Oh god, help. - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Someone, for the love of god, help me.
I rooted my gs4 on att (i337) (Ucuamf3) using the sd card/terminal emulator exploit. It worked just fine, and have full root access. I then proceeded to install safestrap to get some custom roms going. Safestrap installed and I booted to recovery just fine. Then I flashed a few safestrap-compatible roms, none of which worked. they all booted to a consistent black screen. Thrn, I looked for a more up-to-date safestrap version, which I did. So I installed it, and now I cant boot into safestrap at all. Like literally, it just skips over it. And it says its installed...please, please help.

The newer ss is for mk2 firmware. You need to flash the mf3 tar files in odin and start over

Could you post a download link and a tut for flashing via odin? Im relatively new to this

And couldnt I just flash the custom through odin? Or does that not work with this firmware version (or whatever)

shiner9er said:
And couldnt I just flash the custom through odin? Or does that not work with this firmware version (or whatever)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=46888516

jd1639 said:
http://forum.xda-developers.com/showthread.php?p=46888516
Click to expand...
Click to collapse
So just flash that via odin?

shiner9er said:
So just flash that via odin?
Click to expand...
Click to collapse
Read the thread.

Related

[Q] S4 Bell 1337m wont boot after flash.

Hello all, so i've run into a little problem and after a few hours i cant figure out what i did wrong so i reach out for help
i rooted my device successfully with odin and instlal CWM.
booted into recover, wiped data/cache/system/data as the walk through told me
then install a cx rom from here
http://forum.xda-developers.com/show....php?t=2391142
now when i turn my device on it gose stright into downloading mode with "could not do normal boot" in the top right
can any1 tell me waht i did wrong or missed?
oh i can sitll get into recovery
thanks in advanced
BurnAll said:
Hello all, so i've run into a little problem and after a few hours i cant figure out what i did wrong so i reach out for help
i rooted my device successfully with odin and instlal CWM.
booted into recover, wiped data/cache/system/data as the walk through told me
then install a cx rom from here
http://forum.xda-developers.com/show....php?t=2391142
now when i turn my device on it gose stright into downloading mode with "could not do normal boot" in the top right
can any1 tell me waht i did wrong or missed?
oh i can sitll get into recovery
thanks in advanced
Click to expand...
Click to collapse
Did you check the MD5 before flashing? Are you absolutely sure the ROM your flashing is compatible with your device? Were you on the latest MF3 firmware before you started flashing?
agent929 said:
Did you check the MD5 before flashing? Are you absolutely sure the ROM your flashing is compatible with your device? Were you on the latest MF3 firmware before you started flashing?
Click to expand...
Click to collapse
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
BurnAll said:
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
Click to expand...
Click to collapse
heck at this point i'd be happy just to get it back to normal as its late and i need to sleep and work tomorrow
BurnAll said:
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
Click to expand...
Click to collapse
Anything that says i337 will work on your phone, given that the developer has it bug free (the US ATT Samsung Galaxy S4)
agent929 said:
Anything that says i337 will work on your phone, given that the developer has it bug free (the US ATT Samsung Galaxy S4)
Click to expand...
Click to collapse
okay so this should work i also put on kernal
http://forum.xda-developers.com/show...php?p=41675354
4.2.2 TW version.
but still saying could no do normal boot, while on downloading screen
BurnAll said:
okay so this should work i also put on kernal
http://forum.xda-developers.com/show...php?p=41675354
4.2.2 TW version.
but still saying could no do normal boot, while on downloading screen
Click to expand...
Click to collapse
