Database Users

"This is a Question" - LG G2 Regional Carrier Menu

EDIT: Sorry, forgot to select the check-box indicating this was a question. This feature cannot be edited after the fact hence the title modification.
The LG G2 (model: LG-D801 and LG-D803) are sold in Canada. The LG-D801 model is the same variant sold my T-Mobile (USA) but both models have identical specs. and have been crippled as for the agreement between LG and the specific mobile vendors. The LG-801 does have the LTE capability but being crippled, even if the device is "unlocked" with correct APN settings, the fastest speed received will be 4G. When you go into your network options, 4 modems should be present:
LTE/WCDMA/GSM (auto connect)
WCDMA/GSM (auto)
WCDMA (auto)
GSM (auto)
Unfortunately, the LG-D801 model has the LTE modem crippled and in order to enable, you must flash the appropriate carrier ROM and change the regional settings to reflect your LTE carrier otherwise the modem will not enable. I do know some have been lucky with LTE enabling but for the most part, this is not the case.
I know with Samsung Galaxy Note 3, there's a dial-pad sequence you enter to get into the CSC menu to change your carrier. I also know you can install any variant of ROM onto this device for model: SM-N900W8 and it will work.
My question are:
■ Can I install the Telus LG-D803 ROM onto my WIND LG-D801 device without bricking and if so, is there a good instructional guide on how to do so?
■ Is there a recovery program such as TWRP which I can install?
■ Once installed, the KEY point is whether or not anyone knows the regional dial-pad code? This will change the carrier settings to reflect the newly installed ROM so it will unlock the LTE modem and other options specific to the carrier.
Thank you!

Refer to thread: http://forum.xda-developers.com/showthread.php?t=2493652&page=3 for my opinion and conclusion. Thanks!

4G on D802 HKG version

I have a D802 Hong Kong version. In the secret menu (3845#*802#) i have found this: LGD802AT-00-V10C-HKG-XX-NOV-30-2013
Now, I would like to use the 4g connection in my country (Italy, carrier TIM) but the 4g option is not avaible in "network mode". After a test with another G2 (italian version and same carrier), I can say that the connection don't switch automatically on 4g but keeps the H+ one. So i think is necessary a modification.
Solutions?
Is it necessary to flash an europe radio? or something else? I'd like to keep the stock rom Lg but is not a fundamental.
Baseband: M8974A - AAAANAZM - 1.0.190036
Kernel: 3.4.0
Build: JDQ39B
I have the g2 for two days. I know it very little. I do not have much knowledge about it. Some good soul can explain to me how to do?
I need your help!

Did you verify that the device has the correct radio bands for the lte on that carrier?

x714x said:
Did you verify that the device has the correct radio bands for the lte on that carrier?
Click to expand...
Click to collapse
I don't know how to check! On the box of g2: gsm 850/900/1800/1900; wcdma 850/900/1900/2100; LTE 2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20).
My carrier is Tim but i don't kwow which band uses.
In secret menu/LTE Band section: avaible band 1,2,3,4,5,7,8,17,20,40. No one is selected.

Can i flash V10E firmware for Italy on V10C firmware for honk kong (actually on my device)?

Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.

x714x said:
Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.
Click to expand...
Click to collapse
maybe i should enable "band 3" in LTE setting in secret menu.

Hi,
I've a similar question and I hope someone could help me: I've a G2 phone using the D80210e-ESA-XX firmware.
In the product specifications, supported LTE frequency bands are 900/1800/2100/2600/850. I know that in Italy working frequency bands are 800/1800/2600. Now, my phone does not support 800 MHz: do you think is possible to upload a different firmware (IT or EUR ones) on my phone? With one of these firmware, does the device will work at 800 MHz?
Thank you so much.

