Wireless Charging pads.. - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

For those who do not know..
Tanga has the official Samsung wireless charging back cover for $10 plus shipping (I got it for 14.98 shipped.).
https://www.tanga.com/deals/1d41e0d59f86/samsung-galaxy-s4-wireless-charging-back-cover?internal_campaign=search
Now I'm in the market for a charging pad.
I see lots of threads discussing the receivers, but all I'm seeing is complaints about the LEDs and the speaker.
Are the eBay charging pads junk? Should I op to get the more expensive one? I don't mind hacking one open and cutting the speaker out as well as covering up the LED.
Thanks

custommx3 said:
For those who do not know..
Tanga has the official Samsung wireless charging back cover for $10 plus shipping (I got it for 14.98 shipped.).
https://www.tanga.com/deals/1d41e0d59f86/samsung-galaxy-s4-wireless-charging-back-cover?internal_campaign=search
Now I'm in the market for a charging pad.
I see lots of threads discussing the receivers, but all I'm seeing is complaints about the LEDs and the speaker.
Are the eBay charging pads junk? Should I op to get the more expensive one? I don't mind hacking one open and cutting the speaker out as well as covering up the LED.
Thanks
Click to expand...
Click to collapse
you have to watch on ebay some of the charging pads are actually magnetic like powermat and not qi, the recievers are the same way... I bought a receiver off ebay that fits under my factory battery door and works great with the nokia charging pad even through otterbox defender. Do your research other than just ebay and you should be fine if you want to go that route.

gottech said:
you have to watch on ebay some of the charging pads are actually magnetic like powermat and not qi, the recievers are the same way... I bought a receiver off ebay that fits under my factory battery door and works great with the nokia charging pad even through otterbox defender. Do your research other than just ebay and you should be fine if you want to go that route.
Click to expand...
Click to collapse
Thank you. I purchased the OEM charging cover already. I'll keep an eye out on the pads to make sire its Qi Compatible!

custommx3 said:
For those who do not know..
Tanga has the official Samsung wireless charging back cover for $10 plus shipping (I got it for 14.98 shipped.).
https://www.tanga.com/deals/1d41e0d59f86/samsung-galaxy-s4-wireless-charging-back-cover?internal_campaign=search
Now I'm in the market for a charging pad.
I see lots of threads discussing the receivers, but all I'm seeing is complaints about the LEDs and the speaker.
Are the eBay charging pads junk? Should I op to get the more expensive one? I don't mind hacking one open and cutting the speaker out as well as covering up the LED.
Thanks
Click to expand...
Click to collapse
MAN....just bought one elsewhere for full price last week

Related

Charging a Spare Kaiser Battery (Cradle)

What would you guys suggest for charging a spare battery? I've seen a couple base station chargers that you set your Kaiser into and it has a slot for an extra battery, but I can find any that have credible reviews. I bought one for my Hermes back in the day D) that didn't fit right.
I've since learned that mobile accessory manufacturers are about as shady as used car salesmen and nothing should be purchased before consulting XDA first.
battery charger
look at ebay and the item no was 130171605671
klasikahl said:
What would you guys suggest for charging a spare battery? I've seen a couple base station chargers that you set your Kaiser into and it has a slot for an extra battery, but I can find any that have credible reviews. I bought one for my Hermes back in the day D) that didn't fit right.
I've since learned that mobile accessory manufacturers are about as shady as used car salesmen and nothing should be purchased before consulting XDA first.
Click to expand...
Click to collapse
benmuliono888 said:
look at ebay and the item no was 130171605671
Click to expand...
Click to collapse
I bought this exact one from cnn.cn for $17 shipped. Only problem is the led lights don't work correctly so I'm not sure if the spare battery is charging or not

