Related
Anyone have an tips for putting it on as I've had 0 luck with screen protectors in the past.
Cheers
Sent from my GT-I9300 using xda app-developers app
And why is there 2 screen protectors one coloured round the edges and one just clear?
Sent from my GT-I9300 using xda app-developers app
Crisis averted. Did the ole scotch tape trick to remove the dust particles. That should be in all screen protectors instructions as it works a treat.
Sent from my GT-I9300 using xda app-developers app
Good luck
Sent from my GT-I9300 using xda app-developers app
My general rules are (1) try to do it in a humid atmosphere, so there's less dust in the air, eg. a bathroom with a shower running, (2) to wash the back of the protector with water just before applying, and (3) try to fix errant dust motes with tape on the front to peel up a corner, and tape underneath to grab the dust, which it sounds like you've done. Personally I'm a big fan of the Brando ultra-clear protectors. Good luck!
I'm really loving the look of the phone with the colour change but the screen seems to have a kind of static look to it. Hopefully I'll get used to it as the phone looks great
Sent from my GT-I9300 using xda app-developers app
Sent from my GT-I9300 using xda app-developers app
I bought some SGP protectors for my S III. Well one of the kinds I bought was the ultra optics or whichever the the one that resists fingerprints is and it has almost like a texture on the screen which is kind of annoying to look at. I feel like it dulls the whole thing. I may take it off eventually and put the remaining ultra crystal I have from my i747
Really loving this screen protector.
The galaxy's s3 seems to me like it is very prone to scratches.
I always keep my phone in a pocket with nothing in it like keys or money yet I've got some pretty deep scratches on it.
I didnt get anywhere near as much with my s1, s2 or galaxy tab p1000.
Basically this screen is giving me protection and I'd even go as far as to say that it is making the scratches that I've acquired less noticeable.
Feels great too. I'm my opinion better that original screen and you have the added bonus of the anti fingerprint.
Defo recommend this
Sent from my GT-I9300 using xda app-developers app
Hi
Has any one use this screen protector?
I was about to buy it buy i noticed it did not have a front sensor opening, it only has one for camera.
Problem is i bought one before that covered the sensor and once a call came in the screen would not turn back on when i finished the call.
So please if any one has some experience with this one please share with me your experience. Thanks
Here is a video review by ctscloud, thank him. link below.
http://www.youtube.com/watch?v=2xtQSX0-6hc&feature=player_embedded
Sent from my Nexus 10 using xda app-developers app
If i remember correctly my last phone had one of those on it for a while, and it had that awful screen door effect.It wasn't really noticeable on color but when you had a white background it could really drive you nuts. I ended up peeling it off in the end because it got on my nerves so bad when looking at web pages.Spend the extra cash and get a quality one. (XOskins, Skinomi, BSE, etc)
What is a "screen door" effect?
I ordered an XtremeGuard but haven't received it yet.
elzafir said:
What is a "screen door" effect?
I ordered an XtremeGuard but haven't received it yet.
Click to expand...
Click to collapse
But basically you can see like little squares in the phone screen like a screen door.
You see the fine line separating the pixels.
Sent from my Nexus 10 using xda app-developers app
elzafir said:
What is a "screen door" effect?
I ordered an XtremeGuard but haven't received it yet.
Click to expand...
Click to collapse
And i had the same experience with them before, but i changed address hope it does not happen this time...
Sent from my Nexus 10 using xda app-developers app
I just received it. I didn't install it yet, but I can confirm it has all the cuts needed: front camera, sensors, etc.
Here is a picture of it.
(click for full size)
JanusDC said:
I just received it. I didn't install it yet, but I can confirm it has all the cuts needed: front camera, sensors, etc.
Here is a picture of it.
(click for full size)
Click to expand...
Click to collapse
Thanks for the pik bro. Let me know how it turns out. If u get screen effect.
Sent from my Nexus 4 using xda app-developers app
I bought a series of them, but they are the most disappointing screen protectors ever. I'm quite experienced in applying screen protectors and didn't have any trouble applying these protectors, but every single time the top left corner detached from the screen after ~2 weeks. Furthermore: the feel is extremely "plasticcy", and after removing the protectors I noticed that the screen gets a lot less responsive to touch when they're on.
My advice: stay away from the Xtreme guard protectors!
I just installed it last night. I don't like it. Finger don't slide smoothly, kind of sticking to the screen.
Fit is pretty good, and its matte finish. But I can't use it, feels no good.
i have no problems with mine. All of the cuts are perfect and it looks clean imo. I got the full coverage for 3 bucks during a special 70% off sale.
though they are cheap you don't get much but just the screens in the mail. (You get what you paid for)
what i did to install it was i had left over Zagg solution from a previous phone and applied it to the screen.
then i used a hair blow dryer while using a squeegee to remove all the water from under the screen.
orphan22 said:
Thanks for the pik bro. Let me know how it turns out. If u get screen effect.
Click to expand...
