Related
Hi all,
My Google-fu is failing me and I'm not certain of the best route to take a Galaxy S4 SGH-I337 AT&T 4.2.2 MF3 (Rooted with Motochopper) up to the new AT&T 4.3 firmware.
Can anyone point me in the direction of a guide for doing this? Everything I'm reading seems like I'll have to sacrifice my root, flash to stock with Odin, and then wait for AT&T to re-release the OTA update to 4.3. Am I off base?
Motochopper cannot root MF3. We're you able to hold root when you upgraded and are hoping to keep root again?
At the moment yes you will have to sacrifice root. I did. Root keeper does not support android 4.3 and keeping with SuperSU does not work either.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
CAG-man said:
Motochopper cannot root MF3. We're you able to hold root when you upgraded and are hoping to keep root again?
At the moment yes you will have to sacrifice root. I did. Root keeper does not support android 4.3 and keeping with SuperSU does not work either.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
I'm just gonna wait until a stock 4.3 rom comes out that supports safestrap so I can keep root
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
mrpeters said:
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
Click to expand...
Click to collapse
Since you are rooted with a custom recovery you CAN flash 4.3 now without losing root. Just use ShoStock-i MJ9 4.3http://forum.xda-developers.com/showthread.php?t=2468860
Or VisionX MJ9 4.3 http://forum.xda-developers.com/showthread.php?t=2391142
Or Deadly Venom MJ9 4.3 http://forum.xda-developers.com/showthread.php?t=2503692
and POSSIBLY a couple other 4.3 Touchwiz firmwares that are found in the Android Development Section
These are all from he International MJ9 firmwares but to me are better than the ATT firmwares for 4.3. The ATT 4.3 removed the Data Toggle completely from the pulldown menu and now you have to go into settings each time to turn it on or off. Plus other changes that are solely LACKING compared to the international firmwares. I have tried two of the above and they are both great and the third from what I have read works great as well. They are all great devs. Try them out and I suggest using the Jeboo 3.0 kernel for best results.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
I concur with RockRatt. Shostock-I is smooth. It is bundled with jeboos 3.0 kernel. Love it. Biased, though. I've been using Sho's roms since my/his s2 days..
Sent from my TARDIS
If "mrpeters" is MF3 he can't and shouldn't try flashing a 4.3 rom cause our MF3 Safestrap don't support it at the moment.
Sent from my ATT S4 MF3 using Tapatalk
mrpeters said:
Hi all,
My Google-fu is failing me and I'm not certain of the best route to take a Galaxy S4 SGH-I337 AT&T 4.2.2 MF3 (Rooted with Motochopper) up to the new AT&T 4.3 firmware.
Can anyone point me in the direction of a guide for doing this? Everything I'm reading seems like I'll have to sacrifice my root, flash to stock with Odin, and then wait for AT&T to re-release the OTA update to 4.3. Am I off base?
Click to expand...
Click to collapse
mrpeters said:
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
Click to expand...
Click to collapse
jball said:
If "mrpeters" is MF3 he can't and shouldn't try flashing a 4.3 rom cause our MF3 Safestrap don't support it at the moment.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
I only gave the advice above because he said he is ROOTED WITH MOTOCHOPPER ON MF3. As we know MF3 cannot be rooted with motochopper. So I was guessing that he rooted while on MDL or MDB with motochopper and used a ROM to upgrade to MF3.
So unless he is/was mistaken with those comments and he meant to say rooted on MF3 with safestrap then I would of told him to look at the safestrap threads.
Hopefully he clears things up with that as I WON'T want to give him Bad Advice.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
I didn't quote anybody for a reason.just stating facts based on my reading the OP post.its all good
Sent from my ATT S4 MF3 using Tapatalk
Yea there's a difference between having a phone shipped with MF3 and having upgraded to MF3
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
My phone stock was MDL and I took the OTA to MF3.
MF3 is MF3
Every time I read a thread anyone starts I also read the profiles of all the people in the threads posted.no clear mention of his base in his profile
Sent from my ATT S4 MF3 using Tapatalk
My phone was not MF3 stock. It got upgraded sometime after I rooted. To be completely honest, I'm not sure how. Kies maybe?
