worked. Can i do something with it?
TheGolem said:
In 5.0.1 it worked. Can i do something with it?
Click to expand...
Click to collapse
you have to enable it in phone manager, dropzone i think
00471 said:
you have to enable it in phone manager, dropzone i think
Click to expand...
Click to collapse
Still not notify
TheGolem said:
Still not notify
Click to expand...
Click to collapse
i have android 6 and facebook works as expected, allow it in dropzone and also alow it in power manager so it wont be disabled automaticaly, last thing i can advise you is to go to app settings and see if notifications permission is allowed, if you do everything as i said ther is no reason to be any problem, if it works for me, it will be to you, if still wont work, try wipe you system and reflash whole system again vie stock recovery and button method
00471 said:
...power manager..
Click to expand...
Click to collapse
Battery manager?
TheGolem said:
Battery manager?
Click to expand...
Click to collapse
sorry for late reply, go to power manager > remaining > protected apps, and check apps that you want to be running in background
00471 said:
sorry for late reply, go to power manager > remaining > protected apps, and check apps that you want to be running in background
Click to expand...
Click to collapse
Its already checked.
TheGolem said:
Its already checked.
Click to expand...
Click to collapse
if you have messenger protected, allowed in dropzone and you granted the notification permission to the app then there is problem in something else, try reflash your rom with wipping all
00471 said:
if you have messenger protected, allowed in dropzone and you granted the notification permission to the app then there is problem in something else, try reflash your rom with wipping all
Click to expand...
Click to collapse
I had the android 6 before, and i had this problem too.
So i don't think that, the reflash will help
TheGolem said:
Early i has the android 6, and i had this problem too.
So i don't think that, the reflash will help
Click to expand...
Click to collapse
well, i read many people with many problems, from battery life to notifications problem, and some wrote that it can be related to SW they flashed update from, sadly i can not help much here, if you are on stock rom, last i could advise you is to try ARROW rom or even Lineage OS 13, devs made very good job there and especially Arrow is very stable and has absolutely the best battery life you could imagine, maybe it will help after all
00471 said:
well, i read many people with many problems, from battery life to notifications problem, and some wrote that it can be related to SW they flashed update from, sadly i can not help much here, if you are on stock rom, last i could advise you is to try ARROW rom or even Lineage OS 13, devs made very good job there and especially Arrow is very stable and has absolutely the best battery life you could imagine
Click to expand...
Click to collapse
Wish i would have unlocked bootloader :') Anyway, thanks for the helps.
TheGolem said:
Wish i would have unlocked bootloader :') Anyway, thanks for the helps.
Click to expand...
Click to collapse
its not difficult to unlock bootloader, i had it locked too when i got the phone
00471 said:
its not difficult to unlock bootloader, i had it locked too when i got the phone
Click to expand...
Click to collapse
How did you do it?
TheGolem said:
How did you do it?
Click to expand...
Click to collapse
THIS could help
00471 said:
THIS could help
Click to expand...
Click to collapse
I emailed them and tried the website. In the reply to the email they said: log in continously 14 days to Huawei ID. The website said, the IMEI and Product Number does not match.
TheGolem said:
The website said, the IMEI and Product Number does not match.
Click to expand...
Click to collapse
To get the actual IMEI, using the dialler enter *#*#2846579#*#* to access the Project Menu, then select: 2. Veneer Informations > 4. Other info.
To get the Product Number (8 digit code), using the dialler enter *#*#1357946#*#*
When you enter these on their website, is it still saying the IMEI and Product Number do not match?
If they do not match, where did you buy the phone from?
GaT7 said:
If they do not match, where did you buy the phone from?
Click to expand...
Click to collapse
Vodafone
GaT7 said:
When you enter these on their website, is it still saying the IMEI and Product Number do not match?
Click to expand...
Click to collapse
I'll try it.
TheGolem said:
I'll try it.
Click to expand...
Click to collapse
it was some time ago, but when i was trying to unlock bootloader i was that problem that site didnt want to accept my IMEI, after i contacted huawei support, it accepted it meanwhile, i tought this could be you case too, but who knows
00471 said:
it was some time ago, but when i was trying to unlock bootloader i was that problem that site didnt want to accept my IMEI, after i contacted huawei support, it accepted it meanwhile, i tought this could be you case too, but who knows
Click to expand...
Click to collapse
I tried with the email contact, but they siad that too, i sent them a screenshot (about a month ago), but no reply.