Related
I have reverted back to MIUI 8(8.0.3 malmidg),for some reasons,but I was unable to install the OTA for 8.0.8.0 via twrp.so I mounted the system part read only in twrp and installed mi land recovery available in mi forum...Now when I am installing OTA it shows "Installing MIUI update",but nothing updates.Pls help me to solve this problem..any one here with same problem??pls reply how you recovered..Thanx.
yea for some reason installing OTA's even with fireflash is a issue, id like to install otas on my stock miui v8 weekly with root and unlocked BL
first, you should have 2 things:
1. Stock recovery.img, (taken from fastboot rom)
2. Stock Rom (Stable/ Dev)
How To:
1. Copy it to internal storage
2. Go to TWRP, wipe system, data, cache, and dalvik/art cache.
3. Flash Stock Rom and then reboot.
4. @ home, reboot to recovery again (go to updater app to do this), after on TWRP, flash stock recovery, then reboot again to system.
5. @ home, goes to updater, flash again stock rom with it. (open option, choose choose update package)
6. Well, you should have OTA right now.
It works on mine.
Redmi 3x, China Dev 6.11.17
gandrigoes said:
first, you should have 2 things:
1. Stock recovery.img, (taken from fastboot rom)
2. Stock Rom (Stable/ Dev)
How To:
1. Copy it to internal storage
2. Go to TWRP, wipe system, data, cache, and dalvik/art cache.
3. Flash Stock Rom and then reboot.
4. @ home, reboot to recovery again (go to updater app to do this), after on TWRP, flash stock recovery, then reboot again to system.
5. @ home, goes to updater, flash again stock rom with it. (open option, choose choose update package)
6. Well, you should have OTA right now.
It works on mine.
Redmi 3x, China Dev 6.11.17
Click to expand...
Click to collapse
many thanks for this info. I have been searching for this proper steps. will this this process re lock bootloader? what if I want twrp back as recovery? what to do then?
nafeesdipta said:
many thanks for this info. I have been searching for this proper steps. will this this process re lock bootloader? what if I want twrp back as recovery? what to do then?
Click to expand...
Click to collapse
Once you unlock the bootloader, it stays unlocked. I've switched back and forth between MIUI, CM13 and RR but my bootloader was never locked.
nafeesdipta said:
many thanks for this info. I have been searching for this proper steps. will this this process re lock bootloader? what if I want twrp back as recovery? what to do then?
Click to expand...
Click to collapse
Better stay at china dev, it has native root. So if you want to get twrp, root, than flash twrp.img via flashify.
Or, if on global/stable, flash twrp via fastboot
Sent from my Redmi 3X using Tapatalk
Hello Guys it´s me again. (i know im annoying )
Well, i did a Factory Reset in dotOS and it Rebooted into TWRP.
However, Normally a Phone would then Perform the Action in the Recovery but in this Case it did not do it. So i Reflashed the Rom.
After that it Rebooted into TWRP again. I Tried to Access the Bootloader with Vol Down + Power. That also Booted into TWRP. After that i Selected Bootloader in the TWRP Reboot Options. That Booted the Phone into the Mode where i Flashed the Recovery but it did not Give me the Options like META MODE, FACTORY MODE etc, when i tapped the Volume Buttons. Only a Black Background with White text Saying :
> FASTBOOT mode...
> device unlocked
I Tried to Restore my Stock TWRP Backup but that did not Solve the Issue. I also tried to Reflash dotOS but same issue.
What else Can i do to get this fixed ? I never had a Problem Like this on any Sony or Samsung Device i tinkered with. Thats why im asking that much.
@Marc_Xperia Do not forget to install no-verity-opt-encrypt zip file or simple disable *system verifier* in kernel ramdisk.
TheHitMan said:
@Marc_Xperia Do not forget to install no-verity-opt-encrypt zip file or simple disable *system verifier* in kernel ramdisk.
Click to expand...
Click to collapse
I Tried that but still no luck. Might Revert to stock and try it that why. If i can find the VCOM Driver...
Marc_Xperia said:
Hello Guys it´s me again. (i know im annoying )
Well, i did a Factory Reset in dotOS and it Rebooted into TWRP.
However, Normally a Phone would then Perform the Action in the Recovery but in this Case it did not do it. So i Reflashed the Rom.
After that it Rebooted into TWRP again. I Tried to Access the Bootloader with Vol Down + Power. That also Booted into TWRP. After that i Selected Bootloader in the TWRP Reboot Options. That Booted the Phone into the Mode where i Flashed the Recovery but it did not Give me the Options like META MODE, FACTORY MODE etc, when i tapped the Volume Buttons. Only a Black Background with White text Saying :
> FASTBOOT mode...
> device unlocked
I Tried to Restore my Stock TWRP Backup but that did not Solve the Issue. I also tried to Reflash dotOS but same issue.
