Hey guys... Before I get into this, I would like to say that i'm very new to this whole rooting thing, so please forgive me for my lack of knowledge on various terms and such, and I'm a first time user here at xda.
What's written below might get a little bit complicated so i will try to make it as detailed as possible. Please bare with me here.
So I have a Samsung Galaxy S4 sgh-i337 (AT&T) running on android 4.4.4 (with touchwiz, you guys know the deal). I really wanted stock android lollipop, because I really like the look and feel to it. When I decided to root the phone, I went through many tutorials and I tried many different methods, and none of them worked. The phone still worked fine, but SuperSU was not installed and Root Checker said the phone was not rooted. After scouring the internet, I found one tutorial that had my S4 type and the same version. At that point I realized that my android version was hindering my rooting process. The tutorial used Odin to flash a kernel (NC1), root the phone using towelroot, install SuperSU, (Root Checker too to check if it worked), and then flashing the original kernel again (my original kernel was NJ4). After following this process, my phone was rooted, and everything worked fine.
As I said before, I wanted a GPE ROM, and so I needed a custom recovery. I decided to install CWM, since most GPE ROMs used this specific recovery. Again, I followed many different tutorials, and after each and every one, I would try to go into Recovery mode, and it would just launch the stock recovery. I found another tutorial on another website that involved flashing the recovery from an app in the google play store, so I decided to try it out. I now regret this as it led to more problems. I followed these instructions, and when launching into recovery mode from that point on, I get the yellow triangle with the error message "System software is not authorized by AT&T"
Sure, I could get around it by going into download mode from there, canceling, and it would reboot like normal, and the phone still worked, but I needed to get ride of that error message.
Once again doing my research, I figured out that if I flash a stock firmware specific to my phone, it will reset the phone (the only stock firmware available has android version 4.2.2, which is a really popular version, and is compatible with most custom recoveries and ROMs, so I decided to flash the firmware, as it would also change the version back, right?) When I flashed it using Odin like the directions said, it failed. i then figured out that it failed because my binary counter is not 0. I looked into resetting the binary counter for the AT&T S4, and I found Triangle Away. However, in order to reset your binary counter, you need an unlocked bootloader, and the AT&T S4 (sgh-i337) has a locked bootloader (I don't want to use Triangle Away if it's going to brick my phone, i'd rather unroot and keep touchwiz than brick). In the process of finding this out, I also figured out that the only custom recovery that you could use on a locked bootloader S4 sgh-i337 is SafeStrap. But i heard when using SafeStrap you are limited as far as ROMs go? Would I be able to get a GPE 5.0 Lollipop ROM with SafeStrap? Cause if not I might just unroot using SuperSU and software update my phone (will that fix the error when trying to get to Recovery mode?) Also, if I install Safestrap, will it fix the error message?
Again, sorry for my inexperience in all of this, and thanks for staying with me here. Any help and additional information on what I should do (or any GPE Lollipop ROMs I should use that are compatible with my phone and version and such), as well as any links to tutorials are greatly appreciated (also, keep in mind that all of the vocab I know when rooting is used in this post, I am not aware of most other terms - again, forgive me).
You wrote a lot but I'm not sure what state your device is in right now and what you want to do. But as you've found out, safestrap is the only custom recovery you can use. And touch wiz based roms are the only ones you can use. Afaik there are no 5.0 custom roms you can use at this time.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
You wrote a lot but I'm not sure what state your device is in right now and what you want to do. But as you've found out, safestrap is the only custom recovery you can use. And touch wiz based roms are the only ones you can use. Afaik there are no 5.0 custom roms you can use at this time.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Oh, thanks for the help! The phone currently works fine, and it is rooted, but when I go into Recovery Mode it gives me the yellow triangle with the error... Will installing SafeStrap fix that? Regardless, thanks for the help, really do appreciate it!
