[Q] Q.vzw rom on sprint GS4 - Sprint Samsung Galaxy S 4 Q&A, Help & Troubleshoot

As I know both variants of Verizon and Sprint Galaxy S4 are the same.
Can I flash stock VZW GS4 ROM onto Sprint GS4?

You can flash any ROM that is for Verizon. But be sure you back up your APNs (if you don't know how to do that search your answer is out there). And have the correct spornt kernel. If its a TW 4.4.2 ROM download the corresponding kernel. Its its 4.3 TW then download that one. Etc.
You wipe data, install ROM, wide data again then install sprint kernel and reboot.
Sent from my SPH-L720 using Tapatalk

thanks
daniel4653 said:
You can flash any ROM that is for Verizon. But be sure you back up your APNs (if you don't know how to do that search your answer is out there). And have the correct spornt kernel. If its a TW 4.4.2 ROM download the corresponding kernel. Its its 4.3 TW then download that one. Etc.
You wipe data, install ROM, wide data again then install sprint kernel and reboot.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Thank you for fast response.
I mean can I flash stock vzw gs4 4.3 mk2 baseband ((VRUAMDK_NoWipe.tar firmware)) onto my sprint gs4 using odin?

mostafa770 said:
Thank you for fast response.
I mean can I flash stock vzw gs4 4.3 mk2 ((VRUAMDK_NoWipe.tar)) firmware [/URL]ROM baseband onto my sprint gs4 using odin?
Click to expand...
Click to collapse
Sorry I misunderstood your main question. Tars I am not sure of.
Why would you want to Odin a Verizon 4.3 tar when we have 4.3 and 4.4.2 tars?
Sent from my SPH-L720 using Tapatalk

vzw gs4 accept foreign SIM and RUIM even mk2 update, but sprint is locked and cannot unlock on mk2, must be mdc or mdl baseband and impossible to downgrade.and I just think this could solve the problem!!!

Related

Latest Update for AT&T I337?

