Related
Hey all. I'm sure this gets asked quite a good bit but I am looking for some information on the Note 3 and it's current status of rom/root abilities. I have an S4 at the moment so I am fairly saavy with Samsung hardware and procedure at this point. I am going to assume that Verizon pushed out a locked boot thus killing everyone's ability to install roms and TWRP. If this is true, is there a specific build I should be looking for wen I go to get my phone? Also, what does the SafeStrap scene look like on this device? Is it relatively stable?
I apologize for not looking more but I am at work and then immediately going to pickup my girlfriend and head over to get my phone. Any and all responses would be greatly appreciated.
I bought my Note 3 about a week ago and it came with the latest firmware. I was able to very easy root with Kingo and install safestrap which is very much stable BTW.
Sent from my HTCONE using Tapatalk
After you install safestrap be sure to flash chainfires supersu 1.85 in recovery to rid the kingo Supersu app that kingo puts on your phone. Enjoy that Note 3 bro
good luck!
It will most likely come with the MJE firmware which is the latest. Root with Kingo and then flash chainfires SU and install Safestrap. There is a ton of write ups on the forums about the procedure. I came to the Note 3 from the S4 as well and it's all very similar.
mexiking713 said:
I bought my Note 3 about a week ago and it came with the latest firmware. I was able to very easy root with Kingo and install safestrap which is very much stable BTW.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
My exact scenario as well, my Note 3 came with THe latest firmware right before MJE, I forget, but regardless neither version could be rooted with Root De La Vega. I used Kingo, my knox is still 00x00 and I have safestrap installed and running the Hyperdrive ROM. If you are worried about the superuser app that kingo installs you will probably be prompted to update it anyway which will replace it with the play store version. I'm not sure why you'd be concerned, but I've seen some chatter about replacing the superuser app.
MR H3LLMAN said:
Hey all. I'm sure this gets asked quite a good bit but I am looking for some information on the Note 3 and it's current status of rom/root abilities. I have an S4 at the moment so I am fairly saavy with Samsung hardware and procedure at this point. I am going to assume that Verizon pushed out a locked boot thus killing everyone's ability to install roms and TWRP. If this is true, is there a specific build I should be looking for wen I go to get my phone? Also, what does the SafeStrap scene look like on this device? Is it relatively stable?
I apologize for not looking more but I am at work and then immediately going to pickup my girlfriend and head over to get my phone. Any and all responses would be greatly appreciated.
Click to expand...
Click to collapse
I have an all incusive thread for start to finish rooting of the N3 in my sig. You can read through it and see the steps. If you get a Note 3 you WON'T be disappointed!
Safestrapp has bypassed the locked bootloader and offers the added awesomeness of being able to boot directly into different roms just waiting to be used. Ingenious and very easy.
Take the N3 plunge, you won't be sorry
Hello,
Just to say at first, I like the people here at XDA and the developers, my Capitivate lasted and sadly my NAND failed yesterday for my S3. My S3 got softbricked and Odin says NAND Write failed all versions... :crying: Trying to revive it but anyways..
I just purchased the AT&T 1337 yesterday, and I noticed many forums about the UCUFNB1, not too happy what I am seeing. Is there a possible root for this version yet? Or is it still in development? I haven't done custom ROM's before, I just stick with stock and just want root accessibility. I have many apps from my S3 that I had backed up with Titanium Backup, but finding that the latest version of kitkat is an issue bums me out.
If there is any help or something of a source, can you point me to the direction? And any input on this stock rom or going to a custom would be great.
Thank you
I am at work, but wanted to point you--
look in general and/or q&a for nb1/mk2 threads
you will need to go back to mk2 to root, nb1 doesn't have it yet
will need to use safestrap 3.71?
no custom recoveries, no custom kernels
Start here http://forum.xda-developers.com/showthread.php?p=49562527
Sent from my Nexus 5
Thanks
Thanks rug and JD, that is very helpful. However I am at work too, I'll wait to try after my class tonight. Plus I saw something about the SIM Unlocking on MK2, that would be useful for going overseas. Also, i see many things about the wifi not working on MK2 is that because of the rom?
not sure on the wifi--i have an early phone and not restricted--jd will know--:good:
Takimaru85 said:
Thanks rug and JD, that is very helpful. However I am at work too, I'll wait to try after my class tonight. Plus I saw something about the SIM Unlocking on MK2, that would be useful for going overseas. Also, i see many things about the wifi not working on MK2 is that because of the rom?
