Hi, I just installed CloudyFlex 1.4 with my LG G2 D801 var. Wind/Videotron. The only version that was working for me was the D803 canadian version. Once I've installed it, I didn't have LTE/4G anymore. I've tried several tutorials such as
stefan063 said:
Type in dialer:
3845#*802#,then the secret menu will come up...Then:
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
Job done...
Click to expand...
Click to collapse
but I still have 3G. Is there a way to get back my 4G?
look for a 4.2.2 modem for your device and carrier. that should help.
what do you mean by modem?
Related
I have a D802 Hong Kong version. In the secret menu (3845#*802#) i have found this: LGD802AT-00-V10C-HKG-XX-NOV-30-2013
Now, I would like to use the 4g connection in my country (Italy, carrier TIM) but the 4g option is not avaible in "network mode". After a test with another G2 (italian version and same carrier), I can say that the connection don't switch automatically on 4g but keeps the H+ one. So i think is necessary a modification.
Solutions?
Is it necessary to flash an europe radio? or something else? I'd like to keep the stock rom Lg but is not a fundamental.
Baseband: M8974A - AAAANAZM - 1.0.190036
Kernel: 3.4.0
Build: JDQ39B
I have the g2 for two days. I know it very little. I do not have much knowledge about it. Some good soul can explain to me how to do?
I need your help!
Did you verify that the device has the correct radio bands for the lte on that carrier?
x714x said:
Did you verify that the device has the correct radio bands for the lte on that carrier?
Click to expand...
Click to collapse
I don't know how to check! On the box of g2: gsm 850/900/1800/1900; wcdma 850/900/1900/2100; LTE 2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20).
My carrier is Tim but i don't kwow which band uses.
In secret menu/LTE Band section: avaible band 1,2,3,4,5,7,8,17,20,40. No one is selected.
Can i flash V10E firmware for Italy on V10C firmware for honk kong (actually on my device)?
Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.
x714x said:
Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.
Click to expand...
Click to collapse
maybe i should enable "band 3" in LTE setting in secret menu.
Hi,
I've a similar question and I hope someone could help me: I've a G2 phone using the D80210e-ESA-XX firmware.
In the product specifications, supported LTE frequency bands are 900/1800/2100/2600/850. I know that in Italy working frequency bands are 800/1800/2600. Now, my phone does not support 800 MHz: do you think is possible to upload a different firmware (IT or EUR ones) on my phone? With one of these firmware, does the device will work at 800 MHz?
Thank you so much.
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you
madner81 said:
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you
Click to expand...
Click to collapse
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Sent from my LG-D802 using Tapatalk
Does your country offer 4G networks? I'm in Kenya n any 4G device I ship in shows 4G even though we dont have it yet
Sent from my HTC One using XDA Premium 4 mobile app
popsi said:
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Click to expand...
Click to collapse
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...
madner81 said:
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...
Click to expand...
Click to collapse
My friend i don't really know where in this forum the instructions for flashing a new stock firmware are... (I am also new in this community)
And i flashed it with Greek instructions so my link won't help you and i don't want to post some link i haven't tested by myself...
Sorry i hope you can understand!
At moment i have no time, but if I would be you I would search in the G2 Section for instructions!
They must definitely be somewhere!
Did you subscribe for LTE with your carrier?
Sent from my LG-D802 using Tapatalk
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you
madner81 said:
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you
Click to expand...
Click to collapse
Hi,
the procedure using the secret menu definitively works on my D80210e-ESA-XX, but I need to re-select it after every reboot.
Does anybody know how to make it permanent or how to automate this selection on boot (maybe using Tasker or something similar)?
zacharias99 said:
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should
Click to expand...
Click to collapse
by flash, did you mean flash kdz of different region?
gpkumaran said:
by flash, did you mean flash kdz of different region?
Click to expand...
Click to collapse
yes exactly!
I flashed the European .kdz file!
I have an international G2 D802.. We, in india have certain operators in Band 40 LTE.. Is it possible to activate Band 40 in D802 by flashing D802T kdz in D802??? Kindly Help..
I am on Indian D802 32 GB with Official Indian 4.4.2 KitKat ROM. I am travelling to a country where there are Band 40 and BAND 3 LTE networks. But in network config settings where we choose network mode, LG has hidden the option to select LTE.
So which Euro/SE Asian KDZ has that LTE option enabled?
