Database Users

GUIDE - Install TWRP Recovery and Root MOTO E Phone

WARNING!
Your warranty is void if you follow the given instruction in this guide. Read all the instruction very carefully and Perform everything at your own risk.
This guide is only for the MOTO E android smartphone. Don’t try this method on any of other Android devices, It may hard brick your device. So, first confirm your phone model number in your android phone settings. To do this Go the Settings page of your device and check out the “About Device” option.
PRE-REQUISITES AND REQUIREMENTS
1. BACKUP YOUR ANDROID DATA
2. INSTALL MOTO E DRIVERS
3. ENABLE USB DEBUGGING MODE
4. CHARGE YOU ANDROID
If your device switched off during this process, it could damage or brick the device. Make sure that your Android battery is full charge or near about 50-70% battery level.
HOW TO INSTALL TWRP & ROOT MOTO E
Step 1. Download the Fastboot files for MOTE E and extract the folder on your desktop.
Step 2. Download The TWRP recovery from here (Rename the file to recovery.img) and extract in the same folder as of step 1.
Step 3. Download The SuperSU from here and copy it into the root of your internal memory,
Step 4. Now all the important files are with your. First you have to unlock the bootloader of your device. Read here.
Step 5. Connect your phone to PC and Reboot to bootloader by pressing VolumeDown + Power button for about 6-7 seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 6. Go to the Fastboot folder in step 1, Do Shift + RightClick in empty space in the folder without selecting anything, Select Open a command window here.
Step 7. Now you will see the command prompt window on your screen. In the command prompt window, you need to enter the below mentioned command;
fastboot flash recovery recovery.img
Step 8. Press Volume Down to select recovery on fastboot menu, then press Volume Up to confirm your choice to boot into recovery
Step 9. Now touch doesn’t work in recovery straight away, so wait 60 seconds without touching the phone, The phone screen will go blank.
Step 10. Press power button and do swipe to unlock to get your touch working again! Select Install, scroll down and find the SuperSU Zip downloaded in step 3.
Step 11. Swipe to confirm, wait untill the flash is complete and then select reboot. First reboot will take some time, so no need to worry.
Now check your MOTO E app drawer, There should be SuperSU installed. Congratulations you are rooted!
via @howtorootmobile

I think so this guide is already available!!

TheStrix said:
I think so this guide is already available!!
Click to expand...
Click to collapse
Yeah I did that guide earlier!

recovery flash error
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks

5644red said:
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks
Click to expand...
Click to collapse
Write
Code:
mfastboot flash recovery recovery.img
it will work!

deej_roamer said:
Write
Code:
mfastboot flash recovery recovery.img
it will work!
Click to expand...
Click to collapse
Thanks for the help buddy but still it isnt working.

5644red said:
Thanks for the help buddy but still it isnt working.
Click to expand...
Click to collapse
Download another version of mfastboot, or simply just fastboot, or try from scratch again!
I saw earlier your mfastboot folder has recovery.img, so cannot be a misplace error!
Still check again it is there! Otherwise, do what i wrote in first line!

deej_roamer said:
Download another version of mfastboot, or simply just fastboot, or try from scratch again!
I saw earlier your mfastboot folder has recovery.img, so cannot be a misplace error!
Still check again it is there! Otherwise, do what i wrote in first line!
Click to expand...
Click to collapse
tried like 5 or 6 times buddy.. still no use.. i was able to unlock bootlocker without any trouble so i hope there is no trouble with moto drivers, i feel it might be due to fastboot file.. ill try again soon.. thanks

Can you please tell me if i will be able to install the 4.4.3 update after flashing custom recovery. Thanks in advance

Ccceenu said:
Can you please tell me if i will be able to install the 4.4.3 update after flashing custom recovery. Thanks in advance
Click to expand...
Click to collapse
No you need stock recovery!
But its alright you can revert back to custom recovery from here
So go back and enjoy custom recovery,
And if you still prefer not to change your recovery, you can try this guide!