What else Can i do to get this fixed ? I never had a Problem Like this on any Sony or Samsung Device i tinkered with. Thats why im asking that much.
Click to expand...
Click to collapse
It's very simple
-boot into recovery
-wipe
-advanced wipe
-clear / format cache & dalvik
-reboot _choose reboot recovery
-select mtp file transfer mode in twrp
-push LATEST* magisk zip
-push clean copy of dotOs
-then do FULL WIPE (all) but not your sd or internal sd/data
-install first dotOs zip
-install magisk zip
-wipe cache
-reboot
* If you fail check what is selected under the mount section & report back
If problem persists flash an older version of recovery using SPflashtools and then older version of dotOs with magisk
_do full wipe first
#some new recoveries had errors so make sure you are running ABSOLUTE latest or OLDEST version of twrp
# I haven't tried the last or latest version of dotOs yes ( older versions worked 100%)
KevMetal said:
It's very simple
-boot into recovery
-wipe
-advanced wipe
-clear / format cache & dalvik
-reboot _choose reboot recovery
-select mtp file transfer mode in twrp
-push LATEST* magisk zip
-push clean copy of dotOs
-then do FULL WIPE (all) but not your sd or internal sd/data
-install first dotOs zip
-install magisk zip
-wipe cache
-reboot
* If you fail check what is selected under the mount section & report back
If problem persists flash an older version of recovery using SPflashtools and then older version of dotOs with magisk
_do full wipe first
#some new recoveries had errors so make sure you are running ABSOLUTE latest or OLDEST version of twrp
# I haven't tried the last or latest version of dotOs yes ( older versions worked 100%)
Click to expand...
Click to collapse
Do you have Some Links on the ABSOULTE latest or OLDEST Version of TWRP ? I dont trust the one i Have anymore.
I Used this one : https://androidfilehost.com/?fid=890129502657592740
Marc_Xperia said:
Do you have Some Links on the ABSOULTE latest or OLDEST Version of TWRP ? I dont trust the one i Have anymore.
I Used this one : https://androidfilehost.com/?fid=890129502657592740
Click to expand...
Click to collapse
Download this tool .
https://www.androidfilehost.com/?fid=817550096634801704
Extract the .rar
Inside the folder there is recovery by XNlogos with zero errors
This tool can also inject recovery using fastboot or unlock bootloader in automated manner & flash custom boot( with verity encrypt DISABLED)
I've got a SM-G950F, and succesfully flashed TWRP on it.
Wiped /data, after that i flashed dm-verity and force encryption disabler, everything was ok until the first boot into the system.
It booted up, and immediately after that i turned off the phone and booted into TWRP, and for some reason it couldnt mount /data again.
The tutorial i have followed:
Thanks for the tutorial to: jesec
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.
Click to expand...
Click to collapse
Before the 1st boot i even rooted the device, that remained after the first boot, but no /data mount.
After the 5th try, i gave up.
What could be the problem, or is this normal on this phone?
Are you using latest twrp version 3.2.3.2
I'm using 3.2.1.0
kristof889 said:
I'm using 3.2.1.0
Click to expand...
Click to collapse
Use latest twrp 3.2.3.2 should have data mount and quota issues fixed.
You can flash the .Img file through twrp or flash the .img.tar file with Odin.
After flashing reboot straight into twrp and repeat part 2 of the guide you quoted.
I would be interested to know also if in download mode if you have a line in there saying rmm state?
Twrp for s8 exynos
https://dl.twrp.me/dreamlte/
Installed the 3.2.3.2 version, but nothing has changed. after the first boot into system, TWRP says cant mount /data..
I dont have anything like rmm state in download mode.
kristof889 said:
Installed the 3.2.3.2 version, but nothing has changed. after the first boot into system, TWRP says cant mount /data..
I dont have anything like rmm state in download mode.
Click to expand...
Click to collapse
I am assuming you followed the instructions that you quoted in your first post.(mainly part 2) after flashing twrp
Did you format data in twrp - not wipe - this is needed to decrypt your phone.
Rebooted back into twrp.
Did you flash the no verity opt zip (version 6) - this will disable re encryption of your phone when booting back into system.
This should all be done before booting back into system otherwise your phone will re encrypt itself.
I am assuming you followed the instructions that you quoted in your first post.(mainly part 2) after flashing twrp
Did you format data in twrp - not wipe - this is needed to decrypt your phone.
Rebooted back into twrp.
Did you flash the no verity opt zip (version 6) - this will disable re encryption of your phone when booting back into system.
This should all be done before booting back into system otherwise your phone will re encrypt itself.
Click to expand...
Click to collapse
I formatted data, not just wiped it.
I have installed the no verity opt, the latest version.
