so this afternoon i tried to install kitkat but it just kep failing,
can someone tell me where i can download the stock firmware to use oddin to reinstall the old firmware please
i updateed to M16
thanks
Mathew202 said:
so this afternoon i tried to install kitkat but it just kep failing,
can someone tell me where i can download the stock firmware to use oddin to reinstall the old firmware please
i updateed to M16
thanks
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/
:good:
Mathew202 said:
so this afternoon i tried to install kitkat but it just kep failing,
can someone tell me where i can download the stock firmware to use oddin to reinstall the old firmware please
i updateed to M16
thanks
Click to expand...
Click to collapse
You can't go back once you've gone through Kitkat upgrade, chances are even though it has failed it will still have upgraded your bootloader.. you have to re-flash KK again
i have been trying all afternoon to get this working but nothing, i have come close now to reflashing 20 times and still nothing.
ok so i cant even install CWM
im not to fussed about knox being tripped
this is wht i currently have on my screen
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: CUSTOM
SYSTEM STATUS: OFFICAL
REACTIVATION LOCK: OFF
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
QUALCOM SECUREBOOT: ENABLED (CSB)
RP SWREV: S2, T2, A2, A3< P2
WRITE PROTECTION: ENABLE
UDC START
can someone help me please. im pullin my hair out.
this is what i get from odin
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Mathew202 said:
ok so i cant even install CWM
im not to fussed about knox being tripped
this is wht i currently have on my screen
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: CUSTOM
SYSTEM STATUS: OFFICAL
REACTIVATION LOCK: OFF
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
QUALCOM SECUREBOOT: ENABLED (CSB)
RP SWREV: S2, T2, A2, A3< P2
WRITE PROTECTION: ENABLE
UDC START
can someone help me please. im pullin my hair out.
Click to expand...
Click to collapse
At this point I believe you have 2 choices:
a) wait for 4.4.2 for your region - that might be the only way to keep knox 0x0
b) use the method described somewhere around here for Hong-Kong N9005 that were bricked with 4.4.2 - but that will make your knox 0x1
if you find the link can you post it please.
thanks
Use another usb port it happened to me with my n2
Sent from my GT-N7100 using XDA Premium 4 mobile app
Mathew202 said:
if you find the link can you post it please.
thanks
Click to expand...
Click to collapse
If you quote my post I get notified that you replied, if not I must guess it
Also this:
http://forum.xda-developers.com/showthread.php?t=2612190
but IMHO you should read around more before doing anything. And remember that you will have knox 0x1 = no warranty.
well ive just tripped knox
i have external insurance for my phone, worse case is i throw it down the stairs and claim on home insurance,
Someone can now close this thread.
i seem to have fixed my issue.
im a Mac user and i was using VMWare to emulate windows, i saw somewhere someone had put a thread up about not using it as its crap. so i installed bootcamp and the rom installed 1st time no problems,
Long story short, I've been trying to get my phone back to stock unrooted rom from TriForce rom and each time i do it, it will not install and fail. I've tried triangle away but that didn't do anything either.
Can anyone help me get back to stock rom?
I made a post about this so long ago I can't find it (thank you work for keeping me busy but still not rich)
Phone Screen in Download mode
(Red) Odin Mode
(White)Product Name: SPH-L720
Current Binary: Custom
System Status: Official
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
(Gray)WRITE PROTECTION: Enable
eMMC BURST MODE enabled
(Red) START [224,1140]
SECURE CHECK FAIL : aboot
ODIN v1.85 on PC v1.85
<ID:0/005> File analysis...
<ID:0/005> SetupConnection...
<ID:0/005> Initialization...
<ID:0/005> Get PIT for mapping...
<ID:0/005> Firmware update start...
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All Threads completed (succeed 0 /failed 1)
Nin204292 said:
Long story short, I've been trying to get my phone back to stock unrooted rom from TriForce rom and each time i do it, it will n......
Click to expand...
Click to collapse
If youre on 4.3, Flash 4.3 or more...
If youre on 4.4.2, FLASH ONLY 4.4.2, not even 4.3...
Do not try flashing anything lower, a downgrade is not possible anyhow....
