Hi everyone,
I got two devices and they are in Android 4.2.2.
the devices are running very slow so I wanted to root then and upgrade.
But when I pluged the devices to my PC , the PC is unable to detect the devices!
So i tried to enter debug mod, instal Kies3,install drivers , but still nothing... just the device manager says that it was unable to install "spreadtrum phone" driver. I tried to fing online those drivers but I didnt succeed to install them and still.. the phones are not detected on the PC...
I tried uninstall and reinsatll all over the process but still nothing..... I'm running on OS windows 7 64bit by the way....
thanks for the help!
rotemkama said:
Hi everyone,
I got two devices and they are in Android 4.2.2.
the devices are running very slow so I wanted to root then and upgrade.
But when I pluged the devices to my PC , the PC is unable to detect the devices!
So i tried to enter debug mod, instal Kies3,install drivers , but still nothing... just the device manager says that it was unable to install "spreadtrum phone" driver. I tried to fing online those drivers but I didnt succeed to install them and still.. the phones are not detected on the PC...
I tried uninstall and reinsatll all over the process but still nothing..... I'm running on OS windows 7 64bit by the way....
thanks for the help!
Click to expand...
Click to collapse
Chinese clon s4?
Enviado desde mi GT-P7510 usando Tapatalk 2
Related
Hello guys
I ran through n no. of threads
I checked the steps for rooting the phone
And i did it accordingly but the "waiting for device" issue still prevails
I downloaded SE USB drivers as well though i don't know how to install them
I've PC companion's 2.0.0 version
I've SuperOneClick's 1.7 version
I'll tell you the steps i followed
1. SuperOneclick started
2. Click ROOT tab
3. Starting ADB... Waiting for status
4. With Unknown sources ON and USB debugging ON, i connect the phone
Even then it says Waiting for device
I read in the forums that it needs Windows Vista or 7
I've Windows XP Professional though 2002 Service pack 2 version
Pls help me get through this problem
Sorry for creating a new thread but i've been trying to this since hours together
What is the exact problem? And how do i check whether I've latest Sony Ericsson USB Drivers?
When it says waiting for device when phone is connected try to turn usb degging off and on or try to root phone with FlashTool
I´ve rooted on XP 2002 Home Edition SP3 without any problems.
Try it the following way, it worked perfectfor my sister´s phone with SE 2.1 (because I don´t know what I did with my phone any more , and we both have an E15i :
First of all, be sure that you are using the computer where you´ve upgraded to 2.1, or download the X8-drivers somewhere (google is your friend!^^)
extract the attached SuperOneClick.
Run the SuperOneClick.exe.
Enable USB debugging on your phone, but do not connect it yet.
Click "root".
let SOC start the ADB and the other stuff.
Connect your phone when it says "waiting for device".
After a few seconds, you should have root.
Try to install Sony ericsson update service...it will install the latest drivers during the installation of the program..
Sent from my X8 using XDA App
Ok, I'm having a problem here. I'm buzy on a ROM, and I have made something that I want to test. But when I try to access my phone via adb, it doesn't show up in adb devices. Just nothing. I reïnstalled adb, the drivers, rebooted the phone and computer, put on debugging mode, everything. The phone is showing in (windows) devices, but adb just don't recognize him. I'm on Windows 7 Home Premium. And on my phone Swiftdroid M5 (with ClockworkMod Recovery 3.2.0.1, which is working properly). Anyone knows what to do?
Anyone?
Sent from my GT540 using Tapatalk
Heres my solution ^^ adb worked for me some weeks ago but now i had your problem too lol:
first uninstall all the adb drivers from:
Start>devicemanager
then get this :
http://www.junefabrics.com/bin2/LGDriver.exe
original LG drivers
and install
then plug your phone(debugging on of course)
then it will show 7 (i think) installations
5 of them will be done fast but 2 won't finish installation
so just go to devices and printer
rightclick on android sooner single adb interface and select troubleshooting( marked with a yellow triangle)
then just let is solve the error
the last of the 7 drivers wont install but thats not a problem
EDIT: make sure u know on which port u were doing this
Oh of course you should reinstall the adb drivers. Btw i'm in linux you can use linux for building rom. What are you using?
Sadronis said:
Oh of course you should reinstall the adb drivers. Btw i'm in linux you can use linux for building rom. What are you using?
Click to expand...
Click to collapse
Windows 7 + Ubuntu 11.10
Sent from my GT540 using Tapatalk
is fastboot working now ?. and installed properly in device manager.
regisol said:
is fastboot working now ?. and installed properly in device manager.
Click to expand...