Even after these, my phone reencrypted itself.
kristof889 said:
I formatted data, not just wiped it.
I have installed the no verity opt, the latest version.
Even after these, my phone reencrypted itself.
Click to expand...
Click to collapse
When do the errors occur ie: during backup,restore,flashing something.
When first starting twrp did you swipe to allow modifications or did you leave it as read only.
You mean, the data mount error?
If yes, immediately after the 2nd boot into TWRP, after the first boot into system. Before i do anything in twrp, i check the log (with the button on the lower right) and it creates a bunch of errors, all in contact with the data partition.
So i can even do a proper backup.
If i flash any zip, upon the next boot into system it says something like verify failed, cannot reboot your phone and it gives a button wich used to restore the phone from recovery, but now i cant even do that bcoz it cant mount /data and thus can restore the phone.
kristof889 said:
You mean, the data mount error?
If yes, immediately after the 2nd boot into TWRP, after the first boot into system. Before i do anything in twrp, i check the log (with the button on the lower right) and it creates a bunch of errors, all in contact with the data partition.
So i can even do a proper backup.
If i flash any zip, upon the next boot into system it says something like verify failed, cannot reboot your phone and it gives a button wich used to restore the phone from recovery, but now i cant even do that bcoz it cant mount /data and thus can restore the phone.
Click to expand...
Click to collapse
Still sounds like you device is still encrypted.
Doing a factory reset with twrp should work to restore your phone or at worst you can re-flash your firmware.
If you can in twrp FORMAT data again and flash the no verity zip use version 6 zip file
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
I would be curious to know in twrp in the mount menu what options are ticked as well.
After the fresh flash, it was not encrypted because i could access the internal storage, and data was mounted.
Now in TWRP system(read only), cache and dalvik is mounted, and internal storage says 0MB
kristof889 said:
After the fresh flash, it was not encrypted because i could access the internal storage, and data was mounted.
Now in TWRP system(read only), cache and dalvik is mounted, and internal storage says 0MB
Click to expand...
Click to collapse
What Android version are you on?
When you flashed twrp it should have asked you whether or not to ' swipe to allow modifications ' did you swipe to allow or not.
In the mount menu of twrp I have ticked/checked data,cache,SD card the option at the bottom to allow read only I have ticked - this does not stop me from doing backups but does stop me from restoring (data mount error ) so you can leave it unticked.
I would.like to know your steps for twrp installation (not the one you quoted in first post) as I screwed up when I first tried.
I attached the software information bellow.
I have not swiped to allow for system modifications
First steps were the followimg:
Install .tra with odin
Immediately reboot to twrp
No swipe for system modifications
Format data
Flash no dm verity v6
(Flash magisk)
Reboot to system
kristof889 said:
First steps were the followimg:
Install .tra with odin
Immediately reboot to twrp
No swipe for system modifications
Format data
Flash no dm verity v6
(Flash magisk)
Reboot to system
Click to expand...
Click to collapse
Ok basically you have missed a step as far as I can see
(When I did mine I did swipe to allow modifications )
After you have formated data you will need to reboot back into twrp ( use reboot menu in twrp )
Then flash the no verity zip and magisk
If using magisk I would try the latest version 18 it's working ok for me.
Then boot into system to see if everything ok
Then reboot into twrp and see if the data mount issue is fixed.
spawnlives said:
Ok basically you have missed a step as far as I can see
(When I did mine I did swipe to allow modifications )
After you have formated data you will need to reboot back into twrp ( use reboot menu in twrp )
Then flash the no verity zip and magisk
If using magisk I would try the latest version 18 it's working ok for me.
Then boot into system to see if everything ok
Then reboot into twrp and see if the data mount issue is fixed.
Click to expand...
Click to collapse
Thank you for your advice. I will try it in the following days and will post the result.
I fixed this by flashing Renovate ICE's ROM and selecting the TWRP included in the AROMA installer.
Can access storage on TWRP now with no issues.
CoreyOS said:
I fixed this by flashing Renovate ICE's ROM and selecting the TWRP included in the AROMA installer.
Can access storage on TWRP now with no issues.
Click to expand...
Click to collapse
But i want to use the stock rom.
Maybe if i flash Renovate rom and after that again the stock?
kristof889 said:
But i want to use the stock rom.
Maybe if i flash Renovate rom and after that again the stock?
Click to expand...
Click to collapse
Why stock???
It pretty much is stock, just you have full control over the apps preinstalled and you can change colours of various UI elements.
It's just easier to flash a zip than it is to flash via ODIN, then flash TWRP and keep trying over and over to get this result when I know this rom works fine with CTSprofile.
You will only need to flash TWRP once and copy the rom to your phone.