deej_roamer said:
No you need stock recovery!
But its alright you can revert back to custom recovery from here
So go back and enjoy custom recovery,
And if you still prefer not to change your recovery, you can try this guide!
Click to expand...
Click to collapse
Thanks for your reply..I read that somewhere that during updates it checks for stock recovery..so i refrained from flashing custom recovery ... there is another question if you can answer...will the procedure of rooting will change in the 4.4.3 version. Thanks in advance

Ccceenu said:
Thanks for your reply..I read that somewhere that during updates it checks for stock recovery..so i refrained from flashing custom recovery ... there is another question if you can answer...will the procedure of rooting will change in the 4.4.3 version. Thanks in advance
Click to expand...
Click to collapse
No it wouldn't

moto e
i unlocked my bootloader can i directly install supersu from recovery without flashing custom recovery?

I guess....
5644red said:
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks
Click to expand...
Click to collapse
Did you make sure that you actually 'Opened' the 'fastboot' folder and then press shift and right click....?

having same problem
5644red said:
Thanks for the help buddy but still it isnt working.
Click to expand...
Click to collapse
Hey did u problem got sorted as I am having the same problem as u, kindly help me if anyone can

I tried to install twrp recovery but in cmd its shows an error
Error while loading recovery.img

Can I change my recovery from cwm to twrp
Sent from my Moto E using XDA Free mobile app

I am getting "partition size mismatch" error when i try to flash the TWRP recovery.

[ROOT]How to get root Moto G 2015 With Android Marshmallow 6.0 (worked in XT1541)

:fingers-crossed:How to get root Moto G 2015 With Stock Android Marshmallow 6.0 (XT1541)​
Hi guys. Now I have a Moto G 2015 XT1541 with previously unlocked bootloader (following Motorola Guide described here, be careful unlocking bootloader wipes everything!) with recently installed Europe Retail Stock ROM MM 6.0, but i was having some issues trying to install TWRP 3.0 and SuperSU 2.65....until now.
With latest SuperSU you will get bootloop, and probably you need to reinstall the stock rom completely.........but... ....This method works fine!
Try it yourself on XT1540, XT1542, XT1543, XT1544 and XT14548 variants
So, I have used TWRP twrp-osprey-2.8.7-r7.img for the recovery and Super SU Beta 2.62 (BETA-SuperSU-v2.62-3-20151211162651.zip) to get root on my device.
Get TWRP recovery and ROOT
Step 0: enter to developer options (tap 7 times the build number) and select Allowing USB debubbing and Allow OEM unlock options
Step 1: install TWRP 2.8.7-r7 entering to bootloader mode
Turn off the device, press power and volume down and wait for two seconds. device will show bootloader mode in black screen, connect it to the pc through usb cable
Step 2: Paste twrp2.8.7-r7.img file into folder \Android\sdk\platform-tools and rename it to recovery.img (this requires previously installed Android SDK Tools, but you can do the same with MinimalADB
open cmd in windows, navigate to the platform-tools folder location and write this line:
Code:
fastboot boot recovery.img
Wait until ok message appears in cmd
TWRP will appear, and press reboot System. Enter bootloader mode again and type in CMD the following:
Code:
fastboot flash recovery recovery.img
Wait until ok message appears in cmd. After that, press in bootloader mode the recovery option, you will enter to twrp and now new recovery becomes permanent, press Reboot system.
Step 3: copy BETA-SuperSU-v2.62-3-20151211162651.zip file into the device and after that, disconnect it from usb
Step 4: turn off the device, enter bootloader mode as stated in step 1, and select the recovery option with the volume up and down , press power button to enter to recovery and twrp will appear instead of original recovery.
Step 5: in twrp press install, select location of the Beta SuperSu File, select beta Super SU zip file and allow installation swipping to the right side and wait until it finish.
Step 5.1: after flash Super SU, wipe dalvik and cache through twrp, pressing the wipe dalvik/cache button located in left side.
Step 6: in twrp press button reboot now.
Wait a little while android rebuild the cache.
The device will enter to the home screen. check that super su app is installed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: if twrp offers to you install SuperSu dont let it. That causes a bug.
Step 7: Install Root checker and check if you are root.
Thats all folks!!
-------------------------------------------------------------------------------------------
Plus 1 - If something goes wrong you can reinstall Stock as described in this repair guides. Check here the firmware and here the reinstall instructions
Plus 2 - How to delete the Motorola annoying unlock bootloader message:
Step 0: connect the device to the pc, copy unlocked_logo.zip file into the device and after that, disconnect from usb
Step 1:
Turn off the device, press power and volume down and wait for two seconds. device will show bootloader mode in black screen
Step 2: In bootloader mode select with the volume up and down the recovery option, press power button to enter and twrp will appear
Step 3: in twrp press install, select location of the unlocked_logo.zip File, select that file and allow installation swipping to the right
Step 4: in twrp press reboot now. The device will boot without nagging window.