Click to expand...
Click to collapse
Read page 66 of this http://forum.xda-developers.com/showthread.php?p=51319995 see Dave5777's response
Sent from my Nexus 5
I just got myself a Verizon Note 3. This is one power house of a phone. I noticed the kid I got it from does have it rooted. The only annoyance I see is allot of stuff is showing in the status bar with Chinese writing. is this normal or did he use some dumb way to root it? Also it still has 4.3 on it. I tried to update it but I get the message that "software update is currently unavailable". Is this because the Note is rooted?
I have done some searching and I did get the files for flashing it back to stock. Odin, .mkz, and the Samsung drivers. So if this update message is because it's rooted, I do have the stuff to flash it back to stock. I do also know how to use Odin as it's the same program for flashing the Note 1, which I did have. But any insight you guys can give me would be great. Thanks
cougar214 said:
I just got myself a Verizon Note 3. This is one power house of a phone. I noticed the kid I got it from does have it rooted. The only annoyance I see is allot of stuff is showing in the status bar with Chinese writing. is this normal or did he use some dumb way to root it? Also it still has 4.3 on it. I tried to update it but I get the message that "software update is currently unavailable". Is this because the Note is rooted?
I have done some searching and I did get the files for flashing it back to stock. Odin, .mkz, and the Samsung drivers. So if this update message is because it's rooted, I do have the stuff to flash it back to stock. I do also know how to use Odin as it's the same program for flashing the Note 1, which I did have. But any insight you guys can give me would be great. Thanks
Click to expand...
Click to collapse
Check out this post of mine. It will point you in all the right directions : http://forum.xda-developers.com/showpost.php?p=55003142&postcount=3
Since you're on MJE 4.3 see this thread and go to post 2 NC2/MJE instructions...http://forum.xda-developers.com/showthread.php?t=2787627
Thanks for the info gamer but I'm not looking to root or flash roms. with this phone. At least not yet anyway. It's new to me so I really need to be as familiar with it as possible before I go flashing roms and tweaks and such. I'm not familiar with the names MJE, NC2, NC4 etc. so trying to explain that to me is just like speaking German to me right now. All I want to do for the here and now is get it back to stock un rooted 4.3, take the update to 4.4.2, and then check on the need for root then.
I also will need to look into what's safe to flash, what needs to be run, app wise, in order to flash some things. Take for instance my last phone, lg optimus g pro, you needed an app called freegee to get past the bootloader. If you screwed that up, you bricked yer phone. I'm sure some of the processes for this phone are similar in that respect. So no fiddling for me just yet. So in short, could you just tell me in simple terms if I have the correct stuff to flash it back to stock?
I currently have the latest Samsung drivers, Odin 3 V3.0.9, and the tar file named "ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5.7z"
Is this what is needed to flash it to stock 4.3? Also, if you don't mind, could you tell me if there is ANY way, a modem flash perhaps, to get my LTE working with this AT&T Straight Talk sim card? Currently I am getting H+ which isn't bad but it's no LTE. Thanks a bunch.
EDIT: Well, that was easy. My computer ran the Verizon software and it failed to update it so it did the repair and repaired it with kitkat. So one issue solved. Now If I can just get LTE working on here it would be great....lol
cougar214 said:
Thanks for the info gamer but I'm not looking to root or flash roms. with this phone. At least not yet anyway. It's new to me so I really need to be as familiar with it as possible before I go flashing roms and tweaks and such. I'm not familiar with the names MJE, NC2, NC4 etc. so trying to explain that to me is just like speaking German to me right now. All I want to do for the here and now is get it back to stock un rooted 4.3, take the update to 4.4.2, and then check on the need for root then.
I also will need to look into what's safe to flash, what needs to be run, app wise, in order to flash some things. Take for instance my last phone, lg optimus g pro, you needed an app called freegee to get past the bootloader. If you screwed that up, you bricked yer phone. I'm sure some of the processes for this phone are similar in that respect. So no fiddling for me just yet. So in short, could you just tell me in simple terms if I have the correct stuff to flash it back to stock?