It says page not found...get the dots out of your link
Did you use your carriers Kernel?
Hey I just noticed that your subject for this post says i337m. Can you confirm if you have a i337 or an i337m please? Thank you.
agent929 said:
Hey I just noticed that your subject for this post says i337m. Can you confirm if you have a i337 or an i337m please? Thank you.
Click to expand...
Click to collapse
i have the m
BurnAll said:
i have the m
Click to expand...
Click to collapse
it appears you have flashed an ATT rom for the i337 and not a Rom for the i337m -- you now have several options to restore your phone
1. flash the Loki'd fix to allow the kernel and rom you flashed to boot your phone or
2. flash a cutom kernel that does work with your phone such a Ktoonz kernel (read the install instructions, for your i337m you need the TMO version of his kernel) or
3 download the stock firmware package for your phone, I'd recommend MG1 either from a link on xda or from samMobile or Samsung updates and install using Odin -- this will completely reset you phone and then you can worry about root and custom recovery after
If you do decide to install fresh factory stock MG1 I can recommend using CF-root to root the i337m and then installing Philz Recovery rather than regular CWM as it installs more easily and plays nicer on the i337m in my experience.
Remember each phone is different but do not attempt to install ATT designed roms on your i337m unless you have the loki patch also on your SD card ready to flash also.
There are many great roms available that do fir the i337m and are specifically set up for our phone.
But first, let's get you out of the download loop. EIther of the 3 options above will do. Personally, I would recommend the Odin install of the stock MG1 firmware and start over with a factory reset and a clean phone.
agent929 said:
It says page not found...get the dots out of your link
Click to expand...
Click to collapse
sorry here it is.
another fella on bell said this one worked for him
http://forum.xda-developers.com/showthread.php?p=41675354
lgsshedden said:
it appears you have flashed an ATT rom for the i337 and not a Rom for the i337m -- you now have several options to restore your phone
1. flash the Loki'd fix to allow the kernel and rom you flashed to boot your phone or
2. flash a cutom kernel that does work with your phone such a Ktoonz kernel (read the install instructions, for your i337m you need the TMO version of his kernel) or
3 download the stock firmware package for your phone, I'd recommend MG1 either from a link on xda or from samMobile or Samsung updates and install using Odin -- this will completely reset you phone and then you can worry about root and custom recovery after
If you do decide to install fresh factory stock MG1 I can recommend using CF-root to root the i337m and then installing Philz Recovery rather than regular CWM as it installs more easily and plays nicer on the i337m in my experience.
Remember each phone is different but do not attempt to install ATT designed roms on your i337m unless you have the loki patch also on your SD card ready to flash also.
There are many great roms available that do fir the i337m and are specifically set up for our phone.
But first, let's get you out of the download loop. EIther of the 3 options above will do. Personally, I would recommend the Odin install of the stock MG1 firmware and start over with a factory reset and a clean phone.
Click to expand...
Click to collapse
okay thanks i'll try to restore it using odin with the MG1 and then give the philz a shot. i'll update u once i've done so.
CF root:
http://forum.xda-developers.com/showthread.php?t=2293800
Philz recovery
http://forum.xda-developers.com/showthread.php?t=2201860
Goldeneye Rom:
http://forum.xda-developers.com/showthread.php?t=2313469
stock rooted MG1 rom
http://forum.xda-developers.com/showthread.php?t=2375180
stock firmware download links:
http://forum.xda-developers.com/showthread.php?t=2269304
lgsshedden said:
CF root:
http://forum.xda-developers.com/showthread.php?t=2293800
Philz recovery
http://forum.xda-developers.com/showthread.php?t=2201860
Goldeneye Rom:
http://forum.xda-developers.com/showthread.php?t=2313469