All I know is I still have root If I have to wait where I'm at, no big deal!
mrpeters said:
My phone was not MF3 stock. It got upgraded sometime after I rooted. To be completely honest, I'm not sure how. Kies maybe?
All I know is I still have root If I have to wait where I'm at, no big deal!
Click to expand...
Click to collapse
well my touch screen has stopped working, so now this phone gets to go back to AT&T for repairs.
whats the best way to remove root and factory default it?
sorry to bump an old thread, but I wanted to see if anything had changed so I could upgrade from my rooted 4.2.2 I337UCUAMF3 to one of the newer OS versions that are out. This phone was a warranty replacement, but I had no trouble rooting it with Motochopper when I got it so I don't think it came stock with MF3, but its been 6 months so I can't say for certain.
mrpeters said:
sorry to bump an old thread, but I wanted to see if anything had changed so I could upgrade from my rooted 4.2.2 I337UCUAMF3 to one of the newer OS versions that are out. This phone was a warranty replacement, but I had no trouble rooting it with Motochopper when I got it so I don't think it came stock with MF3, but its been 6 months so I can't say for certain.
Click to expand...
Click to collapse
You could flash the md3 tar and return it to stock. Then let out update itself. You'll lose root and you'll want to read some of the threads on the general section dealing with mk2 and nb1 before you do so so you know what you're getting in to
Sent from my SAMSUNG-SGH-I727
jd1639 said:
You could flash the md3 tar and return it to stock. Then let out update itself. You'll lose root and you'll want to read some of the threads on the general section dealing with mk2 and nb1 before you do so so you know what you're getting in to
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
10-4. I don't want to lose root, so that's key. I should have clarified that. I use too many apps (LightFlow, NoBloat, Titanium, etc.) that I wouldn't want to give up.
mrpeters said:
10-4. I don't want to lose root, so that's key. I should have clarified that. I use too many apps (LightFlow, NoBloat, Titanium, etc.) that I wouldn't want to give up.
Click to expand...
Click to collapse
You could flash 4.3 MK2 with odin then root with saferoot.
The 4.3 tar can be found here http://d-h.st/wH3 The pit here http://d-h.st/5gz
Saferoot can be found here http://forum.xda-developers.com/showthread.php?t=2565758
jball said:
My phone stock was MDL and I took the OTA to MF3.
MF3 is MF3
Every time I read a thread anyone starts I also read the profiles of all the people in the threads posted.no clear mention of his base in his profile
My MDL updated itself when I went back to stock and forgot to disable OTA. Now that I'm locked into TW, is there a reason NOT to update to MK2? I know that it will install KNOX but with saferoot and safestrap, I'll have the same functionality of my rooted MF3?
Click to expand...
Click to collapse
I am at the same place in my phone. Were you ever able to update to 4.3 I need to do the same to have access to certain options and apps
Hello,
First off I am very new to this. I always try to be as careful as possible and do as much research as I can. I follow all the steps as directed and ask questions ahead of time before screwing things up.
My problem now is I accepted an OTA update to 4.3 from what I thought was a stock 4.2.2. Apparently I was wrong and the superUSER app was still installed on my phone. I no longer have the ability to use my WiFi- (I switch the toggle and it just stays off) I have tried to reset and restore. I have tried to delete all data and re-install. I have tried everything I'm comfortable with at this point. I dont know if I should try using ODIN to flash stock since I probably have a knox bootlocker and dont want to do more damage. I am posting photos because I noticed my naseband and my build number don't match up. I am afraid im stuck in between 4.2.2 and 4.3. I would greatly appreciate any advice or even a push in the right direction. I have been searching trying to find a solution for over a month and the most I can get is... "your an idiot, dont update OTA while rooted, etc etc" Hindsight is 20/20. Thank you again for your time.
[/ATTACH]
Try flashing a 4.3 rom.
beerbq said:
Try flashing a 4.3 rom.
Click to expand...
Click to collapse
Stock 4.3? Just usin ODIN or what? Sorry I know that this is probably a lot simpler than I am making it.
bumblingfool said:
Stock 4.3? Just usin ODIN or what? Sorry I know that this is probably a lot simpler than I am making it.
Click to expand...