I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!

zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you

madner81 said:
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you
Click to expand...
Click to collapse
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should

zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Sent from my LG-D802 using Tapatalk

Does your country offer 4G networks? I'm in Kenya n any 4G device I ship in shows 4G even though we dont have it yet
Sent from my HTC One using XDA Premium 4 mobile app

popsi said:
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Click to expand...
Click to collapse
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...

madner81 said:
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...
Click to expand...
Click to collapse
My friend i don't really know where in this forum the instructions for flashing a new stock firmware are... (I am also new in this community)
And i flashed it with Greek instructions so my link won't help you and i don't want to post some link i haven't tested by myself...
Sorry i hope you can understand!
At moment i have no time, but if I would be you I would search in the G2 Section for instructions!
They must definitely be somewhere!

Did you subscribe for LTE with your carrier?
Sent from my LG-D802 using Tapatalk

zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you

madner81 said:
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you
Click to expand...
Click to collapse
Hi,
the procedure using the secret menu definitively works on my D80210e-ESA-XX, but I need to re-select it after every reboot.
Does anybody know how to make it permanent or how to automate this selection on boot (maybe using Tasker or something similar)?

zacharias99 said:
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should
Click to expand...
Click to collapse
by flash, did you mean flash kdz of different region?

gpkumaran said:
by flash, did you mean flash kdz of different region?
Click to expand...
Click to collapse
yes exactly!
I flashed the European .kdz file!

I have an international G2 D802.. We, in india have certain operators in Band 40 LTE.. Is it possible to activate Band 40 in D802 by flashing D802T kdz in D802??? Kindly Help..

[Q] LTE mode on G900L / Stock G900L Firmware question

Hi, first of all, this phone has been flashed to XtreStoLite ROM, which is based on a G900F firmware. Prior to this, the phone has been unlocked by the shop that the phone was bought. S5 G900L is a Korean model and is meant for the LG U+ network. The phone was able to pick up LTE signal in my country (Brunei).
The phone is unable to pick up LTE signals despite on the Network Mode option, there is an option to select LTE/WCDMA/GSM mode. Is there a code that I can use on the phone dialer so that I can activate LTE?
What I meant is something similar to this: http://forum.xda-developers.com/lg-g3/general/mod-root-activate-lte-g3-t2819387
I have tried to dial ##3282# but it does not do anything. I think it's only for the Sprint S5.
The same goes for:
To tell what Band on: ----
1. ##debug#
2. enter passcode 777468
3. go to LTE engineering menu
Click to expand...
Click to collapse
As for my next question:
When I flashed a stock G900L firmware from SamMobile, it won't read my SIM card, and it seems that I have to use a LG U+ SIM card from Korea first. How do I make the phone able to read my SIM card from Brunei?

Bump.

..

skullverine said:
Hi, first of all, this phone has been flashed to XtreStoLite ROM, which is based on a G900F firmware. Prior to this, the phone has been unlocked by the shop that the phone was bought. S5 G900L is a Korean model and is meant for the LG U+ network. The phone was able to pick up LTE signal in my country (Brunei).
The phone is unable to pick up LTE signals despite on the Network Mode option, there is an option to select LTE/WCDMA/GSM mode. Is there a code that I can use on the phone dialer so that I can activate LTE?
What I meant is something similar to this: http://forum.xda-developers.com/lg-g3/general/mod-root-activate-lte-g3-t2819387
I have tried to dial ##3282# but it does not do anything. I think it's only for the Sprint S5.
. . . . .
As for my next question:
When I flashed a stock G900L firmware from SamMobile, it won't read my SIM card, and it seems that I have to use a LG U+ SIM card from Korea first. How do I make the phone able to read my SIM card from Brunei?
Click to expand...
Click to collapse
- As for secret code ##3282#: First, the secret code format of Samsung is *#xxxx#, not ##xxxx#. Second, to see ALL AVAILABLE secret codes in your device, install Phone INFO ★Samsung★ app > Menu > 'Secret Codes'. That way you will know the code 3282 does exist or not.
- Regarding LTE signal, may be your phone does not have LTE bands that your network currently supports. To check for what LTE bands your phone has, enter *#2263# and select LTE Band Preference to see a list of supporting bands.
- If the required bands are missing, you may want to add it to your phone? Try this thread if any luck.