PowerMat induction charging door for HD2 $6 at Amazon

Has anyone tried using a PowerMat Droid X induction charger on the HD2? It has a microUSB plug tethered to the induction battery door, so it looks like it can go on any device with microUSB charging ports, as long as you velcro the Droid X battery door to your device, and cut off the extraneous edges off that door.
links:
BestBuy's online clearance website CowBoom usually has the whole package for $5, includes battery door and docking charger base.
http://www.cowboom.com/product/1012918
http://www.amazon.com/dp/B00462QB6U
HD2 is now over 2yrs old, but if the Droid X microUSB powermat can be trimmed and custom fit to the HD2, it's futureproof for your next phone or tablet too! Anyone tried it?
EDIT:
Amazon now has the HD2 powermat door for $6. No more need to mod.
Amazon now has the HD2 powermat door for $6 free shipping with Prime or $25. No more need to mod the Droid X powermat door, but original idea still looks interesting for charging other microUSB devices. Anyone tried either of these on the HD2?
http://www.amazon.com/dp/B00462QB9C/
edit:
there's no need to mod anything if using the $6 amazon back cover. Search wasn't working before, but found some links with pictures of the pins if anyone wants to glue the DroidX cover into the HD2 car-dock pins.
http://forum.xda-developers.com/showthread.php?t=815901&page=4 Post33 Picture of HD2 PowerMat pins,
http://forum.xda-developers.com/showthread.php?t=762783&page=2 Post13&20 Picture of Palm modded PowerMat pins,
http://forum.xda-developers.com/showthread.php?t=849839&page=6 Post52&60 Picture of YellowReset-HD2 solder points for car-dock.
I ended up buying a power mat before seeing your link about people having issues getting their phone to work properly. Unfortunately I too am unable to charge my phone. The lights come on the mat, I hear the "shake" sound I think they call it but it just won't charge. Has anyone got this to work on their phone after it wouldn't?
Sent from my HTC HD2 using xda premium
htccraze said:
I ended up buying a power mat before seeing your link about people having issues getting their phone to work properly. Unfortunately I too am unable to charge my phone. The lights come on the mat, I hear the "shake" sound I think they call it but it just won't charge. Has anyone got this to work on their phone after it wouldn't?
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Here is how to fix it, you have to be ok with soldering though.
http://forum.xda-developers.com/showpost.php?p=19376509&postcount=60
IT WORKS !!!!!
After many months of agony the micro USB port of my HD2 died a month ago. Thanks to llofthou and powermat my HD2 is fully charged.
For those who could benefit from this experience here is how i proceeded and it was quite easy.
First i bought a powermat cover...and unfortunately the serial is long past the limit...
Because i did not want to open it the normal way (i thought i woul never manage to put the screen in place) I Just used a dremel grinder to cut the plastic and metal behind the sim card (easier than i thought). see iloftou's drawing for more info. I arrived directly on the thing to solder. OK it's small but not that small, i took my Hd2 to the electronic shop by the corner and he did the soldering in 5 min. Seems it wasn't a big problem for him..
Thank to all the community to achive these prodigies.
HD2 3 years old still rolling:laugh:
PS : Photos are in another thread : http://forum.xda-developers.com/showthread.php?t=849839&page=6

