[Q] revert back to stock - Galaxy Note 3 Q&A, Help & Troubleshooting

i am using ketan firmware and cwm.
i want to revert back to stock firmware and stock recovery.
can someone guide mw atep by step procedure.
would be much appreciated
thanks

Azzyy said:
i am using ketan firmware and cwm.
i want to revert back to stock firmware and stock recovery.
can someone guide mw atep by step procedure.
would be much appreciated
thanks
Click to expand...
Click to collapse
Grab your stock ROM (either from Sammobile.com or around on this very forum) - N900 I assume since you are using Ketan firmware? (this is important to get right) - Exynos Model yes? -
Get Odin, load the .md5 stock rom into Odin AP/PDA slot, put your phone into download mode, and connect to PC - hit start.
Make sure KIES is not running and you have the correct USB drivers installed.

yes its sm-n900 exynos one
and it doesnt matter if i m on cwm recovery?

Azzyy said:
i am using ketan firmware and cwm.
i want to revert back to stock firmware and stock recovery.
can someone guide mw atep by step procedure.
would be much appreciated
thanks
Click to expand...
Click to collapse
is there any problem with dr.ketan firmware? I just want to try it.
To go back to your stock rom / firmware just download the stock rom first from sammobile.
On cwm do wipe / factory reset, then wipe everything else such as cache partition and dalvik cache.
Format the /system, /sdcard etc. That the step that I always do to go back to stock frimware to make sure I got it clean.
Hope it help.

Dr.Ketan works awesome
we just got stock kit kat update here and i want to try stock kit kat first and i might switch back to dr.ketan after that
n thanks for ur help

zonicz said:
is there any problem with dr.ketan firmware? I just want to try it.
Click to expand...
Click to collapse
I'd say he probably just wants stock back. @dr.ketan's ROMS are, from what I have read one of, if not the best for Exynos models of Note 3- I cannot comment myself due to having an N9005.

zonicz said:
is there any problem with dr.ketan firmware? I just want to try it.
To go back to your stock rom / firmware just download the stock rom first from sammobile.
On cwm do wipe / factory reset, then wipe everything else such as cache partition and dalvik cache.
Format the /system, /sdcard etc. That the step that I always do to go back to stock frimware to make sure I got it clean.
Hope it help.
Click to expand...
Click to collapse
Hi,
Can I flash the stock ROM with no problem after formatting system? Is it Safe?
Thanks
Sent from my SM-N9005 using Tapatalk

Dahdoul said:
Hi,
Can I flash the stock ROM with no problem after formatting system? Is it Safe?
Thanks
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
It should be OK flashing stock from a wipe.

Dahdoul said:
Hi,
Can I flash the stock ROM with no problem after formatting system? Is it Safe?
Thanks
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
yes, wipe data / factory reset would be enough. but I always prefer to get a Clean install.

Related

[Q] Need help with complete restore to stock

I have installed lite'ning rom, but I need to completely restore i.e. remove root, remove CWM..etc
any pointers where to start?
p.s. I have downloaded the stock rom from this thread:
http://forum.xda-developers.com/showthread.php?t=1075278
Wipe data/cache from CWM recovery
Flash the rom you downloaded.
wouldn't that keep CWM though?
I'm guessing it won't after resetting phone to factory settings.
Sent from my Galaxy S II
linkin85 said:
wouldn't that keep CWM though?
Click to expand...
Click to collapse
In samsung land the recovery joined with the kernel, so flashing a stock rom with a stock kernel will remove CWM.
if it's not clear, you have to wipe data/cache and then flash the rom via Odin or Heimdall.
I would recommend you flashing VillainRom 1.1 if you want to stay on the custom side of life.. or buying a usb-jig if you want to send it in for service or so.
Sent from my GT-I9100 using XDA App