[4g fix] on Fulmics Rom for verizon VS985

Four things to note before proceeding...
1. This only works for users having vs985 model outside the US or not on verizon network.
2. I'm beginner im not responsible for any harm to your phone , I'm just sharing what i did to attain 4g services.
3. May be you already know all the things in the post but it can be useful for beginners like me .
4. Sorry for the english as its not my native language.
So Hi guys i installed this rom and as usually i was not getting any 4G or lte network.
Then i go to my network provider's website to check on which Band or frequency 4g services are active. ( for this i just googled 'idea 4g band' and i am redirected to my network provider's website. Here 'idea' is the name of network provider.)
So i found that in my region 4g services are active on Band3
Different careers use different Bands to provide 4g services such as band40 , band17 etc
Then i go to phone's hidden menu by the Advanced Menu of Fulmics Tweaks.
In hidden menu i select Modem Protocol > LTE Band Selection
There i select Band3 but i got "Fail' message on screen , however when i select band4 it gave me a 'success' message.
It means on my phone band4 is active but not band3.
All this information of Bands are stored in Modem or Bootstack section of our phone.
May be fulmics rom is having a band concerned with international rom So now i need a modem on which Band3 can be activated by going to hidden menu.
So i just flashed 35b Bootstack compiled by @xdabbeb.
Which can be found in this thread http://forum.xda-developers.com/verizon-lg-g3/development/xdabbeb-s-vs980-2-0-0-t3231279
After flashing when i tried to select band3 in hidden menu it gave a 'success' message . It means Band3 is activated on my phone. And now when i searched for all networks in Networks Menu of Phone Setting. I got my network listed and i successfully registered on it. And got 4G NETWORK.
So first of all you should know on which band your network is working and then try flashing different bootstacks on which your 4g Band can be activated.
Flashing wrong Bootstack can brick your phone
""Do not flash any bootstack above 35b. Custom roms are still not compatible with bootstacks above 35b""
You can try 24b , 12b. (But im sure only about 35b as i tried only this)
Again I'm not responsible for any harm to your phone. Use your mind and search thoroughly before taking any step.

akki7636 said:
Three things to note before proceeding...
1. I'm beginner im not responsible for any harm to your phone , I'm just sharing what i did to attain 4g services.
2. May be you already know all the things in the post but it can be useful for beginners like me .
3. Sorry for the english as its not my native language.
So Hi guys i installed this rom and as usually i was not getting any 4G or lte network.
Then i go to my network provider's website to check on which Band or frequency 4g services are active. ( for this i just googled 'idea 4g band' and i am redirected to my network provider's website. Here 'idea' is the name of network provider.)
So i found that in my region 4g services are active on Band3
Different careers use different Bands to provide 4g services such as band40 , band17 etc
Then i go to phone's hidden menu by the Advanced Menu of Fulmics Tweaks.
In hidden menu i select Modem Protocol > LTE Band Selection
There i select Band3 but i got "Fail' message on screen , however when i select band4 it gave me a 'success' message.
It means on my phone band4 is active but not band3.
All this information of Bands are stored in Modem or Bootstack section of our phone.
May be fulmics rom is having a band concerned with international rom So now i need a modem on which Band3 can be activated by going to hidden menu.
So i just flashed 35b Bootstack compiled by @xdabbeb.
Which can be found in this thread http://forum.xda-developers.com/verizon-lg-g3/development/xdabbeb-s-vs980-2-0-0-t3231279
After flashing when i tried to select band3 in hidden menu it gave a 'success' message . It means Band3 is activated on my phone. And now when i searched for all networks in Networks Menu of Phone Setting. I got my network listed and i successfully registered on it. And got 4G NETWORK.
So first of all you should know on which band your network is working and then try flashing different bootstacks on which your 4g Band can be activated.
Flashing wrong Bootstack can brick your phone
""Do not flash any bootstack above 35b. Custom roms are still not compatible with bootstacks above 35b""
You can try 24b , 12b. (But im sure only about 35b as i tried only this)
Again I'm not responsible for any harm to your phone. Use your mind and search thoroughly before taking any step.
Click to expand...
Click to collapse
Hi there, thanks for the info. What area are you in and where did you find what band you needed? I have tried numerous times with all the bootstacks and never had consistent 4G.