jd1639 said:
You wrote a lot but I'm not sure what state your device is in right now and what you want to do. But as you've found out, safestrap is the only custom recovery you can use. And touch wiz based roms are the only ones you can use. Afaik there are no 5.0 custom roms you can use at this time.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Also, if i were to update the phone to the next version (i heard there is a way to bump the S4 up in android version) would that reset the error in Recovery Mode? And I also heard that with SafeStrap, you are limited to ROMs on the same android version as the one on your phone? I really like 5.0, but if it's not possible to get it as the moment (and I haven't found any 5.0 ROMs for the sgh-i337 yet - you were right) i might just unroot using SuperSU and just update my version, unrooted and all. I'd rather have my phone be nice and clean than to have root on it with a corrupted recovery mode, and not make use of the root at all (I've seen other ROMs and I prefer 5.0). I might just try to make the phone feel as close to stock as possible by using more google apps and such (keyboard, messages, etc.). Regardless, thanks for the help and additional input, really do appreciate it!
EvilLemon said:
Also, if i were to update the phone to the next version (i heard there is a way to bump the S4 up in android version) would that reset the error in Recovery Mode? And I also heard that with SafeStrap, you are limited to ROMs on the same android version as the one on your phone? I really like 5.0, but if it's not possible to get it as the moment (and I haven't found any 5.0 ROMs for the sgh-i337 yet - you were right) i might just unroot using SuperSU and just update my version, unrooted and all. I'd rather have my phone be nice and clean than to have root on it with a corrupted recovery mode, and not make use of the root at all (I've seen other ROMs and I prefer 5.0). I might just try to make the phone feel as close to stock as possible by using more google apps and such (keyboard, messages, etc.). Regardless, thanks for the help and additional input, really do appreciate it!
Click to expand...
Click to collapse
I would recommend you flash the nb1 tar file in Odin. That'll bring your device to like new. Then you can let it ota nj4. There are root methods for nc1 and nj4. See this
http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
I would recommend you flash the nb1 tar file in Odin. That'll bring your device to like new. Then you can let it ota nj4. There are root methods for nc1 and nj4. See this
http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks so much! I followed the instructions and now my phone is back to normal, Recovery mode and all! Really do appreciate it, thanks!
EvilLemon said:
Thanks so much! I followed the instructions and now my phone is back to normal, Recovery mode and all! Really do appreciate it, thanks!
Click to expand...
Click to collapse
No problem. I'm glad you got it working again
Sent from my Nexus 9 using XDA Free mobile app
Related
Ok so I got my AT&T S4 successfully rooted using the guide I found on here that uses the Motochopper tool. Root Checker verified I am indeed rooted. But that's it. I'm only rooted to the stock ROM. Nothing custom. Now how to I go about getting a CWM recovery thing on my phone, while still maintaining the stock ROM?
Sent from my Galaxy Nexus using Tapatalk 4 Beta
On the play store, download goo manager (for twrp) or rom manager (for cwm) to install a custom recovery. Don't use either app to do anything but just install the recovery. Once it's installed, boot into recovery and make a backup, even if you're planning on staying stock. Cheers
Step 1. Go to the development forum and read about how to do it.
Step 2. Know how to do it.
Step 3. Do it.
I need more basic. I mean I know CWM means ClockWorkMod, but I don't know what that means. I also know that CWM is more popular than TWRP (I don't know what TWRP stands for) because the rom manager app has tons more downloads in the play store than the goo one does. What is a recovery mode and why do you need one? I mean if I screw up I can just use Odin to flash the AT&T stock ROM back. I wish someone would post a link to a ROMS for Dummies page.