Thanks a lot.
sanke1 said:
I am on Indian D802 32 GB with Official Indian 4.4.2 KitKat ROM. I am travelling to a country where there are Band 40 and BAND 3 LTE networks. But in network config settings where we choose network mode, LG has hidden the option to select LTE.
So which Euro/SE Asian KDZ has that LTE option enabled?
Thanks a lot.
Click to expand...
Click to collapse
*#*#4636#*#* This will take you to that menu. Is that what your asking? An easier way is to use an app called 4g toggle, it takes you straight into that menu.
Hi, first of all, this phone has been flashed to XtreStoLite ROM, which is based on a G900F firmware. Prior to this, the phone has been unlocked by the shop that the phone was bought. S5 G900L is a Korean model and is meant for the LG U+ network. The phone was able to pick up LTE signal in my country (Brunei).
The phone is unable to pick up LTE signals despite on the Network Mode option, there is an option to select LTE/WCDMA/GSM mode. Is there a code that I can use on the phone dialer so that I can activate LTE?
What I meant is something similar to this: http://forum.xda-developers.com/lg-g3/general/mod-root-activate-lte-g3-t2819387
I have tried to dial ##3282# but it does not do anything. I think it's only for the Sprint S5.
The same goes for:
To tell what Band on: ----
1. ##debug#
2. enter passcode 777468
3. go to LTE engineering menu
Click to expand...
Click to collapse
As for my next question:
When I flashed a stock G900L firmware from SamMobile, it won't read my SIM card, and it seems that I have to use a LG U+ SIM card from Korea first. How do I make the phone able to read my SIM card from Brunei?
Bump.
..
skullverine said:
Hi, first of all, this phone has been flashed to XtreStoLite ROM, which is based on a G900F firmware. Prior to this, the phone has been unlocked by the shop that the phone was bought. S5 G900L is a Korean model and is meant for the LG U+ network. The phone was able to pick up LTE signal in my country (Brunei).
The phone is unable to pick up LTE signals despite on the Network Mode option, there is an option to select LTE/WCDMA/GSM mode. Is there a code that I can use on the phone dialer so that I can activate LTE?
What I meant is something similar to this: http://forum.xda-developers.com/lg-g3/general/mod-root-activate-lte-g3-t2819387
I have tried to dial ##3282# but it does not do anything. I think it's only for the Sprint S5.
. . . . .
As for my next question:
When I flashed a stock G900L firmware from SamMobile, it won't read my SIM card, and it seems that I have to use a LG U+ SIM card from Korea first. How do I make the phone able to read my SIM card from Brunei?
Click to expand...
Click to collapse
- As for secret code ##3282#: First, the secret code format of Samsung is *#xxxx#, not ##xxxx#. Second, to see ALL AVAILABLE secret codes in your device, install Phone INFO ★Samsung★ app > Menu > 'Secret Codes'. That way you will know the code 3282 does exist or not.
- Regarding LTE signal, may be your phone does not have LTE bands that your network currently supports. To check for what LTE bands your phone has, enter *#2263# and select LTE Band Preference to see a list of supporting bands.
- If the required bands are missing, you may want to add it to your phone? Try this thread if any luck.
Hi guys,
I've researched a little bit with no positive results, and have a question: is there any what to add/enable/unlock bands for D800 and D801 versions?
My main device is the D800 (tried with CloudyG3, CloudyStock and now a D802 rom with D800 kernel) and recently bought a LTE plan in my country (carrier uses 3G 2100MHz and LTE 3), so my first question is: does it exists any way to enable LTE band 3 for AT&T D800? I've tried with 3845#*800 > LTE-Only > Modem Settings > LTE Band Selection and tapping Band 3, but there is no SUCCESS popup. Confirmed device is LTE/GSM/WCDMA enabled with *#*#4636#*#*
Now, tried with D801 (running stock 4.4.2 TMO D80120g) and I've no data at all, not even 2G data. I've wiped the device, replaced SIM, deleted/created APN, tried enabling same band with hidden menu and received SUCCESS popup but no results as well. Also tried 3845#*801 > WCDMA-Only > Modem Settings > Network Mode > tapping WCDMA 2100 or Automatic.
