Let talk about some background information.
I'm using a f320s ,4.4.2 stock version. installed CWM
Download mode works , CWM works.
http://forum.xda-developers.com/showthread.php?t=2548974
After installing this mod to my phone with a wrong way, the phone can't boot up in normal way. I tried using the "kdz" way and "tot" way but this is not work. pc can't detect my usb when using kdz way. pc can't load when using the tot way, it used to work when repluging in the usb.
Please help!!!
I think you do wrong procedure, if you flash kdz and tot, your phone must set to download mode and yours pc will conected and got com conection. Please check your driver frist. What you see in your pc device manager ?
Give more information will saving a lot of time to know your exactly problem.
Do more seach how to flash back to stock rom, tot and kdz.
Related
Hi guys, can anyone help me with this, I recently acquired a lg e400 and rooted it, was going to flash cyanogenmod for it but i messed up and flashed a different baseband for a different model phone first(i know it was stupid, now i have a semi-hard brick and the only mode i can get into is a black screen, computer sees the phone as lge androidnet usb, i enter this by holding the vol down and power as i plug into the computer. I've tried every other key combo but cannot get into any other mode....i've tried using the lg flash tool with no success, tried uptest with no result, tried the lg mobile support tool and it picks up my phone as the correct phone lge400r with a software version of v20e which used to be a v10b....how can i flash just the correct baseband?....i also tried kdz and when i try and flash the original kdz file it starts but fails with wparam:100 lparam:1002, i'm thinking maybe i have the incorrect firmware kdz....could anyone point me in the right direction with this?....it's driving me nuts
dantheman1977 said:
Hi guys, can anyone help me with this, I recently acquired a lg e400 and rooted it, was going to flash cyanogenmod for it but i messed up and flashed a different baseband for a different model phone first(i know it was stupid, now i have a semi-hard brick and the only mode i can get into is a black screen, computer sees the phone as lge androidnet usb, i enter this by holding the vol down and power as i plug into the computer. I've tried every other key combo but cannot get into any other mode....i've tried using the lg flash tool with no success, tried uptest with no result, tried the lg mobile support tool and it picks up my phone as the correct phone lge400r with a software version of v20e which used to be a v10b....how can i flash just the correct baseband?....i also tried kdz and when i try and flash the original kdz file it starts but fails with wparam:100 lparam:1002, i'm thinking maybe i have the incorrect firmware kdz....could anyone point me in the right direction with this?....it's driving me nuts
Click to expand...
Click to collapse
I think that you should use this site LINK. There you have all of the firmwares for L3, and you can choose baseband
Daniolki said:
I think that you should use this site LINK. There you have all of the firmwares for L3, and you can choose baseband
Click to expand...
Click to collapse
yes, i tried that, but the only mode i can enter is download mode.....kdz updater fails, is there a way to flash in download mode?
1. Download THIS, your firmware as .kdz file and LG PC Suite
2. Install msxml.msi, and LG PC Suite
3. Run KDZ_FW_UPD (some antivirus software can recognize it as malicious software, but I have used it, and there is not any problem with this)
4. Select Type: 3GQCT, PhoneMode: DIAG or PhoneMode: Emergency (I don't know what is difference between them, so you have to test it)
5. In KDZ File you are choosing your previously downloaded firmware which is in .kdz format file
6. Boot to Download Mode (vol down + power) in the same moment you have to plug your LG to PC.
7. Wait for drivers installation, if nothing is installing go to the next step.
8. In KDZ_FW_UPD hit Launch Software Update and you have to wait until you see message "===FINISHED==="
That's all.
I used THIS guide.
Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.
qam47 said:
Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.
Click to expand...
Click to collapse
I got the same problem here after using MIUI and trying to get out of it.
Stuck in bootloop, no recovery, download mode stuck at first screen, phone not being detected by pc and no flashing led anymore.
Anyone help us please, my phone is out of warranty too
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.
Rayaxe said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.
Click to expand...
Click to collapse
Thanks for the reply.
But it says:
http://forum.xda-developers.com/showthread.php?t=2582142
VERY IMPORTANT!!!!!!!
You must use the img files that correspond to the ROM you have installed before getting the problem to avoid breaking your phone. The link above is for 10b_EUR_16G firmware version. So don't use those files if your firmware version was not that one. Instead you should look for img files corresponding to the current version installed in your phone. If you don't know what version you've installed then don't use this method because you will break your phone.
Click to expand...
Click to collapse
and i dont know which one to download.
