PowerMat induction charging door for HD2 $6 at Amazon - HD2 General

Has anyone tried using a PowerMat Droid X induction charger on the HD2? It has a microUSB plug tethered to the induction battery door, so it looks like it can go on any device with microUSB charging ports, as long as you velcro the Droid X battery door to your device, and cut off the extraneous edges off that door.
links:
BestBuy's online clearance website CowBoom usually has the whole package for $5, includes battery door and docking charger base.
http://www.cowboom.com/product/1012918
http://www.amazon.com/dp/B00462QB6U
HD2 is now over 2yrs old, but if the Droid X microUSB powermat can be trimmed and custom fit to the HD2, it's futureproof for your next phone or tablet too! Anyone tried it?
EDIT:
Amazon now has the HD2 powermat door for $6. No more need to mod.

Amazon now has the HD2 powermat door for $6 free shipping with Prime or $25. No more need to mod the Droid X powermat door, but original idea still looks interesting for charging other microUSB devices. Anyone tried either of these on the HD2?
http://www.amazon.com/dp/B00462QB9C/
edit:
there's no need to mod anything if using the $6 amazon back cover. Search wasn't working before, but found some links with pictures of the pins if anyone wants to glue the DroidX cover into the HD2 car-dock pins.
http://forum.xda-developers.com/showthread.php?t=815901&page=4 Post33 Picture of HD2 PowerMat pins,
http://forum.xda-developers.com/showthread.php?t=762783&page=2 Post13&20 Picture of Palm modded PowerMat pins,
http://forum.xda-developers.com/showthread.php?t=849839&page=6 Post52&60 Picture of YellowReset-HD2 solder points for car-dock.

I ended up buying a power mat before seeing your link about people having issues getting their phone to work properly. Unfortunately I too am unable to charge my phone. The lights come on the mat, I hear the "shake" sound I think they call it but it just won't charge. Has anyone got this to work on their phone after it wouldn't?
Sent from my HTC HD2 using xda premium

htccraze said:
I ended up buying a power mat before seeing your link about people having issues getting their phone to work properly. Unfortunately I too am unable to charge my phone. The lights come on the mat, I hear the "shake" sound I think they call it but it just won't charge. Has anyone got this to work on their phone after it wouldn't?
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Here is how to fix it, you have to be ok with soldering though.
http://forum.xda-developers.com/showpost.php?p=19376509&postcount=60

IT WORKS !!!!!
After many months of agony the micro USB port of my HD2 died a month ago. Thanks to llofthou and powermat my HD2 is fully charged.
For those who could benefit from this experience here is how i proceeded and it was quite easy.
First i bought a powermat cover...and unfortunately the serial is long past the limit...
Because i did not want to open it the normal way (i thought i woul never manage to put the screen in place) I Just used a dremel grinder to cut the plastic and metal behind the sim card (easier than i thought). see iloftou's drawing for more info. I arrived directly on the thing to solder. OK it's small but not that small, i took my Hd2 to the electronic shop by the corner and he did the soldering in 5 min. Seems it wasn't a big problem for him..
Thank to all the community to achive these prodigies.
HD2 3 years old still rolling:laugh:
PS : Photos are in another thread : http://forum.xda-developers.com/showthread.php?t=849839&page=6

