Database Users

TWRP For E7

Hey friends,
Just flashed / installed TWRP v 2.7.0.0.
Works like charm except Terminal Emulator & SD Card do not work.
Here is the link for downloading ...
http://d-h.st/v4t
Instructions to flash:
(Make sure you are rooted prior to this.)
1. Install Recovery Tools from above link.
2. You will get a prompt to backup your stock recovery. DO IT.
3. Download recovery file from here and copy it to your phone.
4.Select 'Flash Recovery' option.
5. Select 'from storage' and select it from your phone.
6. flash it.
You're done
XDA LINK:http://forum.xda-developers.com/showthread.php?p=53126756

gandhinp said:
Hey friends,
Just flashed / installed TWRP v 2.7.0.0.
Works like charm except Terminal Emulator & SD Card do not work.
Here is the link for downloading ...
http://d-h.st/v4t
Instructions to flash:
(Make sure you are rooted prior to this.)
1. Install Recovery Tools from above link.
2. You will get a prompt to backup your stock recovery. DO IT.
3. Download recovery file from here and copy it to your phone.
4.Select 'Flash Recovery' option.
5. Select 'from storage' and select it from your phone.
6. flash it.
You're done
XDA LINK:http://forum.xda-developers.com/showthread.php?p=53126756
Click to expand...
Click to collapse
please provide credits to the author with the link...

Thanks To Mohammad Azad Islam
GTARaja said:
please provide credits to the author with the link...
Click to expand...
Click to collapse
Thanks To
Ravikirancg & Mohammad Azad Islam .
For above information regarding TWRP & Installation.

gandhinp said:
Thanks To
Ravikirancg & Mohammad Azad Islam .
For above information regarding TWRP & Installation.
Click to expand...
Click to collapse
Who's Mohammed Azad Islam?
And what's the point of this thread? You just copy paste whatever I included in the original thread. This is not even a question.
Sent from my E7

Rooting Xolo Q700S after beta 4.4.2 update

So the brilliant gentlemen at xolo have graciously provided us with a spectacular (albeit slightly buggy) update to android 4.4.2 kitkat for our xolo Q700S.
While this has a lot of advantages it lacks a clean and simple rooting method like framaroot or towelroot.
However, there is a slightly complex rooting method available to root our Q700S.
Our brothers with the Q1010i rooted their 4.4.2 devices with a method mentioned here
I just used the method given there and adapted it for our device. If any credit need be given they are owed to the original devs for porting and testing.
So lets get rooting!
1) Download Smartphone drivers for MTK devices from link given here ,unzip and.
- click install.bat
- if that doesn't work : run device management (run> devmgmt.msc). Turn off phone and plug in. Find MT65xx preloader. Update drivers. Browse local harddrive for drivers. Navigate to folder where you unzipped the drivers /SmartPhoneDriver/x86 or x64/infs. That should install drivers.
2) Download SP flashtool for windows from link given here.
3) Download CTR recovery for Q700s ported by tarun from this link
-best if you rename it to recovery.img
4)Download Scatter File for our device. (if it throws an error download scatter file from the attachments)
5) Download SuperSU by chainfire.
- rename to update.zip
- copy to root of sdcard.
Now ensure that you have a proper usb cable, wits, a strong nerve and basic knowledge of how to unbrick a phone if something goes wrong.
All boxes checked? Lets proceed.
>Run SP Flashtool
>Click Scatter-loading
>Select the .txt scatter file
>in the now visible options check only RECOVERY and double click the long empty green bar in the same row. Load recovery.img
>click DOWNLOAD on the top
>turn off phone and connect to PC.
>wait for bar on the bottom to go from red to yellow and then pop-up with download OK.
>now press vol+ and power and boot to recovery
>install.zip from sdcard
>let SuperSu install.
>reboot device (if it shows warning that may lose root access press no)
let android boot up!
if you did everything right then you have a rooted android 4.4.2 xolo q700S on your hands.
have fun!

usb noot stable
Hey .. thanks sir for this
bt flash tool doesnt recognizing my phone ,
it connects only when i press both the volume up and down key.
iS there any other way to install recovery? or by manually from stock recovery ?
or how to solve this prob ???
Sry for bad english
Thanks in advance..

