Database Users

Addons When Flashin to Rom

When flashing a new rom, do you guys do it this way:
1. Wipe etc...
2. Flash Rom
3. Flash Gapps
4. Reboot and wait for first boot.
5. Reboot into recovery and flash the addons like cerberus, photosphere, boot animation
or do you guys
1. Wipe etc.
2. Flash Rom
3. Flash Gapps
4. Flash addons
5. Reboot and wait for first boot
Which is the best method? Is there any difference?

Marshmallow-Oneplus2- Help section

Kindly share everything about marshmallow here.

http://downloads.oneplus.net/2016-03-30/op2/OnePlus_2_OxygenOS_3.0_Beta/ got official marshmallow.
cheers!

Marshmallow is great.

Trafalgar Square said:
Marshmallow is great.
Click to expand...
Click to collapse
have u flashed it? share the video how exactly u flashed.

Follow this instruction to get marshmallow
Download the files required, ROM, RECOVERY, SUPERSU.
1) Goto recovery mode (obviously twrp recovery).
2) Clear (dalvic, system, data, cache) and not (internal).
3) Flash the ROM, then flash the RECOVERY by selecting "install image" and selecting "recovery".
4) Go back to main page of TWRP & Reboot and when it asks (system, recovery, fastboot), choose recovery.
Then you just wait, it will reboot back to the new TWRP (orange color).
5) Now flash the ROM once again. But before flashing, must clear cache again like in step 2.
6) Clear cache.
7) Reboot now. it takes approx 1mins and shows new bootanimation.
Now, when you get Marshmallow page, set everything up like in starting. Then
8) Flash SuperSU file via recovery to get root access.

Did Factory Reset in Custom Rom now i have a TWRP Bootloop. (Mediatek)

Hello Guys it´s me again. (i know im annoying )
Well, i did a Factory Reset in dotOS and it Rebooted into TWRP.
However, Normally a Phone would then Perform the Action in the Recovery but in this Case it did not do it. So i Reflashed the Rom.
After that it Rebooted into TWRP again. I Tried to Access the Bootloader with Vol Down + Power. That also Booted into TWRP. After that i Selected Bootloader in the TWRP Reboot Options. That Booted the Phone into the Mode where i Flashed the Recovery but it did not Give me the Options like META MODE, FACTORY MODE etc, when i tapped the Volume Buttons. Only a Black Background with White text Saying :
> FASTBOOT mode...
> device unlocked
I Tried to Restore my Stock TWRP Backup but that did not Solve the Issue. I also tried to Reflash dotOS but same issue.
What else Can i do to get this fixed ? I never had a Problem Like this on any Sony or Samsung Device i tinkered with. Thats why im asking that much.

@Marc_Xperia Do not forget to install no-verity-opt-encrypt zip file or simple disable *system verifier* in kernel ramdisk.

TheHitMan said:
@Marc_Xperia Do not forget to install no-verity-opt-encrypt zip file or simple disable *system verifier* in kernel ramdisk.
Click to expand...
Click to collapse
I Tried that but still no luck. Might Revert to stock and try it that why. If i can find the VCOM Driver...

Marc_Xperia said:
Hello Guys it´s me again. (i know im annoying )
Well, i did a Factory Reset in dotOS and it Rebooted into TWRP.
However, Normally a Phone would then Perform the Action in the Recovery but in this Case it did not do it. So i Reflashed the Rom.
After that it Rebooted into TWRP again. I Tried to Access the Bootloader with Vol Down + Power. That also Booted into TWRP. After that i Selected Bootloader in the TWRP Reboot Options. That Booted the Phone into the Mode where i Flashed the Recovery but it did not Give me the Options like META MODE, FACTORY MODE etc, when i tapped the Volume Buttons. Only a Black Background with White text Saying :
> FASTBOOT mode...
> device unlocked
I Tried to Restore my Stock TWRP Backup but that did not Solve the Issue. I also tried to Reflash dotOS but same issue.
What else Can i do to get this fixed ? I never had a Problem Like this on any Sony or Samsung Device i tinkered with. Thats why im asking that much.
Click to expand...
Click to collapse
It's very simple
-boot into recovery
-wipe
-advanced wipe
-clear / format cache & dalvik
-reboot _choose reboot recovery
-select mtp file transfer mode in twrp
-push LATEST* magisk zip
-push clean copy of dotOs
-then do FULL WIPE (all) but not your sd or internal sd/data
-install first dotOs zip
-install magisk zip
-wipe cache
-reboot
* If you fail check what is selected under the mount section & report back
If problem persists flash an older version of recovery using SPflashtools and then older version of dotOs with magisk
_do full wipe first
#some new recoveries had errors so make sure you are running ABSOLUTE latest or OLDEST version of twrp
# I haven't tried the last or latest version of dotOs yes ( older versions worked 100%)