I currently have the latest Samsung drivers, Odin 3 V3.0.9, and the tar file named "ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5.7z"
Is this what is needed to flash it to stock 4.3? Also, if you don't mind, could you tell me if there is ANY way, a modem flash perhaps, to get my LTE working with this AT&T Straight Talk sim card? Currently I am getting H+ which isn't bad but it's no LTE. Thanks a bunch.
EDIT: Well, that was easy. My computer ran the Verizon software and it failed to update it so it did the repair and repaired it with kitkat. So one issue solved. Now If I can just get LTE working on here it would be great....lol
Click to expand...
Click to collapse
You can flash different modems in Odin but I don't know if they'll get you running on AT&T Straight Talk, someone else will have to chime in on that.
Att straight talk might work if you have the correct apn settings but you will not get 4g
Sent from my SM-N900V using XDA Premium 4 mobile app
Yeah I am finding this out Roger. I want to root and enable the hidden menu. I am seeing posts about doing this and getting the 4g LTE working. The problem is most of these posts pertain to the T-Mobile branded note 3.
Hey guys... Before I get into this, I would like to say that i'm very new to this whole rooting thing, so please forgive me for my lack of knowledge on various terms and such, and I'm a first time user here at xda.
What's written below might get a little bit complicated so i will try to make it as detailed as possible. Please bare with me here.
So I have a Samsung Galaxy S4 sgh-i337 (AT&T) running on android 4.4.4 (with touchwiz, you guys know the deal). I really wanted stock android lollipop, because I really like the look and feel to it. When I decided to root the phone, I went through many tutorials and I tried many different methods, and none of them worked. The phone still worked fine, but SuperSU was not installed and Root Checker said the phone was not rooted. After scouring the internet, I found one tutorial that had my S4 type and the same version. At that point I realized that my android version was hindering my rooting process. The tutorial used Odin to flash a kernel (NC1), root the phone using towelroot, install SuperSU, (Root Checker too to check if it worked), and then flashing the original kernel again (my original kernel was NJ4). After following this process, my phone was rooted, and everything worked fine.
As I said before, I wanted a GPE ROM, and so I needed a custom recovery. I decided to install CWM, since most GPE ROMs used this specific recovery. Again, I followed many different tutorials, and after each and every one, I would try to go into Recovery mode, and it would just launch the stock recovery. I found another tutorial on another website that involved flashing the recovery from an app in the google play store, so I decided to try it out. I now regret this as it led to more problems. I followed these instructions, and when launching into recovery mode from that point on, I get the yellow triangle with the error message "System software is not authorized by AT&T"
Sure, I could get around it by going into download mode from there, canceling, and it would reboot like normal, and the phone still worked, but I needed to get ride of that error message.
Once again doing my research, I figured out that if I flash a stock firmware specific to my phone, it will reset the phone (the only stock firmware available has android version 4.2.2, which is a really popular version, and is compatible with most custom recoveries and ROMs, so I decided to flash the firmware, as it would also change the version back, right?) When I flashed it using Odin like the directions said, it failed. i then figured out that it failed because my binary counter is not 0. I looked into resetting the binary counter for the AT&T S4, and I found Triangle Away. However, in order to reset your binary counter, you need an unlocked bootloader, and the AT&T S4 (sgh-i337) has a locked bootloader (I don't want to use Triangle Away if it's going to brick my phone, i'd rather unroot and keep touchwiz than brick). In the process of finding this out, I also figured out that the only custom recovery that you could use on a locked bootloader S4 sgh-i337 is SafeStrap. But i heard when using SafeStrap you are limited as far as ROMs go? Would I be able to get a GPE 5.0 Lollipop ROM with SafeStrap? Cause if not I might just unroot using SuperSU and software update my phone (will that fix the error when trying to get to Recovery mode?) Also, if I install Safestrap, will it fix the error message?
Again, sorry for my inexperience in all of this, and thanks for staying with me here. Any help and additional information on what I should do (or any GPE Lollipop ROMs I should use that are compatible with my phone and version and such), as well as any links to tutorials are greatly appreciated (also, keep in mind that all of the vocab I know when rooting is used in this post, I am not aware of most other terms - again, forgive me).
