Related
Ive tried the volume down and volume and power but it wont work.... Any suggestions?
You are sure your phone is off and you:
Hold down the volume up and down with your left thumb and make sure there is a click feeling from both buttons and use your right hand to click on the power button?
I'm having the exact same problem. Have tried about 25 times to boot into recovery. Just does not work.
Pull the battery after every failed attempt took me about 2-3 tries. Before you do anything shut off phone pull battery then attempt to boot into recovery.
Yes, I'm doing that. The samsung screen comes up and if I release the buttons it does the normal boot up. If I keep holding the buttons the black screen with "vibrant" keeps coming on and off.
So far I discovered that it works perfectly if you hold the power button until after the Vibrant logo appears and then release the power button while still holding the both volume buttons. If you release the power button before the logo appears it will FAIL.
Only after the logo dissapears you can release the volume buttons.
In other words:
1-Press and hold both Volume buttons
2-Press and hold Power button
3-After Vibrant logo appears release Power button
4-Wait until Vibrant logo dissapears and then release Volume bottons
5-You should now be in recovery
Pito
Wow, I followed your directions step by step and still no luck! I wait till I the Vibrant logo to dissapear to release the volume buttons but it just boots up like normal. Thanks anyways! Is there another way of rooting my phone?
What I do as well is hold until the first logo dissapears and as soon as the second one appears release buttons. Then its in recovery.
Ive tried everything you all have said so far and I still cant get my phone into recovery mode. I was able to do it on my wife's vibrant but not on mine. Any suggestions?
Try getting quick boot from the market. It had an option to reboot into recovery. If your problem is just getting the button push right (i had real trouble with it at first) then this should work.
Sent from: Sammy Vibe Rooted
ROM: Stock
Recovery: Clockwork 2.5.0.4
If you are rooted then Clockwork Recovery Mod has the ability to boot into recovery mode. Or you can turn on usb debugging and use adb. Start>Run>cmd and use "adb reboot recovery"
Sent from my SGH-T959
I noticed a lot of people having trouble booting into recovery mode from the phone. This is how to do it. With the phone turned off hold the power button +vol down button until you see the "Vibrant" logo on the screen. Once you see the logo, take your finger off the power button but keep pressing the vol down untill you see the recovery image. Ive tried every other way that people have posted and this is the only way I could get it to work. Sorry if this is already posted somewhere else but I couldnt find it. Hope this helps.
Open terminal emulator
Code:
su
reboot recovery
....Or are you not rooted yet?
And you have to hold its BOTH volume buttons not just volume down to boot into recovery.
- Hold both volume buttons
- Press power button
- When vibrant comes up, let go of power but continue to hold the two volume buttons
- Bam Recovery
I always let go of all the buttons when the Vibrant logo comes up, and it goes to recovery just fine.
Mr_Tricorder said:
I always let go of all the buttons when the Vibrant logo comes up, and it goes to recovery just fine.
Click to expand...
Click to collapse
I can second this. I am my own little vulcan deathgrip to press them all at the same time though, and still be able to release without dropping the phone.
You could also download quick reboot from the market for those already rooted, it has an option to reboot into recovery.
Sent via my Vibrant with Tapatalk Pro
ju5tiiv said:
You could also download quick reboot from the market for those already rooted, it has an option to reboot into recovery.
Click to expand...
Click to collapse
This ... or use the Reboot Into Recovery option from the Clockwork ROM Manager, which I would expect most Vibrant users to have right now if they're rooted.
What if none of this works?
I've a Vibrant (one week old) rooted. Clockwork installed KiNgxKernel-Vib-3-2.6.29.6 etc. However unless I use clockwork I can't get into recovery mode. Would really like to know a working key press combo if possible.
I read somewhere about some Vibrants being hardware locked. Assuming this is true perhaps that's what this phone is.
Im trying to flash a new ROM but cannot seem to enter recovery mode:
I had revolver 3.6 and wanted to upgrade to the latest, so I held down power and selected recovery, now its in some type of rebooting cycle where it tries to boot up with the "Eee Pad" in the center and the "ASUS/NVidia" at the bottom, this stays on for about 3 secs then it appears to power off and the cycle starts again.