Related

car charger

Has anyone managed to find one yet?
I've tried a number of places (ever since expansys sent me what they thought was a touch pro charger but turned out to be for the old htc phones - new connector on Touch Pro and Diamond)
I hate to get caught with a flat battery.
Erm... The Touch Pro connector is the same as every other HTC phone I've come across (i.e. the Hermes and Kaiser) and is charged by mini USB.
I'm using the car charger I had for an old Motorola V3, it's actually an official Morotola branded charger but it works fine on the Raphael - all usb power is a standard 5V after all, so I knew no harm would come to it!
I've also ordered a solar charger with built in 2000mAh emergency battery too, it came this morning but nobody was in to take delivery, so I've got to go and get it from the royal mail place tomorrow!
looks like I might have been wrong, the connector shape is different, but my old charger still fits...
apologies all
you can use any 5v mini usb car charger. need not be an htc branded charger
My brother had one for his motorola krazr back in the day, it's a wall and car charger in one (you can flip out the different attachments)... He now has a samsung, so I swiped his.
I'm using the original one from HTC, the HTC CC C100.
Since my TyTNII I faced problems that other carchargers didn't provide enough power to load the TyTNII.
The original loader didn't face this problems.
And in Holland it was €20.00 so not much more than an unbranded one.
Now I'm using it with my Touch Pro
twisted-pixel said:
looks like I might have been wrong, the connector shape is different, but my old charger still fits...
apologies all
Click to expand...
Click to collapse
Mogul is same way. You can use regular USB, but modified has other sound features or whatever
OK I received the solar charger I mentioned in post #2 today. It's working now but I had a couple of issues with it! Here's a copy of the e-mail I sent to the company I bought it from:
ukdj78 said:
My solar charger has now arrived. First off I should like to point out that the information on your web site is incorrect as the instructions for my product say that the internal battery is only 1350 mAh not 2000.
Secondly, I could not get the internal battery to charge from my PC's usb port at first. I noticed the led light flickering very faintly so I prised apart the plug which connects to the unit and noticed that it had been soldered in such a way that two of the connections inside the plug were touching each other! I lightly bent them apart and plugged it back in and it works fine now.
Thirdly, I noticed that the product was also shipped with a mains adaptor to charge the internal battery (which I can't use in the UK as it has an American mains plug). My one rattled! Seeing as I wasn't planning to use it anyway, I thought I'd investigate what was causing the rattle and I found a piece of loose metal wire about 3 cm long inside the adaptor! As you would understand this was potentially very dangerous!
I do not wish to return my product as it is now working satisfactorily, but I thought you might like to pass my comments on to the product manufacturer. There was a card in the box that says QC Pass #06. Obviously this quality checker isn't very good at his job considering I found two potential short circuit issues!
Click to expand...
Click to collapse
Here is the rather quick response I got:
David from Donba.com said:
Hi, ukdj78:
Luckily we have customers like you who knows about things and understand that ultimately we do not have control of the product's quality as we are only the seller. I have forward your email to our purchaser and we will never order anything from the same manufacturer again. Poor quality products not only make us lose money, but our own company image. And like what you said, a risk for our customers.
As for your order. I will refund you the shipping charge to make it free shipping as a compensation for all the inconveniences you experienced.
Again, we are very much appreciated your understanding and your comments.
David
Click to expand...
Click to collapse
By the way, if anyone does like the idea of a solar charged emergency battery there's also this one from Handtec. Looking at the specs and dimensions and the fact that Handtec have added a note saying it's black not silver as pictured makes me think it's the exactly the same product as the one I've got. The only reason I ordered from Donba is that they were cheaper. I didn't realise at the time of ordering that even though Donba have their prices in £'s they're actually based in the US and ship directly from the manufacturer in Hong Kong, so it took quite a while for mine to arrive. Handtec are UK based, so you should get a UK power adaptor (if you get one at all) and it should arrive much quicker, they're reliable too, I bought my Touch Pro from them!
Obviously considering my experience though, it may be wise to find a different model that does the same thing just to be on the safe side!
I'm gonna buy a originally adapter 4 sure!
So I know 4 sure it's working correctly!

[Q] Charging pads

Im curious if anyone uses or has any luck with a wireless charging pad?
I know there are a few of them, energizer plans on coming out with one in Nov. and duracells can be found on their site...(sorry Im too new to post a link)
Im just curious if anyone can confirm they work on an EVO before I go shell out the cash.
EDIT: I can confirm that Duracell only supports
HTC
* TOUCH PRO
* DROIDERIS
* HERO
Still researching the others.
Powermat has an evo specific solution.
I'd love to know if the powermat battery cover can be used with the touchstone charger from palm.
That could be a nice solution for a secondary charger.
Cheers,
Swyped on my PC36100 using tapatalk!
ryedunn said:
Im curious if anyone uses or has any luck with a wireless charging pad?
I know there are a few of them, energizer plans on coming out with one in Nov. and duracells can be found on their site...(sorry Im too new to post a link)
Im just curious if anyone can confirm they work on an EVO before I go shell out the cash.
EDIT: I can confirm that Duracell only supports
HTC
* TOUCH PRO
* DROIDERIS
* HERO
Still researching the others.
Click to expand...
Click to collapse
The Duracell MyGrid works on the EVO. I tested one at work. Wasn't a big fan though, as you still have to plug in the charging clip, which felt like I might as well just use a normal charger.
Bp3dots said:
The Duracell MyGrid works on the EVO. I tested one at work. Wasn't a big fan though, as you still have to plug in the charging clip, which felt like I might as well just use a normal charger.
Click to expand...
Click to collapse
Exactly. I'm still waiting for this technology to mature. IMO, it's still waaaay too exepnsive to justify the cost. Seriously, how much more utility can you get from it? You can't hold it and charge it at the same time either. PowerMat's solution doesn't let you plug into the usb port w/o taking off the cover.
John Kotches said:
I'd love to know if the powermat battery cover can be used with the touchstone charger from palm.
!
Click to expand...
Click to collapse
I'd guess no since palm induction doesn't work on a powermat.
I just got back from a work trip and was thinking about picking up one if the powermat kits from best buy. This way, I figure I can return it if I'm not happy. I'll let yall know how it works out (if they have it in stock, that is).
I have a powermat for the evo i just got thursday, i came from a palm pre and thats the one thing i missed. i had a slight concern about it at first due to the back cover using up the micro usb port on the phone (i thought i'd have to remove it if i needed to charge it in the car or whatever) but the microusb section of the back cover can actually be removed for other charging devices to be plugged in.
I like it.
EDIT: it does not work with cases, it's slightly thicker and has a microUSB lip that comes out near the kickstand.