stock rooted MG1 rom
http://forum.xda-developers.com/showthread.php?t=2375180
stock firmware download links:
http://forum.xda-developers.com/showthread.php?t=2269304
Click to expand...
Click to collapse
okay got it back to stock, now quick question for the philz do i flash the .tar with odin? or do something else with the .zip?
Its not the ROM that's incomparable its the kernal your using. Find one for a i337m then flash it immediately after you flash your ROM and see if it works.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
---------- Post added at 09:58 PM ---------- Previous post was at 09:58 PM ----------
Zip gets flashed in your recovery.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
agent929 said:
Its not the ROM that's incomparable its the kernal your using. Find one for a i337m then flash it immediately after you flash your ROM and see if it works.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
---------- Post added at 09:58 PM ---------- Previous post was at 09:58 PM ----------
Zip gets flashed in your recovery.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
so just to go over the steps to make sure i dont mess this up,
so i flashed to the origonal versoin with odin
that worked
then i rooted it using CF root
now i got 2 files from philz and i'm not 100% sure what to do with them, i got a .tar what i assume i flash with odin and a .zip i'm not to sure what i do with they are both named philz_touch_5.15.0-jfltecan.tar.md5 and philz_touch_5.15.0-jfltecri.zip
then once i get into recovery i know how to flash roms, its just this whole kernal thing thats got me confused.
BurnAll said:
so just to go over the steps to make sure i dont mess this up,
so i flashed to the origonal versoin with odin
that worked
then i rooted it using CF root
now i got 2 files from philz and i'm not 100% sure what to do with them, i got a .tar what i assume i flash with odin and a .zip i'm not to sure what i do with they are both named philz_touch_5.15.0-jfltecan.tar.md5 and philz_touch_5.15.0-jfltecri.zip
then once i get into recovery i know how to flash roms, its just this whole kernal thing thats got me confused.
Click to expand...
Click to collapse
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
BurnAll said:
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
Click to expand...
Click to collapse
READ THIS FIRST:
MAKE SURE YOU DO NOT HAVE THE MF3 FIRMWARE ON YOUR S4. THAT IS THE MOST IMPORTANT THING TO DO RIGHT NOW. IF YOU DO, DO NOT ATTEMPT TO INSTALL A CUSTOM RECOVERY.
You don't have a custom recovery already that's why. Did casual not install TWRP for you? If not try installing Goo Manager from the app market and try installing TWRP that way. MAKE SURE THAT WHEN YOU INSTALL IT, IT SAYS YOUR MODEL NUMBER EXACTLY! I CAN NOT STRESS THIS ENOUGH! When you have TWRP installed, then flash philz with TWRP and you'll have that custom recovery instead.
BurnAll said:
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
Click to expand...
Click to collapse
do not use the zip you quoted it is not for your phone
use odin flash the tar philz_touch_5.15.0-jfltecan.tar.md5
now you have stock updated MG1 firmware with the latest baseband
root by CF root
Philz Recovery
Now follow the next steps:
1. set up your google account play store etc.
2.next, go into the recovery and do a full nandroid backup -- this gives you a stable base you can restore when needed
3. go flash a custom rom, I highly recommend the latest version of Goldeneye -- updated, well maintained, great developer, clear install instructions
4. try itt then again, use recovery to make a 2nd nandroid, this one of your custom rom install -- try different kernels, every phone is different and someone's favorite kernel just may not like your phone -- doesn't make it a bad kernel just makes it the wrong one for your phone, flash a different one
5. theme if you want -- this is where your recoveries become important as themes are notorious for not always sitting well and all is ok if you have a backup you can return to
6. NEVER flash a baseband from another variant -- stick with your MG1 from your carrier until your carrier updates stock firmware