Holding down just the power button seems to do nothing, but if I hold power+volUP for a few seconds it seems to make it power off for good. From this powered down state, pwr or pwr+volUP does nothing. From this powered down state pwr+volDown brings up the boot screen + the small white letters in the upper right saying to hit volUp within 5 secs to enter RCK but if you do this then you get the reboot loop all over. If you let it sit there Itll allow you to either coldboot or eraseuserdata+cold boot. This allows the tablet to boot up normally.
But I just can never seem to boot to recovery. I have revolver parts and the reboot2recovery and the recoveryinstaller.apk all installed. What am I missing?
What about cwm? Sounds like you still on stock recovery.
How did you root? And how did you flash recovery? Were you ever able to get into recovery?
My gut tells me your recovery isn't compatible with your bootloader and/or boot.img.
Thanks for the help. I don't think i loaded cwwm when i originnally rooted. I reded rooting and it put cwm5 on.
I unlocked the bootloader and flashed a custom recovery. I then rebooted the device. Now it is stuck at the bootloader (white Google logo on black background) and I can't get it to do anything else. I've rebooted it a bunch of times including with the vol + and vol - buttons held down to no avail. I've also let the battery run out and then tried to boot it up again and the same thing happens. adb nor fastboot see the device and it doesn't show up in the logs on my machine (Mint 13) as coming online at any time.
Most of the times I reboot it with the power switch it reboots to the Google logo even without me letting go of the power button. Sometimes I can get it to fully power off but I haven't figured out what combination of vol keys and reboot does that.
Anyone have any ideas what could be wrong? Any help would be much appreciated!
You are not bricked if you can still get into the bootloader.
Download the factory image from here, and flash it with fastboot. If you don't know how to do that, read this thread.
I wish I could get fastboot to see it then I could definitively flash that img.
I can't get into the bootloader and can't get fastboot or adb to see it. It's stuck at the Google logo now and when i hold the power key it reboots back to the Google logo with the unlock logo at the bottom.
Thanks for the help
You've tried holding volume down+power for 10+ seconds? That should power off the device, then hold both vol up+down down and power up
Ya I've tried to hold vol + and power for 10+ seconds and it reboots back to the Google logo even if I don't off the power key. Same happens with all the other combinations of keys being held with the power button. I can't get it to turn off now unless I let the battery die
Press and hold power till screen goes black. Then quickly press power+volume down and HOLD.
Sent from my Nexus 7
Tried that and still stuck at the Google logo. I have to go to work for a couple hours and then will hack on it when I'm back. Hope I don't have to deal with Googles rma process seeing how disorganized the rest of that company is
Sent from my HTC one s
No luck with any button combos but the vol + and power actually turned it off. All out of ideas over here. I'm thinking it really is bricked
I'm in the same spot. I can get it into recovery occasionally but once there it locks up after trying to flash or clear the cache.
I'm wondering if a contributing issue is CMR v6.0.0.6? I updated it from 6.0.0.4 that was running fine. But no fastboot or adb so that is doubtful.
This is frustrating and not a great start with this N7.
thank you
giveen said:
Press and hold power till screen goes black. Then quickly press power+volume down and HOLD.
Sent from my Nexus 7
Click to expand...
Click to collapse
this worked. you have to be fast. as soon as screen goes black release power button then quickly, very quickly repress along with vol up and down.
You will still be able to get into the bootloader! Force kill the tablet by holding the power button for ages. Then hold volume up and volume down and the power button together, which will boot to fastboot.
It looks like a CWM bug as I feared. Anyone in the same boat try here - http://forum.xda-developers.com/showthread.php?t=1782932
Nothing has worked and I've literally tried everything that those three buttons can do. Thanks again for all the help guys. Had a great time trying to resurrect it but guess it's time for it to go back home
Just as I suspected. Google puts out buggy junk once again.
I just wanted to report a similarly event. I have a rooted, unlocked Nexus 7, with TWRP recovery. I have previously rebooted without issue. Tonight I booted into bootloader mode to check something and the hit power button to choose start. I got stuck on the boot logo. After finding this thread, I started with the simplest combination and held power button until screen went dark, then added volume down and once again in bootloader. This time choosing start led to a regular system boot. It's as if the device froze and needed a hard reboot.
Sent from my SCH-I535 using Tapatalk 2
I was attempting to boot into recovery and kept getting the 'Google' logo (I am unlocked/rooted with twrp recovery). I wasn't aware that one had to be plugged in via usb in order to *not* hang....