Busted Charging Port

Alright guys?
Accidentally leaned on my phone the other day whilst it was charging. Seems to have bent the charger port on the phone.
The phone still charges ONLY if the charger is plugged in and propped up in a certain way. needs to be pulled up slightly or there's no charge.
USB drive nor ADB work anymore so i'm guessing that a circuit has broken...
Does anybody know how these work?
If it's a case of broken connection, perhaps putting phone in an oven for a few mins will melt the the solder and hopefully fix the connection? (This worked fixing my 8800GT graphics card few years back!) Long shot
Ta
If it's truly broken then i'll probably get an SGS and then take a hammer to the HD2
The micro-usb port on HD2's is flimsy. It's probably snapped off from the mainboard, and putting pressure in the correct way is pushing it back together. Same thing happened to my HD2.
But there is some relatively good news. An external charger and an extra battery will only cost you about $16-18 USD on ebay. This has worked just fine for me for over a year. With dropbox installed on your phone and comp, you rarely have to connect via usb anyways.
if poss, check with another cable first.
I have a usb cable that looks fine but will only charge when angled downwards, no data, , yet if i bend it upwards it carries data but wont charge. my other usb cable works perfectly.
chances are it IS the port, as said they're pretty flimsy, however best to check, be a shame to bake your phone for the sake of a £2 cable.
same thing happened to me a few months ago,
the usb in the phone broke,
so i got a mains battery charger from ebay for about £4 and a few extra batterys,
been using them now for bout 2 months and all is good again,
it was a pain trying to get the usb in the right place for it to charge , i tryed the oven thing and it didnt work , not sure if i left it in there for long enough but i didnt want to ruin my phone completly.
easy option is to buy a mains battery charger
Thanks for the replies!
I'll look into a mains charger and 2-3 more batteries
So after my phone failing to charge at all last night I popped down to the local phone shop / stand in town and bought a universal battery charger.
+ and - aren't labelled on the charger so I assume it doesn't matter or it works out which is which?
It's a little slow and was a bit pricey, either way I have 63% battery now after a couple hours
Thanks
Wow mine's at 100% after a couple hours
Sent from my HTC HD2 using XDA App
Might grab a decent one from ebay and return the one I bought.
Sent from my HTC HD2 using XDA App
skymera said:
Might grab a decent one from ebay and return the one I bought.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
this is the one i got from ebay
http://www.ebay.co.uk/itm/AC-Wall-U...ories_MobilePhoneChargers&hash=item27b5da68d1
been working ok now for few months
skymera said:
If it's a case of broken connection, perhaps putting phone in an oven for a few mins will melt the the solder and hopefully fix the connection?
Click to expand...
Click to collapse
It will probably melt the plastic first, rendering your phone entirely useless...
DONT DO IT!