Looking for kernel patch
It is indeed a great post and that'll gonna be helping people but I have a issue with Kernel or to say the root of this device, I have been using link2SD with JB with my sd card having a ext2 format but since I have moved to KK, it seem to have bugging me out all the way,
I can mount my sd card with ext4 but its useless and doesnt let me move my apps to 2nd partion as internal, eventhough I can use ext3 format which ends up with an error at mounting with unsupported transport end point, the reason made me to look for a kernel patch, I believe you'll try this and will be able to resolve for following readers and well thank you for this one.
Looking for a kernel that adds ext2 support.

Use Latest version of link2sd
adarshsamal said:
It is indeed a great post and that'll gonna be helping people but I have a issue with Kernel or to say the root of this device, I have been using link2SD with JB with my sd card having a ext2 format but since I have moved to KK, it seem to have bugging me out all the way,
I can mount my sd card with ext4 but its useless and doesnt let me move my apps to 2nd partion as internal, eventhough I can use ext3 format which ends up with an error at mounting with unsupported transport end point, the reason made me to look for a kernel patch, I believe you'll try this and will be able to resolve for following readers and well thank you for this one.
Looking for a kernel that adds ext2 support.
Click to expand...
Click to collapse
Use the latest version of link2sd, your problem will be solved if you have proper superuser rights ..

help
beingAshar said:
So the brilliant gentlemen at xolo have graciously provided us with a spectacular (albeit slightly buggy) update to android 4.4.2 kitkat for our xolo Q700S.
While this has a lot of advantages it lacks a clean and simple rooting method like framaroot or towelroot.
However, there is a slightly complex rooting method available to root our Q700S.
Our brothers with the Q1010i rooted their 4.4.2 devices with a method mentioned here
I just used the method given there and adapted it for our device. If any credit need be given they are owed to the original devs for porting and testing.
So lets get rooting!
1) Download Smartphone drivers for MTK devices from link given here ,unzip and.
- click install.bat
- if that doesn't work : run device management (run> devmgmt.msc). Turn off phone and plug in. Find MT65xx preloader. Update drivers. Browse local harddrive for drivers. Navigate to folder where you unzipped the drivers /SmartPhoneDriver/x86 or x64/infs. That should install drivers.
2) Download SP flashtool for windows from link given here.
3) Download CTR recovery for Q700s ported by tarun from this link
-best if you rename it to recovery.img
4)Download Scatter File for our device.
5) Download SuperSU by chainfire.
- rename to update.zip
- copy to root of sdcard.
Now ensure that you have a proper usb cable, wits, a strong nerve and basic knowledge of how to unbrick a phone if something goes wrong.
All boxes checked? Lets proceed.
>Run SP Flashtool
>Click Scatter-loading
>Select the .txt scatter file
>in the now visible options check only RECOVERY and double click the long empty green bar in the same row. Load recovery.img
>click DOWNLOAD on the top
>turn off phone and connect to PC.
>wait for bar on the bottom to go from red to yellow and then pop-up with download OK.
>now press vol+ and power and boot to recovery
>install.zip from sdcard
>let SuperSu install.
>reboot device (if it shows warning that may lose root access press no)
let android boot up!
if you did everything right then you have a rooted android 4.4.2 xolo q700S on your hands.
have fun!
Click to expand...
Click to collapse
SP tool shows Error intailizing scatter file failed. please check the name of scatter file load is legal

Elvis8655 said:
SP tool shows Error intailizing scatter file failed. please check the name of scatter file load is legal
Click to expand...
Click to collapse
i have uploaded the scatter file in attachments. download that without renaming.