Word of Caution ! Do Not Do a Full Wipe In CWM On NEW GERMANY ICS

Ok so i flashed ICS onto my galaxy note with CMW. I then boot into CMW recovery and i pressed wipe data to factory reset. The phone got stuck on wiping data and i pressed the power button. This caused it to restart but it got stuck on samsung logo. I thought ok i will just flash GB rom using PC odin but this did not work. I will send it back to samsung tomorrow for repair, hopefully they repair it. My binary count is 'no', can they tell if i have CMW on it?
ANYWAY YOU ARE WARNED!!! DO NOT WIPE ON THE OFFICIAL ICS ROM.
If you are getting to the samsung logo, have you tried starting in download mode or recovery mode and then re-flashing the rom?
Sent from my GT-N7000 using XDA
What is your phone's history? Stock gb or yours one used to be flashed with any leaked ics kernel or rom? This is giving people getting more details what they should or should not do.
Sent from my GT-N7000 using xda premium
pezx44 said:
If you are getting to the samsung logo, have you tried starting in download mode or recovery mode and then re-flashing the rom?
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
I can't even get to recovery anymore; i get this everytime 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' PC odin keeps getting stuck at factoryfs.img
becknise said:
I can't even get to recovery anymore; i get this everytime 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' PC odin keeps getting stuck at factoryfs.img
Click to expand...
Click to collapse
Question is can you go into download mode now? Another is to see your responding to my above question.
Sent from my GT-N7000 using xda premium
veasna.kelly said:
What is your phone's history? Stock gb or yours one used to be flashed with any leaked ics kernel or rom? This is giving people getting more details what they should or should not do.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I once flashed a leaked ICS rom but i only had it for 1 hour and i went back to stock GB using PC Odin. Today i flashed official ICS and i wiped and that's where the problem began. I can still boot to download mode if it helps?
please change the title
to
WARNING DO NOT WIPE VIA CWM ON NEW GERMANY ICS
the stock recovery works fine..infact thats how i got it working after flashing to ICS via odin from stock GB
I needed to go to stock launcher and wipe cache and data
PLUS am sure by now most read users know NOT to do wiping and restoring operations on CWM on the new german ICS..
veasna.kelly said:
Question is can you go into download mode now? Another is to see your responding to my above question.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes i can go into download mode.
search the thread on this forum and look for flashing prerooted gb lc1 rom with pit file via PC odin and make sure you are on the right pit file version bf flash.
Just read more and maybe this could help you at least back to gb when your phone still be able to boot into download mode.
Pls note that your phone on a risk now and do this at your own risk.
Sent from my GT-N7000 using xda premium
Delete this thread! I wipe and wipe and wipe....no problems...all depend where u coming from....so stop all this stupid warnings......or stop flashing any ROMs.
I believe the problem is a little more complex than just wiping with CWM. And I believe OP should describe a little bit more of history before I got to that point.
I have personally just wiped data/factory reset with CF-CWM with NO problem at all.
I went from stock GB KK2 to stock ICS LPY using CF-CWM . Did not wipe anything before the update. Everything went smooth. Today I decided to wipe in order : Dalvik - Cache - and finally data/factory reset , all from the CWM recovery screen, that I started from the CWM Manager. Rebooted my SGN and everything was fine.
P_
pakalrtb said:
I believe the problem is a little more complex than just wiping with CWM. And I believe OP should describe a little bit more of history before I got to that point.
I have personally just wiped data/factory reset with CF-CWM with NO problem at all.
I went from stock GB KK2 to stock ICS LPY using CF-CWM . Did not wipe anything before the update. Everything went smooth. Today I decided to wipe in order : Dalvik - Cache - and finally data/factory reset , all from the CWM recovery screen, that I started from the CWM Manager. Rebooted my SGN and everything was fine.
P_
Click to expand...
Click to collapse
As quoted many times, some people can wipe 1000 times until brick or even forever and it may never happen, even on leaked kernel, if you wiped 500 times still dont mean it is safe for everyone.
I can only speak from my experience, but I also have had no problems with LPY ICS.
I came from CM9, but I decided to flash stock GB with PC odin before flashing LPY.
Rooted GB with the zergrush exploit, then flashed LPY with CF_root kernel using mobile odin pro.
Made a backup of LPY and a factory reset wipe in CWM. No problems at all.
No idea if I just got lucky or not. Bit nervous about using it, thinking to go back to CM9, to be safe.