Click to collapse
I am not an expert but from what Im seeing your on a 4.3 rom but the modem did not update. Your modem is still mf9. I would flash a 4.2 rom and go from there. I don't want to give the wrong info hopefully someone can chime in that knows more than me.
beerbq said:
I am not an expert but from what Im seeing your on a 4.3 rom but the modem did not update. Your modem is still mf9. I would flash a 4.2 rom and go from there. I don't want to give the wrong info hopefully someone can chime in that knows more than me.
Click to expand...
Click to collapse
Yeah that is what I was noticing as well. I have soft bricked my phone twice now trying to use odin and going back to a stock 4.2. The flash says fail everytime. I am wondering if KNOX is blocking ODIN from flashing the new ROM. Thanks for your quick response and I guess this means I am on the right path. Now I just need to find a way to flash a stock 4.2 on my fluster clucked half 4.2 half 4.3 phone.
I do know that once you're on MJA there's no going backwards. Try odining the modem. Make sure you turn your phone off...then boot to DL mode. Don't just boot to DL mode seems to work better that way.
Sent from my SPH-L720 using XDA Premium 4 mobile app
If all fails go here and download the latest MK2 4.3:
http://samsung-updates.com/device/?id=SPH-L720&details=Galaxy_S_4_Sprint
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
bumblingfool said:
Yeah that is what I was noticing as well. I have soft bricked my phone twice now trying to use odin and going back to a stock 4.2. The flash says fail everytime. I am wondering if KNOX is blocking ODIN from flashing the new ROM. Thanks for your quick response and I guess this means I am on the right path. Now I just need to find a way to flash a stock 4.2 on my fluster clucked half 4.2 half 4.3 phone.
Click to expand...
Click to collapse
I would suggest first trying to reinstall your mf9 modem via odin , if that doesn't work I'd try to install the mja modem via odin. You can find the links to files here http://forum.xda-developers.com/showpost.php?p=42954149&postcount=2
And a thread about a similar issue so you can get a better idea of what you need to do.
http://forums.androidcentral.com/sp.../342205-mk2-ota-update-today-killed-wifi.html
Sent from my Nexus 7 using XDA Premium 4 mobile app
Hi, guys
I want to flash danvdh google edition 4.4.2 ROM on my ATT g4 (MF3) with safe strap.
After I create rom-slot1, wipe all the data and install from sd card with the rom zip file I put there already, looks like it start flash, but got "success" in less than 1 min. I flash loki-doki after that (because I was told it's necessary for my phone). Then I reboot, adter safe sreap screen, click continue, black screen with some viabration. nothing happened.
Actually I check the md5 of the rom I download, it's correct. not sure why flash got a "success" in 1 min, suppose should be long.
Anyone can give some suggestion? REally appreciate it.
You need to do more reading. Safestrap only works with touchwiz ROMs, and only other 4.2.2 ROMs since you're on MF3.
Sent from Black<3's I337 running Hyperdrive
DeadlySin9 said:
You need to do more reading. Safestrap only works with touchwiz ROMs, and only other 4.2.2 ROMs since you're on MF3.
Sent from Black<3's I337 running Hyperdrive
Click to expand...
Click to collapse
Thanks for the reply. But I was told I should use safe strap on another my post when I asked how to flash "danvdh google edition 4.4.2 ROM" with MF3.
Do you mean MF3 can not be flashed to kitkat now?
Sorry for those questions, I searched and found a post with same question but no people answer.
Thanks ain advance!
roy316 said:
Thanks for the reply. But I was told I should use safe strap on another my post when I asked how to flash "danvdh google edition 4.4.2 ROM" with MF3.
Do you mean MF3 can not be flashed to kitkat now?
Sorry for those questions, I searched and found a post with same question but no people answer.
Thanks ain advance!
Click to expand...
Click to collapse
As i said, only Touchwiz and other 4.2.2 if you're on MF3. So no kitkat now.
DeadlySin9 said:
As i said, only Touchwiz and other 4.2.2 if you're on MF3. So no kitkat now.
Click to expand...
Click to collapse
Thanks for the reply.
Sad~~
DeadlySin9 said:
As i said, only Touchwiz and other 4.2.2 if you're on MF3. So no kitkat now.
Click to expand...