Installed TWRP now phone STUCK

so i bought a used att already rooted and had recovery.
dont know what kind of recovery and i flashed TWRP through goomanager.
installed went great rebooted, now its stuck on start screen with RECOVERY BOOTING.
any help?
i can still go into download mode
should i just start new and reflash with odin? can someone point me to the right direction please.
bstylz911 said:
so i bought a used att already rooted and had recovery.
dont know what kind of recovery and i flashed TWRP through goomanager.
installed went great rebooted, now its stuck on start screen with RECOVERY BOOTING.
any help?
i can still go into download mode
should i just start new and reflash with odin? can someone point me to the right direction please.
Click to expand...
Click to collapse
Need more info to be able to help you, like what firmware are you on? mf3 or mk2? Once you figure that out the just Odin back to stock with the tar files posted here on XDA. Boot loaders are locked on both mf3 & mk2 so no CWM, no TWRP. Safestrap is the only recovery that works. I suggest Odin back to stock & start fresh.
i really dont know what firmware i am on...
which files should i flash??
bstylz911 said:
i really dont know what firmware i am on...
which files should i flash??
Click to expand...
Click to collapse
Have you tried doing a factory reset in stock recovery?
bstylz911 said:
i really dont know what firmware i am on...
which files should i flash??
Click to expand...
Click to collapse
Lol depends what firmware your on.
If you were on mf3 or mk2 with locked boot loader than that's why your stuck.
download amdl and mk2.. Bc the bootloader isn't all locked up its worth a try. If amdl fails in Odin then try mk2 and you should be good. But your boot loader will be locked tighter than a nun from a convent.
You really should have read around or asked questions before trying anything. Could have been avoided
SelfElevated2 said:
Lol depends what firmware your on.
If you were on mf3 or mk2 with locked boot loader than that's why your stuck.
download amdl and mk2.. Bc the bootloader isn't all locked up its worth a try. If amdl fails in Odin then try mk2 and you should be good. But your boot loader will be locked tighter than a nun from a convent.
You really should have read around or asked questions before trying anything. Could have been avoided
Click to expand...
Click to collapse
What is amdl ? Where can I fond these files? I could find stock firmware
Sent from my SGH-T999 using XDA Premium 4 mobile app
bstylz911 said:
What is amdl ? Where can I fond these files? I could find stock firmware
Sent from my SGH-T999 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The Search button is your friend.
mk2
http://forum.xda-developers.com/showthread.php?t=2621279
your first link isnt right i think?
maybe this is the amdl file ?
http://forum.xda-developers.com/showthread.php?t=2404970
bstylz911 said:
your first link isnt right i think?
maybe this is the amdl file ?
http://forum.xda-developers.com/showthread.php?t=2404970
Click to expand...
Click to collapse
Glad you found it. Also the tar file for 4.4.2 Kit Kat is available to flash through Odin, but no root as of yet.
John The Rhino said:
Glad you found it. Also the tar file for 4.4.2 Kit Kat is available to flash through Odin, but no root as of yet.
Click to expand...
Click to collapse
ok so i was able to boot my phone by going to download mode than restarting. phone booted right now.
so now im scared on going back to recovery
is BASEBAND the same as FIRMWARE cause i cannot see anything that says firwmare
if so my baseband is i337ucufmld
bstylz911 said:
ok so i was able to boot my phone by going to download mode than restarting. phone booted right now.
so now im scared on going back to recovery
is BASEBAND the same as FIRMWARE cause i cannot see anything that says firwmare
if so my baseband is i337ucufmld
Click to expand...
Click to collapse
Okay that is the leaked version of Kit Kat 4.4.2. So you need to Odin back to stock with the above tar files for mk2. You can then use this guide & either root, install Safestrap recovery & then a custom rom of your choice listed in the guide or you can take the official OTA 4.4.2 Kit Kat update. Good luck.
http://forum.xda-developers.com/showthread.php?t=2616221

I tried to install CWM on my AT&T Galaxy S4... Can you help me fix this?