Sent from my Galaxy Nexus using Tapatalk 4 Beta
If I were you I'd be happy that your rooted and now find out what that means to you and what you want to do with a rooted phone. You don't need a custom recovery if all you're interested in is being rooted. And if you mess up, Odin back to stock may not be an option. You may permanently hard brick your phone. So really decide what you want to do with the phone before you proceed any further.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
feetr2c said:
I need more basic. I mean I know CWM means ClockWorkMod, but I don't know what that means. I also know that CWM is more popular than TWRP (I don't know what TWRP stands for) because the rom manager app has tons more downloads in the play store than the goo one does. What is a recovery mode and why do you need one? I mean if I screw up I can just use Odin to flash the AT&T stock ROM back. I wish someone would post a link to a ROMS for Dummies page.
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Click to expand...
Click to collapse
you really should have read and understood this first: http://forum.xda-developers.com/showthread.php?t=2301762
These guys are correct and trying to help you avoid a brick. If you are not aware of the basics start reading. Even if you are experienced at flashing on another device.
I had extensive experience on HTC phones and feel like a noob here, but getting better. But I have read over a thousand posts, at least, and dozens of how to videos since early may. And only feel comfortable now to flash a custom rom. Not ready yet as phone stock is pretty good for me atm. And would prefer an unlocked bootloader first. I only rooted and flashed a recovery about a week ago. May be a little slower than some, but never got into a problem I couldn't get out of on my HTC phones using the same learning process.
If you come back with specific questions where they know you have researched things they will gladly help. Googling some of the terminology is a good idea too. Had to do that when I first started flashing roms. A different language for sure.
Good luck and enjoy the phone and the rooted world.
In my experience with the S4 CWM does not work as well as TWRP. I had many issues installing a few custom ROMS with CWM, but as soon as i loaded TWRP those ROMS which wouldn't install would install properly. TWRP also was able to read my ext SD when it was formatted in exFat.
Thanks in advance to anyone who can help. I am new to this custom ROM stuff and am trying my best to follow all the guides, but I have no idea what I'm doing wrong.
I have a Samsung Galaxy S4. Android version 4.4.2 and Build version KOT49H.I337UCUFNC1, so I've been following the NC1 guides. I was able to successfully root using towelroot and verified that it worked using a root checker app. I then installed SafeStrap, backed up my stock image, and put two different custom ROMs on my external microSD card, Graviton (http://forum.xda-developers.com/showthread.php?t=2372742) and PurifieD (http://forum.xda-developers.com/showthread.php?t=2454205). After creating another ROM slot, and performing a factory wipe using SafeStrap, I installed Graviton and it went through and told me to reboot. However, when the phone loaded again, it looked just like the stock ROM again. So I wiped everything again and did the same with PurifieD. It gave me all the installation options of what bloatware I wanna get rid of, etc and also seemed to install successfully. But once again, when I rebooted after installation, it looked just like stock again.
Am i doing something wrong? I really want to use these nice looking ROMs!!
And if I can get that to work, it seems like I have no 4G connection, even though WiFi works. I'm assuming http://forum.xda-developers.com/showpost.php?p=50965837 is the guide I will want to be looking at to make it work?
Thanks for the help
I assume they are based on GNG8 AND GNG1 and you are running FNC1.
The rom based on stockrom is important too.
I suppose you downloaded Purified HD's v3.3? Because it is based on FNC1.
Try roms made specifically for your device to avoid problems and bricking. Experimenting without knowledge is also not supported here. Plus people are not responsible here for bricked devices or any weird thing that happens.
Towelroot worked for your phone as it is a universal app, made for S5 by the great @geohot, but works for many devices.
EDIT : Well I totally missed the i337 part. Thank you @Lennyz1988.
Sent from my Ozcan GT-i9500 using XDA mobile app
You need to read more carefully.
You have a I337 model. NOT an I9505 or an I9500. You can't flash other roms to your device. Stick to your model only the AT&T. Try what DeepankarS tells you.From what I remember your stock rom needs to be the same as the rom you are trying to flash.
Thanks for the assistance fellas. And yeah, knowing that I was looking in the wrong threads would have been a better start and I'm lucky I didn't permanently damage my phone. Thanks again for the heads up.
eeric248 said:
Thanks for the assistance fellas. And yeah, knowing that I was looking in the wrong threads would have been a better start and I'm lucky I didn't permanently damage my phone. Thanks again for the heads up.