Galaxy Note Inductive Charging Mod

I modified my Galaxy Note to use inductive charging via a palm touchstone / patch.
Just a quick note. Not a whole lot to contribute here, because I largely followed the examples of the Qian Qi. That guy is awesome.
I don't think I voided a warranty, either. Only minimal teardown required (black plastic back, then the speaker section). Never came across a sticker I had to remove....
Useful links:
galaxy s inductive charging mod
evo 4g induction charging mod
galaxy note teardown video
galaxy note teardown pics
Notes:
- Buy a good soldering iron. Weller WESD51, set to 610 deg F, with 1/32" long conical tip, with lots of flux and lots of flux remover are the only reason I could do this. I can't stress enough the value of having good temperature control, knowledge of temperature, and so forth. I stumbled around with an "ordinary" soldering iron for a long time, and in hindsite, I can't believe I did so.
- Do not choke on the price. I already had a lot of soldering gear, and I bought $220 more. Spend the money. It's worth it.
- Watch the curious inventor youtube videos on soldering. This guy. Watch everything, several times. http://store.curiousinventor.com/
- You want 30 gauge wire. It's the only thing that just barely can be crammed in. I used the "Kynar" coated type. Buy at least 2 colors.
- as you look at the phone disassembled, with speaker on the bottom left, the +5 pin on the micro usb (MHL) port is the leftmost. I attached a wire to that, and a ground wire to the housing where the port was soldered.
- routed the wires under the speaker, then back, then into a VERY slight indentation into the battery compartment. used a blue "safe open" tool to help shape the wire / crimp ends. Once in the battery compartment, you're golden. Attach the inductive charging coil to the back of the samsung plastic back, add solder to the pads, and attach the wires.
- Attached is a picture with roughly how I routed wires. Red is +5V, Blue is ground. Be sure and double check if my recollection is right where the indentation is into the battery compartment. (that part is by memory).
- dont leave too much slack. it's really hard to get the samsung black pastic panel back on. Mine very slightly bulges.
- be careful where you put the charging sticky patch, because this phone is a little bit bigger than a palm pre. You have to consider if the phone can sit on the charger and "lock in" with the magnets. If you place it too high, it actually can't (in portrait)!
- Qian Qi had a really interesting point: most articles about how Li-ion batteries behave are wrong, and fully discharging the battery drastically reduces the number of cycles you have. So this is actually a very useful mod--whenever you don't use the phone, toss it on the charger.
Thanks for summing it up! Was actually thinking of doing this mod myself. Question: do you have a protective case on your Note? If so - what kind and how badly does it affect the magnetic properties?
No case. Especially because the note is so big, I think it would be unmanageable.
I took the samsung thin plastic back, and placed the Palm PRE (with charging coil still attached) on top of it, on the touchstone -- to figure out proper placement & mark with a pencil. I noticed a buzzing sound, coming from (I think) the induction coil on the palm pre back itself. I suspect if you use a case, this wont work well.
Also, the size/weight/placement of the galaxy note are such that the magnets are just barely strong enough to hold it. One time my phone was near, but off, the charger. I'm not sure if vibration from the phone did that, or my kids
In summary, I'm not sure how well it would work with a case. You might be able to research this on the net; among the 15 or 20 people that have bought a Pre, you might be able to find some info about the effect of a case on inductive charging.
tight squeeze?
im wanting to try this mod i have my touchstone on the way not thank you amazon but it seems like to me that the pad from the pre wouldnt fit under the cover of our phablet =/ could you post pics of the finished product and i think this is the only instance that i have seen someone attempt this with the note and i want to try it i love my note but would love it even more with inductive charging.
I am not the original author but I performed a different Touchstone mod and posted pics here:
http://forums.androidcentral.com/sa...1-galaxy-note-touchstone-mod-photo-heavy.html
Hope it helps!
-darren
Sent from my GT-N7000 using Tapatalk 2
Thank you!!!
Thank you so much for your post I have my materials on the way but I hadn't seen a detailed guide for the note other than this one and was worried I would have to solder directly to the usb pins which looked scary lol I did have two questions though would your mod work the same way for the at&t note? Specifically the points where you soldered to the phone and can wireless charging be performed through a case?
Hey, OP here. You may want to hold off just a bit. Mine is exhibiting some issues now. As in, it says "charging" but it doesn't do so wirelessly. The phone will stay "charging" but the battery % never goes up. (It was slow before, but would charge fully over a night).
Charging via USB still works.
It may be something simple; I'm not sure. But I need to crack it open and take a peek, and I haven't had time to do that yet because my phone is functional at the moment.
If nothing has conspicuously changed, there may be something about the design that isn't sustainable. Or maybe my solder joint halfway broke, or one of the wires got smashed enough so that it's partially broken...
I'll write back with my findings. Bug me if I don't
Thanks for the notice I was about to pull the trigger lol tbh I probably shouldn't attempt this I've never done a mod like this before and I'm not exactly a surgeon with a soldering iron lolvthatvbeing being said I'm going to attempt this on an old evo 4g I have before I do surgery on my baby lol plus I'm already familiar with the guts of an evo from screen repairs ill report back with my results
Sent from my SAMSUNG-SGH-I717 using xda premium
Success it took some doing but I got it I haven't done the mod on my note yet but I did it on my evo last night and it works its rough I haven't cleaned it up yet but I'll post the pics I got this mod from www.goodandevo.net
Sent from my SAMSUNG-SGH-I717 using xda premium
Thank you for this post.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
No prob I just wanted to see if i could do it and if I can do it with little soldering experience I'm sure most could do it I haven't done this mod to my galaxy note though as there is way less room in its a far more complicated mod than the evo because you have to make room for wires in a device samsung made as thin as possible and the way you have to route the wires I feel like the solder joints would just break
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
For those who want to try this out but still have warrantee just buy a backcover, a micro usb plug and assemble it according to the directions here.If you need the note just take out the usb plug and the back cover and you're good to go.... Or leave it there.....
For those who don't know what pins to use on the usb plug:
Pin: 1 is 5V+ (red)
Pin: 5 is GND (black)
Works like a charm.......
becosemsaida
Cool mod! Does it affect the stylus operation though?
pboesboes said:
Cool mod! Does it affect the stylus operation though?
Click to expand...
Click to collapse
yes it affects the stylus sometimes it reacts with delay and sometimes it clicks although only hovers over it
pboesboes said:
Cool mod! Does it affect the stylus operation though?
Click to expand...
Click to collapse
I was not a big stylus user; I can't stand the input lag. I didn't notice a difference, but I always considered the input speed unacceptable. Not sure why there would be any difference, anyway.
My big problem that I've never taken the time to address is that after some time, it's as though I can't pull enough current through the wires to charge. One day I need to crack this open & figure out why.
gr8 n interesting post
wonder how fast can a full charge be completed
regards
strategist99 said:
gr8 n interesting post
wonder how fast can a full charge be completed
regards
Click to expand...
Click to collapse
It is slower than normal, but completed in a night. I still have not dismantled my phone to attempt to repair this, but I want to soon