KevMetal said:
It's very simple
-boot into recovery
-wipe
-advanced wipe
-clear / format cache & dalvik
-reboot _choose reboot recovery
-select mtp file transfer mode in twrp
-push LATEST* magisk zip
-push clean copy of dotOs
-then do FULL WIPE (all) but not your sd or internal sd/data
-install first dotOs zip
-install magisk zip
-wipe cache
-reboot
* If you fail check what is selected under the mount section & report back
If problem persists flash an older version of recovery using SPflashtools and then older version of dotOs with magisk
_do full wipe first
#some new recoveries had errors so make sure you are running ABSOLUTE latest or OLDEST version of twrp
# I haven't tried the last or latest version of dotOs yes ( older versions worked 100%)
Click to expand...
Click to collapse
Do you have Some Links on the ABSOULTE latest or OLDEST Version of TWRP ? I dont trust the one i Have anymore.
I Used this one : https://androidfilehost.com/?fid=890129502657592740

Marc_Xperia said:
Do you have Some Links on the ABSOULTE latest or OLDEST Version of TWRP ? I dont trust the one i Have anymore.
I Used this one : https://androidfilehost.com/?fid=890129502657592740
Click to expand...
Click to collapse
Download this tool .
https://www.androidfilehost.com/?fid=817550096634801704
Extract the .rar
Inside the folder there is recovery by XNlogos with zero errors
This tool can also inject recovery using fastboot or unlock bootloader in automated manner & flash custom boot( with verity encrypt DISABLED)

Bootlooped after install of Lineage, twice!

Hey all,
Phone is new to me, t-mo version. Did the international conversion, unlocked the bootloader, installed TWRP 3.3.1.1.img. All with minimal issues. Installed the 20200121 nightly of LOS successfully, but it powered off a few minutes after getting through the setup menu. Bootlooped. I may have gotten it out of the bootloop with the vol up+down trick from the msmdownloadtool trick, or something, cause I got the screen to turn off and left it for the night.
Tonight, the phone was totally dead, but I was able to start over with the (patched) msmtool I used initially. All good. Went through the same steps and got TWRP and LOS installed. This time I used last nights nightly 20200123. All set for a minute, before it bootlooped again.
Here's some details that might be useful:
The phone powered off after unplugging it. This is when the bootloop started, I can't be sure it was after dissconnecting each time, but at least the last time. The battery was >80%. I also managed to get it to boot into LOS after the most recent bootloop, for a few minutes, and it powered off without being connected or disconnected. So probably not related.
I did a system wipe, along with the format, as recommended in the LOS installation steps from them
The system wipe maybe wasn't a good idea??
I tried to sideload LOS.zip, which seemed to work fine according to my terminal, but it warned me that I had no OS installed when I went to reboot. So I adb pushed LOS and installed. I got the same no OS warning, but rebooted anyway this time. LOS started up fine, for a few minutes, before powering off and then looping.
Could I have 2 instances conflicting??
Nothing else installed yet, not root, magisk, or anything yet.
I shut it down this time with a vol up + power, which worked. I'm done for tonight, but I would appreciate any ideas on what may be causing this so I can give it a third go tomorrow.
Thanks!