Click to collapse
I installed it last night. Just after installed, it got an incredible orange peel effect, however in the instructions it says to wait at least 8hs dry before turning the phone on. So I led it off all the night and this morning most of that effect disappeared. It still has some bubbles (not with air, I think is water, is what caused the orange peel effect before, just that now they are far from each other). So, I will wait until tomorrow to see if this disappear before writing a verdict. If these bubbles do not disappear, I'm afraid I'll have to remove it.
The responsiveness of the screen didn't change.
The plasticity fell I guess will also disappear when the remaining bubbles disappear.
I'll keep you posted.
Sent from my Nexus 4 using xda app-developers app
I've used these xtremeguards on my previous phones because they were cheap but I was never satisfied with them...meh
Bought the body kit that gives sp for the front and back and after a week I decided to go back to skinomi.
Looks like everyone has had trouble with them. Ill wait for his verdict and make my decision... Any ways thanks every one.
Sent from my Nexus 4 using xda app-developers app
Can anyone give me a website to buy a good one? I tried ebay but i can not find the good brands everyone been telling me to get. I wanna check then out.
Sent from my Nexus 4 using xda app-developers app
I've had mine on my n4 for about a week now. You can't even tell that there's a screen protector on it just by looking. It basically looks perfect. However I will say that it definitely feels weird.
Sent from my Nexus 4 using xda app-developers app
Wait, I didn't know that XtremeGuard was a wet application screen protector. Is this true?
Sent from my Nexus 4 pimped with AOKP and Franco.kernel
elzafir said:
Wait, I didn't know that XtremeGuard was a wet application screen protector. Is this true?
Sent from my Nexus 4 pimped with AOKP and Franco.kernel
Click to expand...
Click to collapse
Yes, it is a wet application.
Sent from my Nexus 10 using xda app-developers app
Just to keep you posted. After 24hs of having applied the protectors, the back one is almost perfect, with only 2 or 3 bubbles here and there, but they aren't too noticeable. The front protector have some more bubbles but definitely less than this morning.
The feeling is really plastic.
Overall, I think this will protect the screen, but it isn't good looking. I think I will keep it until I get the flip leather case that I ordered, then I will remove the front one (the one at the back doesn't bother me at all, so I'll keep that).
Will see, maybe for the time when I receive the case I already get used to it. :/
Sent from my Nexus 4 using xda app-developers app
JanusDC said:
Just to keep you posted. After 24hs of having applied the protectors, the back one is almost perfect, with only 2 or 3 bubbles here and there, but they aren't too noticeable. The front protector have some more bobbles but definitely less than this morning.
The feeling is really plastic.
Overall, I think this will protect the screen, but it isn't good looking. I think I will keep it until I get the flip leather case that I ordered, then I will remove the front one (the one at the back doesn't bother me at all, so I'll keep that).
Will see, maybe for the time when I receive the case I already get used to it. :/
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Thanks for all your updates bro. I just bought one today to try it. Hope it works. Any ways good luck hope all the bubbles go away.
Sent from my Nexus 4 using xda app-developers app
Is this the way the phone is supposed to be? There's a small gap between the top part of the bezel where it meets the glass. I try to keep my phone clean all the time but there are quite a few lint pieces and grime stuck in that gap. The bottom of the phone is tight. Never dropped it. It is an RMA
Sent from my Nexus 4 using xda premium
I think you can snap it back. Press it gently and it'll close.
Sent from my Nexus 4 using Tapatalk 2
Pics?
Sent from my Nexus 4 using xda app-developers app
melcali said:
Pics?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Will post pics when I get to a camera
Sent from my Nexus 4 using xda premium
scream4cheese said:
I think you can snap it back. Press it gently and it'll close.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Tried pressing on it. Didn't work. Thanks though
Sent from my Nexus 4 using xda premium
As you can see the bottom is tight with no gap. The top has a big enough gap for dirt and debris and no way to get it out.
Sent from my Nexus 4 using xda premium
Definitely not normal, you should probably RMA again if you can't fix it by simple means like the one posted above
Nigeldg said:
Definitely not normal, you should probably RMA again if you can't fix it by simple means like the one posted above
Click to expand...
Click to collapse
Thanks for your reply. All this time I thought it was normal
Sent from my Nexus 4 using xda premium
I have no gap on the top or bottom, and neither do any of the 5 others I know with N4s so yeah, RMA.
send that gaping gap back, son!
...before you get tiny creature eggs in them
Called google play customer service and started the RMA process. Thanks guys
Sent from my Nexus 4 using xda premium
Not going well with my RMA. This was customer service response :
"Thanks for contacting Google. The*specialists*has informed me that the*gaps are to allow for expansion of the glass due to varying temperature and is an intended part of the design.
If you have any*further*questions please feel free to*respond*to this email."
Can some of you guys take some photos of your phones so I can send this robot? Any other suggestions?
Sent from my Nexus 4 using xda premium
Dude, I think even with photos, you would be hard pressed to change their mind. Cosmetic faults are always put down as subjective and not worthy of replacement. You should have told them that you were experiencing some technical fault i.e. frequent dropped calls.
If you aren't successful this time round, RMA it again with such an excuse...