Excellent instructions. First time I saw detail to flash TWRP in a manner that does not revert back to stock recovery.
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.

MrTooPhone said:
Excellent instructions. First time I saw detail to flash TWRP in a manner that does not revert back to stock recovery.
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.
Click to expand...
Click to collapse
Thank you so much! you appreciate my work after several soft bricks and some bootloops something good result! :silly:

MrTooPhone said:
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.
Click to expand...
Click to collapse
Man I wish read your advice last night before I used one of those automated programs to root (installed latest super su) and bootloop city. I figured I would make a backup right after rooting.
I recovered by installing a close to stock 5.11 rom with twrp but would like to get back to MM without starting from scratch.
Does anyone know of a Stock MM rom (not ASOP) that can be installed with twrp?

If you get that The phone is not allowed to unlocked The bootloader when i try, how can i unlocked it then
Skickat från min MotoG3 via Tapatalk

Hi can i use same method to root my moto g xt1550 6.0 2Gb version?
Pls reply.
And i there CWM recovery available instead of TWRP Recovery...
I like CWM.

moto g 3rd gen
did everything in tor says no such file or dorectory software status says modified does that have anything to do with it? I'm lost

Amirphp said:
Hi can i use same method to root my moto g xt1550 6.0 2Gb version?
Pls reply.
And i there CWM recovery available instead of TWRP Recovery...
I like CWM.
Click to expand...
Click to collapse
I have same question

Amirphp said:
Hi can i use same method to root my moto g xt1550 6.0 2Gb version?
Pls reply.
And i there CWM recovery available instead of TWRP Recovery...
I like CWM.
Click to expand...
Click to collapse
AniketDhoke said:
I have same question
Click to expand...
Click to collapse
yes you can use this method for xt1550
there is no CWM recovery for Osprey

how much time will it take to rebuild the cache..?? please tell me...after the process 40 mins has passed and still now my moto g3 has not turned on...it still on the boot screen .......

hkr008 said:
how much time will it take to rebuild the cache..?? please tell me...after the process 40 mins has passed and still now my moto g3 has not turned on...it still on the boot screen .......
Click to expand...
Click to collapse
I've had it do that on a new flash and I just held the power down until it shut off and when I turned it back on it boots normally.

Thanks, did not understand why the latest version not started, I see that you can not install a more current than version 2.65.
Enviado desde mi MotoG3 mediante Tapatalk

veloz46 said:
Thanks, did not understand why the latest version not started, I see that you can not install a more current than version 2.65.
Enviado desde mi MotoG3 mediante Tapatalk
Click to expand...
Click to collapse
Yes the tutorial is very clear versión 2.62-3 is the only one that works
Sent from my MotoG3 using Tapatalk

One tap root
Is any one tap root system available for moto g version 3 (2015) xt1550 running android 6.0 with build number mpi24.65-25 . need it desperately !

in STEP 2, if i use adb minimal i've not this folder \Android\sdk\platform-tools, where i put recovery.img? on minimal folder?
MrTooPhone said:
Excellent instructions. First time I saw detail to flash TWRP in a manner that does not revert back to stock recovery.
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.
Click to expand...
Click to collapse
how i can do that?
thanks

sethgreen said:
" after the first boot to recovery, make a clean (pre-root, pre-cutom recovery)"
how i can do that?
Click to expand...
Click to collapse
Make sure you have a portable SD Card installed. Then simply boot TWRP, set back up location to SD Card, and make back up. If you never used TWRP, you may want to Google it and learn a little before your first attempt.