nandihno said:
please change the title
to
WARNING DO NOT WIPE VIA CWM ON NEW GERMANY ICS
the stock recovery works fine..infact thats how i got it working after flashing to ICS via odin from stock GB
I needed to go to stock launcher and wipe cache and data
PLUS am sure by now most read users know NOT to do wiping and restoring operations on CWM on the new german ICS..
Click to expand...
Click to collapse
Stock recovery does not work fine - we have at least one incident of someone experiencing eMMC damage after a wipe with stock recovery
As stated EVERYWHERE - Just because some people are able to wipe successfully doesn't mean everyone is safe. The chance of bricking is maybe 5-10%, but:
On safe kernels it's 0%
Those who have wiped before are not guaranteed to continue being OK - over in the Epic 4G Touch forums, some users experienced problems after safely wiping 10-20 times or more. Some people's devices died on the first wipe, other's continue to be fine
becknise said:
Ok so i flashed ICS onto my galaxy note with CMW. I then boot into CMW recovery and i pressed wipe data to factory reset. The phone got stuck on wiping data and i pressed the power button. This caused it to restart but it got stuck on samsung logo. I thought ok i will just flash GB rom using PC odin but this did not work. I will send it back to samsung tomorrow for repair, hopefully they repair it. My binary count is 'no', can they tell if i have CMW on it?
ANYWAY YOU ARE WARNED!!! DO NOT WIPE ON THE OFFICIAL ICS ROM.
Click to expand...
Click to collapse
Hi becknise. What was the leaked ICS rom that you flashed ? Did you flash CM9 or a variant ?
becknise said:
Ok so i flashed ICS onto my galaxy note with CMW. I then boot into CMW recovery and i pressed wipe data to factory reset. The phone got stuck on wiping data and i pressed the power button. This caused it to restart but it got stuck on samsung logo. I thought ok i will just flash GB rom using PC odin but this did not work. I will send it back to samsung tomorrow for repair, hopefully they repair it. My binary count is 'no', can they tell if i have CMW on it?
ANYWAY YOU ARE WARNED!!! DO NOT WIPE ON THE OFFICIAL ICS ROM.
Click to expand...
Click to collapse
Hmmm...
Interesting... actually in the 1st place y did u press the power button during wipe? This mayb the reason rather than Germany ICS for ur case...
If the phone got stuck, the phone wont respond even if u press the power button.. i suspect its doing wiping in the background... need to b a little patient.
I once had wipe data for abt 15 - 20 mins but i juz let it do the job till it said its completed...
Noted From My G.NOTE Using XDA Premium
I absolutely do not understand this at all. But, I guess no one does.
There's GOT to be some variables that are similar with everyone that has the bricks happening. I have not bricked and I have been on about 4 or 5 leaked ROMs (and kernels). But, I decided not to take any more chances and I am on official ICS rom now, however, I did not flash CF Root kernel with the Open Germany ICS Rom. I got root by flashing CWM.zip and Busybox (per Dr.Ketan's post).
rogconnect said:
Delete this thread! I wipe and wipe and wipe....no problems...all depend where u coming from....so stop all this stupid warnings......or stop flashing any ROMs.
Click to expand...
Click to collapse
Not stupid.
Same thing has happened to lot of people including me.
I didnt ever touch CM9. Went from GB safe kernel straight to LPY. And did data/factory reset from CWM and bam... Phone is bricked.
DId not touch Nandroid, Did not restore, did nothing other than wipe.
I can get into download mode and CWM recovery. Even managed to flash the redpill recovery and GB rom via CWM but phone wont boot. ODIN cannot flash and gets stuck at NAND flashing step.
Its not stupid warning. Its a valid warning.
andreww88 said:
I absolutely do not understand this at all. But, I guess no one does.
I did not flash CF Root kernel with the Open Germany ICS Rom. I got root by flashing CWM.zip and Busybox (per Dr.Ketan's post).
Click to expand...
Click to collapse
I didn't even do that. I got root using Mobile Odin Pro and injecting SuperSU from the CheckRom/Abyss 6.2 GB ROM. I cannot imagine anywhere else I may have got root. I did not use CF Root during or after the flash of LPY. I have stock recovery with fully rooted Stock LPY.
Now My question is how to flash a ZIP file of a Custom ROM without using CWR... Unless they release them in Tars as well as Zips. In which case the ROM is likely to have the CWR in the kernel anyway.
tbong777 said:
Now My question is how to flash a ZIP file of a Custom ROM without using CWR... Unless they release them in Tars as well as Zips. In which case the ROM is likely to have the CWR in the kernel anyway.
Click to expand...
Click to collapse
Stay stock and rooted. Study what these custom roms have modified and do it yourself. Most of the time, it's eye-candy flavor that they add for those who want it the easy way. They should be aptly called "customizer" instead of "devs".
Then again, that's just me
Zapped through server hops to XDA forums