beingAshar said:
So the brilliant gentlemen at xolo have graciously provided us with a spectacular (albeit slightly buggy) update to android 4.4.2 kitkat for our xolo Q700S.
While this has a lot of advantages it lacks a clean and simple rooting method like framaroot or towelroot.
However, there is a slightly complex rooting method available to root our Q700S.
Our brothers with the Q1010i rooted their 4.4.2 devices with a method mentioned here
I just used the method given there and adapted it for our device. If any credit need be given they are owed to the original devs for porting and testing.
So lets get rooting!
1) Download Smartphone drivers for MTK devices from link given here ,unzip and.
- click install.bat
- if that doesn't work : run device management (run> devmgmt.msc). Turn off phone and plug in. Find MT65xx preloader. Update drivers. Browse local harddrive for drivers. Navigate to folder where you unzipped the drivers /SmartPhoneDriver/x86 or x64/infs. That should install drivers.
2) Download SP flashtool for windows from link given here.
3) Download CTR recovery for Q700s ported by tarun from this link
-best if you rename it to recovery.img
4)Download Scatter File for our device. (if it throws an error download scatter file from the attachments)
5) Download SuperSU by chainfire.
- rename to update.zip
- copy to root of sdcard.
Now ensure that you have a proper usb cable, wits, a strong nerve and basic knowledge of how to unbrick a phone if something goes wrong.
All boxes checked? Lets proceed.
>Run SP Flashtool
>Click Scatter-loading
>Select the .txt scatter file
>in the now visible options check only RECOVERY and double click the long empty green bar in the same row. Load recovery.img
>click DOWNLOAD on the top
>turn off phone and connect to PC.
>wait for bar on the bottom to go from red to yellow and then pop-up with download OK.
>now press vol+ and power and boot to recovery
>install.zip from sdcard
>let SuperSu install.
>reboot device (if it shows warning that may lose root access press no)
let android boot up!
if you did everything right then you have a rooted android 4.4.2 xolo q700S on your hands.
have fun!
Click to expand...
Click to collapse
hi friend
i tried to but i have installed recovery img but supersu is not getting its so error while installing recovery mode pls help

Try Aparted from Google Play
adarshsamal said:
It is indeed a great post and that'll gonna be helping people but I have a issue with Kernel or to say the root of this device, I have been using link2SD with JB with my sd card having a ext2 format but since I have moved to KK, it seem to have bugging me out all the way,
I can mount my sd card with ext4 but its useless and doesnt let me move my apps to 2nd partion as internal, eventhough I can use ext3 format which ends up with an error at mounting with unsupported transport end point, the reason made me to look for a kernel patch, I believe you'll try this and will be able to resolve for following readers and well thank you for this one.
Looking for a kernel that adds ext2 support.
Click to expand...
Click to collapse
Please try Aparted and make both partition as FAT32 & Primary than install Link2SD as a fresh app and it will ask to choose second partition type than select option FAT16/FAT32, It will ask for reboot it will work after that.

Simple way to flash Kitkat & root it (no need to flash stock recovery, use cwm):
1.Download 392.8 mb update.zip (here: http://d-h.st/MfB)
2.Unzip it, goto META-INF/com/google/android and replace the 'updater-script' with the one attached.
3. Now zip it back, and flash it with cwm, carliv etc...
4.To root it, download & flash SuperSu via cwm (here: http://goo.gl/OSKQRQ)

I m having official final Kitkat update in q700s... and official stock recovery... Not able to root... I want to use viper4android... Give a clear direction plz to root it

xolo q700s kitkat root
i tried to root but when i switch my phone of and then nothing happens please help me and ya there is no red to green bar at bottom and i can't see download ok pop up man pls help while i boot it into recovery and try to apply update.zip after it fills one fourth of bar in my phone it says installation aborted #pls #help!!

what is the risk of rooting?

Root xolo q700s plus
can anyone say me how can i root my xolo q700s plus ?????? :laugh:

Followed all the steps, but supersu says su binary needs to be upated. PLease suggest what to do.