Click to collapse
Is there any methods now to upgrade AT&TMF3 from 4.2.2 to 4.4?
Thanks!
roy316 said:
Is there any methods now to upgrade AT&TMF3 from 4.2.2 to 4.4?
Thanks!
Click to expand...
Click to collapse
There is the 4.4 leak, but no root of Safestrap for it yet. You'll have to wait for either of those.
roy316 said:
Thanks for the reply. But I was told I should use safe strap on another my post when I asked how to flash "danvdh google edition 4.4.2 ROM" with MF3.
Do you mean MF3 can not be flashed to kitkat now?
Sorry for those questions, I searched and found a post with same question but no people answer.
Thanks ain advance!
Click to expand...
Click to collapse
Im on the same boat, wish I could danvdh on my phone. Im rocking a diff Google Play rom and its pretty solid. Its def a 4.2.2 though but solid on battery none the less
DeadlySin9 said:
There is the 4.4 leak, but no root of Safestrap for it yet. You'll have to wait for either of those.
Click to expand...
Click to collapse
Thanks for the reply.
Keep waiting!
DeadlySin9 said:
There is the 4.4 leak, but no root of Safestrap for it yet. You'll have to wait for either of those.
Click to expand...
Click to collapse
Any news now?
Thanks!!!
roy316 said:
Any news now?
Thanks!!!
Click to expand...
Click to collapse
If you want to flash a 4.4 ROM you could update to 4.3 then root and install safestrap. Safestrap still doesn't work with ROMs that aren't Touchwiz based. If you need the 4.3 MK2 tar, you can download it here http://www.mediafire.com/download/ktkoogwz562p64k/2400258.zip
Sigatorade said:
If you want to flash a 4.4 ROM you could update to 4.3 then root and install safestrap. Safestrap still doesn't work with ROMs that aren't Touchwiz based. If you need the 4.3 MK2 tar, you can download it here http://www.mediafire.com/download/ktkoogwz562p64k/2400258.zip
Click to expand...
Click to collapse
Thank you for the reply.But I am not quite understood.
Do u mean I can do 4.2 -> 4.3 (root and install safestrap) -> 4.4?
I am now on MF3 version (ATT), 4.3 MK2 is work?
roy316 said:
Thank you for the reply.But I am not quite understood.
Do u mean I can do 4.2 -> 4.3 (root and install safestrap) -> 4.4?
I am now on MF3 version (ATT), 4.3 MK2 is work?
Click to expand...
Click to collapse
If you want to flash a 4.4 ROM you could go 4.3,root, install safestrap,4.4 ROM. The compatible 4.4 ROMS are here: http://forum.xda-developers.com/showthread.php?p=51130834
help. I updated my galaxy sph-L720 s4 the official 4.4 kik kat. note that I did not like this version and decided I had to take it back 4.3 mk2. to flash it with odin I get fail. anyone can help me how to return it to the mk2 version. Now I get the cell as 2 small computers, or I will be left in download mode and can not do.
The easy answer is that you cannot go back. It is impossible at this point to downgrade through odin. Once on 4.4.2 you can't go to 4.3. Also 4.3 to 4.2.2.
Sent from my SPH-L720 using Tapatalk
ltindi32 said:
help. I updated my galaxy sph-L720 s4 the official 4.4 kik kat. note that I did not like this version and decided I had to take it back 4.3 mk2. to flash it with odin I get fail. anyone can help me how to return it to the mk2 version. Now I get the cell as 2 small computers, or I will be left in download mode and can not do.
Click to expand...
Click to collapse
Tons of threats talking about how this isn't possible anymore.
Only one wev can go back an forth between are MJA and MK2. Your stuck where you're at now
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Tons of threats talking about how this isn't possible anymore.
Only one wev can go back an forth between are MJA and MK2. Your stuck where you're at now
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
fine. and I can do now since my galaxy is fully lockout in download mode?
ltindi32 said:
fine. and I can do now since my galaxy is fully lockout in download mode?
Click to expand...