@mopartonyg
I'm in India and i just checked my career's website to know which band they are using. However in USA Verizon wireless uses Band12 as Primary Band and Band2 , Band4 as Secondary band to strengthen the signal in densely populated urban area. So if you are verizon user in USA band 12,4,2 must be activated. I can't say anything about consistency as it varies from place to place.

Actually Verizon uses band 13 for it's primary along with bands 4 and 2. Not having any luck getting data to work on Fulmics with this method. I select band 13 and band 4 (as band 2 is not in my area) yet even with that I still can't get data at all on Verizon with Fulmics.

same boat here... actually the only band I can get working is 4. I have to assume the design of the international rom with the band they are designed around, just don't play nice with our CDMA harware/modem partition. I would suspect that the international roms would require some engineering for them to really work properly. not sure if just porting them over and chaning settings is going to get the job done. perhaps someone more intelligent than I could share some light, but there certainly is a conflict with how these roms communicates across the CDMA bands in the US
Sent from my VS985 4G using XDA-Developers mobile app

@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english

akki7636 said:
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
Click to expand...
Click to collapse
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.

SignatureBoy said:
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
Click to expand...
Click to collapse
Oh... Glad to hear that buddy..
So i think my post is useful for only international users which are not on verizon wireless.

akki7636 said:
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
Click to expand...
Click to collapse
A couple of good approaches to the issue. Although it needs to be noted 4G is directly related to the band on each carrier (VZW, TMO, etc) See Below
Carrier 4G LTE Bands Frequencies
Verizon Wireless 2, 4, 13 1900, 1700 f, 700 c
T-Mobile 2, 4, 12 1900, 1700 def, 700 a
Sprint 25, 26, 41 1900 g, 850, 2500
Europe 3, 7, 20 1800, 2600, 800
If a specific ROM cannot be set to the correct bands above, it would make sense to me that Verizon wouldn't work in Europe on a stock VZW ROM. It would not be able to use the channels in Europe.
And vice versa, that Verizon wouldn't work in the states on an international ROM in the US. Whether the Verizon SIM is blocking that band, or the design of the ROM, would be a better question for the developers.
SignatureBoy said:
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
Click to expand...
Click to collapse
Warid's approved devices will definitely work with Warid's LTE network. For our "Warid LTE Approved' devices please visit the "Warid's LTE devices" section. You can also purchase LTE devices that support 1800 MHz (FDD-LTE Bands 3) from other sources. However, Warid doesn't take responsibility for these devices if they do not work on Warid's LTE network http://www.waridtel.com/lte/faqs
So it makes sense that if BAND 3 works international (see above) that you get 4G

The one thing I noticed after activating bands 13 and 4 (with the proper VS985 35B bootstack) in the hidden settings is when I searched for my network under network settings it does bring up Verizon but it fails authentication. So it's like there is something missing in Fulmics ROM itself that would get it to where the ROM will work with Verizon's network. So is it a matter of lifting whatever files from say 47A/47B into Fulmics that have the Verizon VS985 specific info to get it to work perhaps?

AngryManMLS said:
The one thing I noticed after activating bands 13 and 4 (with the proper VS985 35B bootstack) in the hidden settings is when I searched for my network under network settings it does bring up Verizon but it fails authentication. So it's like there is something missing in Fulmics ROM itself that would get it to where the ROM will work with Verizon's network. So is it a matter of lifting whatever files from say 47A/47B into Fulmics that have the Verizon VS985 specific info to get it to work perhaps?
Click to expand...
Click to collapse
I think now its not a matter of bootstack. Because even when Required Band is activated we can't register to the Verizon. Xpirt mentioned in a post that he is working to resolve network issues in Verizon models. We can hope that this problem will be solved in next version However xdabbeb shared that the 47A modem won't work without the corresponding 47A secondary bootloader (sbl1). Unfortunately, the 47A sbl1 doesn't play nice with the last bump-exploitable Android bootloader (aboot) we have from 12b. If you use that pairing, you'll put your device into 9008 bulk mode(Hard brick).