Here is the link to Miui 6, I did install before crashing
http://forum.xda-developers.com/lg-g2/development/kk-miui-6-lg-g2-variants-based-stock-lg-t3106569.
...
You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message
Rayaxe said:
You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message
Click to expand...
Click to collapse
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?
GoPogoOreo! said:
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?
Click to expand...
Click to collapse
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.
Rayaxe said:
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.
Click to expand...
Click to collapse
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device
GoPogoOreo! said:
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device
Click to expand...
Click to collapse
samething with me please help
Hi guys.
Recently I managed to brick and then succesfully unbrick my LG g2 d802 using SRK tool. After that the phone wasn't recognized by PC anymore. Nevertheless, I bricked it once more by mistake and I managed to unbrick it using SRK tool. What was weird was that using the tool I could write the .img files to the corresponding partitions, but after I unbrick the phone, install ANY ROM whatsoever, the phone isn't recognized by PC anymore.
In device manager I can see LGE Modem and LGE Port, but no Phone Drive in My Computer. Can't flash the stock anymore because of that, and I'd really want to go back to stock...
Another issue I'm facing is with the lockscreen on any ROMs based on Stock, every time I restart the phone the lockscreen resets to NONE.
With any custom ROM installed the Virtual Navigation Keys are not shown until I edit the build.prop
Not to mention the LEDs are either not working or staying on any time I unlock the screen,
Anyone with the same problems here?
AndrewGliga said:
Hi guys.
Recently I managed to brick and then succesfully unbrick my LG g2 d802 using SRK tool. After that the phone wasn't recognized by PC anymore. Nevertheless, I bricked it once more by mistake and I managed to unbrick it using SRK tool. What was weird was that using the tool I could write the .img files to the corresponding partitions, but after I unbrick the phone, install ANY ROM whatsoever, the phone isn't recognized by PC anymore.
In device manager I can see LGE Modem and LGE Port, but no Phone Drive in My Computer. Can't flash the stock anymore because of that, and I'd really want to go back to stock...
Another issue I'm facing is with the lockscreen on any ROMs based on Stock, every time I restart the phone the lockscreen resets to NONE.
With any custom ROM installed the Virtual Navigation Keys are not shown until I edit the build.prop
Not to mention the LEDs are either not working or staying on any time I unlock the screen,
Anyone with the same problems here?
Click to expand...
Click to collapse
try another computer to see if phone its recognized.. why not go back to stock using TOT method.
raptorddd said:
try another computer to see if phone its recognized.. why not go back to stock using TOT method.
Click to expand...
Click to collapse
Thank you for your reply.
It was impossible for me to go back to stock with TOT method, but yesterday I fixed the phone after 6 months.
For a weird reason the download mode was broken, LG Flash TOOL was always giving an error. After I flashed SRK's Stock flashable ROM the download mode started to work again (might be a coincidence).
I managed to install the latest KDZ available for d802 (with CSE Flash, from LG Flash TOOL) and finally got the phone fully working, stock version, all functionality is back.
Thank you again for your reply.
hey there, while updating software with lg pc suite my g2 ended up in brick mode and only show the lg symbol.
i tried to install stock rom using this thread
http://forum.xda-developers.com/showthread.php?t=2432476
but, the computer does not recognize my phone, Probably becuase its on fastboot mode and not regular download mode,
i cant seem to find a way to fix it, any suggestions?
thanks!!!
or207 said:
hey there, while updating software with lg pc suite my g2 ended up in brick mode and only show the lg symbol.
i tried to install stock rom using this thread
http://forum.xda-developers.com/showthread.php?t=2432476
but, the computer does not recognize my phone, Probably becuase its on fastboot mode and not regular download mode,
i cant seem to find a way to fix it, any suggestions?
thanks!!!
Click to expand...
Click to collapse
Try this one, it worked for me, seems dangerous, but it seems like you have corrupted qhsusb
https://www.youtube.com/watch?v=E7zbs6of_4I
Whis will allow you to enter to download mode, then you can use the lg flash tool.
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Try nuking download mode and then entering it. If it doesn't work, try the unbrick.
By the way, using capital letters doesn't hurt.
Hello, so I ****ed up with coudyg2 3.3 installation and got soft brick(not first time). Then like always I wanted to go back to stock with kdz method but this time my computed doesn't recognize phone when I'm in download mode and because of that i can't flash my stock rom. Can someone help me with this problem?
Hello, same problem here,, if you have find any solutions please share....Thanks