Magnetic Charging point - FELL OUT!

Guys I want to just make you all aware if you have any of those unofficial magnetic charging cables please be very wary of using them.
I noticed over the course of a week the phone would be sat on the desk and and I had a cable charging through the magnetic port but it would stop charging.
I **** you not the cable literally pulled out the charging port directly away from the phone. Now luckily the port has to 'fin' pins (only glued in by the looks of it) and I was able to push them back in and it would charge...however it certainly was not dust and waterproof anymore!!!
Any way I took it back to Carphone warehouse (told them i was using the DK36 official charger..do not tell them you use a third party one) and they sent it away for repair. I have been told today that they are just swapping it out for a new one which should be back with me next week.
WORD OF WARNING...IM NEVER USING AN UNOFFICIAL CABLE EVER AGAIN!
has this happened to any of you before? I purchased the one that is available from mobilefun.co.uk but I advise you not too as either the port is weak or the magnet on the cable is too strong (it did not feel that way though!!!).
Lets hope it does not happen again! this is the third Z2 I have had now with the new one I get. FML.
It might be the fault of the phone. I have an aftermarket magnetic cable and it works fine! I have had the cable for about 7 months.
your not the first
http://forum.xda-developers.com/showthread.php?t=2770301
Teknohtc said:
It might be the fault of the phone. I have an aftermarket magnetic cable and it works fine! I have had the cable for about 7 months.
Click to expand...
Click to collapse
Yes maybe. When the thing came out still attached to the cable (heart in mouth!) I noticed there was very little bonding (glue) on the rear of the charging point.
Still Sony have been very very lax in the quality control department, the amount of snags people are having is unreal. Like I said I'm onto the third now, such a shame because I actually love the device, my favourite phone of late, I have the M8, Z1 and got rid of the S5 (hated) but the Z2 is my fav!
Mine also came out this morning, I dont think they have been glued in they just slide into their slots.
Well there was defo glue or some sort of bonding agent on the rear face of mine...just not much!
I'm no phone designer but surely they should have manufactured the port with a lip to prevent it it from being pulled out!?!?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
I have no idea what you talking about.. can you provide your talking with some pictures showing the problem
Sent from Sony Xperia Z2 using XDA App
stargate1000 said:
Well there was defo glue or some sort of bonding agent on the rear face of mine...just not much!
I'm no phone designer but surely they should have manufactured the port with a lip to prevent it it from being pulled out!?!?
Click to expand...
Click to collapse
That's what I would have assumed too, but looking at my Z2's magnetic port, it does look like it's just made to the same size as the hole on the outside!
Tea-Aholic said:
That's what I would have assumed too, but looking at my Z2's magnetic port, it does look like it's just made to the same size as the hole on the outside!
Click to expand...
Click to collapse
Yep...it literally slots in and out. Awesome feature for when your glue fails on the rear of the port..NOT.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Just got my replacement from car phone warehouse yesterday. All seems to be in order...no gaps, dodgy drill holes, loose connectors, crap finishing etc...
Time will tell if I have received a good one this time.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Has your phone experienced any extreme heat, I'm thinking why the glue failed.
SolidR53 said:
Has your phone experienced any extreme heat, I'm thinking why the glue failed.
Click to expand...
Click to collapse
I wouldn't say so. Nothing over normal temps.
I would say that the amount of bond used was miniscule like a circle in the middle of the charging point. Not enough in my opinion as the surface area it covered was too small.
Sent from my D6503 using XDA Premium 4 mobile app
I see this appears to be common. How bad is this? I am about to get a Z2 with OEM dock but if this is a common thing perhaps I'll reconsider.
mr mystery said:
I see this appears to be common. How bad is this? I am about to get a Z2 with OEM dock but if this is a common thing perhaps I'll reconsider.
Click to expand...
Click to collapse
I have been using magnetic charger for two months now. So far it's still intact.
Same here, used magnetic charger seens I bought my Z2 (about 2 month ago) and it works great. Don't have stock desktop charger, bought an adapter cable.
Skickat från Tapatalk
I'm thinking about buying a magnetic charger, but I'm curious as to how people are disconnecting theirs to cause this issue.
My thoughts on it are if you pull it out horizontally, you are obviously putting strain on it by just pulling it off/out. I would have thought the best way to disconnect would be to basically "peel" it off, so that the magnet disconnects at a 90 degree angle. This would then not put any strain on the glue or whatever is used.
Sent from my D6503 using XDA Free mobile app
I have read a few reviews on some different mag cables and a lot of the aftermarket ones tout how strong the magnetic connection is compared to stock. Maybe the OEM cable was not too strong by design. Also wondering what kind of glue it is holding the port in. I just got my Z2 and I like it a lot so far. The mag cable looks like a great convenience which I'll be buying as soon as I decide I'm definitely keeping the phone (I'm commitment-challenged). Got my phone from B&H Photo and it says they are an authorized Sony dealer, but they are on the other side of the US so I really don't wanna have to ship my phone across country and then wait if I have an issue.
Right, well I have the Sony magnetic charger, I sent it back to sony as I thought it was to blame, it was working then stopped.
However when it was returned to me, I went to use it, the charge started and then stopped, so I thought it was the magnetic dock again, took the phone off the magnetic dock and these was a hole where the docking pins should be . Turns out they were on the magnetic dock! come out completely, so put the charger point bar back in the phone, reconnected and yes it charged but again, when I came to undock, phones charger area left on the dock. So it happens with the OEM dock as well.
Looks like a fight with Vodafone to get the phone repaired.
Yet another...
I have the official Sony Dock, so I can rule out it being 'just' due to the after-market docks. I had noticed before I even started using the magnetic dock that the connector was a bit mobile/loose. So much so that, whilst on holiday and shooting around water, I held my thumb over the connector. When, a couple of weeks later, I started to charge through the port, I noticed that it was making connect/disconnect noises as I was putting it onto the dock. I also noticed that it charged more slowly than via the USB port. Eventually (about a week after having read of the problem on these forums), the connector did stay on the charger, when the phone was removed. I have pushed it back in, but it just drops down, when on the charger, disconnecting from the phone. I am quite sure that it is no longer watertight, as there is a thin layer of quite 'spongy' adhesive tape on the back of the separated connector that is no longer adhesive and you can see quite well into the phone, through the connector holes. I believe that it is repairable (and the watertightness restorable) at little cost, given a competent person, who could strip the adhesive and replace it with something similar, but stronger AND put some strong adhesive around the outside of it, before pushing it back in. It's a shame that something so small is affecting so many people's opinion of Sony and marring an, otherwise, very good phone.
I will be attempting to return mine to the UK operator 'Three', this weekend and, if they are unwilling or unable to help, I will be taking to Twitter and other Social Media sites, to raise the profile to a wider audience... Sony are already doing relatively poorly in the mobile phone marketplace (for a company of their size) and they can sweep this under the carpet and try to ignore it, losing a small number of their 'fans', or they can make a big PR exercise. Any decent company would see this as a marketing opportunity - make direct contact with your customers and win their trust, by fixing a problem. It's their choice - act big or act small...

Categories

Resources