I need latest update for Samsung Galaxy S4 AT&T I337 model as I live outside USA and for some reason when I click on Software Update (Settings -> About device) nothing happens.
Below is the details for Samsung Galaxy S4 AT&T I337 phone
Model Number - SAMSUNG-SGH-I337
Android Version - 4.3
Baseband version - I337UCUAMDL
Kernel version - 3.4.0_StockUp_tw_4.3
Build Number - StockUp MJ6 v1.1
I need some guidance on how I can update my phone to the latest updates that is available for AT&T I337 model
Look forward to getting some tips and guidance on this matter
Search for mk2 tar files
jd1639 said:
Search for mk2 tar files
Click to expand...
Click to collapse
I found the required file from this forum which was redirected to another download site as shown below
http://www.androidfilehost.com/?fid=23329332407566574
Do you I use the following instructiuon that is found in this forum
http://forum.xda-developers.com/showthread.php?t=2621279
1.POWER OFF YOUR PHONE AND GO TO DOWNLOAD/ODIN MODE ( VOLDOWN+HOME+POWER)
2.DOWNLOAD ODIN (http://forum.xda-developers.com/attachment.php?attachmentid=2537619&d=1390629800) AND MAKE SURE U HAVE THE LATEST DRIVER INSTALL FROM SAMSUNG KIES
3.DOWNLOAD AND EXTRACT I337MK2_Combined_Odin_Tar FILES
4.START ODIN AND FOLLOW IN ORDER WHERE EACH FILE SHOULD GO INTO ODIN SLOT....
I need confirmation if the above instruction is correct to get the latest update for Samsung Galaxy S4 AT&T i337 model?
You're currently on mdl firmware. This firmware allows you to put on a custom recovery and flash roms. Are you sure you want to update? You will no longer have the ability to put on a custom recovery.
jd1639 said:
You're currently on mdl firmware. This firmware allows you to put on a custom recovery and flash roms. Are you sure you want to update? You will no longer have the ability to put on a custom recovery.
Click to expand...
Click to collapse
Well not interested in custom recovery as long as I get the latest update that looks like offical Samsung Galaxy S4 updates for i337 model. Will I be getting latest update for future updates?
userS4i337 said:
Well not interested in custom recovery as long as I get the latest update that looks like offical Samsung Galaxy S4 updates for i337 model. Will I be getting latest update for future updates?
Click to expand...
Click to collapse
Yes to all your question.....i337MK2 tar md5 contain 4 seperated files ( first released ) follow the image guide where u have to place into ODIN SLOT ....the one that said combined ALL IN ONE ( newest released ) mean that u just flash into PDA ODIN SLOT ONLY.....just follow that guide on second post it would get u to latest ATT MK2 4.3 firmware. But like @jd1639 said with MDL firmware u can install anything even 4.4.2 rom and also there is alot of custom stock rom without ATT bloatware out there that u can install .....goodluck and PM me if u need more help. FYI if u got helped by someone please hit THANK button to show your appreciation ....:good::good:
I'll update my S4 to the latest update and you can send me yours. I'd kill for mdl firmware...
Sent from my SAMSUNG-SGH-1337 using Tapatalk
That is my another question regarding ATT bloatware? Will the combined TAR file contain the ATT bloatware?
Is there a way I can remove the ATT bloatware after I have upgraded the phone, as I find the ATT bloatware annoying
userS4i337 said:
That is my another question regarding ATT bloatware? Will the combined TAR file contain the ATT bloatware?
Is there a way I can remove the ATT bloatware after I have upgraded the phone, as I find the ATT bloatware annoying
Click to expand...
Click to collapse
Yes it contains all the bloatware, another reason not to upgrade and flash custom roms.
Edit, it has not been mentioned yet but one you upgrade you can not go back to a previous firmware.
When I upgrade to MK2, does this mean I will need to perform factory reset and all my existing app will be gone or will the app remain on the phone even after the upgrade.
I will do the backup before the upgrade but at the moment when I connect the Phone to the PC, it would mot pick up so maybe I will need the latest software driver, is that correct? I have the same problem with Kies which does not recognise when phone is connected.
Any suggestion would be great.
userS4i337 said:
When I upgrade to MK2, does this mean I will need to perform factory reset and all my existing app will be gone or will the app remain on the phone even after the upgrade.
I will do the backup before the upgrade but at the moment when I connect the Phone to the PC, it would mot pick up so maybe I will need the latest software driver, is that correct? I have the same problem with Kies which does not recognise when phone is connected.
Any suggestion would be great.
Click to expand...
Click to collapse
When you Odin I believe you lose everything anyway.
rbedell said:
When you Odin I believe you lose everything anyway.
Click to expand...
Click to collapse
Not always, most times a factory reset is needed to clear the phone of old apps and data. Root, is lost, but apps that require root can still be present which can become a problem when root is no longer available.
A friend of mine has a rooted MDL firmware s4 and wants a rooted stock version of the latest update. Can someone please provide a link to the latest flashable stock ROM for the att s4? Thanks.
Sent from my Nexus 5 using xda app-developers app
Henrock11 said:
A friend of mine has a rooted MDL firmware s4 and wants a rooted stock version of the latest update. Can someone please provide a link to the latest flashable stock ROM for the att s4? Thanks.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Why doesn't your friend flash a custom rom instead
He wants a stock touchwiz ROM. If their is a custom ROM based on the latest firmware then by all means direct me to it and I'll flash that for him. Thanks.
Sent from my Nexus 5 using xda app-developers app
Henrock11 said:
He wants a stock touchwiz ROM. If their is a custom ROM based on the latest firmware then by all means direct me to it and I'll flash that for him. Thanks.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
He's on mdl which allows a custom recovery and easy flashing of roms. If he upgrades to mk2, the latest, he'll lose that ability. Try this http://forum.xda-developers.com/showthread.php?p=47713264
Right, we have a custom recovery and an unlocked boot loader and I flashed an older build of that Google edition ROM, but he just really wants the ability to move his apps2sd. I didn't see a mention of the apps2sd feature in the change logs. Thanks for replying so quickly.
Sent from my Nexus 5 using xda app-developers app

[Q] S4 / can I downgrade?

I have a S4 on MK2 on AT&T
The fact that I am stuck on TW is depressing. And to top things off AT&T has disabled WIFI tethering, which I was using occasionally.
Is it possible to ODIN back to stock and the firmware the phone came with a year ago?
Is it correct that the originally firmware would allow me to flash Cyanogen / Task etc?
What firmware do I need to get? I understand MF3 is also bad?
You cannot downgrade.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
wavemaster00 said:
I have a S4 on MK2 on AT&T
The fact that I am stuck on TW is depressing. And to top things off AT&T has disabled WIFI tethering, which I was using occasionally.
Is it possible to ODIN back to stock and the firmware the phone came with a year ago?
Is it correct that the originally firmware would allow me to flash Cyanogen / Task etc?
What firmware do I need to get? I understand MF3 is also bad?
Click to expand...
Click to collapse
As stated above, you can't downgrade. You can enable tethering by the thread in the general section and use Safestrap to change to other TW ROMs like Foxhound which has AOSP theming.
Sent from Black<3's I337 running Hyperdrive
You could only downgrade from 4.3 if you were using the leaked 4.3 ROM with the MJB bootloader. The official OTA 4.3 updates cannot be downgraded as Samsung blew a "qfuse" with this major (4.3) update preventing reversion of the bootloader.
However, you can change or downgrade the actual ROM filesystem, provided that you keep your MK2 boot loader in place. That means that you can't revert to a pre 4.3 stock ROM but you can use custom ROMs that are 99% stock while restoring the functionality that you'd like to restore.
.
.