roouted my device, everything ok

Just to report, it worked on my XT1543 (dual sim, 1GB)
Enviado de meu MotoG3 usando Tapatalk

Couldn't get this to work on XT1541 with 24.44.1.osprey_reteu_reteu.en.EU reteu with the instructions mentioned in the first post.
I got things to work by using the latest SuperSU and forced it to install in system-less mode. This worked quite well.
1. First go to bootloader using power+volumedown or from PC:
Code:
adb reboot bootloader
2. Then boot TWRP (3.0.0-r2 in my case worked fine):
Code:
fastboot boot twrp-osprey-3.0.0-r2.img
3. Now copy SuperSU to the phone:
Code:
adb push BETA-SuperSU-v2.68-20160228150503.zip /sdcard/
4. Next make sure SuperSU will install in system-less mode:
Code:
adb shell
echo SYSTEMLESS=true > /data/.supersu
5. Install SuperSU by pressing "Install" in TWRP, select BETA-SuperSU-v2.68-20160228150503.zip and swipe. After installing you should see in the log that it used system-less mode. Now you can "Clear Cache/Dalvik" as well.
6. Now reboot. It should show the "Warning Bootloader Unlocked" screen once, then reboot, then show it again and this time it should continue booting into Android.

Hi guys, for me I had NO problem flashing "BETA-SuperSU-v2.62-3-20151211162651.zip" using "twrp-osprey-3.0.0-r2.img" on MPI24.65-33.1 Build number XT1541 (+ Allow OEM unlock options)

B371 update for vns-l21c432?

This update for p9 lite B371?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you cant see picture here is link
https://yadi.sk/i/sGrM8Zhz3GkMjJ

Yes

This is awesome!
Have you installed it? And if yes, is it working as it should work? Camera...?

Tried to install it using 3 buttons method, but it failed at 5%.
I'm on B161.

I just updated my vnsl21c432 to b370 from b170.
1. copy update.zip and updata_data_full to sd card
2. boot to twrp
3. flash both zips WITHOUT booting inbetween
3a (there will probably be an error about mounting data, there was in my case)
3b1 DONT BOOT and go to twrp > wipe > data > change filesystem > choose F2FS (was not an option in my case, so i just chose FAT)
3b2 change filesystem of /data AGAIN, this time back to EXT4
3c flash update_data_full AGAIN
4. shut down the device. DON'T BOOT
5. extract recovery.img from UPDATE.APP using Huawei Update Extractor
6. phone turned off, hold volume down and plug in the usb cable to boot into fastboot
7. flash stgock recovery you extracted at step 5 with this command fastboot flash recovery recovery.img
8. NOW BOOT into nougat
9. factory reset
Prior to factory resetting I noticed no apps were msising, BT, WIFI, camera all working.
Now I'm going to try and root it.

zgomot said:
I just updated my vnsl21c432 to b370 from b170.
1. copy update.zip and updata_data_full to sd card
2. boot to twrp
3. flash both zips WITHOUT booting inbetween
3a (there will probably be an error about mounting data, there was in my case)
3b1 DONT BOOT and go to twrp > wipe > data > change filesystem > choose F2FS (was not an option in my case, so i just chose FAT)
3b2 change filesystem of /data AGAIN, this time back to EXT4
3c flash update_data_full AGAIN
4. shut down the device. DON'T BOOT
5. extract recovery.img from UPDATE.APP using Huawei Update Extractor
6. phone turned off, hold volume down and plug in the usb cable to boot into fastboot
7. flash stgock recovery you extracted at step 5 with this command fastboot flash recovery recovery.img
8. NOW BOOT into nougat
9. factory reset
Prior to factory resetting I noticed no apps were msising, BT, WIFI, camera all working.
Now I'm going to try and root it.
Click to expand...
Click to collapse
Is it better to install it in TWRP or using the system updater? Because I sent the update to the system updater and its downloading now...