try this
BeansBeanson said:
Hey all,
Phone is new to me, t-mo version. Did the international conversion, unlocked the bootloader, installed TWRP 3.3.1.1.img. All with minimal issues. Installed the 20200121 nightly of LOS successfully, but it powered off a few minutes after getting through the setup menu. Bootlooped. I may have gotten it out of the bootloop with the vol up+down trick from the msmdownloadtool trick, or something, cause I got the screen to turn off and left it for the night.
Tonight, the phone was totally dead, but I was able to start over with the (patched) msmtool I used initially. All good. Went through the same steps and got TWRP and LOS installed. This time I used last nights nightly 20200123. All set for a minute, before it bootlooped again.
Here's some details that might be useful:
The phone powered off after unplugging it. This is when the bootloop started, I can't be sure it was after dissconnecting each time, but at least the last time. The battery was >80%. I also managed to get it to boot into LOS after the most recent bootloop, for a few minutes, and it powered off without being connected or disconnected. So probably not related.
I did a system wipe, along with the format, as recommended in the LOS installation steps from them
The system wipe maybe wasn't a good idea??
I tried to sideload LOS.zip, which seemed to work fine according to my terminal, but it warned me that I had no OS installed when I went to reboot. So I adb pushed LOS and installed. I got the same no OS warning, but rebooted anyway this time. LOS started up fine, for a few minutes, before powering off and then looping.
Could I have 2 instances conflicting??
Nothing else installed yet, not root, magisk, or anything yet.
I shut it down this time with a vol up + power, which worked. I'm done for tonight, but I would appreciate any ideas on what may be causing this so I can give it a third go tomorrow.
Thanks!
Click to expand...
Click to collapse
(BASE STOCK ROM)
OnePlus6TOxygen_41_OTA_063_all_2001032024_215eea3f e7c64e37.zip (BETA4)
whatever the rom requires(10.3.0) however the Q beta 4 works just fine, havent found any real bugs / newer security patches etc.
(CUSTOM ROM)
Latest rom that will work with BASE and TWRP decryption
(latest TWRP )
twrp 3.3.1-31 zip
(Latest)
Magisk Canary . Zip
(Latest)
open_gapps - Q
(Latest)
custom compatible kernel
(Latest)
NanoDroid - with con/fig read alter installation notes
(&)
India_Fake_Partition_Deleter
------------------- EASY-CLEAN-INSTALL (LONG BUT BULLETPROOF) -------------------
!(BACK UP STORAGE / U WILL LOSE DATA ETC.
ALL FILES ABOVE CAN BE SUBSTITUTED FOR ANY "IDEAL" ROM SETUP
CONFIGURATIONS YOU MAY PREFER., THESE ARE MYNE)!
------------------------------------------------------------------------------------------------
You only need any custom rom with the required BASE STOCK ROM and compatible TWRP version to decrypt storage, and of course, the latest magisk.
------------------------------------------------------------------------------------------------
From dirty or clean system - to - clean flash
in cmd type
fastboot boot twrp.img
Install twrp installer.
Mount all partitions / wipe / advanced / check all boxes & wipe all / format.
- - Reboot twrp - -
Mount all partitions / wipe / advanced / check all boxes & wipe all / format.
Reboot twrp
(DONT BE MOUNTING OR UNMOUNTING ANYTHING MANUALY ANYMORE!)
install OOS(BETA4).zip / TWRP installer
- - reboot recovery - -
install OOS(BETA4).zip / TWRP installer
- - reboot to recovery - -
Copy -
Magisk , TWRP & ROM to internal storage.
Format Data
Flash ROM
Flash TWRP installer
Reboot to recovery
Wipe Dalvik/ART Cache
Wipe Data
Flash Magisk.
Reboot system with your device unplugged to be safe (Device may reboot a couple times)
- - reboot to recovery - -
Copy -
Magisk , TWRP & ROM to internal storage.
Flash ROM
Flash TWRP installer
- - reboot to recovery - -
Flash Magisk
BOOT UP System
- - reboot back to recovery - -
Choose Reboot Option / (CHANGE YOUR SLOT) / Back / Reboot Recovery
Flash Magisk.
Reboot system
SETUP ROM
/////////////////////////////////////\OPTIONAL/\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
- - REBOOT TO RECOVERY - -
----------------------------------------------------------------------------------------------------
STEP *( .=./ )*
Flash GAPPS
Flash India_Fake_Partition_Deleter
Flash NanoDroid (With prefered pre-configured setup/overlay/apps files placed)
Flash Custom Kernel
Re-Flash Magisk again
Click - WIPE DALVIK & Reboot system right after
------------------------------------------------------------------------------------------------------
- - REBOOT TO RECOVERY - -
Choose Reboot (CHANGE YOUR SLOT TO THE OPPOSITE SLOT)
- - REBOOT BACK TO RECOVERY - -
REPEAT STEP " *( .=./ )* "
-------------------------------------------------------------------------------------------------
GAME OVER
1up
THIS is EXTENSIVE but will work for any particular rom setup for a/b devices based on Q
---------- Post added at 10:50 PM ---------- Previous post was at 10:47 PM ----------
just follow install guide download latest linageos and gapps from open gapps. and latest magisk and after flash gapps if you cannot sign into a google account then you need to factory reset both slot in system settings menu and then just reinstall magisk and kernel settings modules etc
---------- Post added at 10:52 PM ---------- Previous post was at 10:50 PM ----------
just switch slots in cmd or via twrp and reboot system and factory reset wipe all via the settings in the booted system, not twrp