You wrote a lot but I'm not sure what state your device is in right now and what you want to do. But as you've found out, safestrap is the only custom recovery you can use. And touch wiz based roms are the only ones you can use. Afaik there are no 5.0 custom roms you can use at this time.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
You wrote a lot but I'm not sure what state your device is in right now and what you want to do. But as you've found out, safestrap is the only custom recovery you can use. And touch wiz based roms are the only ones you can use. Afaik there are no 5.0 custom roms you can use at this time.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Oh, thanks for the help! The phone currently works fine, and it is rooted, but when I go into Recovery Mode it gives me the yellow triangle with the error... Will installing SafeStrap fix that? Regardless, thanks for the help, really do appreciate it!
jd1639 said:
You wrote a lot but I'm not sure what state your device is in right now and what you want to do. But as you've found out, safestrap is the only custom recovery you can use. And touch wiz based roms are the only ones you can use. Afaik there are no 5.0 custom roms you can use at this time.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Also, if i were to update the phone to the next version (i heard there is a way to bump the S4 up in android version) would that reset the error in Recovery Mode? And I also heard that with SafeStrap, you are limited to ROMs on the same android version as the one on your phone? I really like 5.0, but if it's not possible to get it as the moment (and I haven't found any 5.0 ROMs for the sgh-i337 yet - you were right) i might just unroot using SuperSU and just update my version, unrooted and all. I'd rather have my phone be nice and clean than to have root on it with a corrupted recovery mode, and not make use of the root at all (I've seen other ROMs and I prefer 5.0). I might just try to make the phone feel as close to stock as possible by using more google apps and such (keyboard, messages, etc.). Regardless, thanks for the help and additional input, really do appreciate it!
EvilLemon said:
Also, if i were to update the phone to the next version (i heard there is a way to bump the S4 up in android version) would that reset the error in Recovery Mode? And I also heard that with SafeStrap, you are limited to ROMs on the same android version as the one on your phone? I really like 5.0, but if it's not possible to get it as the moment (and I haven't found any 5.0 ROMs for the sgh-i337 yet - you were right) i might just unroot using SuperSU and just update my version, unrooted and all. I'd rather have my phone be nice and clean than to have root on it with a corrupted recovery mode, and not make use of the root at all (I've seen other ROMs and I prefer 5.0). I might just try to make the phone feel as close to stock as possible by using more google apps and such (keyboard, messages, etc.). Regardless, thanks for the help and additional input, really do appreciate it!
Click to expand...
Click to collapse
I would recommend you flash the nb1 tar file in Odin. That'll bring your device to like new. Then you can let it ota nj4. There are root methods for nc1 and nj4. See this
http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
I would recommend you flash the nb1 tar file in Odin. That'll bring your device to like new. Then you can let it ota nj4. There are root methods for nc1 and nj4. See this
http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks so much! I followed the instructions and now my phone is back to normal, Recovery mode and all! Really do appreciate it, thanks!
EvilLemon said:
Thanks so much! I followed the instructions and now my phone is back to normal, Recovery mode and all! Really do appreciate it, thanks!
Click to expand...
Click to collapse
No problem. I'm glad you got it working again
Sent from my Nexus 9 using XDA Free mobile app
I have a verizon note 3 I ordered from insurance when my last note 3 finally bit the dust. My previous phone was running jasmine and stock using safestrap. I strove to do the samewith this phone. Instead, when attempting to use towelroot, it said my phone was no longer supported. I tried to find a viable nc2 and couldn't for the last week. Most links on this website are dead because note 3 is hardly supported anymore. I finally found one, one developed by hrsbad or one someone claimed was, the custom note 3 nc2. When I flashed it using odin, i get an error that pops up with Samsung splash screen, "kernel is not seaandroid enforcing" It then takes me to a yellow exlaimation point with "system software not authorized by verizon wireless has been found on your phone. Please turn off your phone and go to the nearest verizon wireless store for help. Is there anything i can do? Im sure there's a wiz out there who knows an easier solution.
I would appreciate your help very greatly, and if you could explain to me why i couldnt; use safestrap and even suggest how i could root an alternate way that would be super amazing. Thanks for any help you might be able to lend.
I have attemtped to flash all the nc2 and nc4 finally succeeding with one that had previously failed. The kernel error no longer appears and my phone is behaving normally. I have 4.4.4 and would like to root it, are there any options anyone knows of? Towelroot does not support my version, Im open to any suggestions. Thanks in advance.
try one of these imgs http://forum.xda-developers.com/showthread.php?t=2524572
vzwnexus said:
try one of these imgs http://forum.xda-developers.com/showthread.php?t=2524572
Click to expand...