The rest is magic (AROMA)
I haven't really had to mess with anything and have just installed and used the HSBC banking app as if it were an official phone. (ROOTED and custom ROM and Recovery)
One extra step you could take is to use Magisk hide and point it to the app you want to hide root from.
CoreyOS said:
Why stock???
It pretty much is stock, just you have full control over the apps preinstalled and you can change colours of various UI elements.
It's just easier to flash a zip than it is to flash via ODIN, then flash TWRP and keep trying over and over to get this result when I know this rom works fine with CTSprofile.
You will only need to flash TWRP once and copy the rom to your phone.
The rest is magic (AROMA)
I haven't really had to mess with anything and have just installed and used the HSBC banking app as if it were an official phone. (ROOTED and custom ROM and Recovery)
One extra step you could take is to use Magisk hide and point it to the app you want to hide root from.
Click to expand...
Click to collapse
So on that rom i can use s health and all knox based apps like normal?
If yes, i will try it, it looks very nice
From 6T (purchased from oneplus.com), any time I follow the instructions for how to flash one of the custom ROMs, I get stuck at the bootloader with no working rom.
I was able to use the MSMTool to restore to 9.0.13. I upgraded a few times flashing OnePlus6TOxygen_34_OTA_024_all_1909112343_9fd6e0057b8747dc, which works, but when I try to flash a custom ROM, I cannot get past the bootloader. I say a few times because I've tried this for a few days now with no success.
Most recently, I used the Flash-all.bat inside 10.3.0-OnePlus6TOxygen_34_OTA_042_all_1912142031_d9ef3-FASTBOOT
I am currently on 10.3.0, with twrp-3.3.1-31-fajita-Q-mauronofrio installed using the fastboot flash boot_a twrp-3.3.1-31-fajita-Q-mauronofrio.img then fastboot boottwrp-3.3.1-31-fajita-Q-mauronofrio.img commands from fastboot.
I can then install Magisk 19.4 or 20.3, however again when I try to flash a custom ROM, I cannot get past the bootloader.
What am I doing wrong?
When you 'fastboot boot' twrp, you can't flash twrp as .img file after that..... (There is no recovery partition on our phone, only a boot one)
If you flash a twrp img it will overwrite boot partition with only twrp and no kernel... Basic knowledge. Once temporarily booted in twrp by 'fastboot boot' command you must flash the installer, meaning the .zip file.
Then reboot your phone in twrp and flash whatever you want
Always latest versions of Magisk, why flashing a deprecated 19.4?
Striatum_bdr said:
When you 'fastboot boot' twrp, you can't flash twrp as .img file after that..... (There is no recovery partition on our phone, only a boot one)
If you flash a twrp img it will overwrite boot partition with only twrp and no kernel... Basic knowledge. Once temporarily booted in twrp by 'fastboot boot' command you must flash the installer, meaning the .zip file.
Then reboot your phone in twrp and flash whatever you want
Always latest versions of Magisk, why flashing a deprecated 19.4?
Click to expand...
Click to collapse
I was having an issue with the boot command in 10.3.0, which is how I found the flash command, and using both of those seemed to work (at least get me into twrp).
Now I am able to just run fastboot boot twrp-3.3.1-31-fajita-Q-mauronofrio.img and it works.
I was using 19.4 because somewhere in here someone mention twrp not working with magisk 20.3.
I've had no issues with 20.3 and twrp, so I will continue to use 20.3
The steps I use to flash a custom ROM (after twrp is installed)
1. remove the lock screen security from the existing ROM
2. boot straight into recovery from the existing ROM
3. wipe Data, Cache, and Dalvik by swiping right to factory reset from the wipe menu
4. flash the ROM from internal storage using the Install button
at this point I've tried a couple of approaches including a reboot here to see if the ROM flashed, and also installing twrp right after flashing ROM so that I will have a working twrp install.
Either way, I can never get past the bootloader.
Am I performing these steps correctly?
s7itch3s said:
I was having an issue with the boot command in 10.3.0, which is how I found the flash command, and using both of those seemed to work (at least get me into twrp).
Now I am able to just run fastboot boot twrp-3.3.1-31-fajita-Q-mauronofrio.img and it works.
I was using 19.4 because somewhere in here someone mention twrp not working with magisk 20.3.
I've had no issues with 20.3 and twrp, so I will continue to use 20.3
The steps I use to flash a custom ROM (after twrp is installed)
1. remove the lock screen security from the existing ROM
2. boot straight into recovery from the existing ROM
3. wipe Data, Cache, and Dalvik by swiping right to factory reset from the wipe menu
4. flash the ROM from internal storage using the Install button
at this point I've tried a couple of approaches including a reboot here to see if the ROM flashed, and also installing twrp right after flashing ROM so that I will have a working twrp install.
Either way, I can never get past the bootloader.
Am I performing these steps correctly?
Click to expand...