Summarising, can I add/enable LTE band 3 on D800 and WCDMA/UMTS 2100MHz to D801?
bump
I need 1800 Mhz to work on my T mobile LG G2
Im facing the same issue. my carrier's LTE is on 1800 Mhz but my T mobile LG G2 D801 needs to be enabled on this frequency i.e band 5, I have tried all the above tricks but to no avail. is there any other way apart form flashing a custom or international ROM? NEED HELP.
Bump... Please any help
same issue here....plz help!!!
anyone can help?????
Hey everyone.
I bought my G2 from an online retailer. It's from Europe I believe (D80220C?).
Here's my issue:
When I try to activate LTE in my mobile data menu the only selection is "GSM / WCDMA Auto". Even further, when I install a custom ROM I get the selection for LTE but it does not enter the LTE network. And further again, when I enter the 3845#*802# menu and select "LTE only" from the 'Hidden Menu -> LTE-Only -> Modem Settings -> RAT Selection' menus, I lose my network connectivity completely.
I know my SIM card works because I have an Xperia Z2 and Samsung Galaxy S3 (d2lte) and they both enter the LTE network instantly.
I'm guessing that the problem has to do with the modem. Is it because it is a European device and has no LTE network support in Canada?
I have downloaded close to 10 different ROMs tonight and plan on finding one that suits me as well as try to find one that actually allows me to use the LTE network.
Thanks in advanced for anyone interested in helping me out with this issue.
Bump
Bump
Can anyone help me with this?
Flash the correct modem. I'm having a similar issue
---------- Post added at 04:29 AM ---------- Previous post was at 04:26 AM ----------
http://forum.xda-developers.com/showthread.php?t=2451426
mpelley92 said:
Hey everyone.
I bought my G2 from an online retailer. It's from Europe I believe (D80220C?).
Here's my issue:
When I try to activate LTE in my mobile data menu the only selection is "GSM / WCDMA Auto". Even further, when I install a custom ROM I get the selection for LTE but it does not enter the LTE network. And further again, when I enter the 3845#*802# menu and select "LTE only" from the 'Hidden Menu -> LTE-Only -> Modem Settings -> RAT Selection' menus, I lose my network connectivity completely.
I know my SIM card works because I have an Xperia Z2 and Samsung Galaxy S3 (d2lte) and they both enter the LTE network instantly.
I'm guessing that the problem has to do with the modem. Is it because it is a European device and has no LTE network support in Canada?
I have downloaded close to 10 different ROMs tonight and plan on finding one that suits me as well as try to find one that actually allows me to use the LTE network.
Thanks in advanced for anyone interested in helping me out with this issue.
Click to expand...
Click to collapse
This is impossible to answer without knowing who your network provider is. Some use different bands than others.
Virgin mobile. The bands are: 1700B4 2600B7, if they share the towers with Bell. My phone is capable of those bands.
Darriousx said:
Flash the correct modem. I'm having a similar issue
---------- Post added at 04:29 AM ---------- Previous post was at 04:26 AM ----------
http://forum.xda-developers.com/showthread.php?t=2451426
Click to expand...
Click to collapse
Could you provide me a link to the modem we need in Canada?
mpelley92 said:
Could you provide me a link to the modem we need in Canada?
Click to expand...
Click to collapse
Who's your carrier?
Darriousx said:
Who's your carrier?
Click to expand...
Click to collapse
Virgin Mobile, so basically Bell.
My guess is that it will be D803 HERE. If you have ROM on your device then check model name under settings->about phone. Should say D803, but it also may be wrong depending on the ROM you flashed.
Darriousx said:
My guess is that it will be D803 HERE. If you have ROM on your device then check model name under settings->about phone. Should say D803, but it also may be wrong depending on the ROM you flashed.
Click to expand...
Click to collapse
Mine is the D802. I tried flashing a D803 Bell modem earlier today and that did not work. Had to restore EFS and restore ROM.
Edit: Pretty sure I just bricked my phone. Can't boot any rom now... this is ridiculous. I backed up my EFS and when I restore it does nothing.
Edit2: Nevermind, false alarm. That Bell modem is not going to work for me though. D802 doesn't like D803 basebands
Did you try D802 modem? If not then flash the D802 modems and see if you get a winner
Darriousx said:
Did you try D802 modem? If not then flash the D802 modems and see if you get a winner
Click to expand...
Click to collapse
That's the problem though. There is no Bell baseband for the D802, as the D802 is the Intl' phone
Is it possible to modify the baseband to include the frequencies of Bell's LTE network in Canada?