Click to expand...
Click to collapse
Anytime. But you can always port roms to your phone. There are a lot many ways to port a rom for your phone
*A bit of perfect copy paste skills required for that
Sent from my GT-I9500 using XDA Free mobile app
Hey guys,
I ran a search but I don't understand half the things people are writing. I would greatly appreciate it if someone could please explain to me my options. In layman's terms, as I do not understand half the abbreviations and jargons here.
I rooted my phone over a year ago and really don't remember much about the process. I can't download important apps from Google Play anymore as they require newer versions than 4.2.2... So I'm stuck on this old version and need to update ASAP.
I have ONLY rooted the phone. I haven't done any mods or installed any ROMS. It's on stock AT&T Rom. (sometimes I wonder why I even bothered in the first place).
Can someone please point me in the right direction, I want a regular STOCK AT&T newest version, whether it stays rooted or not that's fine, but a newer version, KitKat preferably. What are my options? The simplest method would help me the most.
Things I really need backed up: My Text Messages, Voicemail, Call Logs, Whatsapp Messages etc. What is the best way to back that up? If I use Titanium Backup, and I don't have root after I update, Titanium Backup would be obsolete. So what would my other option?
Please help.
Much appreciated,
Are you sure you want to update from 4.2.2. You probably have the option to flash custom roms on your phone. There are many custom roms that that'll put 4.4.4 on your phone. Since you're rooted get terminal emulator from the play store. In it type
getprop ro.bootloader
If the last three characters are mdb or mdl you have a lot of options. I can help walk you through on how to get a custom rom on your phone.
You can update your firmware and bootloader to 4.4.4 too but you'll lose the option to flash most custom roms.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Are you sure you want to update from 4.2.2. You probably have the option to flash custom roms on your phone. There are many custom roms that that'll put 4.4.4 on your phone. Since you're rooted get terminal emulator from the play store. In it type
getprop ro.bootloader
If the last three characters are mdb or mdl you have a lot of options. I can help walk you through on how to get a custom rom on your phone.
You can update your firmware and bootloader to 4.4.4 too but you'll lose the option to flash most custom roms.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks bud,
I got I337UCUAMF3
I'll be honest, I haven't really messed with any custom ROMS before. I just use the stock AT&T one. But I would like to upgrade to KitKat so my phone is faster and can download / upgrade the latest Apps. Lollipop isn't out for the AT&T Samsung S4 right?
Kepela523 said:
Thanks bud,
I got I337UCUAMF3
I'll be honest, I haven't really messed with any custom ROMS before. I just use the stock AT&T one. But I would like to upgrade to KitKat so my phone is faster and can download / upgrade the latest Apps. Lollipop isn't out for the AT&T Samsung S4 right?
Click to expand...
Click to collapse
Will the phone Not download the latest 4.4.4 from the phone settings?? Settings/More/About Device/Software Update. It must be connected to WiFi to download!!! Or you can get the AT&T S4 i337 to Stock 4.4.4 NJ4 Kit Kat Scroll down this page, easy to do. http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
tailgunner9 said:
Will the phone Not download the latest 4.4.4 from the phone settings?? Settings/More/About Device/Software Update. It must be connected to WiFi to download!!!
Click to expand...
Click to collapse
No. My phone is rooted... Is it supposed to download to 4.4? And also couldn't there be issues with that?
I found this post. So I know this is ONE option: But I'll lose my Root. Which is fine if that's my only option.
http://forum.xda-developers.com/showthread.php?t=2728462
As the OP says, I will lose ROOT. So my question would be, If I back up using Titanium Backup, how can I restore my backup if Titanium Backup works only on ROOT? This is very important.