Click to collapse
I don't know I don't flash custom ROMs anymore, too old for that stuff and need my time for me.
There are specific instructions for each custom ROM it's better to ask in dedicated threads, some of them need to have OOS in both slots before, some of them need to be fleshed in both slots. Normally you eventually wipe things, flash the ROM and twrp to keep it, then reboot to twrp (necessary to boot on the slot where the ROM is actually fleshed, which is always the non active slot, which become the new active slot) and flash Gapps and Magisk ( because Gapps and Magisk can be flashed only in active slot) then reboot system
s7itch3s said:
Am I performing these steps correctly?
Click to expand...
Click to collapse
I've updated these instructions here, they are the same, just added to them really.
This is how I install Lineage 17. (If you are doing 16, replace 10.3.0 with 9.0.17, and the Q image of TWRP with the Pie image)
- Install 10.3.0 fastboot ROM again to start over, boot it once. Just to make sure everything is good.
- Reboot to fastboot.
- Boot the Q image of TWRP.
- Run the TWRP installer, reboot to recovery
- You backed everything up right?
- Factory reset (This is the slider at the bottom in the wipe menu).
- Format data. (This is the button that says Format data in the wipe menu)
- Do NOT wipe cache, do not Wipe system, do NOT Wipe Dalvik / ART, do not add anything else, Just Factory Reset and Format Data. After doing those two Reboot to Recovery one more time. You must do this after formatting data.
- Now transfer Lineage and TWRP to your phone, Windows / Linux should see TWRP fine as a media device when plugged in.
- Install Lineage
- Run the TWRP Installer.
- Reboot to Recovery.
- Install Lineage (You need Lineage on both slots, so yes run it again)
- Run the TWRP Installer (yes again).
- Reboot to Recovery.
- Install Gapps if you want them.
- Install Magisk 20.3 if you use Magisk. I used 20.3 it works fine. (20.4 also fine) Do not install modules or other add ons at this point. Boot once and go through the setup and everything, then install your add-ons.
- Be aware the phone will restart once, then Lineage will start up and all will be good.
From that point on updating should just be like normal :
- Reboot to recovery
- Flash Lineage.
- Flash TWRP Installer
- Reboot to Recovery
- Flash Gapps. (Assuming you use them, if you installed them once you must continue to install them or do a clean install)
- Flash Magisk. (If you use it)
- Reboot to system.
- No loss of data, or anything.
- No need to flash anything twice etc.
I've posted similar instructions here. It was just for LOS 16, same thing essentially though.
OhioYJ said:
I've updated these instructions here, they are the same, just added to them really.
This is how I install Lineage 17. (If you are doing 16, replace 10.3.0 with 9.0.17, and the Q image of TWRP with the Pie image)
- Install 10.3.0 fastboot ROM again to start over, boot it once. Just to make sure everything is good.
- Reboot to fastboot.
- Boot the Q image of TWRP.
- Run the TWRP installer, reboot to recovery
- You backed everything up right?
- Factory reset (This is the slider at the bottom in the wipe menu).
- Format data. (This is the button that says Format data in the wipe menu)
- Do NOT wipe cache, do not Wipe system, do NOT Wipe Dalvik / ART, do not add anything else, Just Factory Reset and Format Data. After doing those two Reboot to Recovery one more time. You must do this after formatting data.
- Now transfer Lineage and TWRP to your phone, Windows / Linux should see TWRP fine as a media device when plugged in.
- Install Lineage
- Run the TWRP Installer.
- Reboot to Recovery.
- Install Lineage (You need Lineage on both slots, so yes run it again)
- Run the TWRP Installer (yes again).
- Reboot to Recovery.
- Install Gapps if you want them.
- Install Magisk 20.3 if you use Magisk. I used 20.3 it works fine. (20.4 also fine) Do not install modules or other add ons at this point. Boot once and go through the setup and everything, then install your add-ons.
- Be aware the phone will restart once, then Lineage will start up and all will be good.
From that point on updating should just be like normal :
- Reboot to recovery
- Flash Lineage.
- Flash TWRP Installer
- Reboot to Recovery
- Flash Gapps. (Assuming you use them, if you installed them once you must continue to install them or do a clean install)
- Flash Magisk. (If you use it)
- Reboot to system.
- No loss of data, or anything.
- No need to flash anything twice etc.
I've posted similar instructions here. It was just for LOS 16, same thing essentially though.
Click to expand...
Click to collapse
Sir, apology for being an old noob, I am on OOS 10.3.2 TWRP 3.3.1-32 can I follow the above guide? If Yes,
Why aren't we using the "Lineage Recovery" provided in "Lineage OS Downloads" page?? If we use it, will the above instructions change ? What are the cons of using it?
Sorry again for asking!! Can you please share me the Link to Open Gapps which Will be suitable in my scenario ?