Sent from my Nexus 4 using Tapatalk 2
esskayy said:
Dude, I think even with photos, you would be hard pressed to change their mind. Cosmetic faults are always put down as subjective and not worthy of replacement. You should have told them that you were experiencing some technical fault i.e. frequent dropped calls.
If you aren't successful this time round, RMA it again with such an excuse...
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
We'll see how it goes
Sent from my Nexus 4 using xda premium
I have the same issue but my gaps are much bigger and go throughout the whole screen. Dust and stuff goes in it. The front camera has a dark overlay whenever i use it due to all the dust that has gotten in there. I would RMA it but i bought it off a friend and im not sure if they want to accept it.
Here is a picture of a white door that i took outside using the front camera.
http://alienroms.com/IMG_20130502_194637.jpg
Its very dark and it has a weird dark overlay at the top.
Guys, I got my nexus 4 a few days ago any it's been awesome!! Today I dropped my phone any it got scratched!! The scratch is slightly noticeable when the screen is on and very bright! I can also see a rainbowish effect (very very small) when the screen is on!! Is there any way to hide this scratch!! Please please help me out!!! Thank you!!
Sent from my Nexus 4 using xda app-developers app
Please ignore the typos!
Sent from my Nexus 4 using xda app-developers app
Don`t think you can hide it with a screen protector, but you could try. Maybe it will look a bit better. Best way would be to have the screen replaced. Didn`t you use a case or bumper? It is a glassy phone proned to shatter on impact.
Did you even try Google? If it's not as bad as the one in the linked guide, just cover it with a scratch protector and you won't be able to notice it.
Alright, I am using a poetic borderline with my nexus, I ordered a nillkin screen protector... Hope it works!!!
Sent from my Nexus 4 using xda app-developers app
Okay, the screen protector turned out to be matte and it just made the scratch look worse. Ordering a wet install screen protector soon.. Any idea if they will work?? I can feel the scratch when I run my finger nails over it and it is clearly visible outdoors!!
Sent from my Nexus 4 using xda app-developers app
S.H.A.D.E said:
Okay, the screen protector turned out to be matte and it just made the scratch look worse. Ordering a wet install screen protector soon.. Any idea if they will work?? I can feel the scratch when I run my finger nails over it and it is clearly visible outdoors!!
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Only a new screen can solve your problem
Try displex, i heard it's working, never tried it though.... It's worth a shot...
Sent from my Nexus 4 using xda app-developers app
hi guys
i just bought samsung gakaxy note 3 N9000 (exynos version) 2 days ago and i noticed something weird with the stylus
there is a certain area of the screen (to the right exactly) that the stylus doesn't write properly i need to press hard on this area when i try to write or scroll and sometimes it doesn't write even if i pressed hard
any ideas what could be the problem??!!!
the finger touches work normally only the stylus
i tried to record it but all screen recorders require rooting and i don't want to root this phone now
i took a screen capture by "Screen Write " feature with the air command .... you can see clearly the area that has no Red lines in the right of the screen
thnx all
Looks like a defect
Sent from my SM-N900P using xda app-developers app
phyba said:
Looks like a defect
Sent from my SM-N900P using xda app-developers app
Click to expand...
Click to collapse
so should i replace it???
i just bought it
phyba said:
Looks like a defect
Sent from my SM-N900P using xda app-developers app
Click to expand...
Click to collapse
I would if u are still within your return window. It shouldn't be doing that
Sent from my SM-N900P using xda app-developers app
phyba said:
I would if u are still within your return window. It shouldn't be doing that
Sent from my SM-N900P using xda app-developers app
Click to expand...
Click to collapse
thank you for your answer :good:
the problem solved by removing the case
i read on another forum that some types of cases interfere with the magnetic field of the stylus
weird :silly::silly:
i removed the case and the stylus is working fine now all over the screen
mktns said:
hi guys
i just bought samsung gakaxy note 3 N9000 (exynos version) 2 days ago and i noticed something weird with the stylus
there is a certain area of the screen (to the right exactly) that the stylus doesn't write properly i need to press hard on this area when i try to write or scroll and sometimes it doesn't write even if i pressed hard
any ideas what could be the problem??!!!
the finger touches work normally only the stylus
i tried to record it but all screen recorders require rooting and i don't want to root this phone now
i took a screen capture by "Screen Write " feature with the air command .... you can see clearly the area that has no Red lines in the right of the screen
thnx all
Click to expand...
Click to collapse
Do you have a case with a magnet?
Regards,
Dave
EDIT: Didn't see last part in thread! Doh!
Sent from my SM-N9005 using Tapatalk
ya the Problem was With the magnet in The Case
Sadly I had to cut throw the leather of The Case To remove the magnet
from inside
Better Than discarding the whole case
Thank you all for your answers :thumbup::thumbup::thumbup:
Sent from my SM-N900 using xda app-developers app
Just to contribute.
I tested mine out. Smooth all the way left to right top to bottom. Effortlessly registered.
Sent from my SM-N900W8 using XDA Premium HD app
Any case with a magnetic latch causes this problem, happened to me in note 2 .that area of the screen is exactly where the flip cover magnet button is when the the case gets turned on itself
Sent from my SM-N900 using Tapatalk