E bas sporo ide upadte. Ja ga skidam kroz sistem. Tek je na 2%
very slow-going update. I'm taking him through the system. It was only at 2%

crowbgd said:
E bas sporo ide upadte. Ja ga skidam kroz sistem. Tek je na 2%
very slow-going update. I'm taking him through the system. It was only at 2%
Click to expand...
Click to collapse
Pokusaj da vratis default proxy (none), pusti nesto na youtube-u i bice brze.
Try to change the proxy settings to none after the download starts and play a videos from youtube and it'll download faster.

Mislis na telefonu da pustim Youtube?
You mean on the phone to let Youtube?

crowbgd said:
Mislis na telefonu da pustim Youtube?
You mean on the phone to let Youtube?
Click to expand...
Click to collapse
Yes.

Nope,now is stoped and popup notification Network is unstable. Pls try later .Im paused Update,back to Proxi non,and now go with normal speed.

crowbgd said:
Nope,now is stoped and popup notification Network is unstable. Pls try later .
Click to expand...
Click to collapse
Go into the system updater and press resume. It works for me. And it worked before.)

You have PM

Magisk installed. Root access present. Viper4Android installed.
So far, so good.

can't update via Dload method ;/

Johnny TDN said:
can't update via Dload method ;/
Click to expand...
Click to collapse
Try the TWRP method. I posted a short guide a few posts back.

zgomot said:
Try the TWRP method. I posted a short guide a few posts back.
Click to expand...
Click to collapse
thanks.
After instalation, app twin and user settings are gone.
In the beta version, they were there.

Heh download upadte,and verification is not pass?

Did anyone successull update to B371 using Firware Finder? Any confirmation?

Successfully installed it using the system updater. The update has finished downloading, the phone rebooted into twrp and installed the update.

Xiaomi Redmi 2 2014811 bricked after updating SuperSu binary in recovery?

I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sufoc said:
I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
Click to expand...
Click to collapse
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!

edit: solved

edit: solved

sethidheeraj06 said:
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!
Click to expand...
Click to collapse
The fastboot rom is incorrect for my model (missmatching image and device error)

sufoc said:
The fastboot rom is incorrect for my model (missmatching image and device error)
Click to expand...
Click to collapse
Which device do you have..?
Kindly tell the model no. Such as 2014818.

sethidheeraj06 said:
Which device do you have..?
Kindly tell the model no. Such as 2014818.
Click to expand...
Click to collapse
It's the same as in the title, 2014811 TD-LTE

EMUI 9.1.0.210 for DUK-L09C432 (dload firmware)

DUK-L09 9.1.0.210(C432E3R1P5T8)_Firmware_9.0.0_r3_EMUI9.1.0_05014KJB:
https://mega.nz/#!zxInmY6K!iez4Y2Kmg5smCndC8gMqZrjw42FXYVR6CDMM49HCcHQ
This is a dload firmware which works on every DUK-L09C432 with EMUI9.0.
Simply put the dload folder in the root of your microsd, power off the phone and boot it again with all 3 buttons (vol+/- and pwr) pressed for 5-8s.
Voila, it should start installing the new firmware.
Security patches are recent: 5. July 2019.

OldDroid said:
DUK-L09 9.1.0.210(C432E3R1P5T8)_Firmware_9.0.0_r3_EMUI9.1.0_05014KJB:
https://mega.nz/#!zxInmY6K!iez4Y2Kmg5smCndC8gMqZrjw42FXYVR6CDMM49HCcHQ
This is a dload firmware which works on every DUK-L09C432 with EMUI9.0.
Simply put the dload folder in the root of your microsd, power off the phone and boot it again with all 3 buttons (vol+/- and pwr) pressed for 5-8s.
Voila, it should start installing the new firmware.
Security patches are recent: 5. July 2019.
Click to expand...
Click to collapse
will it work on c675?
Sent from my 8 Pro using XDA Labs