akki7636 said:
I think now its not a matter of bootstack. Because even when Required Band is activated we can't register to the Verizon. Xpirt mentioned in a post that he is working to resolve network issues in Verizon models. We can hope that this problem will be solved in next version However xdabbeb shared that the 47A modem won't work without the corresponding 47A secondary bootloader (sbl1). Unfortunately, the 47A sbl1 doesn't play nice with the last bump-exploitable Android bootloader (aboot) we have from 12b. If you use that pairing, you'll put your device into 9008 bulk mode(Hard brick).
Click to expand...
Click to collapse
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!

AngryManMLS said:
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
Click to expand...
Click to collapse
+1

AngryManMLS said:
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
Click to expand...
Click to collapse
This is good to hear and I second that!
Looking forward to getting it fixed and use it as my daily driver. It would totally be worth a big donation, thanks to everyone working on making this available to so many.

Great discussion towards the development of the International ROM's for our VS985. I was able to get 4G with Andy's 30A ported ROM...although the signal bars never came up on my phone, I was able to get the 4G speeds. I noticed that the APN XML was filled with Chinese... So for whatever reason and way, my phone was able to grab "somebody's" 4G tower. I'm hoping the RIL (Radio Interface Layer) and libraries were pulled over and perhaps this could provide some more insight to @Xspirit

b00ster23 said:
Great discussion towards the development of the International ROM's for our VS985. I was able to get 4G with Andy's 30A ported ROM...although the signal bars never came up on my phone, I was able to get the 4G speeds. I noticed that the APN XML was filled with Chinese... So for whatever reason and way, my phone was able to grab "somebody's" 4G tower. I'm hoping the RIL (Radio Interface Layer) and libraries were pulled over and perhaps this could provide some more insight to @Xspirit
Click to expand...
Click to collapse
Cool buddy... I think our vs985 will be on 4g Speed very soon.

akki7636 said:
Cool buddy... I think our vs985 will be on 4g Speed very soon.
Click to expand...
Click to collapse
I am on BlackSoulxxx latest LG G3 Tekcafe v5.3 D85530A-Full G5 ROM. Here's what I did to get the bars with 4g data. I tested it out in areas where there is no cell service and in areas where there is 1x or 3g and the 4g came back. I even made a backup of the ROM wiped and installed another marshmallow aosp rom and others. I then went to restore BlackSoulxxx ROM and 4g signal still came back.
Steps I did.
1. Tot'd back to stock 10b and rooted and installed twrp.
2. Flashed LG_G3_Flash2BackupEFS.zip of the 10b rom.
3. Wiped stock 10b and flashed the 10b G3_EFS_Flashable_Restore.zip that was created from the the LG_G3_Flash2BackupEFS.zip.
4. Flashed BlackSoulxxx rom and after it booted up I had signals but not data until I entered the Verizon APN manually see picture of what to enter. If mobile network is greyed out flash 35b bootstack.
5. I entered the verizon APN and selected CDMA then global I got the 4g icon with signal bars I changed the icon with a buildprop edit.
I just don't get signals while in 1x or 3g but data does work still and it will get 4g again if your in a 4g area. The phone does say T-CDMA 64. Here's a https://drive.google.com/file/d/0B-EyVOQK1xDAa0VmbERXcUlrV1U/view?usp=sharing to change it to Verizon Wireless courtesy of @xpirt.