I'm a little slow..
I got the phone back to factory with the msmtool, so I'm ready to do this! I get the general idea, but for a few of these, can you ELI5. Thanks so much for taking the time to help me out.
------------------- EASY-CLEAN-INSTALL (LONG BUT BULLETPROOF) -------------------
!(BACK UP STORAGE / U WILL LOSE DATA ETC.
ALL FILES ABOVE CAN BE SUBSTITUTED FOR ANY "IDEAL" ROM SETUP
CONFIGURATIONS YOU MAY PREFER., THESE ARE MYNE)!
------------------------------------------------------------------------------------------------
You only need any custom rom with the required BASE STOCK ROM and compatible TWRP version to decrypt storage, and of course, the latest magisk.
------------------------------------------------------------------------------------------------
From dirty or clean system - to - clean flash
in cmd type
fastboot boot twrp.img
Install twrp installer. Do I just find the zip in the file structure in twrp and install? I'm at this step in twrp and I don't see how to install it. Previously I had `adb push twrp.img /storage/` so that I had a file I could find and install. If it's already there just from `fastboot boot twrp.img`, I can't seem to find it.
--solved this by pushing the twrp-intaller.zip to /storage, and then installing. It did the expected installation to both a/b
Mount all partitions / wipe / advanced / check all boxes & wipe all / format.
- - Reboot twrp - -
I went to `mount` and checked all the boxes. Then went back to `wipe advanced` and checked all those boxes. Now I'm stuck at the fastboot screen and can't boot or start. :crying:
I can't do a `fastboot boot twrp.img either. Any suggestions before I blow it away with the msmtool again??????
Mount all partitions / wipe / advanced / check all boxes & wipe all / format.
Reboot twrp
(DONT BE MOUNTING OR UNMOUNTING ANYTHING MANUALY ANYMORE!) How was I doing it wrong? Or do you mean that these steps just now are the only mounting that should be done?
install OOS(BETA4).zip / TWRP installer What command should I use to move it from my pc to the phone? `adb push .zip storage` ?
- - reboot recovery - -
install OOS(BETA4).zip / TWRP installer Do it twice, exactly the same? Is this so it's on both slots?
- - reboot to recovery - -
Copy -
Magisk , TWRP & ROM to internal storage. What command should I use for copying? Like above `adb push <files> storage`?
Format Data
Flash ROM
Flash TWRP installer
Reboot to recovery
Wipe Dalvik/ART Cache
Wipe Data
Flash Magisk.
Reboot system with your device unplugged to be safe (Device may reboot a couple times)
- - reboot to recovery - -
Copy -
Magisk , TWRP & ROM to internal storage.
Flash ROM
[/COLOR]just follow install guide download latest linageos and gapps from open gapps. and latest magisk and after flash gapps if you cannot sign into a google account then you need to factory reset both slot in system settings menu and then just reinstall magisk and kernel settings modules etc
---------- Post added at 10:52 PM ---------- Previous post was at 10:50 PM ----------
just switch slots in cmd or via twrp and reboot system and factory reset wipe all via the settings in the booted system, not twrp
Not sure what you mean by this part here. I wasn't planning on installing gapps. I'm confused about the reseting both slots. Is the idea that I did the install twice above, so that it's on both a/b slots and I'd have to reset both if there's a problem?
Click to expand...
Click to collapse

How to install ANY CustomROM on OnePlus6T from OOS/CustomROM

So, I searched the internet for a method to flash a CustomROM on the OnePlus 6T. But somehow none of them worked, so I worked on one myself that at least works for me.
There are 2 methods, use Method A if you don't have a custom ROM installed and still use OxygenOS. Use Method B if you are using a custom ROM and want to have another one:
Method A: From OxygenOS to CustomROM
1. boot in twrp
2. in twrp, do a factory reset
3. flash latest oos zip(flashable ota, link will be below)
4. flash twrp installer zip(i recommend mauronofrio´s twrp, link wil be below)
5. check current slot, then reboot in twrp
6. check if slot changed, then do a factory reset
7. flash latest oos zip
8. flash twrp installer zip
9. reboot recovery, and check if slot changed
10. factory reset
11. flash custom rom zip
12. flash twrp installer zip
13. reboot twrp(check current slot)
14. check if slot changed(if yes:it worked, if no:repeat)
15. additional: flash magisk&gapps
then,your rom is ready to use
Method B: From Custom ROM to another Custom ROM
1. reboot to twrp
2. in twrp, do a factory reset
3. then select advanced wipe: wipe system,cache,data. DON’T WIPE VENDOR
4. flash custom rom zip
5. flash twrp installer zip
6. check which slot you´re in
7. reboot twrp
8. if slot changed, everything worked
9. flash gapps and magisk if you want
then, your rom is ready to use
So, I hope I have spared you many problems and wish you much fun with your Devices.
Links:
Mauronofrio TWRP: click here
OxygenOS Stable OTA 10.3.1: click here