Hello everyone. I was trying to get Cyanogenmod 11 on my Galaxy S4. I read a guide and followed it to a T, but I guess it must have been a bad guide, and I can't find it now.
At any rate, I have 4.2.2 with NC1, and I used Geohot's TR to get root. I installed SU, and that's working. Then (because I used to use this on my GS3) I installed Rom Toolbox pro, chose to install CWM, and I kept getting errors. So I decided to use another, ROM installer, and flash TWRP.
So now, when I reboot my phone, I just get errors that say "Odin error".
What do I need to do in order to get a custom ROM? I've read in these forums that safestrap is the only way, but I don't want to do this until I know that I can move from what I'm currently at, to safestrap. I don't want to dig my hole any deeper.
Thank you so much.
ptizzl said:
Hello everyone. I was trying to get Cyanogenmod 11 on my Galaxy S4. I read a guide and followed it to a T, but I guess it must have been a bad guide, and I can't find it now.
At any rate, I have 4.2.2 with NC1, and I used Geohot's TR to get root. I installed SU, and that's working. Then (because I used to use this on my GS3) I installed Rom Toolbox pro, chose to install CWM, and I kept getting errors. So I decided to use another, ROM installer, and flash TWRP.
So now, when I reboot my phone, I just get errors that say "Odin error".
What do I need to do in order to get a custom ROM? I've read in these forums that safestrap is the only way, but I don't want to do this until I know that I can move from what I'm currently at, to safestrap. I don't want to dig my hole any deeper.
Thank you so much.
Click to expand...
Click to collapse
You can only use Safestrap. Boot into download mode and then exit from it (I forget which button you hold) to get back in to the system. Then install Safestrap after using SELinux Mode Changer. You'll probably also want to find the recovery image for NC1 and flash that. Check the NB1-NC1 keeproot ROM thread you can find in the index for that
If you need anything else, ask here, but next time you have a new question, start it in the q&a section please.
Sent from my SGH-I337 running GPE
DeadlySin9 said:
You can only use Safestrap. Boot into download mode and then exit from it (I forget which button you hold) to get back in to the system. Then install Safestrap after using SELinux Mode Changer. You'll probably also want to find the recovery image for NC1 and flash that. Check the NB1-NC1 keeproot ROM thread you can find in the index for that
If you need anything else, ask here, but next time you have a new question, start it in the q&a section please.
Sent from my SGH-I337 running GPE
Click to expand...
Click to collapse
First, thank you for taking the time to reply, and second, I'm sorry for posting in the wrong forum.
Plus, even with SafeStrap you can't run CM/aosp roms--
rugmankc said:
Plus, even with SafeStrap you can't run CM/aosp roms--
Click to expand...
Click to collapse
I have seen that everywhere. Out of desperation, is there ANY way I can get CyanogenMod on here?
Secondly, my phone is having issues and I want to restore it to factory settings. When I choose this, it reboots and I get the ODIN error. I then have to power down, then I have to hold down while restarting, then hit cancel, then it boots normally. How do I remedy this?
ptizzl said:
I have seen that everywhere. Out of desperation, is there ANY way I can get CyanogenMod on here?
Give up or get another phone-- NO CM at this time--there is a GE rom in General, I believe, for SafeStrap.
Not sure on other issue, maybe Odin back to stock--someone else may have suddestion--Read up on things in General and Q&A on SafeStrap. And a couple other threads like All Things MK2 etc--:good:
Click to expand...
Click to collapse
rugmankc said:
Plus, even with SafeStrap you can't run CM/aosp roms--
Click to expand...
Click to collapse
Has to be TouchWiz rom. To me it is not worth the effort. I just stay stock for now.
I was hoping to get some help.
I installed SafeStrap, used SELinux, and then installed GoldenEye Rom on slot 1 after taking a backup of my current rom to my external SD card. I then installed update-supersu and att_nc1_modules through safestrap.
I reboot into system and it just boots into the exact same rom as my stock rom... but the only difference is that my networks don't work. So I've booted back into safestrap and changed my boot device back to stock and all is well.
What step am I missing?
Edit: Yes, I've made sure that Rom Slot 1 is active before booting into it.
Don't use SS so not sure what you missed--
Did you follow this--
http://forum.xda-developers.com/showpost.php?p=53038182&postcount=13961
rugmankc said:
Don't use SS so not sure what you missed--
Did you follow this--
http://forum.xda-developers.com/showpost.php?p=53038182&postcount=13961
Click to expand...
Click to collapse
Yes, this is the guide I followed.
I've been looking into this a bit more, and it looks like I may need to just overwrite the stock rom slot.
ptizzl said:
I was hoping to get some help.