Qi charging problems

I ordered the official Samsung wireless cover from Amazon, slapped it on, and then put my Otterbox Commuter series over it - so far so good, everything fits reasonably well.
I go to put my S5 on a wireless charger and it charges. Then stops charging. Then starts charging again. Then stops again. Over and over it repeats this.
I get to thinking the phone is just too far away, so I take off the hardshell of the Otterbox Commuter. Same thing happens again. So I take off the soft shell - now I'm down to just the naked phone, and it's still charging on and off.
I'm using the blackberry folding blade wires, and the chargers found here: http://forum.xda-developers.com/goo...udget-wireless-charger-showdown-5-qi-t2676249
Specifically, the tilted charger and rectangle with LED lights. Both are giving me the exact same on & off problem.
So does anyone know how to fix this? Is it the chargers or something I'm doing? Are the chargers just not generating a strong enough field (if so, which charger can I get that will generate a better field?)
Thanks for any help
EDIT: Clarified that wireless cover is official Samsung
xmacro said:
I ordered the wireless cover from Amazon, slapped it on, and then put my Otterbox Commuter series over it - so far so good, everything fits reasonably well.
I go to put my S5 on a wireless charger and it charges. Then stops charging. Then starts charging again. Then stops again. Over and over it repeats this.
I get to thinking the phone is just too far away, so I take off the hardshell of the Otterbox Commuter. Same thing happens again. So I take off the soft shell - now I'm down to just the naked phone, and it's still charging on and off.
I'm using the blackberry folding blade wires, and the chargers found here: http://forum.xda-developers.com/goo...udget-wireless-charger-showdown-5-qi-t2676249
Specifically, the tilted charger and rectangle with LED lights. Both are giving me the exact same on & off problem.
So does anyone know how to fix this? Is it the chargers or something I'm doing? Are the chargers just not generating a strong enough field (if so, which charger can I get that will generate a better field?)
Thanks for any help
Click to expand...
Click to collapse
I had the same issue with a cheap receiver I bought off ebay. The receiver was junk. I took it out of the phone and dropped it on the mat and used a multimeter to check my voltages and never got consistent readings. Tried again with the same chinese mat and the official back and no issues at all.
Kite09 said:
I had the same issue with a cheap receiver I bought off ebay. The receiver was junk. I took it out of the phone and dropped it on the mat and used a multimeter to check my voltages and never got consistent readings. Tried again with the same chinese mat and the official back and no issues at all.
Click to expand...
Click to collapse
Ah, sorry, should have clarified - I'm using the (allegedly) official Samsung wireless cover, the part that replaces the entire back
xmacro said:
Ah, sorry, should have clarified - I'm using the (allegedly) official Samsung wireless cover, the part that replaces the entire back
Click to expand...
Click to collapse
I am having similar issues using a Palm wireless charger I custom made. I believe the issue is the connection from the cover to the pins on the device next to the battery. I am going to try adjusting it. Also, putting the phone in power saving mode before wireless charging seems to help. Think it may have to do with the wireless charging coil not providing enough amps for the phone to keep up. Trying a different cable/wall charger may help.
xmacro said:
Ah, sorry, should have clarified - I'm using the (allegedly) official Samsung wireless cover, the part that replaces the entire back
Click to expand...
Click to collapse
It could be the output isn't high enough. For the official mat you need to have a 3 amp charger for it to work. And if the output is too low, the phone may be getting confused because it is detecting a current, but not enough of one for it to be registering that it is charging. I have a car charger that has a 1 amp and a 2 amp setting, and when I try it on the 1 amp setting I get the same issue where it connects and disconnects. 2 amp and I get 0 issues.
I have a similar issue. I'm using the official Samsung S-View Wireless Charging Cover with the Nexus 5 wireless Charger. I get nothing when I put them together. I believe the output from the charger is around 2 amps and it works perfectly with my Nexus 5 (surprise, surprise...) Not sure why I don't get any response whatsoever...
Kite09 said:
It could be the output isn't high enough. For the official mat you need to have a 3 amp charger for it to work. And if the output is too low, the phone may be getting confused because it is detecting a current, but not enough of one for it to be registering that it is charging. I have a car charger that has a 1 amp and a 2 amp setting, and when I try it on the 1 amp setting I get the same issue where it connects and disconnects. 2 amp and I get 0 issues.
Click to expand...
Click to collapse
I'm using a blackberry folding blade charger, the stated output is 1.8 amps, and my Samsung charger that came with the phone is 2.0 amps; both give me the on/off problem. Is 3 amps really the key? Where do you find one?