Please Help! -TWRP issues

I have had several custom roms using TWRP with no problems. Today I decided to try pacman rom and nandroid backed up my negalite wonderom. downloaded pacman to external card, rebooted to TWRP. I formatted internal storage and did full wipes on everything but external sd. I tried installing pacman zip and get FAILED unzipping and updating partition. so I then try flashing my old rom and get same error. I then nandroid back to previous rom and boots as expected. If i reboot again, I get stuck on samsung galaxy s4 boot screen. I've tried repeating all these steps but now I am without a phone until one of you nice people help me. What can I do? Please help.
csrredcoat said:
I have had several custom roms using TWRP with no problems. Today I decided to try pacman rom and nandroid backed up my negalite wonderom. downloaded pacman to external card, rebooted to TWRP. I formatted internal storage and did full wipes on everything but external sd. I tried installing pacman zip and get FAILED unzipping and updating partition. so I then try flashing my old rom and get same error. I then nandroid back to previous rom and boots as expected. If i reboot again, I get stuck on samsung galaxy s4 boot screen. I've tried repeating all these steps but now I am without a phone until one of you nice people help me. What can I do? Please help.
Click to expand...
Click to collapse
Odin back to stock.
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Odin back to stock.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I did odin back to stock, ut i am stuck on galaxy s4 boot screen. What can I do to fix? Thanks
During this whole ordeal, I was trying to install CWM over TWRP and accidentally checked repartition in ODIN, it didn't seem to do anything ..just hanged and I pulled battery. I am now wondering if this screwed anything up and if so, what can I do?
csrredcoat said:
I did odin back to stock, ut i am stuck on galaxy s4 boot screen. What can I do to fix? Thanks
Click to expand...
Click to collapse
Take out battery. Put in back in. Go to stock recovery (by pressing volume up and power button and letting go when you see tiny blue letters) from there just do a factory reset then reboot. Dont worry if you a dead android its ok. Then you should be ok.
---------- Post added at 11:28 PM ---------- Previous post was at 11:12 PM ----------
csrredcoat said:
During this whole ordeal, I was trying to install CWM over TWRP and accidentally checked repartition in ODIN, it didn't seem to do anything ..just hanged and I pulled battery. I am now wondering if this screwed anything up and if so, what can I do?
Click to expand...
Click to collapse
Well from my understanding we should not have repartition checked. Dont know the outcomes tho but im pretty sure now you need pit files for gs4 sprint to remap the partitions for your phone back the way it was. Should be here in xda but if you cant find them then just odin again a stock tar and do a factory reset in stock recovery. See if that works.
Back to Stock but have a question
So I was able to successfully odin back to stock. I am confused about format data vs wipes. I had some issues on a ROM and someone in a forum advised to format to truly erase any junk left behind by other roms. I did this in TWRP and installed a rom and it fixed the former issues I had on that rom. So I thought I had a new strategy, to format not just wipe.
So now I have CWM and don't even see the option to format data. If I want to make sure I erase everything, how do I ? Just doing factory reset, wipe data, cache and dalvik seems to leave files behind including personal files on internal storage. Just want to learn the best practices to avoid issues. I am kinda glad this happened, been a learning lesson. Thanks to all!
Software/Baseband Version MDC to MF9
After ODIN back to stock I am on MDC and want to get back to MF9. This is the procedure I used a few months ago HERE Is this the best way? Thanks.
csrredcoat said:
So I was able to successfully odin back to stock. I am confused about format data vs wipes. I had some issues on a ROM and someone in a forum advised to format to truly erase any junk left behind by other roms. I did this in TWRP and installed a rom and it fixed the former issues I had on that rom. So I thought I had a new strategy, to format not just wipe.
So now I have CWM and don't even see the option to format data. If I want to make sure I erase everything, how do I ? Just doing factory reset, wipe data, cache and dalvik seems to leave files behind including personal files on internal storage. Just want to learn the best practices to avoid issues. I am kinda glad this happened, been a learning lesson. Thanks to all!
Click to expand...
Click to collapse
Im not so sure on CWM since ive been using twrp so I can help you there.
csrredcoat said:
After ODIN back to stock I am on MDC and want to get back to MF9. This is the procedure I used a few months ago HERE Is this the best way? Thanks.
Click to expand...
Click to collapse
Its better if you just accept ota (*optional* do a factory reset when already at mf9.) Or just get the mf9 stock tar and just odin that when you have problems
You can download the mf9 tar here
http://forum.xda-developers.com/showthread.php?t=2375523
ROMANTiC KiD said:
Im not so sure on CWM since ive been using twrp so I can help you there.
Its better if you just accept ota (*optional* do a factory reset when already at mf9.) Or just get the mf9 stock tar and just odin that when you have problems
You can download the mf9 tar here
http://forum.xda-developers.com/showthread.php?t=2375523
Click to expand...
Click to collapse
OK, I am confused but eager to learn. I just did a ODIN back to stock, I am now unrooted. I did a factory reset in stock recovery. Now I think I should be able to click update firmware to get to MF9 but it says no updates found or I am up to date. I don't get this. Why is it not finding any updates?
Even More Confused!
edit
Ok, it is downloading MF9 in background now. Not sure why it initially said no updates found. I should be good now. Thanks!