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Nin204292 said:
Long story short, I've been trying to get my phone back to stock unrooted rom from TriForce rom and each time i do it, it will not install and fail. I've tried triangle away but that didn't do anything either.
Can anyone help me get back to stock rom?
I made a post about this so long ago I can't find it (thank you work for keeping me busy but still not rich)
Phone Screen in Download mode
(Red) Odin Mode
(White)Product Name: SPH-L720
Current Binary: Custom
System Status: Official
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
(Gray)WRITE PROTECTION: Enable
eMMC BURST MODE enabled
(Red) START [224,1140]
SECURE CHECK FAIL : aboot
ODIN v1.85 on PC v1.85
<ID:0/005> File analysis...
<ID:0/005> SetupConnection...
<ID:0/005> Initialization...
<ID:0/005> Get PIT for mapping...
<ID:0/005> Firmware update start...
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All Threads completed (succeed 0 /failed 1)
Click to expand...
Click to collapse
Hi ,
Also use Odin 3.09....
Hello.
I got a new Galaxy S4 (I9500) this October, and decided I would go ahead and install custom recovery on it. Me thinking I can get anything to work did not heed the warnings that this model does not support it go ahead and try anyway. After several failed attempts I find some software on the Play store that seems promising. Long story short, I no longer have a functioning recovery partition, and my phone will always try to boot into recovery mode unless I boot in Odin mode.
I have tried to follow several guides, most of which tell me the same thing:
Get Samsung drivers (not Kies)
Download Odin (one version or another)
Get the I9500 Firmware and install using Odin.
My phone is (from the sticker below the battery):
MODEL:GT-I9500
FCC ID: A3LGTI9500
SSN:-I9500GSMH
It is also factory unlocked.
I did notice however that the text in the top left when in Odin mode says it is a SGH-I337
The full text:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
I have tried flashing both 4.4.2 (as it was delivered with) and 5.0.1, but I get the same error:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The error that is displayed on the phone is:
SECURE MAGICCODE CHECK FAIL : boot
Any help would be greatly appreciated!
Edit: Added phone error
Hello
I wanted to use my Samsung Note 4 again.
When i started it, i came into the recovery mode.The phone seems not to start into the os.
The phone was working normaly before.
I made a factory reset and tried to restart the phone. But it got stuck.
So i removed the batterie and put it back in to turn the phone on, but i wouldnt. I removed the battery and waited a bit.
I again came into recovery mode.
Then i decided just to flash a new firmware via odin.
So i downloaded the official firmware form samfirm and tried to flash it but an error came: 'There is no pit partition'.
On the Note 4 Error: no pit binary
i googled a bit and found out i have to flash the PIT. So i downloaded the right pit for the firmware and tried again. Same Error
I dont know why its not working
I got the firmwares from sammobile. I tried 3 different.
My phone is from austria, so i tried TTR, MOB and DRE. For Pit i have SFR and VFG
What am i doing wrong? what am i missing?
Here is the log from Odin:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 3384 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone:
ddl: mmc_read failed
ODIN MODE (High Speed)
Product Name: SM-N910F
Current Binary: Samsung official
System Status: Custom
Reactivation Lock: OFF
Knox Warranty void: 0x0
Qualcomm Secureboot: Enable (CSB)
RP SWREV: S1, T1, R1, A1, P1
Secure Download: Enable
UDC Start
ODIN: flash read failure
Error: There is no pit binary
hope to get some help. I never modded or rooted this phone. Everything was stock.
Hello.
Today i tried to flash the stock firmware I9505XXUHPK2 BTU again because i was trying out some custom rom found on xda but decided to get back to stock.
After wiping my current os by TWRP i went to download mode and flash the firmware but failed.It says
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
Now my custom recovery TWRP is gone and it shows
odin mode
product name: gt-i9505
current binary: Custom
system status: Custom
knox kernel lock: 0x0
knox warranty viod: 0x1
csb-config-lsb: 0x30
write protection: enable
eMMC burst mode enabled
please help.TIA
Flash again without the pit file. A pit file is needed if Odin can't read the memory chip's partition table.
Also try using different usb ports and usb cables.