xmacro said:
I'm using a blackberry folding blade charger, the stated output is 1.8 amps, and my Samsung charger that came with the phone is 2.0 amps; both give me the on/off problem. Is 3 amps really the key? Where do you find one?
Click to expand...
Click to collapse
Sorry meant to say 2 amp. But you may want to test your mat and receiver and see if it really putting out the 1 amp the other thread said it was supposed to. If you are getting an output of less than 1 amp that the other thread says it should be then that is probably your issue. Unfortunately I'm not able to measure the outputs on either of my mats to give you an idea until later this evening when I get out of work.
Kite09 said:
Sorry meant to say 2 amp. But you may want to test your mat and receiver and see if it really putting out the 1 amp the other thread said it was supposed to. If you are getting an output of less than 1 amp that the other thread says it should be then that is probably your issue. Unfortunately I'm not able to measure the outputs on either of my mats to give you an idea until later this evening when I get out of work.
Click to expand...
Click to collapse
I think you may be right; it may well be the mats I have are just junk, both of them, unfortunately.
I opened up the back of the phone, and brushed off the wireless charging prongs, just to make sure they weren't dirty. Put cover back on, put otterbox commuter case back on.
Put it on the wireless charger, it cycles on/off again and again, about once per second. Take off the hard shell, leaving just the soft shell, and it cycles on/off about once every five seconds - that is, the interval actually got longer. Take off the soft shell, down to a naked phone, and works after cycling on/off about 5 times, then it settles down and stops cycling.
On another charger, the tilted qi charger, it'll charge if the phone is naked, but if I put even the soft shell of the Otterbox Commuter on it, it'll cycle a few times then just not charge at all.
I'm not sure this is a connection problem with the prongs, or a problem with the wire/charger. I think it has something to do with the field that the qi charger is generating. Since I don't know jack about the qi standard, can anyone tell me if all qi fields are equal? That is, do higher quality qi chargers produce a larger or strong field than cheap units?
Like I said in the OP, these are all very cheap chargers, $15 at most, and I'm wondering if that may be the cause.
xmacro said:
I'm using a blackberry folding blade charger, the stated output is 1.8 amps, and my Samsung charger that came with the phone is 2.0 amps; both give me the on/off problem. Is 3 amps really the key? Where do you find one?
Click to expand...
Click to collapse
I use the 2A charger that came with the phone with the CHOETECH pads. The insert is the CHOETECH mat inside the cover. The pad is rated 2.1A input, 1A output. My phone cycles on-off occasionally when the phone hits 100%. I use the Otterbox Defender case.
jetskier said:
I use the 2A charger that came with the phone with the CHOETECH pads. The insert is the CHOETECH mat inside the cover. The pad is rated 2.1A input, 1A output. My phone cycles on-off occasionally when the phone hits 100%. I use the Otterbox Defender case.
Click to expand...
Click to collapse
Interesting, so could the problem be due to just using a cheap generic? Seems that the cheap ones may be generating a smaller or weaker field?
Just wanted to post an update - bought a more expensive charger, one with 3 coils instead of the 1 that was in my other two - and now it charges fine, right through my Otterbox Commuter case.
So to anyone else having this problem - the field generated doesn't seem to be big enough to penetrate the Otterbox Commuter with just one coil, you need 3 or so.
EDIT: Specifially, it was the Cheotech Qi wireless charger, rectangle with LED
xmacro said:
Just wanted to post an update - bought a more expensive charger, one with 3 coils instead of the 1 that was in my other two - and now it charges fine, right through my Otterbox Commuter case.
So to anyone else having this problem - the field generated doesn't seem to be big enough to penetrate the Otterbox Commuter with just one coil, you need 3 or so.
EDIT: Specifially, it was the Cheotech Qi wireless charger, rectangle with LED
Click to expand...
Click to collapse
it's not the problem with the coil, they give out the same current, it's because the angled charger is a cheap and nasty one, and the flat one is just a fake one, the official one cost alot more.
3 coils only give you a wider surface detection, the current is just the same as a single coil or a 7 coils.
The 3 coils charger you have is a rebadge of powerqi T300 which is a highly recommended one.
kms108 said:
it's not the problem with the coil, they give out the same current, it's because the angled charger is a cheap and nasty one, and the flat one is just a fake one, the official one cost alot more.
3 coils only give you a wider surface detection, the current is just the same as a single coil or a 7 coils.
The 3 coils charger you have is a rebadge of powerqi T300 which is a highly recommended one.
Click to expand...
Click to collapse
Ya learn something new everyday - thanks for the info