unable to download smartphone drivers for mtk drivers

ZTE Blade L2 Kitkat Firmware

Android Kitkat based ROM for the ZTE Blade L2
SwitchBL2de
ROM Features:
PreRooted
Apex Launcher
Debloated
Micro SD switched with Phone Storage
Zipalligned
ZRAM
build.prop Tweaks for the following :
Video and Photo Quality
Internet Connection Speed/Quality
Network Performance
Download Link:
Removed - Recompiling Rom, My sincerest apologies to DeviRSilva.
I used an earlier version of his kernel for the build - http://forum.xda-developers.com/android/development/kernel-devir-blade-l216-11-2014-t2945103
MD5 : a719cb770585f24c891fe47da9e56245
Note - Updated hosts file for ad blocking (Use xposed module "hosts Enabler" to prevent adverts)
Once Rom is installed and you restart phone from recovery
It may give the following warning "Root access possibly lost. Fix? THIS CAN NOT BE UNDONE"
Select "Yes - Fix root (/system/xbin/su)"
Credits to BSDgeek_Jake for the hosts file (http://forum.xda-developers.com/showthread.php?t=1916098)
*****************************************************************************************************************************************
Custom Recovery
Please have a read through the information in this link : http://www.howtogeek.com/193055/what-is-a-custom-recovery-on-android-and-why-would-i-want-one/
Flashing a custom recovery on the L2 is a simple process.
Things Required for this process:
Rooted Phone - (Please see the post on Rooting)
Mobile Uncle Tools APK
Recovery Image
First you have to allow the phone to install apps that dont come from Google Play Store.To do so,follow the guide :
1.Settings Menu
2.Security
3.Enable(tick) Unknown sources
4.Untick Verify apps
You can always reset these back to how you found them when you are done.
Download Mobile Uncle Tools
Mega Link: http://goo.gl/IkyVDo
or
MediaFire Link : http://goo.gl/c5q6Jh
Copy APK file to your SD card,use your file manager to install it.
Run Mobile uncle tools,allow root permissions when menu pops up.
You can close the app for now.Next thing we need is the actual recovery file itself.I've attached the recovery i find works best
Carliv Touch Recovery v2.2 - MTK CWM-based v 6.0.4.4
Download Recovery.img file
Mega Link: http://goo.gl/1f8OwX
or
MediaFire Link :http://goo.gl/U1D2Zu
MD5 :9f770b95df8e1beabd7417fc112190bc
Once the file has downloaded,copy to the root of your SD Card.
Open Mobile Uncle Tools and Select "Recovery Update".
Be sure to Select the downloaded recovery image,not anything else.
Select the file and proceed with installation.Mobile uncle tools will then prompt you to reboot into recovery if the update was successful.Select Yes and the phone will reboot into the new recovery menu
Credits to :
eddy.rugal - Base Rom
Carliv - For Recovery
njava - For Mobileuncle MTK Tool

Update
Resize Apps Partition
WARNING! This can BRICK your phone if done incorrectly.
PLEASE FOLLOW ALL STEPS CORRECTLY.
Please make a backup of all your important stuff.
Make a backup in the recovery.Make 100% sure the backup completes without any errors
Reboot into recovery mode (Hold the Up button and press power button to turn device on)
1.Select Backup and Restore
2.Select Backup and Confirm(Proceed)
Once the backup is complete,the backup is located in "clockworkmod" folder on SD Card
You have to factory reset device,so be prepared to reinstall apps/games (You are going to lose data)
If you are fine with all of the above,The following mod increases the App Partition size from 1GB to 2GB.It rewrites the Internal Storage to 513MB(Used for videos/pictures,which is fine since we use our Micro SD cards for that)
If you are happy with all of the above,you can proceed with the next step :
Firstly,Download all files required and copy to SD Card
2 GB for apps_Jellybean_4.zip (232.63 KB)
Mega Link - http://goo.gl/ao3NFO
or
Media Fire Link - http://goo.gl/3j9RWm
AND
MTK_Nvram_Tool.zip (2.9MB)
Mega Link - http://goo.gl/Z2Chpx
or
Media Fire Link - http://goo.gl/sjah8X
Once on SD Card,reboot into recovery mode (Hold the Up button and press power button to turn device on)
1.Select "Install Zip"
2.Select "Choose zip Sdcard"
3.Choose "MTK_Nvram_Tool.zip"
4.Select "Yes - Install MTK_Nvram_Tool.zip"
5.Click Next
6.Select "I Agree with this Terms and Conditions" and click Next
7.Click Next again
9.Choose 'Nvram Backup"
Once its done it should say "Backup Completed"
Under that it should say "Nvram Backup Successfully Completed"
It give the location for that backup,always keep that file (Copy to the PC Later)
10.Click OK
11.Click Exit
12.Click Yes
Now you are back at the install update from zip file screen.
13.Select "Install Zip"
14.Select "Choose zip Sdcard"
15.Choose "2 GB for apps_Jellybean_4.zip"
16.Select "Yes - Install 2 GB for apps_Jellybean_4.zip"
17.Go back to main menu
18.Choose Wipe menu
19.Choose Wipe Data (Factory Reset) -THIS WILL ERASE YOUR DATA
20.Wipe Cache
21.Wipe Dalvik Cache
22.Go back to main menu and reboot phone
The phone should reboot.If you get a message saying you have to format phone storage,click yes to format.
Go to Settings,Storage and See Total space is now 1.97GB
If the phone wont boot,power down,then hold up key and turn on to get into recovery mode.
1.Select Backup and Restore
2.Select Restore and Confirm(Proceed)
Restore the backup you made earlier.
This should let the system load when you reboot again,even if it asks you to format the phone again.
Copy NVRAM Backup to PC for safe keeping.
If you want to return to original/stock
Follow the same procedure as above but use the following file instead of the 2GB File
Stock Partition_Jellybean_4.zip (232.63KB)
Mega Link - http://goo.gl/pMn0ea
or
Media Fire - http://goo.gl/KJfRF7
Credits to :
AnoopKumar - MTK Nvram Tool