AT&T S4 on Tmobile - Custom Rom?

Hello,
I have an AT&T S4 that I want to run on Tmobile. It was running Android 4.3/MF3 baseband so I was able to install safestrap and root it. I am running the stock rooted ROM (with SIM unlock via region lock away) and the QCN file update to get 4G LTE/HSPA and 3G.
I would like to install a custom ROM but each time I do I get a bootloop. I am installing via safestrap in a slot I created NOT the stock rom slot. But as I said each time I try to boot I get a boot loop and have to return to the stock rooted rom via the stock rom slot. I got wicked rom to load but Wifi didn't work.
Am I able to install tmobile ROMS on this device (I want to be able to tether)? How do I do that? Which kernel do I use, the ATT or tmobile kernel? Do I install the ROM in the stock slot or the safestrap virtual slot?
I don't want to wind up with a device I cannot use on tmobile. Also, my computer does not see the S4 any longer. It sees my Note 3 fine but when I plug in the S4 it doesn't show as a device.
Which custom rom were you attempting to install? Was it a 4.2.2 touchwiz rom?
Kaze105 said:
Which custom rom were you attempting to install? Was it a 4.2.2 touchwiz rom?
Click to expand...
Click to collapse
Wicked
I'm running 4.3 so does that mean I can only run 4.3 ROMS in the virtual slot?
My baseband ends with MF3 and my build number ends in MK2. What are my opitons?
nesta17 said:
Wicked
I'm running 4.3 so does that mean I can only run 4.3 ROMS in the virtual slot?
My baseband ends with MF3 and my build number ends in MK2. What are my opitons?
Click to expand...
Click to collapse
If your build number is MK2, you're on 4.3. You need Safestrap 3.71, and you can only run other 4.3 Touchwiz ROMs. Kernel doesn't matter because Safestrap does not flash kernels. You should be fine flashing any TMobile 4.3 TW ROM.
DeadlySin9 said:
If your build number is MK2, you're on 4.3. You need Safestrap 3.71, and you can only run other 4.3 Touchwiz ROMs. Kernel doesn't matter because Safestrap does not flash kernels. You should be fine flashing any TMobile 4.3 TW ROM.
Click to expand...
Click to collapse
We can flash TMOBILE ROMS on this ATT s4?
Sent from my SGH-M919 using XDA Premium 4 mobile app
bstylz911 said:
We can flash TMOBILE ROMS on this ATT s4?
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can flash ROMs from any variant, they just may not work as well and you have to make sure you flash a kernel that matches your phone afterwards (Tmobile rom, but kernel from AT&T section)
DeadlySin9 said:
You can flash ROMs from any variant, they just may not work as well and you have to make sure you flash a kernel that matches your phone afterwards (Tmobile rom, but kernel from AT&T section)
Click to expand...
Click to collapse
But right now I have a T-Mobile kernel and it runs fine. When I flash an att kernel my MMS stops working.
Hyperdrive T-Mobile compatibility pack with T-Mobile ktonnz. Att unlocked s4 with T-Mobile sim card
Sent from my SGH-M919 using XDA Premium 4 mobile app
My settings with my phone.
Sent from my SGH-M919 using XDA Premium 4 mobile app

[Q] i have CWM Req0very/rooted i337 on 4.2.2 but dont know how to upgrade to 4.4.4