Click to collapse
Wrong topic
Sent from my GT540 using Tapatalk
Hello, I tried all of the above but my device still doesn't get recognized. Is there any other way to fix this? Thanks.
I've been in the same situation like this before. My phone wasn't recognized by adb. I though it was a driver problem so I reinstall the driver million times but it doesn't help. I tried on many other computer with various OS as well but adb still can't recoginized it. At last I flash another ROM and adb can recognized my phone again. so the problem is the SDSL ROM
I see. Thanks for the info ^_^
Hi
Whenever i connect my phone to my pc it starts to charge but i'm not able to browse the phone in explorer (it shows nothing).
In device manager i see the samsung driver with a yellow triangle
I tried a lot already:
-auto update
-manual update
-uninstall and search for new hardware
I also tried it with kies, same thing it doesnt find the phone.
I tried uninstalling everything from samsung and whatever i could find.
Still the same problem i tried kies drivers i tried more specific drivers all failed.
On my windows 8 boot it does work (another drive so they shouldnt cause trouble to each other at least i think)
and at my work on windows xp it also works without any problems
What do you think it might be?
Try installing the latest Java s/w. Also for drivers go to samsung's official website and manually install drivers.
It would work if instructions are followed properly.
Since your phone is recognized by Windows 8, your phone is alright the problem is with the OS.
| Mobile Message
Connect your phone to your PC using the USB cable... Now go into your device Manager. ..
Uninstall all the usb drivers and reboot your pc... Once it reboots it will automatically start installing all the required USB drivers again...
Now see if your phone is detected in your My Computer...
Sent from my GT-I9500 (Hassan Khalid Malik) using Tapatalk 2
Hi guys!
I have just recently installed bobcat rom on my note 3 device and since than i cant connect my note 3 with my PC or any other..
So problem is with MTP driver.. I have tryed almost everything what i found on google or forums but nothing helps..
Do you maybe have some ideas? I ve tryed factory reset on note, reinstalling windows dowloaded many drivers but nothing helps..
Thx
WiseDog85 said:
Hi guys!
I have just recently installed bobcat rom on my note 3 device and since than i cant connect my note 3 with my PC or any other..
So problem is with MTP driver.. I have tryed almost everything what i found on google or forums but nothing helps..
Do you maybe have some ideas? I ve tryed factory reset on note, reinstalling windows dowloaded many drivers but nothing helps..
Thx
Click to expand...
Click to collapse
1- Make sure the correct driver has been installed on your PC. You can install Kies 3 for sure.
2- Make sure the correct USB mode is selected in your device: enter *#0808# and check if MTP+ADB is selected.
Doesnt work.. I have changed it to MTP + ADB but the message on my screen is the same..
When i connect note 3 with my laptop the drivers begin to install but after a minute i got error screen on note and failed install message on laptop.. Drivers are all up date and kies is installed.
WiseDog85 said:
Doesnt work.. I have changed it to MTP + ADB but the message on my screen is the same..
When i connect note 3 with my laptop the drivers begin to install but after a minute i got error screen on note and failed install message on laptop.. Drivers are all up date and kies is installed.
Click to expand...
Click to collapse
In this case try another rom or stock firmware.
Ok i will try, but is there anybody else with this bobcat rom problem?
Thx for help!
WiseDog85 said:
Ok i will try, but is there anybody else with this bobcat rom problem?
Thx for help!
Click to expand...
Click to collapse
You'd better post a question in the rom's supporting thread.
I can't update firmware using odin ,it keep saying not recognized ,any other ways can i flash firmware without using usb port? Hope anyone can help me
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
syverman said:
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
Click to expand...
Click to collapse
i have try many cable, computer but its still same. its just charging on the phone and not recognized on pc. im stuck on unofficial miui with a lot of bugs, please give me someways to stock my firmware back without using odin or anything that use usb port because my usb port its just for charging only, not working for odin.
Rith click on computer and click on comlutef propeeties then ect device manager u will use warning icon in the list something name i am forget right click on it u will use option update driver click on it then select specific driver path where your driver are installed then search then Huh Huh xD restert your pc then connect your phone:good:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Sent from my SM-G530H using XDA Free mobile app
my SM-G530H connected and detected in windows but not on samsung kies
Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA)
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA) . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
M.Abdul Quddus from Pakistan
+923006021721
Did you get this sorted out and how ? I have a similar problem.
Sent from my SM-G530H using XDA Forums
redfeast said:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Click to expand...
Click to collapse
I doubt it is a driver issue because I have tried multiple systems and these systems recognize other phones instantly
its the same from my phone sadly i didnt find any firmware for this its a clone i think