Related
I have the sprint S4. it was rooted and on stock 4.2.2. i updated it to 4.3 and it went into a bootloop. I then tried reverting to my nandroid from earlier today and now it won't boot at all, it just goes to a screen that says, firmware upgrade encountere an issue. please select recovery mode in kies and try again. there is a list on the top left that says,
current binary:custom
system status:custom
knox kernel lock: 0x0
knox warranty void: 0x1
csb-config-lsd: 0x30
write protection enable
emmc burst mode enable
I need to get this fixed. back to 4.2.2 or 4.3 i honestly don't care at this point. any help would be appreciated. with or without root is fine with me. i can't access recovery anymore, only download mode.
samuelrp1998 said:
I have the sprint S4. it was rooted and on stock 4.2.2. i updated it to 4.3 and it went into a bootloop. I then tried reverting to my nandroid from earlier today and now it won't boot at all, it just goes to a screen that says, firmware upgrade encountere an issue. please select recovery mode in kies and try again. there is a list on the top left that says,
current binary:custom
system status:custom
knox kernel lock: 0x0
knox warranty void: 0x1
csb-config-lsd: 0x30
write protection enable
emmc burst mode enable
I need to get this fixed. back to 4.2.2 or 4.3 i honestly don't care at this point. any help would be appreciated. with or without root is fine with me. i can't access recovery anymore, only download mode.
Click to expand...
Click to collapse
You can try this >>>> to reset to stock MF9 -[ROM][ODIN]SPH-L720 MF9 (MF9 Modem/Kernel/Bootloader/ROM-Rooted) from here:
http://forum.xda-developers.com/showthread.php?t=2486134
Also make sure you read my post #16 in the thread above, other wise you will be in bootloop again.
Good luck
liquid307 said:
You can try this >>>> to reset to stock MF9 -[ROM][ODIN]SPH-L720 MF9 (MF9 Modem/Kernel/Bootloader/ROM-Rooted) from here: http://forum.xda-developers.com/show....php?t=2486134
Good luck
Click to expand...
Click to collapse
Thanks going to try that now. it says not found when i click the link.
samuelrp1998 said:
Thanks going to try that now. it says not found when i click the link.
Click to expand...
Click to collapse
click link on my post.
Here it is again:
http://forum.xda-developers.com/showthread.php?t=2486134
toolyic and
samuelrp1998 said:
I have the sprint S4. it was rooted and on stock 4.2.2. i updated it to 4.3 and it went into a bootloop. I then tried reverting to my nandroid from earlier today and now it won't boot at all, it just goes to a screen that says, firmware upgrade encountere an issue. please select recovery mode in kies and try again. there is a list on the top left that says,
current binary:custom
system status:custom
knox kernel lock: 0x0
knox warranty void: 0x1
csb-config-lsd: 0x30
write protection enable
emmc burst mode enable
I need to get this fixed. back to 4.2.2 or 4.3 i honestly don't care at this point. any help would be appreciated. with or without root is fine with me. i can't access recovery anymore, only download mode.
Click to expand...
Click to collapse
I'm a total noob and did the same thing to my phone but I'm pretty sure this is what you need to fix it http://samsung-updates.com/device/?id=SPH-L720 you can't use MF9 it won't work since you've updated to 4.3. It will take a while to download but just be patient and flash with odin 3.185 :fingers-crossed: Good Luck!
^^ What that person said.
Sent from my SPH-L720 using xda app-developers app
Hi everyone, I'm desperate here.
I was following DJembey's root method TO THE WORD/LETTER. Everything was fine up until the last bit in changing the 'custom' status to official. The triangle away method didn't work, so I downloaded the 'OFFICIAL_STATUS_MOD' and used odin to try and flash the PDA, but it came up as 'FAIL' and now my phone is stuck on boot mode with 'FIRMWARE UPGRADE ENCOUNTERED AN ISSUE'. I've tried using odin to flash back to the stock rom, but it keeps coming up with 'FAIL'. Rally need help
DJembey's root method:
http://forum.xda-developers.com/showthread.php?t=2255190
jesus1987 said:
Hi everyone, I'm desperate here.
I was following DJembey's root method TO THE WORD/LETTER. Everything was fine up until the last bit in changing the 'custom' status to official. The triangle away method didn't work, so I downloaded the 'OFFICIAL_STATUS_MOD' and used odin to try and flash the PDA, but it came up as 'FAIL' and now my phone is stuck on boot mode with 'FIRMWARE UPGRADE ENCOUNTERED AN ISSUE'. I've tried using odin to flash back to the stock rom, but it keeps coming up with 'FAIL'. Rally need help
DJembey's root method:
http://forum.xda-developers.com/showthread.php?t=2255190
Click to expand...
Click to collapse
what firmware you are trying to root, and what stock firmware you tried to flash?