[Q] Help!! Urgent!

So, I got jealous of my brother... I too wanted a custom rom for my GT-i9500... I downloaded "pac_jfltexx-Black-Power-Edition_20140106"....
Downloaded Gapps.. After I did all the steps, which were:
1. Wipe cache
2. Wipe Data/factory reset
3. Wipe dalvik cache
4. Format /system
Then I selected, install zip from external SD card... I saw that, it said during installition, "Installing for i9505", and I was like whaa!?!? Afterwards, I did a search on the internet that what happens when we format system, it said that you ought to install a ROM because the system is without an OS..
After realizing my mistake, I STILL went ahead and installed it like a retard xD..
And now again I did all the above steps, somehow I have the CWM 6.0.3.3 still installed and opened right here... I am not able to do anything on my phone... Please tell me how to overcome this situation...
I searched on the internet, I found out that I can still install any ROM. I'm downloading KingCobra ROM build 5...
Now what do I do?
P.S.- I have a nandroid backup, but its not on my phone's sd card or the ext sd card, its on my computer, can I do anything with that backup and use odin to flash the backup?
- Download one firmware of Sammobile good for ur i9500
- Full wipe(data,system, cache and dalvick cache) in Recovery
- Go to Download Mode
- Flash the new firmware with Odin
- Enjoy it
Joku1981 said:
- Download one firmware of Sammobile good for ur i9500
- Full wipe(data,system, cache and dalvick cache) in Recovery
- Go to Download Mode
- Flash the new firmware with Odin
- Enjoy it
Click to expand...
Click to collapse
Thanks, but I'm already downloading KingCobra ROM... I can flash that too right?
Hey, but the new ROM is in .zip format. Odin doesn't read it. WHAT TO DO?! PLEASE HELP!
TheSinister said:
Hey, but the new ROM is in .zip format. Odin doesn't read it. WHAT TO DO?! PLEASE HELP!
Click to expand...
Click to collapse
Flash it in CUSTOM RECOVERY
Joku1981 said:
Flash it in CUSTOM RECOVERY
Click to expand...
Click to collapse
But, I don't know how to put it there...My computer is not showing my device in My Computer..?
I have an idea.. I am going to put the downloaded ROM on the extSDcard via a Card Reader, and then maybe I can flash it? Or I can put my nandroid backup there?
Will this work?
Alright, so I put the KingCobra on the extSDcard via card reader, and I flashed it after wiping cache, data/facotory reset, system /format, and wipe dalvik cache....
I flashed it. But I didn't flash the Gaaps since it wasn't written there...
My phone proceeded the display "Samsung GT-i9500", then the music played of Samsung, and right now it's just there, the LED giving off blue light, getting dim and bright, I am just there for the last 5 minutes..
P.S.- The zip of KingCobra was of 1.4 GB...I downloaded the build 5 from here
http://forum.xda-developers.com/showthread.php?t=2497087
It's still stuck, what to do? Or just sit back since it's a big ROM?
Finlyno Had
Okay, I read on the KingCobra forum place on XDA. It said, that I'll have to flash a pit file. And many other instructions which I didn't understand. The startup sucked my whole phone's battery, and the only change was that the LED started to blink in Green color as well as Blue... Right now, my phone is just lying, I'm charging the battery, and it's playing the Red LED.
Please help, I don't know what to do.