Advised Sloth said:
Sir, apology for being an old noob, I am on OOS 10.3.2 TWRP 3.3.1-32 can I follow the above guide? If Yes,
Why aren't we using the "Lineage Recovery" provided in "Lineage OS Downloads" page?? If we use it, will the above instructions change ? What are the cons of using it?
Sorry again for asking!! Can you please share me the Link to Open Gapps which Will be suitable in my scenario ?
Click to expand...
Click to collapse
Historically Lineage / CM recovery was hit or miss, or TWRP or other recoverys worked better. To be fair I haven't even tried the Lineage recovery. So maybe that is no longer true? Right now, I know TWRP works. The updated instructions link up there has links in it, FYI, link OpenGapps. OpenGapps can be found here. You will be using Arm64, Android 10 obviously.
Since you are already on 10.3.2 (I assume you were on 10.3.1 before) you should be good to skip the step about fastboot ROM or install OOS, and you already have TWRP., so you should be able to go right on to backing everything up, wiping everything, and installing Lineage. (So you can skip the first few steps)
Anymore questions feel free to ask.
OhioYJ said:
Historically Lineage / CM recovery was hit or miss, or TWRP or other recoverys worked better. To be fair I haven't even tried the Lineage recovery. So maybe that is no longer true? Right now, I know TWRP works. The updated instructions link up there has links in it, FYI, link OpenGapps. OpenGapps can be found here. You will be using Arm64, Android 10 obviously.
Since you are already on 10.3.2 (I assume you were on 10.3.1 before) you should be good to skip the step about fastboot ROM or install OOS, and you already have TWRP., so you should be able to go right on to backing everything up, wiping everything, and installing Lineage. (So you can skip the first few steps)
Anymore questions feel free to ask.
Click to expand...
Click to collapse
First of all, thank you very much for your time and explanation.
Sir, so i will proceed as follows:
* Boot into TWRP Recovery
* Perform "swipe to factory reset" & "swipe to wipe data"
* Reboot to TWRP recovery again
* Flash LOS 17.1 on slot A
* Reboot to TWRP recovery again
* Flash LOS 17.1 on slot B
* Reboot to system
Sir, please check are my steps correct? If not,
From which step( steps mentioned in your guide) should i start?
Last query is, which GApps zip will be best for me, micro/nano/pico/tv stock, If i want max coverage of google?
Very sorry for knocking you repeatedly!!!
Advised Sloth said:
First of all, thank you very much for your time and explanation.
Last query is, which GApps zip will be best for me, micro/nano/pico/tv stock, If i want max coverage of google?
Click to expand...
Click to collapse
Your starting point is correct. However make sure you don't miss the re-install TWRP after flashing Lineage each time, and the second time you need to flash Gapps before you reboot to system.
Personally I always do Nano. Anything else you need (that would be included in Micro) can be installed from the Play store. Nano at least includes all the things that can't be installed from the play store.
Pico has the least in it. TV is for TV devices. On OpenGapps there is a box next to each package you can click and it will tell you exactly what is in each package.
OhioYJ said:
I've updated these instructions here, they are the same, just added to them really.
This is how I install Lineage 17. (If you are doing 16, replace 10.3.0 with 9.0.17, and the Q image of TWRP with the Pie image)
- Install 10.3.0 fastboot ROM again to start over, boot it once. Just to make sure everything is good.
- Reboot to fastboot.
- Boot the Q image of TWRP.
- Run the TWRP installer, reboot to recovery
- You backed everything up right?
- Factory reset (This is the slider at the bottom in the wipe menu).
- Format data. (This is the button that says Format data in the wipe menu)
- Do NOT wipe cache, do not Wipe system, do NOT Wipe Dalvik / ART, do not add anything else, Just Factory Reset and Format Data. After doing those two Reboot to Recovery one more time. You must do this after formatting data.
- Now transfer Lineage and TWRP to your phone, Windows / Linux should see TWRP fine as a media device when plugged in.
- Install Lineage
- Run the TWRP Installer.
- Reboot to Recovery.
- Install Lineage (You need Lineage on both slots, so yes run it again)
- Run the TWRP Installer (yes again).
- Reboot to Recovery.
- Install Gapps if you want them.
- Install Magisk 20.3 if you use Magisk. I used 20.3 it works fine. (20.4 also fine) Do not install modules or other add ons at this point. Boot once and go through the setup and everything, then install your add-ons.
- Be aware the phone will restart once, then Lineage will start up and all will be good.
From that point on updating should just be like normal :
- Reboot to recovery
- Flash Lineage.
- Flash TWRP Installer
- Reboot to Recovery
- Flash Gapps. (Assuming you use them, if you installed them once you must continue to install them or do a clean install)
- Flash Magisk. (If you use it)
- Reboot to system.