Any way around this?
Once I plugged it in and attempted to boot into recovery it worked fine.
I had a similar issue after using the Nexus Root Toolkit to flash to nakasi 4.2 with CWM recovery - just got stuck on the nexus boot screen, flashing in a loop for over 15 minutes.
I ended up powering down the device, holding power for about 5-10 seconds - then QUICKLY holding both the power and volume up+down keys, it then went into the fastboot screen.
After it was there, plugged it into my PC.
Now, this should work for you - assuming you have all the fastboot/usb driver stuff installed.
I extracted the contents of nakasi-jop40c-factory-6aabb391.tgz into the same directory as the fastboot.exe provided by WugFresh with his Nexus Root Toolkit (google search or xda search for this if you dont have it, i dont think i can post links due to my low postcount) - typical filepath: C:\Program Files (x86)\WugFresh Development\data
By the files in there, I mean drilling down inside the tgz to where the image files were inside so that files like bootloader-grouper-4.13.img, image-nakasi-jop40c.zip etc were extracted into the directory and sitting alongside the fastboot.exe - NOT in a subfolder.
Once its all here, running flash-all.bat (this is provided by google in the nakasi-jop40c-factory-6aabb391.tgz) from the command line or by double clicking on it from explorer should kick off the process. After about 2-3 minutes, it was complete, and my Nexus then booted up within about 3 minutes after that.
Also worth noting, device remained unlocked, but I lost root/root binary
Sorry if this post is redundant, but the methods I've seen haven't worked, so I can't be alone. Here is how to boot into TWRP if your phone is boot looping/soft bricked. (info pulled from here, of all places.)
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times, like it says. Even though it says it will delete everything, it won't (I can confirm that if you are at least on v2.6.3.2).
6. After a "factory reset processing" appears, you should get the TWRP flash screen, and you are good to go.
Hope this helps someone besides currently frustrated me.
I LOVE YOU! I honestly didn't think this would work but it does and i'm so happy.
just about to make a thread asking how to do this. Glad I searched. way to make you jump through hoops tho.
thanks for this. for me the phone didnt even have to be completely powered off.
i wa sin a sleep of death so i held down power and vol down until lg logo appeared let go and then pressed power again. pressed power 3 more times and it booted into recovery
nm
This thread should be stickied in Q&A
jadengore said:
Sorry if this post is redundant, but the methods I've seen haven't worked, so I can't be alone. Here is how to boot into TWRP if your phone is boot looping/soft bricked. (info pulled from here, of all places.)
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times, like it says. Even though it says it will delete everything, it won't (I can confirm that if you are at least on v2.6.3.2).
6. After a "factory reset processing" appears, you should get the TWRP flash screen, and you are good to go.
Hope this helps someone besides currently frustrated me.
Click to expand...
Click to collapse
You're a lifesaver.
commissionerg said:
You're a lifesaver.
Click to expand...
Click to collapse
Thank you, doing my best to help out.
Sent from my LG-D800
Awesome. Didn't know this!
Thanks
@jadengore : I was stick in a bootloop, and your thread helps me a lot !
Big thanks !
:good:
Also, if you're too scared to try that, I've had success using rom toolbox to reboot into recovery. Of course this is assuming you have a working system.
Thanks very much, but...
Hello,
I unfortunately dropped my VS980, cracked the screen, and the digitizer only works on the bottom portion of the screen. I have a new screen coming, which should fix this issue, however I would like to get my data off my phone (pics), but I can't as I have a password (draw a line/shape kind) and without being able to enter this in, it will not connect to my PC as mass storage.
I was hoping to be able to boot into recovery with hardware buttons and get my data that way, not sure if that is possible either, but at least try it. This I found to work to get me to the factory hard reset screen, but I am skeptical to push the power button and have it wipe my data!
I am open to other options to get to my data if anyone has any, including android device manager which is something I have thought of, but not sure if I can reset the security to nothing, or maybe as the bottom portion of my digitizer seems to work, I can enter in a space or a period for a password and enter that in.
Looking for any guidance!
Thanks!
Got it!
Redid the password with android device manager, which got me in, but I didn't even need to do that as I had the brainwave to plug a mouse in with a usb adapter. Works flawlessly, got my data, now just waiting for replacement screen!