netookska05 said:
I am on BlackSoulxxx latest LG G3 Tekcafe v5.3 D85530A-Full G5 ROM. Here's what I did to get the bars with 4g data. I tested it out in areas where there is no cell service and in areas where there is 1x or 3g and the 4g came back. I even made a backup of the ROM wiped and installed another marshmallow aosp rom and others. I then went to restore BlackSoulxxx ROM and 4g signal still came back.
Steps I did.
1. Tot'd back to stock 12b and rooted and installed twrp.
2. Flashed LG_G3_Flash2BackupEFS.zip of the 12b rom.
3. Wiped stock 12b and flashed the 12b G3_EFS_Flashable_Restore.zip that was created from the the LG_G3_Flash2BackupEFS.zip.
4. Flashed BlackSoulxxx rom and after it booted up I had signals but not data until I entered the Verizon APN manually see picture of what to enter. If mobile network is greyed out flash 35b bootstack.
5. I entered the verizon APN and selected CDMA then global I got the 4g icon with signal bars I changed the icon with a buildprop edit.
I just don't get signals while in 1x or 3g but data does work still and it will get 4g again if your in a 4g area. The phone does say T-CDMA 64. Here's a https://drive.google.com/file/d/0B-EyVOQK1xDAa0VmbERXcUlrV1U/view?usp=sharing to change it to Verizon Wireless courtesy of @xpirt.
Click to expand...
Click to collapse
Great job posting your step by step instructions. I've been able to achieve all of the same on a host of international ROMS however with a couple of caveots. I can either have SMS/MMS working properly, or break SMS/MMS and have internet with signal bars. Question about the file above. This will just modify the header, or will it specifically put you on the Verizon network?
Sent from my VS985 4G using XDA-Developers mobile app

b00ster23 said:
Great job posting your step by step instructions. I've been able to achieve all of the same on a host of international ROMS however with a couple of caveots. I can either have SMS/MMS working properly, or break SMS/MMS and have internet with signal bars. Question about the file above. This will just modify the header, or will it specifically put you on the Verizon network?
Sent from my VS985 4G using XDA-Developers mobile app
Click to expand...
Click to collapse
It'll change just the ROM from saying T-CDMA 64 to Verizon Wireless for Verizon users (VS985).

netookska05 said:
It'll change just the ROM from saying T-CDMA 64 to Verizon Wireless for Verizon users (VS985).
Click to expand...
Click to collapse
So when you go into the About Phone>Network, does it say Verizon Wireless for the network?

h910 3g issue

Just bought it, entered apn mannually and only get EDGE. stock firmware. Tried different carriers, no 3g at all, stuck on EDGE.
LTE doesn't exist in my region.

Flash the US996 KDZ and see if that works for you. Since there is no H910 KDZ, if you want to return the phone to an H910, you will have to root it, and then flash one of the H910 return to stock zips.
-- Brian

runningnak3d said:
Flash the US996 KDZ and see if that works for you. Since there is no H910 KDZ, if you want to return the phone to an H910, you will have to root it, and then flash one of the H910 return to stock zips.
-- Brian
Click to expand...
Click to collapse
Flashed, now it says : "Enter password to unlock, 30/30 attemts remaining"
hard reset helped, but still no 3g.

Well now that you are on US996 firmware, search for posts about enabling additional bands .. there are several around here and the hidden menus that you need will now be available.

runningnak3d said:
Well now that you are on US996 firmware, search for posts about enabling additional bands .. there are several around here and the hidden menus that you need will now be available.
Click to expand...
Click to collapse
in *#546368#*996# - field test - modem setting - rat selection - choosing any option and still 2g only, if I choose wcdma only - no service.
In "network mode" submenu only option that I succesfully can choose- "Automatic", anything else - "FAIL".

What carrier are you using? What bands do they support?
-- Brian
---------- Post added at 05:47 AM ---------- Previous post was at 05:44 AM ----------
You mentioned WCDMA .. is that the 3g tech your carrier uses? If so, you can try flashing the VS995 KDZ and might have better luck. The H910 is a GSM / LTE model.

Im using kyivstrar, ukraine. It is gsm-lte. Only 2g-3g in my region. 3g : 1965-1980/2155-2170 mhz. I thought wcdma is not cdma, but 3g.

Yea, talk about posting while asleep. You wrote WCDMA, I replied WCDMA, but all I saw was CDMA. Ignore that...
The H910 should be compatible without having to make any changes: link.
Hmmmm....
-- Brian

Yes, I checked frequencies before buying. Then double checked after got 2g-only. Changed sim, changed carrier, flashed us996, still 2g.