LG G4 QI Wireless Warning / Issues

I bought the CFR-100 Quick Circle Case with the QI coil, and was planning to rip it out but the case is actually quite nice so I'm using it as is - but be warned. The power requirements of the G4 seems to cause issues with existing QI pads (but I would hope not the official LG one) - I have tried it on a Maxell Dual coil pad, and it didn't work at all (the light just blinked and nothing happened on the phone), and on my Panasonic QE-TM101 moving coil pad it didn't work either, until I took off the clear plastic shield that comes with the pad, and even then to get it to work it is touchy and requires me to press down hard on the phone/pad for a few seconds to get the charging going....so it sort-of works with the Panasonic QE-TM101.
Edit: a friend has a white version of the QE-TM101 (mine is black) and it works all the time, no issues - but on mine, the issues are as above....it still doesn't work at all on the Maxell dual coil pad.
Edit 2: It may be variations in the quick cover case because it is all VERY touchy.....I took apart my black QE-TM101 and lengthened the spring that pushes up the coil, I also poured boiling water over the top cover to try to warp it inwards - and this has now made it work better, not 100% but 9 out of 10 times it will charge now without me pressing down on it.
Now that's weird...
I seriously cannot understand how LG decided to drop proper Qi support. And now, if it's going to have problems with even additional accessories, it's worse.
I'm using Nokia-101 which works flawless on my G3 even with a hard plastic case. Wondering if it supports Quick Circle considering it's one of the first (if not the) Qi chargers.
I have the Tylt Vu (http://www.tylt.com/vu/) which I had been using for my Nexus 5.
It's just not working with the G4 official Quick Circle case
It's weird because the G3 is listed as compatible. I'll try again later today but I'm not expecting anything.
I have ripped the official sticker out of the circle case and stuck it into my brown leather back and it charges great on both the official qi charger and this rather cheap one Qi Charger maybe you have a faulty one?
Hm...
DarthEwok said:
I have ripped the official sticker out of the circle case and stuck it into my brown leather back and it charges great on both the official qi charger and this rather cheap one Qi Charger maybe you have a faulty one?
Click to expand...
Click to collapse
Thought to buy just the QI sticker and put it to the original leather battery housing back. Do you see any issue with the leather back being hot during the charging? This is the only concern I have about it.
Thanks!
nadram said:
I have the Tylt Vu (http://www.tylt.com/vu/) which I had been using for my Nexus 5.
It's just not working with the G4 official Quick Circle case
It's weird because the G3 is listed as compatible. I'll try again later today but I'm not expecting anything.
Click to expand...
Click to collapse
I have the same Tylt charger & it works fine with my H815. I have the Quick Circle Case. Which model do you have? If it's the AT&T model, it's Powermat.
Sent from my LG-H815 using Tapatalk
a22matic said:
I have the same Tylt charger & it works fine with my H815. I have the Quick Circle Case. Which model do you have? If it's the AT&T model, it's Powermat.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Thanks for letting me know.
I have the H818P
It's not carrier locked, I didn't buy it from a carrier, although I'm not in the USA either.
I tried different positions again yesterday but nothing... It's still working fine with my Nexus 5
EugeneR said:
Thought to buy just the QI sticker and put it to the original leather battery housing back. Do you see any issue with the leather back being hot during the charging? This is the only concern I have about it.
Thanks!
Click to expand...
Click to collapse
I haven't noticed out getting hot at all
Thanks!
FYI: Those stickers are on Amazon (Prime, too) if you're interested. $15.
I bought one yesterday.
I bought one off Amazon and installed it yesterday. It was a pain to get on right but it works perfect now
More power
I bought the quick circle case and was also having problems getting it to charge. I have a dual device Energizer pad and a cheap eBay pad. Neither was working with the quick circle case. Tonight I tried plugging the eBay pad into my 2A USB charger and it started charging. If you are having problems, try a higher power source for the charging pad. The Energizer pad still doesn't work, it has a non-USB plug power source.