Here's what it says, this is the firmware I am trying to flash, but just before I did the root guide, I applied all of the official updates through settings >about phone > update, etc. It was still on 4.2.2 and I think it was october edition of the latest firmware (in UK)
samersh72 said:
what firmware you are trying to root, and what stock firmware you tried to flash?
Click to expand...
Click to collapse
So maybe I am trying to flash to an older firmware, is this not allowed?? Also, it says that the PIT partition is missing on ODIN (as seen on the attached picture)
jesus1987 said:
So maybe I am trying to flash to an older firmware, is this not allowed?? Also, it says that the PIT partition is missing on ODIN (as seen on the attached picture)
Click to expand...
Click to collapse
i think you have the secured bootloader (check if you have Knox void 0x0 or something in download mode) if yes, you can not go back to MDM or an old firmware, you can flash new "knoxed" firmware.
note that Triangle away and other stuffs to reset counter or status, wont work on new firmware.
samersh72 said:
i think you have the secured bootloader (check if you have Knox void 0x0 or something in download mode) if yes, you can not go back to MDM or an old firmware, you can flash new "knoxed" firmware.
note that Triangle away and other stuffs to reset counter or status, wont work on new firmware.
Click to expand...
Click to collapse
So, when I go into 'proper' download mode (pressing Vol. Down + Home + power) I have:
ODIN MODE
PRODUCT NAME:GT-I9505
CURRENT BINARY:Samsung Official
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID:0x1(or t?)
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION:Enable
And for the 'Firmware upgrade encountered an issue...' screen, I have:
ODIN MODE
PRODUCT NAME:GT-I9505
CURRENT BINARY:Samsung Official
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID:0x1(or t?)
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION:Enable
Hope this helps
jesus1987 said:
So, when I go into 'proper' download mode (pressing Vol. Down + Home + power) I have:
ODIN MODE
PRODUCT NAME:GT-I9505
CURRENT BINARY:Samsung Official
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID:0x1(or t?)
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION:Enable
And for the 'Firmware upgrade encountered an issue...' screen, I have:
ODIN MODE
PRODUCT NAME:GT-I9505
CURRENT BINARY:Samsung Official
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID:0x1(or t?)
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION:Enable
Hope this helps
Click to expand...
Click to collapse
it seems you have the secured bootloder, dont use triangle away or somthing else to reset counter and status.
you can flash firmware that begin only with I9505XXUD or I9505XXUE
samersh72 said:
it seems you have the secured bootloder, dont use triangle away or somthing else to reset counter and status.
you can flash firmware that begin only with I9505XXUD or I9505XXUE
Click to expand...
Click to collapse
At the moment I'm downloading "I9505XXUDMI1-PRE-ROOTED-ODEX-FULL.rar", will this work do you think when I try and flash using ODIN? Hope so!!!
Right, I've tried that firmware, and it's still failing on odin any ideas?
samersh72 said:
it seems you have the secured bootloder, dont use triangle away or somthing else to reset counter and status.
you can flash firmware that begin only with I9505XXUD or I9505XXUE
Click to expand...
Click to collapse
Seems this one doesn't work either...
I've noticed something weird though, I've tried running it a few times, and each time it seems to get a little further in the flash process (it gets to just past modem) then fails.
Hello,
what USB cable are you using?
I have encountered an issue with the original Samsung cable, ("fail" in Odin all the time), but when I switched to another usb cable everything worked from that moment on
Try it, you might have luck.
Zeitraffer said:
Hello,
what USB cable are you using?
I have encountered an issue with the original Samsung cable, ("fail" in Odin all the time), but when I switched to another usb cable everything worked from that moment on
Try it, you might have luck.
Click to expand...
Click to collapse
Funny you should say that...
I restarted my PC, and tried a few USB ports, and cables, and it was still failing. But I stuck at it, and literally doing the same procedure over and over seems to have worked, as it randomly decided to flash fine! This was using the XXUE firmware
Do you still have KNOX WARRANTY 0X1 in download mode?
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
Do you still have KNOX WARRANTY 0X1 in download mode?
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Yeah, it still says KNOX WARRANTY VOID 0x1 but it also says the binary and system status are official. Is there a way to unvoid?
I went into download mode and there was nothing about knox 0x0 or 0x1. It does however, say "system status: custom" and when I rebooted, it says "custom" on the samsung flash with an unlocked lock. I followed the instructions from rootjunky and I seem to have root, but as for knox and my warranty, I'm not sure if I screwed up big time.
Edit: Okay, so I did a bit more searching and I guess "system status: custom" doesn't have anything to do with knox so I'm okay? Also, what caused this? towelroot, supersu, rootchecker? I still would like to know I can tell if I tripped knox though.
Chowlz said:
I went into download mode and there was nothing about knox 0x0 or 0x1. It does however, say "system status: custom" and when I rebooted, it says "custom" on the samsung flash with an unlocked lock. I followed the instructions from rootjunky and I seem to have root, but as for knox and my warranty, I'm not sure if I screwed up big time.