Click to collapse
I'm not sure since I'm primarily on my Verizon s4... I'm not aware of a Nae tar file yet for sprint. I'm sure someone else will chime in
Sent from my SCH-I545 using Tapatalk
---------- Post added at 05:35 AM ---------- Previous post was at 05:21 AM ----------
Here... Nae is there for you
http://forum.xda-developers.com/showthread.php?t=2338919
Sent from my SCH-I545 using Tapatalk
My problem now is how I will get my cell and q fail to flash it came to me and now the phone only shows d download mode emergency? as I recover?
ltindi32 said:
My problem now is how I will get my cell and q fail to flash it came to me and now the phone only shows d download mode emergency? as I recover?
Click to expand...
Click to collapse
I'm not sure what you're saying.. Right now your phones borked right??
If so get it into download mode and use that nae tar file if that's the build you were on prior to this setback. Make sense or no?
Sent from my SCH-I545 using Tapatalk
ok. I will explain more clearly. to have my phone already upgraded to 4.4 kik kat, I do not really like this version and I decided to lower it to 4.3 mk2. to try to do that, odin began to fall and then I went in odin fail and then on the phone that I will not start. only when I turn it on I get download mode. now do not know how to get my sph-L720
ltindi32 said:
ok. I will explain more clearly. to have my phone already upgraded to 4.4 kik kat, I do not really like this version and I decided to lower it to 4.3 mk2. to try to do that, odin began to fall and then I went in odin fail and then on the phone that I will not start. only when I turn it on I get download mode. now do not know how to get my sph-L720
Click to expand...
Click to collapse
Ok now I get ya. Unfortunately one you took that 4.4 OTA that's where your phone is now going to stay. You can't downgrade firmwares like we used to. So you're going to have to Odin back 4.4. However once you that you can root it, install a recovery, and then install a stock 4.3 ROM.
That'd be your only way. Your bootloaders stuck on nae now
Verizon S4
Liquid Smooth 4.4
Sprint S4
Negalite 4.4
sorry. I do not understand what I have to do.
ltindi32 said:
sorry. I do not understand what I have to do.
Click to expand...
Click to collapse
You need to go to that link I sent you earlier and flash the nae tar file in Odin.
That will bring your phone back to life
Verizon S4
Liquid Smooth 4.4
Sprint S4
Negalite 4.4
ok. thank you very much. I ask? if you flash a custom rom, then again could return to the rum mk2?
and I just retrieve the phone. I'm on 4.4. Now, as I do to lower it to 4.3 mk2?
ltindi32 said:
ok. thank you very much. I ask? if you flash a custom rom, then again could return to the rum mk2?
Click to expand...
Click to collapse
Yes. Once back on stock 4.4 you can root install custom recovery and THEN flash whatever ROM your heart desires, mk2 if you wanted.
I myself haven't rooted or done anything to an S4 with the nae bootloader like you have, but I'm sure the information is on here for you.
Verizon S4
Liquid Smooth 4.4
Sprint S4
Negalite 4.4
ok. thanks
thanks for all the great info...i wanted to post this in the development forum; however, since im new i need 10 posts to do so
anyway, heres my question: with 4.2.2 there was a hotspot mod for the services.odex and .jar files(mad props to crawrj!!!)....then fgr modded those files to work with 4.3....the difference is in the usb tether. Im using the Cradlepoint MBR1000 router b/c it has USB ports to receive my 3G/4G internet off my Sprint Galaxy S4....i use this combination to supply internet from my phone through the router into my entire home!!!! its been working awesome, but i accidentally accepted the 4.3 upgrade and now the usb tether option under settings/connections/more networks/tethering/usb tethering stopped working with the router ???? i can usb tether to my pc, but when usb tethered to the router, my phone says, "no usb device connected"
i am rooted, have usb debugging checked.....but dont know how to get this up and running again.
granted the naive hotspot technique from qbking77 works great; however, only 2 devices can be wirelessly tethered at any one time - thus the need for the router...and i prefer a usb tether for streaming.
CAN YOU HELP ME? Or at least pass my issue on to someone who can pm me or something....being a nube really sucks..lol..thanks!
Mistertac said:
Yes. Once back on stock 4.4 you can root install custom recovery and THEN flash whatever ROM your heart desires, mk2 if you wanted.
I myself haven't rooted or done anything to an S4 with the nae bootloader like you have, but I'm sure the information is on here for you.
Verizon S4
Liquid Smooth 4.4
Sprint S4
Negalite 4.4
Click to expand...