kingwaffle said:
FYI: Those stickers are on Amazon (Prime, too) if you're interested. $15.
I bought one yesterday.
Click to expand...
Click to collapse
Do you have the amazon link. I can't find the prime one. All i find are ones that won't arrive until Mid-July...not acceptable.
The one I bought days no longer available
fireguy0306 said:
Do you have the amazon link. I can't find the prime one. All i find are ones that won't arrive until Mid-July...not acceptable.
Click to expand...
Click to collapse
The one I bought ended up not working on my Zens charger, so maybe you dodged one.
It was this one:
https://www.amazon.com/gp/product/B00YNIN8YK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
QI stickers burning internal chip ...?
Hello,
Reading through XDA forum, I got the understanding that QI stickers (at least some of them) are not working very long. Some experienced troubles, despite changing sticker / pad to different brand/model.
Is there any really positive experience on long term?
And if yes, please share what sticker and charging pad you use
I have some cheap off-brand wireless charging pad+sticker, and it works, but it charges so slowly it's hardly worth using, and the position has to be just right.
Buzuc said:
Hello,
Reading through XDA forum, I got the understanding that QI stickers (at least some of them) are not working very long. Some experienced troubles, despite changing sticker / pad to different brand/model.
Is there any really positive experience on long term?
And if yes, please share what sticker and charging pad you use
Click to expand...
Click to collapse
This thread has some great info on the stickers and chargers various people are using and the experiences they've had. My post from the thread is below. I'm still using the same sticker and charger daily, and I've had absolutely no issues. A good quality sticker and 3 coil charger go a long way towards minimizing issues.
bsweetness said:
G4 Model: Verizon G4 (VS986)
Sticker or Official: NeWisdom (Upgraded Chip) sticker via Amazon
Qi Charger: CHOE Stadium Qi Wireless 3-Coil Charger
Launcher: Nova Prime
DPI Used: Stock
Alarm Usage: Rarely
I installed the upgraded NeWisdom sticker a couple weeks ago, and I've been charging wirelessly each night since then. I have yet to experience any lockups. It does get hotter and charge slower than my previous phones that used OEM wireless charging backs (Galaxy S5, Note 4) or came with wireless charging built-in (Droid Turbo) when using the same wireless charger.
Click to expand...
Click to collapse
There is another thread around here with more information (Qi Charging Woes). Mine magically just got better. No more lockups at night, or anything. Maybe LG was pulling data at night and found it was causing lockups and tweaked the backup scripts. Lol. Kinda weird it went from 3-4 nights a week to none at all.
Quick circle case
whiskymobile said:
I bought the CFR-100 Quick Circle Case with the QI coil, and was planning to rip it out but the case is actually quite nice so I'm using it as is - but be warned. The power requirements of the G4 seems to cause issues with existing QI pads (but I would hope not the official LG one) - I have tried it on a Maxell Dual coil pad, and it didn't work at all (the light just blinked and nothing happened on the phone), and on my Panasonic QE-TM101 moving coil pad it didn't work either, until I took off the clear plastic shield that comes with the pad, and even then to get it to work it is touchy and requires me to press down hard on the phone/pad for a few seconds to get the charging going....so it sort-of works with the Panasonic QE-TM101.
Edit: a friend has a white version of the QE-TM101 (mine is black) and it works all the time, no issues - but on mine, the issues are as above....it still doesn't work at all on the Maxell dual coil pad.
Edit 2: It may be variations in the quick cover case because it is all VERY touchy.....I took apart my black QE-TM101 and lengthened the spring that pushes up the coil, I also poured boiling water over the top cover to try to warp it inwards - and this has now made it work better, not 100% but 9 out of 10 times it will charge now without me pressing down on it.
Click to expand...
Click to collapse
I was tied Ankway and Choetech those two brand. from my own opinion, they products are superior quality. hope it will be useful for you!!