I installed SafeStrap, used SELinux, and then installed GoldenEye Rom on slot 1 after taking a backup of my current rom to my external SD card. I then installed update-supersu and att_nc1_modules through safestrap.
I reboot into system and it just boots into the exact same rom as my stock rom... but the only difference is that my networks don't work. So I've booted back into safestrap and changed my boot device back to stock and all is well.
What step am I missing?
Edit: Yes, I've made sure that Rom Slot 1 is active before booting into it.
Click to expand...
Click to collapse
Exact same thing it did with Me also. It was the same Stock rom with all the same programs.
tailgunner9 said:
Exact same thing it did with Me also. It was the same Stock rom with all the same programs.
Click to expand...
Click to collapse
I believe that the rom slots no longer work, I'm looking at this right now.
ptizzl said:
Yes, this is the guide I followed.
I've been looking into this a bit more, and it looks like I may need to just overwrite the stock rom slot.
Click to expand...
Click to collapse
You do. You can't use rom slots with ss on kit Kat.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You do. You can't use rom slots with ss on kit Kat.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I've done this, but now my phone is just sitting on the Samsung logo for the last 10 minutes or more.
From safestrap - did the factory reset, went through the GE install process. Went to restart the phone, hasn't come back on yet.
ptizzl said:
I've done this, but now my phone is just sitting on the Samsung logo for the last 10 minutes or more.
From safestrap - did the factory reset, went through the GE install process. Went to restart the phone, hasn't come back on yet.
Click to expand...
Click to collapse
You're probably going to have to flash the nb1 tar in Odin and start over again. After flashing in Odin ota to nc1 then towelroot, then safestrap.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You're probably going to have to flash the nb1 tar in Odin and start over again. After flashing in Odin ota to nc1 then towelroot, then safestrap.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
So my backup that I made with Satestrap won't work? I'm in the process of restoring that right now.
Do you have time to explain what all of this means?
flash the nb1 tar in Odin?
OTA to NC1?
Does this mean use Odin to get back to Nb1, then use the built in samsung updater to get to nc1, then start again with TR and SS?
I am a noob, so be detailed
Edit: I assume you mean this guide here: http://forum.xda-developers.com/showthread.php?p=49562527
another thing: restoring my phone within safestrap worked. I'm back on my stock rom. At least my phone's working again.
ptizzl said:
So my backup that I made with Satestrap won't work? I'm in the process of restoring that right now.
Do you have time to explain what all of this means?
flash the nb1 tar in Odin?
OTA to NC1?
Does this mean use Odin to get back to Nb1, then use the built in samsung updater to get to nc1, then start again with TR and SS?
I am a noob, so be detailed
Click to expand...
Click to collapse
Use this file in Odin, it's the nb1 tar file. After you download it you'll need to extract it using winrar or 7-zip. You'll get a .tar.md5 file http://forum.xda-developers.com/showthread.php?p=50912149
Use that in Odin pda/pa slot depending on what version of Odin you're using.
The either just ota, over the air, update to nc1 or there is a nb1 to nc1 zip file that can be side loaded in the stock recovery.
Once on nc1 you can use tr to root.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Use this file in Odin, it's the nb1 tar file. After you download it you'll need to extract it using winrar or 7-zip. You'll get a .tar.md5 file http://forum.xda-developers.com/showthread.php?p=50912149
Use that in Odin pda/pa slot depending on what version of Odin you're using.
The either just ota, over the air, update to nc1 or there is a nb1 to nc1 zip file that can be side loaded in the stock recovery.
Once on nc1 you can use tr to root.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you for the detail. I was able to restore my backup - do I still need to do all of this prior to trying again in safestrap?
I suppose it would increase my chances at success.
ptizzl said:
Thank you for the detail. I was able to restore my backup - do I still need to do all of this prior to trying again in safestrap?
I suppose it would increase my chances at success.
Click to expand...
Click to collapse
If you restored your backup I would try to flash your rom in the stock slot of safestrap first. Only do the Odin if you can't restore first.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If you restored your backup I would try to flash your rom in the stock slot of safestrap first. Only do the Odin if you can't restore first.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
So my first attempt, the one that left me in the boot loop, was from the stock slot. Try again?