DirtryElectro said:
So, I searched the internet for a method to flash a CustomROM on the OnePlus 6T. But somehow none of them worked, so I worked on one myself that at least works for me.
.......
Links:
Mauronofrio TWRP: click here
OxygenOS Stable OTA 10.3.1: click here
Very important note: Download the FULL OTA, not the local-upgrade OTA!
Click to expand...
Click to collapse
Some of those steps are unnecessary. Like doing a Factory Reset each time you boot to TWRP as that will mess up your Encryption. And in Method B, you mention to Wipe System. DO NOT UNDER ANY CIRCUMSTANCES WIPE SYSTEM ON THE 6T. IT WILL MESS UP YOUR DEVICE. This is the method I use to flash ROMs.
1. Boot to TWRP
2. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
3. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
4. Flash ROM + TWRP ,Format Data (Go to Wipe, in the lower right corner Format Data, type in 'YES' and hit Enter) -> Reboot to System
5. After first Boot, You can Reboot to Recovery & Flash Magisk (Optional).
These are for EvolutionX that has Gapps built-in so you don't need to flash Gapps. Otherwise you can Skip the Format Data after ROM flash in Step 4, Reboot to Recovery, Flash Gapps and then Format Data. I use these and they have worked flawlessly for me. Also when switching from one AOSP based ROM to another, it's generally recommended to flash OOS Before.

DarthVader said:
Some of those steps are unnecessary. Like doing a Factory Reset each time you boot to TWRP as that will mess up your Encryption. And in Method B, you mention to Wipe System. DO NOT UNDER ANY CIRCUMSTANCES WIPE SYSTEM ON THE 6T. IT WILL MESS UP YOUR DEVICE. This is the method I use to flash ROMs.
1. Boot to TWRP
2. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
3. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
4. Flash ROM + TWRP ,Format Data (Go to Wipe, in the lower right corner Format Data, type in 'YES' and hit Enter) -> Reboot to System
5. After first Boot, You can Reboot to Recovery & Flash Magisk (Optional).
These are for EvolutionX that has Gapps built-in so you don't need to flash Gapps. Otherwise you can Skip the Format Data after ROM flash in Step 4, Reboot to Recovery, Flash Gapps and then Format Data. I use these and they have worked flawlessly for me. Also when switching from one AOSP based ROM to another, it's generally recommended to flash OOS Before.
Click to expand...
Click to collapse
these are just the steps which worked for me, but ok

DarthVader said:
Some of those steps are unnecessary. Like doing a Factory Reset each time you boot to TWRP as that will mess up your Encryption. And in Method B, you mention to Wipe System. DO NOT UNDER ANY CIRCUMSTANCES WIPE SYSTEM ON THE 6T. IT WILL MESS UP YOUR DEVICE. This is the method I use to flash ROMs.
1. Boot to TWRP
2. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
3. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
4. Flash ROM + TWRP ,Format Data (Go to Wipe, in the lower right corner Format Data, type in 'YES' and hit Enter) -> Reboot to System
5. After first Boot, You can Reboot to Recovery & Flash Magisk (Optional).
These are for EvolutionX that has Gapps built-in so you don't need to flash Gapps. Otherwise you can Skip the Format Data after ROM flash in Step 4, Reboot to Recovery, Flash Gapps and then Format Data. I use these and they have worked flawlessly for me. Also when switching from one AOSP based ROM to another, it's generally recommended to flash OOS Before.
Click to expand...
Click to collapse
this helped me greatly! following the instructions above had my files corrupt when id factory reset. i dont have an otg usb. so the instructions above kind of troubled me. again, thank you!

Beefybeardedbear said:
this helped me greatly! following the instructions above from OP had my files corrupt when id factory reset. i dont have an otg usb. so the instructions from OP kind of troubled me. again, thank you!
Click to expand...
Click to collapse