Click to collapse
EDIT: Thanks for your reply again, but I was wrong. I didn't try any of these because all the links I'd be interested in are no longer being served. Is there anywhere else I can get this at, or anything else I can do. Thank you again I really appreciate it.
thanks for your reply. did try the nc2 in AP spot of odin and it bricked my phone temporarily. Did I use the wrong one? or should I have used multiples of those to do it properly?
do you remember what firmware you were running before going full root? you'll want to get that img to flash. maybe nc4?
vzwnexus said:
do you remember what firmware you were running before going full root? you'll want to get that img to flash. maybe nc4?
Click to expand...
Click to collapse
I have put nc4 back on. This is how the phone was shipped. But I was unable to root with towelroot, I am still without root. And that is the crux ofmy questions now, is where can I get nc2 so I can use towelroot, or is there a better method than that?
what I have tried
nc2kernel.tar.md5
VZW-N900VVRUCNC4-20140512165349
n900v_kk_firmware.tar.md5
It has been very difficult finding these files online, sammobile is where I got one of them, the other two were from a hsrbad post, a comment from "Dutchboy" who still hosted these files lead me to them.
it's hard to say if those work, what I'm trying to determine is the original firmware your phone was running before all of this. I'm not super good at this just fyi.. haha. i usually look for the modem and firmware for the "original" firmware from before rooting.
vzwnexus said:
it's hard to say if those work, what I'm trying to determine is the original firmware your phone was running before all of this. I'm not super good at this just fyi.. haha. i usually look for the modem and firmware for the "original" firmware from before rooting.
Click to expand...
Click to collapse
Sorry for the late response. School and work are kicking my butt. The original is hard to say, I attempted like five different roms after noticing that mine could not be towelrooted. all of these romsfailed, and one finally raised an exception with the security that temporarily soft bricked my phone, I found a nc4 on sammbile that was able to remedy that, but I'd like most of all to get this rooted and safestrapped again so i can dualboot as i had previously. I'm also pretty novice but i enjoy the attempting to do this stuff, even when it ends in me bricking my phone for the day :good:
so have you been able to get your phone running?
deindichter said:
Sorry for the late response. School and work are kicking my butt. The original is hard to say, I attempted like five different roms after noticing that mine could not be towelrooted. all of these romsfailed, and one finally raised an exception with the security that temporarily soft bricked my phone, I found a nc4 on sammbile that was able to remedy that, but I'd like most of all to get this rooted and safestrapped again so i can dualboot as i had previously. I'm also pretty novice but i enjoy the attempting to do this stuff, even when it ends in me bricking my phone for the day :good:
Click to expand...
Click to collapse
Towelroot was supposed to work on NC4.
You can not flash any ROM lower than NC4 due to bootloader. There is also supposedly a rooted NC4 here that you can flash...but towelroot should work.
Sent from my Note 3 via Tapatalk
donc113 said:
Towelroot was supposed to work on NC4.
You can not flash any ROM lower than NC4 due to bootloader. There is also supposedly a rooted NC4 here that you can flash...but towelroot should work.
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
Thank you both for your replies.
Towelroot had previously worked , this is an insurance replacement as mine bit the dust. I went to towelroot and to my great sadness does not work. I am using:
4.4.4
sm-n900v
n900vvrudnj6
kernel 3.4.0
Truly I'm novice so Im not positive if any of this can help or not, but do you know of a way I can towelroot?
deindichter said:
Thank you both for your replies.
Towelroot had previously worked , this is an insurance replacement as mine bit the dust. I went to towelroot and to my great sadness does not work. I am using:
4.4.4
sm-n900v
n900vvrudnj6
kernel 3.4.0
Truly I'm novice so Im not positive if any of this can help or not, but do you know of a way I can towelroot?
Click to expand...
Click to collapse
Nothing works on 4.4.4 or higher....sorry
Sent from my Note 3 via Tapatalk
thank you.
My phone is rebricked, does anyone know where you can get files to revert back to stock?
They're all here...... well most of then back to 4.3
sammobile.com/firmwares/database/SM-N900V/