- No loss of data, or anything.
- No need to flash anything twice etc.
I've posted similar instructions here. It was just for LOS 16, same thing essentially though.
Click to expand...
Click to collapse
Sorry for the necropost, but this also works for TWRP 3.6 and Lineage 18.1. I initially had a problem with the default TWRP for my 6t. During the initial TWRP fastboot the version on their site caused a firmware error which I could just barely get out of, but it screwed up the system boot process in some subtle way that even the fixed version of TWRP (found on this site) couldn't solve.
After trying your instructions above, it didn't work the first time because of the screwed up system boot. It just kept trying to boot to recovery. I suspected a firmware error and was almost going to do an mcmdownload soft-brick rescue. I tried one last thing, using the TWRP on the system to sideload the stock ROM. That worked and patched up the system boot process. Once I booted and ran through some basic initialization to make sure developer options were properly set I followed the above instructions and it worked nearly flawlessly.
One strange thing. After I installed Lineage 18.1 and TWRP to both partitions (as well as Gapps / magisk), it rebooted to system and almost booted without incident -- except a large circular logo popped up that said 100% and stopped. I figured that that meant someting completed properly, so I powered off, waited 10 seconds, powered on and then the Lineage green system initialization spinner came up for a few minutes and it went through the user initialization sequence.
Thanks. I almost gave up and bought a new phone.
OhioYJ said:
I've updated these instructions here, they are the same, just added to them really.
This is how I install Lineage 17. (If you are doing 16, replace 10.3.0 with 9.0.17, and the Q image of TWRP with the Pie image)
- Install 10.3.0 fastboot ROM again to start over, boot it once. Just to make sure everything is good.
- Reboot to fastboot.
- Boot the Q image of TWRP.
- Run the TWRP installer, reboot to recovery
- You backed everything up right?
- Factory reset (This is the slider at the bottom in the wipe menu).
- Format data. (This is the button that says Format data in the wipe menu)
- Do NOT wipe cache, do not Wipe system, do NOT Wipe Dalvik / ART, do not add anything else, Just Factory Reset and Format Data. After doing those two Reboot to Recovery one more time. You must do this after formatting data.
- Now transfer Lineage and TWRP to your phone, Windows / Linux should see TWRP fine as a media device when plugged in.
- Install Lineage
- Run the TWRP Installer.
- Reboot to Recovery.
- Install Lineage (You need Lineage on both slots, so yes run it again)
- Run the TWRP Installer (yes again).
- Reboot to Recovery.
- Install Gapps if you want them.
- Install Magisk 20.3 if you use Magisk. I used 20.3 it works fine. (20.4 also fine) Do not install modules or other add ons at this point. Boot once and go through the setup and everything, then install your add-ons.
- Be aware the phone will restart once, then Lineage will start up and all will be good.
From that point on updating should just be like normal :
- Reboot to recovery
- Flash Lineage.
- Flash TWRP Installer
- Reboot to Recovery
- Flash Gapps. (Assuming you use them, if you installed them once you must continue to install them or do a clean install)
- Flash Magisk. (If you use it)
- Reboot to system.
- No loss of data, or anything.
- No need to flash anything twice etc.
I've posted similar instructions here. It was just for LOS 16, same thing essentially though.
Click to expand...
Click to collapse
OhioYJ, these are great instructions but it initially left me with questions about how that procedures would create duplicate installs on slot A and B. The answer is of course that the Lineage installer for the 6t knows about the dual slot setup and always writes to the inactive slot. Booting into recovery activates the inactive slot so that installing again after that installs to the other slot and now you have Lineage on both slots. The installer for TWRP always installs to both slots and is needed because Lineage always installs its recovery handler and you don't want that so you overwrite.
PS: TWRP has an option for installing itself after installing the requested package. Would that be just as good as installing the TWRP zip?
PPS: I had to do an 'adb push' of the Lineage and TWRP zips to sdcard for the installs. Unfortunately installing and slot switching makes the sdcard unavailable so you have to push the zips again. Is there somewhere I can write them to that I don't lose access to after a boot to recovery?
So, I searched the internet for a method to flash a CustomROM on the OnePlus 6T. But somehow none of them worked, so I worked on one myself that at least works for me.