[Q] Odin One Click Problem...

Hey guys, I'm trying to flash [ROM][ODIN]SPH-L720 MF9 (MF9 Modem/Kernel/Bootloader/ROM - No Data Wipe - Rooted) by rwilco12. This is the link http://forum.xda-developers.com/showthread.php?t=2486134 . I cannot proceed with flashing because I have run into a bit of a problem. I am trying to flash to unlock my phone but at step 8 I've run into a snag. After I press start it fails. I see the yellow com box and everything but it still fails, I am also in Download Mode. I will include a before start picture and then what happens when it fails..see attached. TY.
Are you on MK2 or NAE by chance? If you are you cannot go back to the MF9 bootloader and that would explain the Odin failure.
frostedunit said:
Are you on MK2 or NAE by chance? If you are you cannot go back to the MF9 bootloader and that would explain the Odin failure.
Click to expand...
Click to collapse
Ok I just did the MK2/NAE tar which is this http://forum.xda-developers.com/showthread.php?t=2663619 . After I did that I tried to flash the One click again and it still gave me the fail...why?
Try the non-one click with Odin v3.07 and just the .tar file.
Mazrx said:
Ok I just did the MK2/NAE tar which is this http://forum.xda-developers.com/showthread.php?t=2663619 . After I did that I tried to flash the One click again and it still gave me the fail...why?
Click to expand...
Click to collapse
If you are on MK2 or NAE currently, you cannot use that one click program. It is only for use with the prepackaged MF9 rom that it comes with.
churchey360 said:
Try the non-one click with Odin v3.07 and just the .tar file.
Click to expand...
Click to collapse
Where would I get the non one click, I've actually have been surfing around and looking I'm not a total nub but I just can't find it anywhere.
Is it this link? http://forum.xda-developers.com/showthread.php?t=2357471
Mazrx said:
Where would I get the non one click, I've actually have been surfing around and looking I'm not a total nub but I just can't find it anywhere.
Is it this link? http://forum.xda-developers.com/showthread.php?t=2357471
Click to expand...
Click to collapse
Here is the NAE .tar file (The download for it is in the big blue section) you need to make an account before being able to download it tho.
http://www.sammobile.com/firmwares/3/?download=25944
churchey360 said:
Here is the NAE .tar file (The download for it is in the big blue section) you need to make an account before being able to download it tho.
http://www.sammobile.com/firmwares/3/?download=25944
Click to expand...
Click to collapse
Ok I have successfully flashed the rom NAE .tar you just gave to me...But what does that do for me? To domestic unlock my phone I have to revert back to MF9 touchwiz rom. And according to frostedunit I cannot flash to MF9 when I have NAE as my current baseband.
You can still flash MF9 ROM/Modem but you cant flash the MF9.tar file because it includes a non-KNOX bootloader
churchey360 said:
You can still flash MF9 ROM/Modem but you cant flash the MF9.tar file because it includes a non-KNOX bootloader
Click to expand...
Click to collapse
I know im being really nooby and annoying you with questions but the TW Rom for MF9 is located here http://forum.xda-developers.com/showthread.php?t=2357471 but which one do I download? Is it the stock MF9 Recovery?
None of those include the modem.. just ROM. Idk to much about unlocking phones but are you sure you need the mf9 rom and modem or just the modem to unlock your phone?
Honestly I'm not positive but in this thread http://forum.xda-developers.com/showthread.php?t=2530610 he says that he reverted back to the MF9 touchwiz rom so Im just trying to be a robot and follow directions...I'm really just doing this for a friend and know little about the S4 community let alone this is a dumb Sprint phone. I have a OnePlus One myself.
Here is the MF9 modem https://www.androidfilehost.com/?fid=23321874045862587
churchey360 said:
Here is the MF9 modem https://www.androidfilehost.com/?fid=23321874045862587
Click to expand...
Click to collapse
Thanks, I'll try it out and then I'll get back to you.
And MF9 ROM just flash philz recovery with odin and flash it https://www.androidfilehost.com/?fid=23032113221600698
churchey360 said:
And MF9 ROM just flash philz recovery with odin and flash it https://www.androidfilehost.com/?fid=23032113221600698
Click to expand...
Click to collapse
Ok I successfully flashed the modem fine. Now the Stock_MF9_Firmware_No_Boot_Recovery file you gave me how do I flash this recovery onto my phone? And where should I get the MF9 Rom from? Thanks again.
Mazrx said:
Ok I successfully flashed the modem fine. Now the Stock_MF9_Firmware_No_Boot_Recovery file you gave me how do I flash this recovery onto my phone? And where should I get the MF9 Rom from? Thanks again.
Click to expand...
Click to collapse
That file is the ROM but you need a custom recovery to flash it.
churchey360 said:
That file is the ROM but you need a custom recovery to flash it.
Click to expand...
Click to collapse
Ok so far I flashed the recovery, the modem, and the rom successfully does this mean I can now flash using the one click rom?
No you cant flash because you have the new bootloader but cant you go ahead and do the unlocking now?