Strange Problem
I am using F-320K[G2], Cloudy G3 Rom, when I hit boot into recovery it does bring me to TWRP but hardware buttons doesn't work. It just restarts the phone.
Vol down+Power till LG logo up, release and press and hold again and after few secs it restartsand came back to LG screen. If I continue to held it it just repeat restating.
hardware keys to enter recovery. voldown+power then volup+power
RevoDSG said:
I am using F-320K[G2], Cloudy G3 Rom, when I hit boot into recovery it does bring me to TWRP but hardware buttons doesn't work. It just restarts the phone.
Vol down+Power till LG logo up, release and press and hold again and after few secs it restartsand came back to LG screen. If I continue to held it it just repeat restating.
Click to expand...
Click to collapse
steps to enter recovery that worked for my Sprint LG G2 on ZVC firmware.
1) hold power and volume down button till you see LG logo -- quickly release these buttons and
2) immediately hold power and volume up buttons to enter into factory reset menu.
Then 3 presses of power key to confirm wipe and enter TWRP recovery. :good:
I was going mad trying to enter recovery for an hour. It appears like different models/software versions have different key combinations for entering recovery mode.
My phone was stuck at lg logo screen and i didnt have nandroid backup of the phone. so couldn't try the TOT restore method too as i waned my phone data.
Another way to get to Custom Recovery
krezee said:
steps to enter recovery that worked for my Sprint LG G2 on ZVC firmware.
1) hold power and volume down button till you see LG logo -- quickly release these buttons and
2) immediately hold power and volume up buttons to enter into factory reset menu.
Then 3 presses of power key to confirm wipe and enter TWRP recovery. :good:
I was going mad trying to enter recovery for an hour. It appears like different models/software versions have different key combinations for entering recovery mode.
My phone was stuck at lg logo screen and i didnt have nandroid backup of the phone. so couldn't try the TOT restore method too as i waned my phone data.
Click to expand...
Click to collapse
The way that let me get into custom recovery is different.
I hold 'vol up+power+vol down' to start from turned off state and keep holding it[Don't leave just keep holding the 3 buttons]. It doesn't show factory reset screen, it get me into TWRP[Custom Rom] directly. I heard 3 buttons gets u in safe mode IDK but I got into proper working TWRP.
RevoDSG said:
I am using F-320K[G2], Cloudy G3 Rom, when I hit boot into recovery it does bring me to TWRP but hardware buttons doesn't work. It just restarts the phone.
Vol down+Power till LG logo up, release and press and hold again and after few secs it restartsand came back to LG screen. If I continue to held it it just repeat restating.
Click to expand...
Click to collapse
I have a F320S.
Hold Volume up and press the Power Button,when comes Lg Logo release the Power Button and start the TWRP
if anybody's looking for the information in this thread like i was, and the posted method doesn't work (it did not for me):
1. Power off
2. Hold volume down and power
3a. release both at logo AND press BOTH at logo right after releasing
4a. Enter recovery
You should enter recovery, but if not...
3b. Keep the buttons pressed (your phone might continue into the start animation, but if you keep the buttons press it will return)
4b. The first logo will appear. Release both and press BOTH
5. Enter recovery
hope this helps someone
http://forum.xda-developers.com/showpost.php?p=45901939&postcount=3
jadengore said:
Sorry if this post is redundant, but the methods I've seen haven't worked, so I can't be alone. Here is how to boot into TWRP if your phone is boot looping/soft bricked. (info pulled from here, of all places.)
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times, like it says. Even though it says it will delete everything, it won't (I can confirm that if you are at least on v2.6.3.2).
6. After a "factory reset processing" appears, you should get the TWRP flash screen, and you are good to go.
Hope this helps someone besides currently frustrated me.
Click to expand...
Click to collapse
this worked omg...thanks a million...
Just wanted to contribute here in case anyone else had tried everything listed in this thread and still was unable to boot into TWRP.
I'm on Sprint, stock, rooted ZVE, and I have TWRP 2.7.
1. Power off phone, wait a few seconds to make sure phone is completely off.
2. Hold power and volume down.
3. As soon as LG logo appears, KEEP holding down power... BUT release volume down and SWITCH to holding volume up.
4. After a few seconds, screen appears saying "Recovery mode" and TWRP opens up after that.