There are 2 methods, use Method A if you don't have a custom ROM installed and still use OxygenOS. Use Method B if you are using a custom ROM and want to have another one:
Method A: From OxygenOS to CustomROM
1. boot in twrp
2. in twrp, do a factory reset
3. flash latest oos zip(flashable ota, link will be below)
4. flash twrp installer zip(i recommend mauronofrio´s twrp, link wil be below)
5. check current slot, then reboot in twrp
6. check if slot changed, then do a factory reset
7. flash latest oos zip
8. flash twrp installer zip
9. reboot recovery, and check if slot changed
10. factory reset
11. flash custom rom zip
12. flash twrp installer zip
13. reboot twrp(check current slot)
14. check if slot changed(if yes:it worked, if no:repeat)
15. additional: flash magisk&gapps
then,your rom is ready to use
Method B: From Custom ROM to another Custom ROM
1. reboot to twrp
2. in twrp, do a factory reset
3. then select advanced wipe: wipe system,cache,data. DON’T WIPE VENDOR
4. flash custom rom zip
5. flash twrp installer zip
6. check which slot you´re in
7. reboot twrp
8. if slot changed, everything worked
9. flash gapps and magisk if you want
then, your rom is ready to use
So, I hope I have spared you many problems and wish you much fun with your Devices.
Links:
Mauronofrio TWRP: click here
OxygenOS Stable OTA 10.3.1: click here
DirtryElectro said:
So, I searched the internet for a method to flash a CustomROM on the OnePlus 6T. But somehow none of them worked, so I worked on one myself that at least works for me.
.......
Links:
Mauronofrio TWRP: click here
OxygenOS Stable OTA 10.3.1: click here
Very important note: Download the FULL OTA, not the local-upgrade OTA!
Click to expand...
Click to collapse
Some of those steps are unnecessary. Like doing a Factory Reset each time you boot to TWRP as that will mess up your Encryption. And in Method B, you mention to Wipe System. DO NOT UNDER ANY CIRCUMSTANCES WIPE SYSTEM ON THE 6T. IT WILL MESS UP YOUR DEVICE. This is the method I use to flash ROMs.
1. Boot to TWRP
2. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
3. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
4. Flash ROM + TWRP ,Format Data (Go to Wipe, in the lower right corner Format Data, type in 'YES' and hit Enter) -> Reboot to System
5. After first Boot, You can Reboot to Recovery & Flash Magisk (Optional).
These are for EvolutionX that has Gapps built-in so you don't need to flash Gapps. Otherwise you can Skip the Format Data after ROM flash in Step 4, Reboot to Recovery, Flash Gapps and then Format Data. I use these and they have worked flawlessly for me. Also when switching from one AOSP based ROM to another, it's generally recommended to flash OOS Before.
DarthVader said:
Some of those steps are unnecessary. Like doing a Factory Reset each time you boot to TWRP as that will mess up your Encryption. And in Method B, you mention to Wipe System. DO NOT UNDER ANY CIRCUMSTANCES WIPE SYSTEM ON THE 6T. IT WILL MESS UP YOUR DEVICE. This is the method I use to flash ROMs.
1. Boot to TWRP
2. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
3. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
4. Flash ROM + TWRP ,Format Data (Go to Wipe, in the lower right corner Format Data, type in 'YES' and hit Enter) -> Reboot to System
5. After first Boot, You can Reboot to Recovery & Flash Magisk (Optional).
These are for EvolutionX that has Gapps built-in so you don't need to flash Gapps. Otherwise you can Skip the Format Data after ROM flash in Step 4, Reboot to Recovery, Flash Gapps and then Format Data. I use these and they have worked flawlessly for me. Also when switching from one AOSP based ROM to another, it's generally recommended to flash OOS Before.
Click to expand...
Click to collapse
these are just the steps which worked for me, but ok
DarthVader said:
Some of those steps are unnecessary. Like doing a Factory Reset each time you boot to TWRP as that will mess up your Encryption. And in Method B, you mention to Wipe System. DO NOT UNDER ANY CIRCUMSTANCES WIPE SYSTEM ON THE 6T. IT WILL MESS UP YOUR DEVICE. This is the method I use to flash ROMs.
1. Boot to TWRP
2. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
3. Flash the latest version of Stable OOS for your Device and latest TWRP Installer for your Device. -> Reboot to Recovery.
4. Flash ROM + TWRP ,Format Data (Go to Wipe, in the lower right corner Format Data, type in 'YES' and hit Enter) -> Reboot to System
5. After first Boot, You can Reboot to Recovery & Flash Magisk (Optional).
These are for EvolutionX that has Gapps built-in so you don't need to flash Gapps. Otherwise you can Skip the Format Data after ROM flash in Step 4, Reboot to Recovery, Flash Gapps and then Format Data. I use these and they have worked flawlessly for me. Also when switching from one AOSP based ROM to another, it's generally recommended to flash OOS Before.
Click to expand...
Click to collapse
this helped me greatly! following the instructions above had my files corrupt when id factory reset. i dont have an otg usb. so the instructions above kind of troubled me. again, thank you!
Beefybeardedbear said:
this helped me greatly! following the instructions above from OP had my files corrupt when id factory reset. i dont have an otg usb. so the instructions from OP kind of troubled me. again, thank you!
Click to expand...
Click to collapse