@ jd1639 - He had mentioned there were several other options, so I will wait to hear them, and I can make a decision from there. Otherwise, I may have to fork out another $150 - $200 Bucks on a Samsung Galaxy S5 or S6. depending which suits my needs.
Many thanks for the replies!
Kepela523 said:
I found this post. So I know this is ONE option: But I'll lose my Root. Which is fine if that's my only option.
http://forum.xda-developers.com/showthread.php?t=2728462
As the OP says, I will lose ROOT. So my question would be, If I back up using Titanium Backup, how can I restore my backup if Titanium Backup works only on ROOT? This is very important.
@ jd1639 - He had mentioned there were several other options, so I will wait to hear them, and I can make a decision from there. Otherwise, I may have to fork out another $150 - $200 Bucks on a Samsung Galaxy S5 or S6. depending which suits my needs.
Many thanks for the replies!
Click to expand...
Click to collapse
You're on mf3 bootloader which doesn't really allow you to flash any roms anyway. You'd have to use safestrap.
What I'd do is flash the nb1 tar file in Odin. That'll update you to 4.4 and the device should then ota update itself from there. You will lose root, you can root it again if you want. See this http://forum.xda-developers.com/showthread.php?p=50912149
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You're on mf3 bootloader which doesn't really allow you to flash any roms anyway. You'd have to use safestrap.
What I'd do is flash the nb1 tar file in Odin. That'll update you to 4.4 and the device should then ota update itself from there. You will lose root, you can root it again if you want. See this http://forum.xda-developers.com/showthread.php?p=50912149
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks JD, do you know if this wipes my phone? In other words, does it factory reset my phone?
Yes Flash the NB1 Stock file as he said. But you are going to loose Root and any pictures etc. stored on phone memory, so copy them to your PC or SD card. I always like to take SD card out just in case when I flash just in case it may erase it. But after you flash NB1 Stock or the Stock Root it is like a phone and have to set it up. Then it should Update to 4.4.4 itself from the settings/ Software update. Good luck. Any problem let us now.
Ah cheers,
Last question: Do you recommend the First or second option?
I337UCUFNB1_4.4_Stock_Odin_tar
I337UCUFNB1_4.4_Rootable_Stock_Odin_tar
Just a bit confusing as why he would post two separate links? I'm interpreting the first cannot be rooted ever.
Thanks again to the both of you for helping with this.
Kepela523 said:
Ah cheers,
Last question: Do you recommend the First or second option?
I337UCUFNB1_4.4_Stock_Odin_tar
I337UCUFNB1_4.4_Rootable_Stock_Odin_tar
Just a bit confusing as why he would post two separate links? I'm interpreting the first cannot be rooted ever.
Thanks again to the both of you for helping with this.
Click to expand...
Click to collapse
It's possible to root even the 4.4.4. It just gets a little trickier to do it and you have to flash modules in Odin. In the general forum see "all things at&t....." by guut13
Sent from my Nexus 5 using XDA Free mobile app
Kepela523 said:
Ah cheers,
Last question: Do you recommend the First or second option?
I337UCUFNB1_4.4_Stock_Odin_tar
I337UCUFNB1_4.4_Rootable_Stock_Odin_tar
Just a bit confusing as why he would post two separate links? I'm interpreting the first cannot be rooted ever.
Thanks again to the both of you for helping with this.
Click to expand...
Click to collapse
Yep I think you are correct. So if you want to root again use the Rootable to flash in Odin. Once you go from Jelly Bean to Kit Kat bootloaders are Locked for some .tar Same for Lollipop, they have not been able to root and unlock bootloader as yet. Just follow the steps and take your time and all will be good. Have done it several times on mine with Odin.
Hey guys, I just wanted to take the time and thank you both for the help. I finally updated today. After backing up all my data and making sure everything was safe to go. Bam! I did exactly as you suggested and had zero issues... I am now on 4.4.2
There were a couple hiccups along the way, but I figured them out without too much of a hassle.
