Hi i have tried to recover i9505 which was stuck on samsung logo assumed its just like another samsung phone so i downloaded any 4.3 firmware from internet and updated it using odin. Now phone is stuck at samsung logo with a message on top left corner recovery booting... I have tried different firmwares on it some of the were 4.3 but it still stuck there. on some firmware it gives error on odin and doesn't go further
state of the phone
can't boot into recovery holding vol + home +power
phone can go in to download mode
knox kernel lock: 0x0
knox warranty void: 0x1
csb-config-lsb: 0x30
write protection enabled
emmc Burst mode enabled
please help thanks
faisal_sherry said:
Hi i have tried to recover i9505 which was stuck on samsung logo assumed its just like another samsung phone so i downloaded any 4.3 firmware from internet and updated it using odin. Now phone is stuck at samsung logo with a message on top left corner recovery booting... I have tried different firmwares on it some of the were 4.3 but it still stuck there. on some firmware it gives error on odin and doesn't go further
state of the phone
can't boot into recovery holding vol + home +power
phone can go in to download mode
knox kernel lock: 0x0
knox warranty void: 0x1
csb-config-lsb: 0x30
write protection enabled
emmc Burst mode enabled
please help thanks
Click to expand...
Click to collapse
Hi there,
First try getting into recovery again!
Turn device off completely and leave for a minute or so......
Hold Power + Volume Up (no need for home button)
Wait for Vibration and Samsung Logo to appear then the writing in the top left corner....
Release the Power button but keep Volume Up pressed
Wait for Vibration and Samsung logo and writing to appear then let go of the volume rocker
Hopefully will boot to recovery
Factory reset the device and reboot......
If above fails try below............
You need to flash the latest firmware for your device........Which must be 4.3 firmware due to the KNOX boot loader you have, which if you did not know you have void your KNOX warranty 0x1 ( you cannot use the knox application anymore and this is currently irreversible ). Check what the latest firmware is HERE and flash through odin........If your phone is in boot loop after flashing or stuck at the logo then boot into recovery (if possible) and factory reset the device and re-boot.
Flashing any old firmware won't work
Related
Okay, so I have this Sprint Galaxy s5. I wanted to root it and I was directed to this forum that told me to download this file SM-G900P (Sprint): CF-Auto-Root-kltespr-kltespr-smg900p.zip and I downloaded Kies and Odin 307. I got a blue bar in Odin and i downloaded that Md5 file to my droid. I got a green PASS from Odin. But now my droid wont recover. It is stuck at the boot screen and the message on top:
Recovery is booting
Recovery is not Seandroid enforcing
Warranty: bit
I can't get it into recovery mode (up vol, power, home) and I removed the battery and the same thing happens.
Is it possible to recover? Or am I effd with a brick?
Should I just try to get my insurance to replace it?
Did you install a custom recovery, twrp or CWM?
SM-G900W8, 0x1
ragz said:
Did you install a custom recovery, twrp or CWM?
SM-G900W8, 0x1
Click to expand...
Click to collapse
nope, but i found out that I just needed to take out the battery and put i back in. this allowed me to put it in download so i could flash vanilla back on to it.
I have JasminRom installed v5.01 or v5.02. I was trying to do Xposed install and tried to install the latest TWRP. TWRP was version 4.4.? So I realized that it was the wrong version too late.
When I power on the phone, it goes to the
Recovery Booting...
Recovery is not seandroid enforcing
then it says
Secure Fail: Recovery.
System software not authorized by Verizon Wireless has been found on your phone.
It displays the above messages when I boot via the power button or do volume up/home/power.
When I hold down/home and power to boot I the boot menu "Volume up: Continue and Volume down: Cancel.
Volume up gives me the ODIN Mode, product name: SM=N900V. Current Binary: Samsung Official. System status: Custom. Reactivation Lock: off. qualcom seucreboot: Enable. Secure download enable.
UDC START.
Downloading...Do not turn off target!!
I had safestrap installed, but it would never boot to it.
I cannot get to safestrap thus to load anything.
With Lollipop 5, I don't think I can use Odin.
How do I recover from this mess up?
I just ODIN over: FLASH N900VVRUEOB6_PartialFirmware.tar.md5 via Odin in AP slot
and it seems to have fixed it, thank God.
Need to install the latest Jasmin now with Xposed... Hope it works.
Samsung S4 M919V
Rooted using Odin
CWM & Titanium Backup saved on MicroSD Card and External HD
Used cm-11-20140217-NIGHTLY-jfltecan.zip
Problem
Installed CyanogenMod
Phone is currently stuck in a boot loop
Regular Startup Sequence:
Cyanegen Mod boot logo appears
Android is upgrading
Optimizing/Starting apps
Unfortunately, the process has stopped working.
Restarts.
Recovery mode (Bottom Volume key, power button, home button
"Warning!!" page, Volume up: Continue.
Stuck at "Downloading... Do not turn off target!!
Top Left corner:
Odin Mode
Product Name: SGH-M919V
Current Binary: Custom
System Settings: Custom
Knox Kernel Lock: 0x0
Knox warranty void: 0x1
CSB-CONFIG-LSB: 0x30
Secure Download: Enabled
Write Protection: Enable
eMMC Burst Mode: Enable
Click to expand...
Click to collapse
Connected to laptop
Odin only recognizes phone with regular boot up.
I'd really appreciate any help or suggestions you guys have for me.
Thanks.
My samsung galaxy j5 is rooted and i just Formatted it using the settings in backup. Then my phone went black and every time I press and hold the POWER button it shows the samsung logo and the text "set warranty bit: recovery". I also already tried HOlding the power, volume up, and home button together. It also doesn't work. Please help me. Thank you in advance.
It hapenned to me too, it hapens when your device is rooted and you reboot to recovery from system.
The only solution I found was to reflash stock firmware with odin, root it again and be sure to boot into recovery manually (not from system).
Hello I cant Factory reset my phone it says set warranty bit recovery What do i do I want to get into recovery But I cant My Phone is A Samsung galaxy J5 Android 5.1--
And My phone is rooted
thanks In advance
deleted
Flash stock firmware via odin using download mode. You can download the firmware from http://www.sammobile.com/firmwares/
Hello,
A few months ago my younger brothers SM-G900I had the classic problem of receiving an update that resulted in the device booting the displaying "Set Warranty Bit:Kernel."
Recently my brother asked me to try fix it. When I tried to boot to recovery mode to fix this I saw the normal "Booting recovery mode" but below that I also saw "Set Warranty Bit: Recovery," This then results in recovery mode not booting and going back to the normal black screen and nothing happening ordeal.
At the time of this happening I have been told by my farther that he booted into recovery mode and did a full system wipe
After doing that wipe the phone hasn't since booted into Recovery mode, I believe that there's nothing I can do to fix the phone due to Recovery mode not booting which means I can't use ODIN to fix the "Set Warranty Bit:Kernel" as I can't go into download mode.
If there is anything I can do please let me know many thanks, Xavier1501
ODIN is separate from recovery, and you don't need to launch it from recovery.
Vol up + Home + Power = Recovery
Vol down + Home + Power = ODIN