Andalitez said:
Hi Guys
Just an update.I downloaded the update from the website again,used winRAR and replaced the modem file in the system.
Everything works great now
Click to expand...
Click to collapse
Hey man can u yplease hook me up with the modem file im kida stuck with unkown baseband too

Replied
BlaqueDroid said:
Hey man can u yplease hook me up with the modem file im kida stuck with unkown baseband too
Click to expand...
Click to collapse
Hey man.
Sent you a PM.Currently working on a rom,will only be able to upload it for you in afew hours

ZTE
ztedevices.com/search.html?keyword=blade l2 look on there for the firmware for your device , push via adb sideloading and you should be set

noob problem...
guys, can you please help me...I also have the same problem when I flashed the kitkat rom...my blade l2 now can't read my simcard...what should I do?...

No Sim Detected
eochi18jhae said:
guys, can you please help me...I also have the same problem when I flashed the kitkat rom...my blade l2 now can't read my simcard...what should I do?...
Click to expand...
Click to collapse
Okay,you have to download the firmware version for your country,and have custom recovery installed on the phone.
So if you in UK,download the rom for your phone from UK provider.(doesnt matter if its JB or KK)
http://www.ztedevices.com/support/index.html
Once you have the rom,Use winRAR to do the following:
1.open the rom from your country in winrar so you can see the contents.
2.Open system folder (dont extract,just navigate into the folders in winrar)
3.Open "etc" folder
4.Open Firmware folder
5.Select "modem_1_wg_n.img" and extract it(i just drag and drop on desktop)
6.Open the Kitkat firmware you've downloaded using winRAR
7.Open System folder
8.Open "etc" folder
9.Open Firmware folder
10. Copy the "modem_1_wg_n.img" into that location(drag and drop from desktop)
11.winRAR asks if you want to :Add/Replace file/s? Select Yes or OK to allow it to
12.copy entire firmware to phone and reflash it on the phone from the SD card
I dont know if you can just replace the modem file after having loaded the firmware.I didnt try or test it.it may or may not work.
I am working on Custom Firmware for this phone though.
latest achievement was i managed to get the phone to see the SD card as phone storage thanks to various xda guides.this will be built in
FIrmware should be ready in a few days after testing.if anybody is interested in trying it out,let me know

problem solved...
Thank you sir...problem solved...it's really hard to be a noob...have to understand a lot of things now....I'm willing to try your firmware on my phone...upload it when done...keep up the good work...sorry for my english...