Cheers again and best of luck to the both of you!
I've tried Paranoid Android 4.6 and CM 11, both with the same result.
I could not get any custom bootloader to install, aside from safestrap. This seems to be on there ok now, and I can install PA or CM roms from my sd card.
When they are finished installing though (along with Gapps), when it boots into the OS I instantly get the popup telling me the process com.android.phone has stopped. I hit ok and it comes back immediately, no matter how many times I hit it. I can't get into the menus or setup screens, the popup comes back instantly.
Since PA and CM both did this same thing, I am guessing my problem is perhaps not the rom. Any ideas please on what I might try next? The phone is basically bricked at this point.
Taymar said:
I've tried Paranoid Android 4.6 and CM 11, both with the same result.
I could not get any custom bootloader to install, aside from safestrap. This seems to be on there ok now, and I can install PA or CM roms from my sd card.
When they are finished installing though (along with Gapps), when it boots into the OS I instantly get the popup telling me the process com.android.phone has stopped. I hit ok and it comes back immediately, no matter how many times I hit it. I can't get into the menus or setup screens, the popup comes back instantly.
Since PA and CM both did this same thing, I am guessing my problem is perhaps not the rom. Any ideas please on what I might try next? The phone is basically bricked at this point.
Click to expand...
Click to collapse
Yea, you can't flash cm or pa on your device. They can only be flashed on devices with the mdb or mdl bootloader. If you're using safestrap, and it's the only recovery you can use, you're probably on 4.4.4, nb1 or nc1 or nj4, bootloader. You'll need tw based roms. See the ones that work with safestrap.
Sent from my Nexus 9 using XDA Free mobile app
Thank you,
I flashed to NJ4 after rooting. Could you recommend any custom rom that is tw based please, or am I basically limited to stock?
I tried flashing a new TW rom but now I'm stuck in a recovery mode bootloop (safestrap seems to be gone).
edit: tw = touchwiz? (Sorry, I'm new at this).
Really appreciate the explanation, thanks again.
Taymar said:
Thank you,
I flashed to NJ4 after rooting. Could you recommend any custom rom that is tw based please, or am I basically limited to stock?
I tried flashing a new TW rom but now I'm stuck in a recovery mode bootloop (safestrap seems to be gone).
edit: tw = touchwiz? (Sorry, I'm new at this).
Really appreciate the explanation, thanks again.
Click to expand...
Click to collapse
Your stuck to 4.4.4 unless you do the method mentioned on the forums and GoldenEye comments.
But a caution its not for the new, is risky and you lose the safestrap recovery boot because safestrap is not lollipop compatible right now.
Got it. Thank you.
I finally found a 'stock' firmware that I managed to load via Odin. Looks like AT&T just pushed the lollopop update to my phone as well so I guess stock lollipop will work for me until I upgrade my phone.
Out of interest, I'm looking at the oneplus one phone. Am I correct in thinking I should have way less problems trying to root & install custom roms on that, since it comes loaded with CM and the carrier isn't going to be constantly fixing exploits that allow root?
Really appreciate the help guys, thanks again.
Taymar said:
Got it. Thank you.
I finally found a 'stock' firmware that I managed to load via Odin. Looks like AT&T just pushed the lollopop update to my phone as well so I guess stock lollipop will work for me until I upgrade my phone.
Out of interest, I'm looking at the oneplus one phone. Am I correct in thinking I should have way less problems trying to root & install custom roms on that, since it comes loaded with CM and the carrier isn't going to be constantly fixing exploits that allow root?
Really appreciate the help guys, thanks again.
Click to expand...
Click to collapse
I don't own it so I couldn't tell you but I would look up the forum for it before hand and see what they say about it.
If it's not an ATT and Verizon phone most likely it's not boot loader locked.
Taymar said:
Got it. Thank you.
I finally found a 'stock' firmware that I managed to load via Odin. Looks like AT&T just pushed the lollopop update to my phone as well so I guess stock lollipop will work for me until I upgrade my phone.