Cant boot into system

Everytime I try to boot into system, it freezes and then restarts. I just flashed lollipop OC4 rom through FlashFire? Help please
safwanz1 said:
Everytime I try to boot into system, it freezes and then restarts. I just flashed lollipop OC4 rom through FlashFire? Help please
Click to expand...
Click to collapse
Did you uninstall safestrap before you use flashfire?
Do you use the rooted lolli rom mentioned in the guide or the custom lolli rom. If you use custom lolli, is that rom mentioned that it is flashfire compatible?
I understand you are on NC1 bootloader so in order to OC4 working properly, OC4 bootloader need to be flashed via odin.
If you try everything and did not work, go back to NB1 and start from there. Use the NB1 firmware that I mentioned before.
sway8966 said:
Did you uninstall safestrap before you use flashfire?
Do you use the rooted lolli rom mentioned in the guide or the custom lolli rom. If you use custom lolli, is that rom mentioned that it is flashfire compatible?
I understand you are on NC1 bootloader so in order to OC4 working properly, OC4 bootloader need to be flashed via odin.
If you try everything and did not work, go back to NB1 and start from there. Use the NB1 firmware that I mentioned before.
Click to expand...
Click to collapse
So dude, when I went into download mode, everytime I tried to place that ALLAT&T file into the AP slot, it would cause Odin to freeze and not respond. Naturally, I got angry and decided to reboot into system and magically, I could use the OS again. Now I think I'm going to flash the bootloader like you said
safwanz1 said:
So dude, when I went into download mode, everytime I tried to place that ALLAT&T file into the AP slot, it would cause Odin to freeze and not respond. Naturally, I got angry and decided to reboot into system and magically, I could use the OS again. Now I think I'm going to flash the bootloader like you said
Click to expand...
Click to collapse
I am sure you did extract the .md5 from the .rar. The latest odin is Version 3.10.7 but I am using version 3.10.6 for that .md5 and it went well too. Try with different odin then.
sway8966 said:
Did you uninstall safestrap before you use flashfire?
Do you use the rooted lolli rom mentioned in the guide or the custom lolli rom. If you use custom lolli, is that rom mentioned that it is flashfire compatible?
I understand you are on NC1 bootloader so in order to OC4 working properly, OC4 bootloader need to be flashed via odin.
If you try everything and did not work, go back to NB1 and start from there. Use the NB1 firmware that I mentioned before.
Click to expand...
Click to collapse
sway8966 said:
I am sure you did extract the .md5 from the .rar. The latest odin is Version 3.10.7 but I am using version 3.10.6 for that .md5 and it went well too. Try with different odin then.
Click to expand...
Click to collapse
Right dude, I just flashed the NC1 flasher and then i tapped reboot, now it's been on the custom unlock screen for a few minutes, what should I do?
Now i rebooted the device and I cant get into system or safestrap.
safwanz1 said:
Right dude, I just flashed the NC1 flasher and then i tapped reboot, now it's been on the custom unlock screen for a few minutes, what should I do?
Now i rebooted the device and I cant get into system or safestrap.
Click to expand...
Click to collapse
Wow, NC1 flasher is to use safestrap in lollipop. It only flash the NC1 kernel.
Are you in Kitkat or lollipop. If you were in your lollipop you need to update your lollipop bootloader.
As I said before, if your phone went to softbrick just flash the NB1 firmware via odin.
I swear, you are a legend, an absolute god. The amount of help and experience you have given me, if only I could pay you (I'm 15, so I can't make a PayPal yet) Right now I'm on Albe95's Note 5 port rom.

Categories

Resources