need sacteh
I had a nandroid backup. I restored my phone. But now stuck at the samsung boot logo... Please help.. :crying:
I did a factory rest, flashed the restore, wiped cache, wiped dalvik cache, now stuck at samsung logo again :crying: :crying: :crying:
Pretty sure you were told in the first reply you got to go get a stock rom from Samfirmware & flash it with Odin to get a 'clean slate' & to then either re-root your phone and try flashing the custom rom again (and maybe read the flashing instructions for the rom in question this time) or restore a backup.
Oh...Look...That's exactly what you were told (and you haven't done it)
You clearly have no idea what you're doing (how to recover in particular, and obviously how to flash the rom in question as well), I strongly suggest you do what was suggested (flash a stock rom) if you want your phone working again anytime soon.
If you have philz recovery, then you can attach a memory stick with an usb otg cable, and make a restore from there, or install a new rom
Enviado desde mi SGH-I337M mediante Tapatalk
MistahBungle said:
Pretty sure you were told in the first reply you got to go get a stock rom from Samfirmware & flash it with Odin to get a 'clean slate' & to then either re-root your phone and try flashing the custom rom again (and maybe read the flashing instructions for the rom in question this time) or restore a backup.
Oh...Look...That's exactly what you were told (and you haven't done it)
You clearly have no idea what you're doing (how to recover in particular, and obviously how to flash the rom in question as well), I strongly suggest you do what was suggested (flash a stock rom) if you want your phone working again anytime soon.
Click to expand...
Click to collapse
I tried downloading the ROM from there, but it's giving an error, I tried from my friend's home, still the same error, so I'm pretty sure that it's the site's problem. Right now I'm following these particular instructions...
http://forum.xda-developers.com/showthread.php?t=2265477
If I encounter a problem, I'll surely ask before doing anything reckless...
vashminted said:
If you have philz recovery, then you can attach a memory stick with an usb otg cable, and make a restore from there, or install a new rom
Enviado desde mi SGH-I337M mediante Tapatalk
Click to expand...
Click to collapse
No, I don't, I have CWM recovery 6.0.3.3.
TheSinister said:
I tried downloading the ROM from there, but it's giving an error, I tried from my friend's home, still the same error, so I'm pretty sure that it's the site's problem. Right now I'm following these particular instructions...
http://forum.xda-developers.com/showthread.php?t=2265477
If I encounter a problem, I'll surely ask before doing anything reckless...
Click to expand...
Click to collapse
If your having a problem with downloading the rom from samsung. Give me the exact link and ill be happy to make a mirror for you in MEGA. Have a nice day.
Sent from Hell ?
Repulsa said:
If your having a problem with downloading the rom from samsung. Give me the exact link and ill be happy to make a mirror for you in MEGA. Have a nice day.
Sent from Hell ?
Click to expand...
Click to collapse
Okay people, everyone, thanks for your help,
I followed this guide:
http://forum.xda-developers.com/showthread.php?t=2265477
And my phone works fine now!
I don't care about the applications.. XD