Post has been updated

I need to talk to you.... Go read my PM

installation is always aborted.. PLEASE HELP

Replied

Thanks
The thread is so useful... Keep up the good work, I don't have patience to try the new ROM!
Is there any chance for kernel supporting overclocking and undervoltage, also with more Gvernor and I/O Sheduler options?
Also Would be gorgeous if there's tap screen to wake option, this would need custom kernel too...
I'm now using DeviRSilva's kernel, which is doing great! Man, don't be afraid to relese it and continue tweaks
Still I'm a noob and maybe half of theese wishes are impossible, but would be so cool if they're possible to develop!
PD: I saw a site promoting Lollipop ROM for our L2 is that real?
PD2: Sorry for my awful English and probably stupid requests and questions...

helpppp
I have probelm, phone do not show sim card, on official site there is no serbia rom please how to fix it?

Andalitez said:
Replied
Click to expand...
Click to collapse
It fails to flash the ROM with the updated radio file. Just stops at Can't open... file.zip '(bad)'. Installation aborted.
How to fix?

Hi how do i unroot the zte blade l2?
And how to I remove costum recovery and reinstall stock recovery and stock rom?
Thanks just asking in case of sending it back for repairing.
Just noticed that the download link has been remoded.
Can someone provide a link for this rom?
Thanks.

Does this ROM have Greek language installed ???

no links are working
I need a copy of carliv recovery and backup of stock recovery as u think although my mobile mainly working I think the recovery is corrupt and has screwed my sound thanks in advance as I am taking a giant leap and biting bullet to try this recovery hope it can flash the legit kit kat if ever released by zte or virgin UK thanks
Andalitez said:
Android Kitkat based ROM for the ZTE Blade L2
SwitchBL2de
ROM Features:
PreRooted
Apex Launcher
Debloated
Micro SD switched with Phone Storage
Zipalligned
ZRAM
build.prop Tweaks for the following :
Video and Photo Quality
Internet Connection Speed/Quality
Network Performance
Download Link:
Removed - Recompiling Rom, My sincerest apologies to DeviRSilva.
I used an earlier version of his kernel for the build - http://forum.xda-developers.com/android/development/kernel-devir-blade-l216-11-2014-t2945103
MD5 : a719cb770585f24c891fe47da9e56245
Note - Updated hosts file for ad blocking (Use xposed module "hosts Enabler" to prevent adverts)
Once Rom is installed and you restart phone from recovery
It may give the following warning "Root access possibly lost. Fix? THIS CAN NOT BE UNDONE"
Select "Yes - Fix root (/system/xbin/su)"
Credits to BSDgeek_Jake for the hosts file (http://forum.xda-developers.com/showthread.php?t=1916098)
*****************************************************************************************************************************************
Custom Recovery
Please have a read through the information in this link : http://www.howtogeek.com/193055/what-is-a-custom-recovery-on-android-and-why-would-i-want-one/
Flashing a custom recovery on the L2 is a simple process.
Things Required for this process:
Rooted Phone - (Please see the post on Rooting)
Mobile Uncle Tools APK
Recovery Image
First you have to allow the phone to install apps that dont come from Google Play Store.To do so,follow the guide :
1.Settings Menu
2.Security
3.Enable(tick) Unknown sources
4.Untick Verify apps
You can always reset these back to how you found them when you are done.
Download Mobile Uncle Tools
Mega Link: http://goo.gl/IkyVDo
or
MediaFire Link : http://goo.gl/c5q6Jh
Copy APK file to your SD card,use your file manager to install it.
Run Mobile uncle tools,allow root permissions when menu pops up.
You can close the app for now.Next thing we need is the actual recovery file itself.I've attached the recovery i find works best
Carliv Touch Recovery v2.2 - MTK CWM-based v 6.0.4.4
Download Recovery.img file
Mega Link: http://goo.gl/1f8OwX
or
MediaFire Link :http://goo.gl/U1D2Zu
MD5 :9f770b95df8e1beabd7417fc112190bc
Once the file has downloaded,copy to the root of your SD Card.
Open Mobile Uncle Tools and Select "Recovery Update".
Be sure to Select the downloaded recovery image,not anything else.
Select the file and proceed with installation.Mobile uncle tools will then prompt you to reboot into recovery if the update was successful.Select Yes and the phone will reboot into the new recovery menu
Credits to :
eddy.rugal - Base Rom
Carliv - For Recovery
njava - For Mobileuncle MTK Tool
Click to expand...
Click to collapse

any news on the kitkat rom yet? super excited to try this out!