Click to collapse
Greetings. intale and a custom rom but when I went back to the original rom flshear mk2, I returned to get out fail. I think this fully lockout. what else I can do?
ltindi32 said:
Greetings. intale and a custom rom but when I went back to the original rom flshear mk2, I returned to get out fail. I think this fully lockout. what else I can do?
Click to expand...
Click to collapse
I take It your English isn't the best?
Ok what is it you were trying to do exactly??
Trying to Odin back to mk2?
Verizon S4
Liquid Smooth 4.4
Sprint S4
Negalite 4.4
correct. I'm trying to lose 4.4 to 4.3 mk2 and says fail in odin
ltindi32 said:
correct. I'm trying to lose 4.4 to 4.3 mk2 and says fail in odin
Click to expand...
Click to collapse
Same exact thing the other guy was trying to do a couple posts up lol
Can't be don't
You need to Odin back to 4.4 nae.
There's no going back no downgrading
Verizon S4
Liquid Smooth 4.4
Sprint S4
Negalite 4.4
Can someone help me take my S4 back to 4.3? I got the OTA update for 4.4 yesterday morning and have had nothing but problems. Terrible battery life (40% down in 3 hours with little to no use) WiFi wont turn on thanks to this piece of junk Knox software. So before I dump Samsung completely for a Moto X or Nexus, can someone help me downgrade from 4.4 back to 4.3 where I had no problems?
Were you totally stock before the OTA? If you still have warranty left, I would bring it in to a Sprint store and *****.
If not, you can try one of 2 things. 1) flash the NAE tar file using odin to see if that fixes your issues or 2) flash the MK2 tar file to bring you back to 4.3
aypanthony said:
Were you totally stock before the OTA? If you still have warranty left, I would bring it in to a Sprint store and *****.
If not, you can try one of 2 things. 1) flash the NAE tar file using odin to see if that fixes your issues or 2) flash the MK2 tar file to bring you back to 4.3
Click to expand...
Click to collapse
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
sponge14 said:
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
Click to expand...
Click to collapse
You're correct with not being able to go back to mk2 4.3 via Odin.
Sent from my SPH-L720 using Tapatalk
sponge14 said:
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
Click to expand...
Click to collapse
Yeah, I think you are right. Can't go back to 4.3 once you have the 4.4 bootloader, my bad. I wonder if you should do a factory reset to see if that clears up your issues.
daniel4653 said:
You're correct with not being able to go back to mk2 4.3 via Odin.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Is there some other way of downgrading? What about going back to Cyanogen's full release?
Well that sucks that you can't go back to 4.3
I had the same issues when I updated and was kinda pissed at it to but a factory reset and it been running way better ever since and I'm rooted with xposed installed and no complaints
Sent from my SPH-L720 using xda app-developers app
sponge14 said:
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
Click to expand...
Click to collapse
I believe once KNOX Bootloader has been installed, your stuck with it. No going back.
But honestly, if you root 4.4, your gonna void KNOX.
lawmangrant said:
I believe once KNOX Bootloader has been installed, your stuck with it. No going back.
But honestly, if you root 4.4, your gonna void KNOX.
Click to expand...
Click to collapse
I don't want Knox on my phone at all, it's garbage for me. Are you saying I can't even go Cyanogen at this point?
sponge14 said:
I don't want Knox on my phone at all, it's garbage for me. Are you saying I can't even go Cyanogen at this point?
Click to expand...
Click to collapse
You can still have all that. KNOX is just the warrantly flag I have KNOX on mine, but I still have rooted and flashed other roms.
lawmangrant said:
You can still have all that. KNOX is just the warrantly flag I have KNOX on mine, but I still have rooted and flashed other roms.
Click to expand...
Click to collapse
Ah OK, I don't care about the warranty, it's out in April anyways... Looks like I need to try Cyanogen again, hopefully it's better this time.
i have gone back to 4.3 with odin.....use odin 1.85.....*First flash the mk2 modem or it will fail**.....why? i dont know...
so here is what i do....1) Odin first the mk2 modem...2) Odin stock Mk2 rom...3) Odin philz latest recovery...4) boot into recovery..goto philz settings and tap " re-root....5) reboot and enjoy.....