[Q] Need help with cwm recovery

Hey guys, i'm kinda new to rooting(had iphone previously) and i'm having some trouble. The phone is rooted already(4.4.2), i installed ROM manager and now i dont know how to boot it to cwm recovery, every tutorial i follow it goes to stock recovery. I tried installing cwm with odin but it doesn't get through setup connection, or it does but it fails. I wanted to get the google edition ROM. Thanks in advance
Hetfield88 said:
Hey guys, i'm kinda new to rooting(had iphone previously) and i'm having some trouble. The phone is rooted already(4.4.2), i installed ROM manager and now i dont know how to boot it to cwm recovery, every tutorial i follow it goes to stock recovery. I tried installing cwm with odin but it doesn't get through setup connection, or it does but it fails. I wanted to get the google edition ROM. Thanks in advance
Click to expand...
Click to collapse
Have you tried the below app? Supposed to be good for flashing things.
https://play.google.com/store/apps/details?id=neldar.sgs.kernel.flasher
Sent from my GT-I9505 using Tapatalk
what is exactly flashing kernel? is it the same as flashing cwm recovery? so confused atm
Hetfield88 said:
what is exactly flashing kernel? is it the same as flashing cwm recovery? so confused atm
Click to expand...
Click to collapse
You don't need flash any kernel for have a custom recovery. Take a look:
~ For i9500: HERE
~ For i9505: HERE
Joku1981 said:
You don't need flash any kernel for have a custom recovery. Take a look:
Click to expand...
Click to collapse
Thanks a lot man!
Edit:ahem i think i messed up, i got the custom recovery to work, then i did a wipe to install the google rom, but it failed for some reason, what do i do now?
You sound like you really don't know what you're mate.
I think the best advice anyone can give you is to put your phone down and read some more.
If you have successfully flashed CWM then all you need to do is flash a ROM of your choice then wipe data / factory reset.
Also before you even think about flashing anything to your phone you NEED to back up your EFS partition.
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
You sound like you really don't know what you're mate.
I think the best advice anyone can give you is to put your phone down and read some more.
If you have successfully flashed CWM then all you need to do is flash a ROM of your choice then wipe data / factory reset.
Also before you even think about flashing anything to your phone you NEED to back up your EFS partition.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
you're right but now, since it's in recovery mode i have to fix this asap. i entered the recovery and did wipe data/factory reset like the tutorial said, then proceeded to install zip(the ROM) but it fails E/... status 7 installation aborted.
and i did backup data and sd card but the backups are in my pc and i cant get to them in recovery mode :/
Hetfield88 said:
you're right but now, since it's in recovery mode i have to fix this asap. i entered the recovery and did wipe data/factory reset like the tutorial said, then proceeded to install zip(the ROM) but it fails E/... status 7 installation aborted.
and i did backup data and sd card but the backups are in my pc and i cant get to them in recovery mode :/
Click to expand...
Click to collapse
Don't panic bad it's just down to the version of recovery ?
Just go back into recovery & try flashing again once you get status 7 go back & second line from bottom where you chose zip you will see "allow update old binary" tick the box if not ticked or until if it's selected then select zip to flash & it'll go straight through

Categories

Resources