Out of interest, I'm looking at the oneplus one phone. Am I correct in thinking I should have way less problems trying to root & install custom roms on that, since it comes loaded with CM and the carrier isn't going to be constantly fixing exploits that allow root?
Really appreciate the help guys, thanks again.
Click to expand...
Click to collapse
Oneplus you will be able to root and recovery, I believe even unlock the bootloader. You just have to pay full price of the phone of course, but it's separate from carrier so no root patching OTAs.
Awesome. Thank you so much guys. I think I'm going to try out the oneplus one. Sounds like it'll be a lot more straightforward than with AT&T's devices.
Does 5.0 not suck enough to do this yet? My new car has AndroidAuto and I want to use it but can't with my current 4.4.4 verison. Last I read, 5.0 sucked and everyone was trying to downgrade. I'm currently rooted with xposed framework and would miss not being able to turn my phone into a hotspot so hopefully that's possible by now too. What exactly do I need to do?
If you are on N12 you can get to 5.0 rooted. There are many threads on this. Have a search around!
I used a method by Jkruse, and now can even use safestrap without ODIN.
Sent from my SM-G900V using XDA Free mobile app
ridenickel9 said:
If you are on N12 you can get to 5.0 rooted. There are many threads on this. Have a search around!
I used a method by Jkruse, and now can even use safestrap without ODIN.
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Is there a dedicated thread for the Jkruze method? I see him referenced here but I don't see anything about his method so far.
I used this as I was already rooted on N12. At the bottom of the first post here:
http://forum.xda-developers.com/showthread.php?p=62333947
If you are not rooted you likely want to start here:
http://forum.xda-developers.com/showthread.php?p=53447240
Warning/disclaimer: read everything before attempting anything to your phone....multiple times. These links / help may ruin your phone. Be careful
Ok, I get the process now after reading but I don't know how to SafeSTrap on NI2 if I'm already rooted. The instructions aren't clear on that, the title says you'll be able to use SafeStrap without ODIN but if I'm already rooted on KK then it just tells me to boot into safestrap...
Do I need to install SS? Do I need to disable xposed if/when I install it?
Ok I'm in SS now and I'm not sure if I should flash over the stock ROM or use a ROM slot. Thoughts? I already made a backup of the entire system and these phones have useless internal memory so I wanted to save space by wiping/installing over the stock ROM. Are there drawbacks to that?
If your rooted, you should have safestrap installed. When you boot your phone do you get a screen that pops up after the S5 screen?
It would show a image and have 2 buttons. One option would be recovery.
I didn't have it but I do now. My main question is about the slots, should I overwrite the stock one or install along side? Don't really have the storage to keep the stock slot but also don't know if doing that will do something irreplaceable.
Since you can load a stock 5.0 rooted ROM I'd do the stock slot... however, that's your call. Make sure you follow instructions to get right kernel and such.
Will you ever need 4.4.4 again ? Even so, long as you don't update the bootloader and can see it in Odin you can always rebuild.
Remember, once your on 5.0 with the newer kernel you can only get to safestrap by flashing the n12 kernel. U can do it by using odin, or lollipop safestrap application if applicable.
Sent from my SM-G900V using XDA Free mobile app
berfles said:
I didn't have it but I do now. My main question is about the slots, should I overwrite the stock one or install along side? Don't really have the storage to keep the stock slot but also don't know if doing that will do something irreplaceable.
Click to expand...
Click to collapse
I don't think the slots were ever working before the dev quit working on it.
Ok cool, that's what I wound up doing anyway and already had to test my backup to see that it worked (it does). Thanks for the help, I'm now on 5.0 and still rooted. Maybe my next step will be xposed, but the only thing I really used on that was the tethering and it already seems to work in this ROM.
Awesome! Glad to hear all is well.
Sent from my SM-G900V using XDA Free mobile app