is the link for the rom gone?
i dont see it

Trouble in recovery mode

Hi.
I'm trying to flash MIUI custom ROM in my old canvas 2 colours a120. It is not rooted. I hav the .zip files for rooting & flashing. But i just can't find the location of them in recovery mode. The 'apply update from sdcard' shows the following folders:
 @btmtk/
agps_spl/
amit/
anr/
app-asec/
app-lib/
app-private/
app/
backup/
dalvik-cache/
dota/
dontpanic/
drm/
local/
logs/
lost+found/
mdl/
media/
misc/
nfc_socket/
nvram/
property/
resource-cache/
Please help me find my .zip file :crying:

try this
Shabazsap said:
Hi.
I'm trying to flash MIUI custom ROM in my old canvas 2 colours a120. It is not rooted. I hav the .zip files for rooting & flashing. But i just can't find the location of them in recovery mode. The 'apply update from sdcard' shows the following folders:
@btmtk/
agps_spl/
amit/
anr/
app-asec/
app-lib/
app-private/
app/
backup/
dalvik-cache/
dota/
dontpanic/
drm/
local/
logs/
lost+found/
mdl/
media/
misc/
nfc_socket/
nvram/
property/
resource-cache/
Please help me find my .zip file :crying:
Click to expand...
Click to collapse
open your browser settings and try to find it from there or connect your phone to your pc and search by that file name

Download OTA rooting apps like Kingroot or Framaroot and root your device. Then download Flashify/Rashr or mobile uncle tools(not available on Play store) and flash custom recovery.

[Otus][Stock][5.1]TWRP Backup of Stock ROM[XT1506]

TWRP Backup file for MOTO E2 XT1506
TWRP Recovery version [WORKING]- 3.0.2
Note :
- Not responsible for any issues during restoring
Instructions To Restore :
- First download the Otus 5.1 TWRP Backup
- Thanx to @jyothi017 For 5.0 backup file..... You can download it from here Backup of 5.0 for otus
- Then extract the zip file to the Root directory of your SDCard or Internal Storage
- Boot into recovery
- Then Click on Restore Section
- Select Storage (Where you extracted the zip file)
- Then Reboot
- After boot when you come on main screen (i.e. After passing setup wizard)
- There will be a Notification in your notification panel showing uninstall sensor firmware
- Click on that
- Then click uninstall, it automatically reboots,no worries and then the sound works.
- That's it complete restoring is done.
I Hope this thread will be useful to u all who are searching for backup file for their OTUS
Hit Thanks.... and enjoy

shaktiman01 said:
TWRP Backup file for MOTO E2 XT1506
TWRP Recovery version [WORKING]- 3.0.2
Note :
- Not responsible for any issues during restoring
Instructions To Restore :
- First download the Otus 5.1 TWRP Backup
- Thanx to @jyothi017 For 5.0 backup file..... You can download it from here Backup of 5.0 for otus
- Then extract the zip file to the Root directory of your SDCard or Internal Storage
- Boot into recovery
- Then Click on Restore Section
- Select Storage (Where you extracted the zip file)
- Then Reboot
- After boot when you come on main screen (i.e. After passing setup wizard)
- There will be a Notification in your notification panel showing uninstall sensor firmware
- Click on that
- Then click uninstall, it automatically reboots,no worries and then the sound works.
- That's it complete restoring is done.
I Hope this thread will be useful to u all who are searching for backup file for their OTUS
Hit Thanks.... and enjoy
Click to expand...
Click to collapse
I tried flashing lineage 14.1 but failed. Was stupid enough to not make a backup. This was my first root. Downloaded the framework and flashed it. Works but still no sim card detected .radio off. WiFi and hotspot works. What were my mistakes ??.I don't remember the errors in twrp process... I'm using twrp 2.8.6 as suggested for my device moto e2015 otus XT1506. Any suggestions mockings are accepted .I'm here to learn