i just recently purchased this i337 and it was rooted and had OUDhs CWM Touch Req0very v1.0.3.4 installed how do i upgrade to a 4.4.4 rom? i am new with S4 roms/flashes.
Please direct me in the right direction
elchingon said:
i just recently purchased this i337 and it was rooted and had OUDhs CWM Touch Req0very v1.0.3.4 installed how do i upgrade to a 4.4.4 rom? i am new with S4 roms/flashes.
Please direct me in the right direction
Click to expand...
Click to collapse
Find any 4.4.4 ROM and flash it. You will need a 4.4 modem also I believe, so find a recovery flashable one. Don't use Odin for it, just to be safe and not upgrade your bootloader.
Sent from my SGH-I337
DeadlySin9 said:
Find any 4.4.4 ROM and flash it. You will need a 4.4 modem also I believe, so find a recovery flashable one. Don't use Odin for it, just to be safe and not upgrade your bootloader.
Sent from my SGH-I337
Click to expand...
Click to collapse
where can i find a 4.4 modem, once i found a 4.4 modem do i flash it first or the rom First? so meaning if flashed thru Recovery it wont upgrade my bootloader correct?
Thanks in advance for the help
elchingon said:
where can i find a 4.4 modem, once i found a 4.4 modem do i flash it first or the rom First? so meaning if flashed thru Recovery it wont upgrade my bootloader correct?
Thanks in advance for the help
Click to expand...
Click to collapse
Here are the modems available
http://forum.xda-developers.com/showthread.php?p=46762296
Flash before the rom
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Here are the modems available
http://forum.xda-developers.com/showthread.php?p=46762296
Flash before the rom
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
jd1639,
Do i flash the MDL one or the one more upto date 9-18-2014 (ATT NI1 KK MODEM
9-18-2014) currently my phone says Baseband: 1337UCUAMDL
So once i flashed the modem do i reboot then install rom? or one after the other.
i was looking at the http://forum.xda-developers.com/showthread.php?t=2447482 rom.
is there a difference between the ones that say safestrap/twrp or need one just for the i337 with CWM?
elchingon said:
jd1639,
Do i flash the MDL one or the one more upto date 9-18-2014 (ATT NI1 KK MODEM
9-18-2014) currently my phone says Baseband: 1337UCUAMDL
So once i flashed the modem do i reboot then install rom? or one after the other.
i was looking at the http://forum.xda-developers.com/showthread.php?t=2447482 rom.
is there a difference between the ones that say safestrap/twrp or need one just for the i337 with CWM?
Click to expand...
Click to collapse
I'd flash the ni1 modem. Then boot, then flash the rom.
Sent from my Nexus 5 using XDA Free mobile app
I will give it a try to tonite after work then post if it works. thanks
i flashed modem booted. went back to recovery did nandroid backup.
wiped Data factory reset
wiped cache
wiped dalvik cache
flashed rom
installed
data nor wifi worked??

[Q] Upgrade SGH I337 to Andriod kitkat

Hello,
I have samsung SGH I337 phone and its not rooted. I bought this phone in Sep 13 and unlocked with some code. Currently its stuck at 4.2.2. and I want to upgrade the phone to latest 4.4.* . As I unlocked the phone, this stopped getting update from ATT and dont show any available updates.
Can someone share the process to upgrade to latest kitkat ?
First, if you're on mdb or mdl firmware you might want to reconsider upgrading. If you are you have the ability to use twrp or cwm custom recoveries and easily flash roms
But if you still want to go ahead and update then flash the nb1 tar file in Odin http://forum.xda-developers.com/showthread.php?p=50912149
This will wipe your device so backup anything on your internal sdcard. You will not lose the sim unlock.
Sent from my Nexus 5 using XDA Free mobile app
My S4 build number is JDQ39.I337UCUAMDL.
Forgive my ignorance but can you tell me what is the significance of mdb or mdl firmware. Also does upgrading the Android would create any issues on my phone.
Need one more information on Kitkat version i.e. which kitkat version is stable and has no issues.
sanstorm1979 said:
My S4 build number is JDQ39.I337UCUAMDL.
Forgive my ignorance but can you tell me what is the significance of mdb or mdl firmware. Also does upgrading the Android would create any issues on my phone.
Need one more information on Kitkat version i.e. which kitkat version is stable and has no issues.
Click to expand...
Click to collapse
You're on mdl firmware. There are users here who would love to be on that firmware version. Being on mdl allows you to run custom recoveries. With newer firmware you can only use safestrap as a custom recovery which limits what you can flash.
Edit, once you go to nb1 firmware you will not be able to go back to mdl.
But you said you're not rooted and have not run custom recoveries. So if that is not important to you then flashing the nb1 firmware will up grade you to 4.4.2 kk.
Sent from my Nexus 5 using XDA Free mobile app
sanstorm1979 said:
My S4 build number is JDQ39.I337UCUAMDL.
Forgive my ignorance but can you tell me what is the significance of mdb or mdl firmware. Also does upgrading the Android would create any issues on my phone.
Need one more information on Kitkat version i.e. which kitkat version is stable and has no issues.
Click to expand...
Click to collapse
If you upgrade to 4.4.4, and want to flash custom roms you'll have to use safe strap. If you keep 4.2.2 you can flash 4.4 roms also. I wouldn't recommend updating, but it's your choice.
Sent from my SGH-I337 using XDA Free mobile app
jd1639 said:
You're on mdl firmware. There are users here who would love to be on that firmware version. Being on mdl allows you to run custom recoveries. With newer firmware you can only use safestrap as a custom recovery which limits what you can flash.
Edit, once you go to nb1 firmware you will not be able to go back to mdl.
But you said you're not rooted and have not run custom recoveries. So if that is not important to you then flashing the nb1 firmware will up grade you to 4.4.2 kk.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
i am on the mf3 firmware.i want to upgrade to 4.4.2 whats the best way.have been reading on this for 2 weeks it just keeps getting confusing.

Categories

Resources