Edit: Okay, so I did a bit more searching and I guess "system status: custom" doesn't have anything to do with knox so I'm okay? Also, what caused this? towelroot, supersu, rootchecker? I still would like to know I can tell if I tripped knox though.
Click to expand...
Click to collapse
I believe it will say Knox Warranty Status Void or Warranty Bit 0x1, either way you will know if you tripped it in download mode. Towelroot dose not trip knox. As for custom status having root and having a modified system will cause this. It will return to Official when you Odin back to stock with no root.
Misterxtc said:
I believe it will say Knox Warranty Status Void or Warranty Bit 0x1, either way you will know if you tripped it in download mode. Towelroot dose not trip knox. As for custom status having root and having a modified system will cause this. It will return to Official when you Odin back to stock with no root.
Click to expand...
Click to collapse
Awesome! Thanks for the reply!
Hi, I rooted my GT-i9301i last week, disabled Knox with SuperSU, flashed CWM and installed CM11 and CM12. I unrooted and went back to stock firmware using Odin because my phone doesn't vibrate normally anymore. I wanted to know if I still had my warranty. But my phone doesn't have a flash counter. I read that with newer Samsung phones there is a Knox counter and that you can check it by going into Download Mode. But there is no 'Knox Kernel Lock' and 'Knox Warrenty Void'. Oh and it says that I have a GT-I9300I but I have a GT-I9301I. Now I don't know if my warranty is void. Hope you guys can help me.
In Download Mode I see:
ODIN MODE
PRODUCT NAME: GT-I9300I
CURRENT BINARY: Samsung Official
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, A1, P1
UDC START
You can install app "Phone INFO Samsung" (http://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo). Except others the app will also show you the status of Knox warranty void.
Some S3 Neo single SIM phones (I9301I) in Download mode incorrectly show I9300I (it is mentioned here on XDA).
Please share your results, I'm also interested what mentioned app will show re Knox status. Also could you tell me which root did you use? Thank you.
hi, mine "knox warranty void" is 0x0 ...
Consider i've changed recovery to cwm trought Odin 3.09, applied knox disabler script, applied root and saved my stock rom..
All in this order..
And then installed after a format /system and wipe data/cache, the new rom CM 12 5.02 lollipop....
Happy new year to all...
Hi l.sabatini, so if I undestand, you rooted your device according to this thread: http://forum.xda-developers.com/gal...overy-t-r-p-samsung-galaxy-s3-neo-gt-t2906840. Am I right?
And "knox warranty void" 0x0 is shown in the app I posted above or in download mode? I'm asking as some devices doesn't have this info in download mode...
if I can help, I never modded my phone and in download mode appears to me I9300I, although I have a I9301I.
mario_21 said:
Hi l.sabatini, so if I undestand, you rooted your device according to this thread: http://forum.xda-developers.com/gal...overy-t-r-p-samsung-galaxy-s3-neo-gt-t2906840. Am I right?
And "knox warranty void" 0x0 is shown in the app I posted above or in download mode? I'm asking as some devices doesn't have this info in download mode...
Click to expand...
Click to collapse
i've rooted with update super_su 2.40 made by chainfire after have flashed recovery.tar.md5 (containing cwm 6.0.5.1) trought odin 3.09..
before root i've applied knox disabler script and THEN super_su
When you have stock firmware installed back then your warranty is back! But also you need to unroot your device to avoid the warranty
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: Samsung Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P3
SECURE DOWNLOAD : ENABLE
UDC START
I gave my note3 to a technician, there was a problem (It didn't boot, instead stuck on samsung logo with recovery booting). The technician did his best and the phone began to work. Then I used the phone once ( for 24 hours) and the same problem came back. I tried to flash it with official Rom lollipop 5.0, bootloader and CWM by Odin v3.09, but that was in vain.
I need your help please.
Waiting for your reply.
Take it back to your technician .
Suggestion is a hardware problem .
JJEgan said:
Take it back to your technician .
Suggestion is a hardware problem .
Click to expand...
Click to collapse
I did it before trying by myself to fix the problem, but not solution. If it's a hardware problem, may be I have to try with another technician. Thanks.
This is exactly the same problem I am having.
My phone is now working on stock Lollipop but I was stuck with this for a while.
I found that if i flashed the CWM .tar file with Odin it would reboot and work fine.
Once you get to that point, download a stock rom from Sammobile - I used 4.4.2 just to get it working.
When i had installed 4.4.2 everything appeared fine, i went ahead and booted into stock recovery and did a full reset.
I then let the phone update to stock 5.0 using the built in updater.
Im running it as it is (stock rom, un-rooted and stock recovery) until i can research enough into the problem and how to get around it.
In Odin mode on my phone, there is a "write protection - enabled" line also, which im guessing is causing my problem on not being able to get cwm/twrp to work
My aim was to Root, custom recovery and custom Rom but I hit the exact brick wall you posted in the OP