Wireless Charging for BB Priv AT&T

Just about to get my Priv (FINALLY!), buying stuffs to armor it up - quick chargers, cases etc..
So here is the question: as there is no official wireless charger for Priv, which 3rd-party wireless charger available is best for it?
84281227 said:
Just about to get my Priv (FINALLY!), buying stuffs to armor it up - quick chargers, cases etc..
So here is the question: as there is no official wireless charger for Priv, which 3rd-party wireless charger available is best for it?
Click to expand...
Click to collapse
I don't have priv yet, but planning to buy one in a few days. These are the wireless chargers I was looking at:
1) Anker
http://www.amazon.com/gp/product/B0...ue&ref_=ox_sc_sfl_title_5&smid=A294P4X9EWVXLJ
2) Spigen
http://www.amazon.com/gp/product/B0...ue&ref_=ox_sc_sfl_title_6&smid=A2SFKRF5TPZMT5
3) MoKo
http://www.amazon.com/gp/product/B0...ue&ref_=ox_sc_sfl_title_7&smid=A2VT4H683M5NNA
4) Choetech
http://www.amazon.com/gp/product/B0...ue&ref_=ox_sc_sfl_title_8&smid=A1NCVKF8LXGAA9
#3 has AC adapter included, but that is about it. I want it to be like a stand, so it will be easier to see what if I get a text, call...
Not sure if you bought one yet, but I've had mine for a few days and I can tell you the wireless chargers that will work well with this will be a select few. It seems the coil in the PRIV is near the very bottom of the back, so chargers like the spigen listed above (Which I have and use with my Nexus 7 LTE) don't work well at all. It continuously connects and disconnects because the coil is so low on the PRIV that it doesn't line up well. I also have the most recent Samsung QI charger that I got for my Note 5, and that one actually works pretty well because you can set the PRIV on it towards the very bottom of the device. Another example is trying to us the Nexus QI charging orb, which the PRIV won't work well with because putting it on there so close to the bottom causes the device to fall over the top because it's top heavy. So long story short a pad or flat surface charger will most likely be best as it allows you to position the device properly. Hopefully this helps!
PS: This is the best device I've had in a long time, and I've owned most current and past flagships. Reminds me of my days on webOS with my Palm Pres...but a million times better!
dmband64 said:
Not sure if you bought one yet, but I've had mine for a few days and I can tell you the wireless chargers that will work well with this will be a select few. It seems the coil in the PRIV is near the very bottom of the back, so chargers like the spigen listed above (Which I have and use with my Nexus 7 LTE) don't work well at all. It continuously connects and disconnects because the coil is so low on the PRIV that it doesn't line up well. I also have the most recent Samsung QI charger that I got for my Note 5, and that one actually works pretty well because you can set the PRIV on it towards the very bottom of the device. Another example is trying to us the Nexus QI charging orb, which the PRIV won't work well with because putting it on there so close to the bottom causes the device to fall over the top because it's top heavy. So long story short a pad or flat surface charger will most likely be best as it allows you to position the device properly. Hopefully this helps!
PS: This is the best device I've had in a long time, and I've owned most current and past flagships. Reminds me of my days on webOS with my Palm Pres...but a million times better!
Click to expand...
Click to collapse
My Priv is arriving tomorrow I will use your recommendation when I will be buying wireless charger... It is just when using the pad, the device is laying down instead of being vertical so I could see and read messages...
By the way, have you tried to put your Priv in landscape on the wireless charger such as spigen?
Charkatak said:
My Priv is arriving tomorrow I will use your recommendation when I will be buying wireless charger... It is just when using the pad, the device is laying down instead of being vertical so I could see and read messages...
Click to expand...
Click to collapse
Yeah I like the stand up chargers as well so I can view things while working. Let me know if you find a good one that works well.
Sent from my STV100-1 using Tapatalk
dmband64 said:
Yeah I like the stand up chargers as well so I can view things while working. Let me know if you find a good one that works well.
Sent from my STV100-1 using Tapatalk
Click to expand...
Click to collapse
I just asked users on amazon if some of the chargers do work well with Priv. Will reply here if I get any answer. Have you tried to put your Priv in landscape on the wireless charger such as spigen? The reason I asked is because I read that some user had issues with some phones which would disconnect/re-connect, but when placed horizontally on the charger, all was well.
Charkatak said:
I just asked users on amazon if some of the chargers do work well with Priv. Will reply here if I get any answer. Have you tried to put your Priv in landscape on the wireless charger such as spigen? The reason I asked is because I read that some user had issues with some phones which would disconnect/re-connect, but when placed horizontally on the charger, all was well.
Click to expand...
Click to collapse
Yes it does wort of work. The problem is that the coil is so low on the Priv that it falls of when trying to put it on there horizontal. Same with the Nexus orb. It's kind of annoying. One solution with the spigen is to put something under the priv when it's on there horizontal so it meets up with the higher coil as the spigen has three coils.
Sent from my STV100-1 using Tapatalk
dmband64 said:
Yes it does wort of work. The problem is that the coil is so low on the Priv that it falls of when trying to put it on there horizontal. Same with the Nexus orb. It's kind of annoying. One solution with the spigen is to put something under the priv when it's on there horizontal so it meets up with the higher coil as the spigen has three coils.
Sent from my STV100-1 using Tapatalk
Click to expand...
Click to collapse