OldDroid said:
DUK-L09 9.1.0.210(C432E3R1P5T8)_Firmware_9.0.0_r3_EMUI9.1.0_05014KJB:
https://mega.nz/#!zxInmY6K!iez4Y2Kmg5smCndC8gMqZrjw42FXYVR6CDMM49HCcHQ
This is a dload firmware which works on every DUK-L09C432 with EMUI9.0.
Simply put the dload folder in the root of your microsd, power off the phone and boot it again with all 3 buttons (vol+/- and pwr) pressed for 5-8s.
Voila, it should start installing the new firmware.
Security patches are recent: 5. July 2019.
Click to expand...
Click to collapse
quite strange.. since i'm on Android 9 i can't enter fastboot mode anymore!(smartphone is fully working.. rooted , unlocked )
i tried trough adb "adb reboot fastboot "
also by button sequence..
honor 8 pro just restart ...
anything i could do?
P.S. just tried... even recovery is not working!! so i can just use ADB commands but can't boot in recovery or fastboot

simika said:
quite strange.. since i'm on Android 9 i can't enter fastboot mode anymore!(smartphone is fully working.. rooted , unlocked )
i tried trough adb "adb reboot fastboot "
also by button sequence..
honor 8 pro just restart ...
anything i could do?
P.S. just tried... even recovery is not working!! so i can just use ADB commands but can't boot in recovery or fastboot
Click to expand...
Click to collapse
connect the phone to pc, keep vol- pressed directly after pressing restart on the phone, it should enter fastboot now.
"adb reboot recovery" should work though.
Regards

thank you, I'm gonna try tonight ...
I'm afraid that recovery somehow "disappeared" lol.. when I update from oreo to pie and I changed it to twrp to install magisk! anyway tonight I try, if I get in fast boot I can install recovery (this time pie stick recovery, so I can update to 9.1..cuase if I try "dload" now it just reboot..)
OldDroid said:
connect the phone to pc, keep vol- pressed directly after pressing restart on the phone, it should enter fastboot now.
"adb reboot recovery" should work though.
Regards
Click to expand...
Click to collapse
Sent from my DUK-L09 using Tapatalk

OldDroid said:
connect the phone to pc, keep vol- pressed directly after pressing restart on the phone, it should enter fastboot now.
"adb reboot recovery" should work though. (PLEASE READ AT BOTTOM.. " my solution " )
Regards
Click to expand...
Click to collapse
YES ! like that it worked !!! thank you
[EDIT]
so what i want to do is:
fastboot boot recovery.img BUT is not rebooting in recovery( and not loading it )
but it gives me this error: downloading "boot.img" so it's ignoring my command of booting with recovery.img
i've got stock recovery from UPDATE.app file of my actual rom ( 9.0.1.175 )
i didn't want to "install" the recovery cause i'm not sure it's the right file ... : (i've choosen recovery_ramdis.img)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is that the right one? in that case i can just install it .. cvause at the moment i can't reboot in any recovery !
[EDIT SOLUTION]
so since anyone could have my doubts ... here it is my " solution !
at the end i did install stock recovery ( which was RECOVERY_RAMDIS.img got from update.app and extracted by huawei update extractor)
fastboot flash recovery_ramdisk recovery_ramdis.img
than i use
fastboot reboot
and since i had the installation package already in my smartphone it went directly into UPDATING status ( through emui update program )
took less than 5 minutes to update to this latest EMUI 9.1.0.210
and 2/ 3 minutes for honor 8 pro to reboot.. and i had to change my underwear LOL !
at the moment i've lost root ... but probably i can get it back in the same way as i did with previous PIE !

LAST UPDATE ( check my other thread ) .. i could install EMUI 9.1.0.210 and ROOT It !
all working thank you @OldDroid for earlier support and doubts cleaning lol !
whoever wants to root EMUI 9.1.0.210 i made a step to step in Emui 9 with Root Honor 8 pro ( tested by myself ...root 100% working ! ) July 2019 thread!

hey
i have a duk l09c432b183 on emui 5.1
does this firmware works for me and how ?

Please I need your answer cause I don't want to brick my phone
So can someone tell me how to e