Sent from my SPH-L720 using xda app-developers app
chris-allen said:
i have gone back to 4.3 with odin.....use odin 1.85.....*First flash the mk2 modem or it will fail**.....why? i dont know...
so here is what i do....1) Odin first the mk2 modem...2) Odin stock Mk2 rom...3) Odin philz latest recovery...4) boot into recovery..goto philz settings and tap " re-root....5) reboot and enjoy.....
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
You're saying your bootloader went back to MK2 after this? Didn't think that was possible. I've had nothing but stupid little issues myself after using Odin to flash the phone to NAE. I've done factory resets... Completely wiped the phone in Philz. Tried KToonsez kernel as well and stock NAE just sux! I'll probably just flash Liquid Smooth back on it, was only trying to stick with stock NAE for stability and camera , that phone is my girls and she doesn't have the patience for all the bugs that come with custom Roms lol
Anyways just want to confirm that with you. Thanks
Sent from my SCH-I545 using Tapatalk
chris-allen said:
i have gone back to 4.3 with odin.....use odin 1.85.....*First flash the mk2 modem or it will fail**.....why? i dont know...
so here is what i do....1) Odin first the mk2 modem...2) Odin stock Mk2 rom...3) Odin philz latest recovery...4) boot into recovery..goto philz settings and tap " re-root....5) reboot and enjoy.....
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I don't know if that is possible for those of us rocking triband. Obviously we cannot use the Mk2 modem or rom. In any event, I upgraded to 4.4.2 on my new L720T and regretted it, but now I'v" managed to install twrp and rooted it and the rom settled down after a few days. At first, horrible battery use but now its amazing. My battery reads 75 percent after 14 hours and that's quite good enough. The only issue I still face is the SD card thing, but that only seems to apply third party software as I can move files directly from internal to external memory using the stock files app that comes with android.
i dont know about triband. i dont have one and im not going to pretend im a smart dev because thats also not true.. i HAVE ODIN 4.4.2 THEN turned around and ODIN 4.3 due to something i didnt like...im not sure if it changes the bootloader or not, i dont even check. i have only tried this with mk2 to nae.. when i purchesed my device it came with mk2 so i have never tinkerd with the other bootloaders. if you have something other then mk2 id ask a dev befor doing anything. like i said it works for me as long as i flash the modem FIRST that corrisponds to the build. ( mk2 or nae )...and in some cases if the wifi is borked on nae, iv had to flash the modem again after instalation of the rom.. i cant explain why any of this happens....
Sent from my SPH-L720 using xda app-developers app
chris-allen said:
i dont know about triband. i dont have one and im not going to pretend im a smart dev because thats also not true.. i HAVE ODIN 4.4.2 THEN turned around and ODIN 4.3 due to something i didnt like...im not sure if it changes the bootloader or not, i dont even check. i have only tried this with mk2 to nae.. when i purchesed my device it came with mk2 so i have never tinkerd with the other bootloaders. if you have something other then mk2 id ask a dev befor doing anything. like i said it works for me as long as i flash the modem FIRST that corrisponds to the build. ( mk2 or nae )...and in some cases if the wifi is borked on nae, iv had to flash the modem again after instalation of the rom.. i cant explain why any of this happens....
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Lol I know what you mean... Sometimes things just seem to work or they don't.
But that's interesting you can go back to mk2 after being on nae. I figured that was not possible. But if you didn't get any fails in Odin while downgrading that's great. Maybe I'll get ballsy and try this later.
Sent from my SCH-I545 using Tapatalk
Is there a stock 4.4 Rom out there I can try, preferably one without Knox? Sprint has recommended that I unroot, that they have a tech bulletin where rooted phones have wifi, and other issues.
sponge14 said:
Is there a stock 4.4 Rom out there I can try, preferably one without Knox? Sprint has recommended that I unroot, that they have a tech bulletin where rooted phones have wifi, and other issues.
Click to expand...
Click to collapse
You have a link to that bulletin??
Sent from my SCH-I545 using Tapatalk
Mistertac said:
You have a link to that bulletin??
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
No that's just what the escalated Tech Support person from Oklahoma City told me.
I also just wiped the cache and did a factory reset and still have the same wifi problem...