I saw 2 different Samsung chargers on amazon... Do you know the samsung charger's model # that you have described in one of your replies?
This is the one I have...
http://www.amazon.com/Samsung-EP-PG...1450725284&sr=8-3&keywords=samsung+qi+charger
dmband64 said:
This is the one I have...
http://www.amazon.com/Samsung-EP-PG...1450725284&sr=8-3&keywords=samsung+qi+charger
Click to expand...
Click to collapse
Do you know if the main difference is the "fast charging" and if Priv might benefit from the below charger vs yours?
http://www.amazon.com/Samsung-Fast-...8755&sr=1-9&keywords=samsung+wireless+charger
As far as I know the PRIV is not compatible with Fast Wireless Charging, but I'm not sure. The issue is simply the placement of the PRIV's wireless coil in the back of the phone. It's nearly at the very bottom of the phone so it doesn't align well with some wireless chargers. Most phones have the coil in the middle of the back.
dmband64 said:
As far as I know the PRIV is not compatible with Fast Wireless Charging, but I'm not sure. The issue is simply the placement of the PRIV's wireless coil in the back of the phone. It's nearly at the very bottom of the phone so it doesn't align well with some wireless chargers. Most phones have the coil in the middle of the back.
Click to expand...
Click to collapse
Looks like Fast Charging is for samsung phones. I found couple of interesting chargers which are vertical:
1) http://www.amazon.com/Wireless-Miko...636&sr=8-5&keywords=vertical+wireless+charger
2) http://www.amazon.com/Aukey-Wireles...636&sr=8-6&keywords=vertical+wireless+charger
I think I would get the first one....
Anyone tried the Samsung wireless charger? I was trying with the Samsung wireless charger for S6 but it doesn't work...
Just found out my device is STV100-3 which doesn't support wireless charging.... Darn darn darn..... Ahhhhhhhhh
It should work with any QI wireless charger, assuming you have a model with wireless charging built in.
UPDATE: Contrary to my previous posts...the spigen charger referenced in this thread DOES work with the PRIV. I tried it again last night with a different cable and charger and it does work perfectly. It must have been an issue with the cable and charger I was using with it previously not providing enough voltage or something. Sorry for the incorrect information.
Also, I can confirm it does work with the Samsung chargers, but the PRIV's coil is at the very bottom so you have to line up the very bottom of the phone onto the charger. Hope this helps.
dmband64 said:
It should work with any QI wireless charger, assuming you have a model with wireless charging built in.
UPDATE: Contrary to my previous posts...the spigen charger referenced in this thread DOES work with the PRIV. I tried it again last night with a different cable and charger and it does work perfectly. It must have been an issue with the cable and charger I was using with it previously not providing enough voltage or something. Sorry for the incorrect information.
Also, I can confirm it does work with the Samsung chargers, but the PRIV's coil is at the very bottom so you have to line up the very bottom of the phone onto the charger. Hope this helps.
Click to expand...
Click to collapse
Thanks for the update!
Moko Standup Charger
My priv has the official blackberry leather flip case, and I'm only interested in chargers that work with the phone in the case.
I just got the Moko stand up Qi charger a few days ago and it does NOT work reliably with the Priv in a case. It seems to work some of the time, but the night before last it charged to 60% and stopped. It's pretty easy to reproduce this behavior since it's never charged to 100%. One strange thing is that even when it only charged to 60%, it's pretty warm between the Priv and the stand. I know lipo lifetime is accelerated with heat, so I don't think using this, even if charges to 60% is a great idea..
I have a cheap square samsung charger that seems to work better, but you have to find the sweet spot.
I'm still looking for one that is 100%. Eventually, I want two, one for my desk and one for my car (air vent) but I'm definitely not going to try the Moko car version.
EDIT: I made shim (out of cardboard for now) to raise the phone up in the Moko dock by 1/2 inch. It charged to 100% for the first time! The phone is still pretty warm (about 94 degrees F) but that might be the way all of the Qi chargers work.
watsys said:
My priv has the official blackberry leather flip case, and I'm only interested in chargers that work with the phone in the case.
I just got the Moko stand up Qi charger a few days ago and it does NOT work reliably with the Priv in a case. It seems to work some of the time, but the night before last it charged to 60% and stopped. It's pretty easy to reproduce this behavior since it's never charged to 100%. One strange thing is that even when it only charged to 60%, it's pretty warm between the Priv and the stand. I know lipo lifetime is accelerated with heat, so I don't think using this, even if charges to 60% is a great idea..
I have a cheap square samsung charger that seems to work better, but you have to find the sweet spot.
I'm still looking for one that is 100%. Eventually, I want two, one for my desk and one for my car (air vent) but I'm definitely not going to try the Moko car version.
Click to expand...
Click to collapse
After I got my Priv, I am leaning towards this one, but have yet to decide:
http://www.amazon.com/Wireless-Miko...636&sr=8-5&keywords=vertical+wireless+charger
84281227 said:
Just about to get my Priv (FINALLY!), buying stuffs to armor it up - quick chargers, cases etc..
So here is the question: as there is no official wireless charger for Priv, which 3rd-party wireless charger available is best for it?
Click to expand...
Click to collapse
This Meenova wireless charging dock is another choice -- adjustable, drop & charge.
http://www.amazon.com/Ultimus-Wireless-Charging-Samsung-Galaxy/dp/B014QZCFOS/ref=sr_1_8?m=A3UZZ0M53CX865&s=merchant-items&ie=UTF8&qid=1452182613&sr=1-8
Why BB want to have two versions? One with wireless and one w/o.........
US users are more privileged, while others over the other half of the world are not as privileged? :crying:

Categories

Resources