Database Users

[Q] Unable to return to stock rom

Long story short, I've been trying to get my phone back to stock unrooted rom from TriForce rom and each time i do it, it will not install and fail. I've tried triangle away but that didn't do anything either.
Can anyone help me get back to stock rom?
I made a post about this so long ago I can't find it (thank you work for keeping me busy but still not rich)
Phone Screen in Download mode
(Red) Odin Mode
(White)Product Name: SPH-L720
Current Binary: Custom
System Status: Official
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
(Gray)WRITE PROTECTION: Enable
eMMC BURST MODE enabled
(Red) START [224,1140]
SECURE CHECK FAIL : aboot
ODIN v1.85 on PC v1.85
<ID:0/005> File analysis...
<ID:0/005> SetupConnection...
<ID:0/005> Initialization...
<ID:0/005> Get PIT for mapping...
<ID:0/005> Firmware update start...
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All Threads completed (succeed 0 /failed 1)

Nin204292 said:
Long story short, I've been trying to get my phone back to stock unrooted rom from TriForce rom and each time i do it, it will n......
Click to expand...
Click to collapse
If youre on 4.3, Flash 4.3 or more...
If youre on 4.4.2, FLASH ONLY 4.4.2, not even 4.3...
Do not try flashing anything lower, a downgrade is not possible anyhow....
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.

Nin204292 said:
Long story short, I've been trying to get my phone back to stock unrooted rom from TriForce rom and each time i do it, it will not install and fail. I've tried triangle away but that didn't do anything either.
Can anyone help me get back to stock rom?
I made a post about this so long ago I can't find it (thank you work for keeping me busy but still not rich)
Phone Screen in Download mode
(Red) Odin Mode
(White)Product Name: SPH-L720
Current Binary: Custom
System Status: Official
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
(Gray)WRITE PROTECTION: Enable
eMMC BURST MODE enabled
(Red) START [224,1140]
SECURE CHECK FAIL : aboot
ODIN v1.85 on PC v1.85
<ID:0/005> File analysis...
<ID:0/005> SetupConnection...
<ID:0/005> Initialization...
<ID:0/005> Get PIT for mapping...
<ID:0/005> Firmware update start...
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All Threads completed (succeed 0 /failed 1)
Click to expand...
Click to collapse
Hi ,
Also use Odin 3.09....

Urgent help (stuck in Firmware upgrade)

Hey guys I am having some serious difficulties with my verizon note 3. Last night my phone started boot looping so I decided to wipe and recover from my backup. I did the factory reset and all was well but safestrap would not recognize my backup so I attempted to install the stock Jasmine Rom (which I was using when the boot loop happened). Every time I tried to install I would get the E: unable to mount 'system' and 'systemorig'. I tried to wipe the system and it did not work, so I tried to format the internal memory which did not work. Today I tried to flash stock ROM using Odin 3.09. I also downloaded the "pit" file to attempt to repartition the drive and Odin is failing as well because of an authorization error I believe.
Here is the Odin information:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the Firmware upgrade screen on my phone it reads
ODIN MODE
Product Name: SM-N900V
Current Binary: Samsung Official
System Status: Official
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
Qualcomm Secureboot: Enable (CSB)
RP SWREV: S1, T1, R1, A3, P1
Write Protection: Enable
UDC START
SW REV CHECK FAIL: [aboot]Fused 3 (greater than) Binary 1
Any help would be greatly appreciated. Have I successfully bricked my phone?
Sorry if this has been covered before but I could not find anything that has worked, and I have tried so many things that people say to do on forums that I may have caused more damage to my phone than there was in the first place :crying:
Since last night I have not had a phone and I need to get this thing working ASAP because I need it for work.

You're not running VMWare are you? I had a similar error when trying to use ODIN on a work VMWare machine - it always failed. Once I went home to my desktop - ODIN successfully flashed.

BigMcGuire said:
You're not running VMWare are you? I had a similar error when trying to use ODIN on a work VMWare machine - it always failed. Once I went home to my desktop - ODIN successfully flashed.
Click to expand...
Click to collapse
No I am not running VMWare, but trying it on a different computer isn't a bad idea. I'll try it on my other desktop as soon as I get ODIN and the drivers installed. Thanks for the idea
Edit: Tried on a different computer, downloaded a different stock .tar.md5 file, did not try to flash the 'pit' file (re-partition)(some other forum told me to do that), and made sure that only auto reboot and f. reset time were checked. Odin passed and I am currently back on stock firmware with a working phone! Thank you BigMcguire and the rest of the XDA forums that i looked through to help me fix this!

[Q] GT-I9505 Problems after water damage repair.

First of all, I did some research, en noticed someone with the same problems. (http://forum.xda-developers.com/showthread.php?t=2707763)
He did not get an answer.
I cleaned the phone, and tried to boot.
- It hangs at spash screen. (so cant boot into android)
- can't go in recovery mode
- CAN GO IN DOWNLOAD MODE
- Is recognized by Odin
- Can flash images
- Device is not rooted
UPDATE:
-Tried to flash a rom on the device using downloadmode/ODIN
Rom version: I9505XXUFNC9-OXAFNB8-PRE-ROOTED-KNOX-FREE-ODEX-FULL
UPDATE2:
Tried original Vodafone rom wih original PIT file, does not work.
This is a phone bough in Holland with a Vodafone rom.
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> recovery.img
<ID:0/003> rpm.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> system.img.ext4
<ID:0/003> tz.mbn
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
After this the device shuts down, and tries to boot into recovery mode (after manually restarting), wich hangs.
After this i tried rebooting via download mode. Again phone hangs at spash screen.
Can anyone provide me with a solution. I would like to be able to boot into recovery and/or flash a new rom (witch is not possible atm because of the device not being rooted)
If I forgot something. Ask me, and i'll update the start post with the info necessary.
Thanks in advance.

Can you add a pic of your "DOWNLOAD MODE" pls? Ty :highfive:
* Maybe?: You are flashing wrong firmware if you own a SGH-I337. You must flash this firmware via ODIN: HERE

galaxynote3update
com
/wp-content/
uploads/2013/10/
Samsung-Galaxy-Note-3-Download-Mode.jpg
It's not an actual photo of my device, but it looks the same as mine. ( i cant post picures yet, so mangled the link)

Addict_1337 said:
galaxynote3update
com
/wp-content/
uploads/2013/10/
Samsung-Galaxy-Note-3-Download-Mode.jpg
It's not an actual photo of my device, but it looks the same as mine. ( i cant post picures yet, so mangled the link)
Click to expand...
Click to collapse
Lol, ok. I need the info that appears in your DOWNLOAD MODE. The text. Write it pls :fingers-crossed:

Joku1981 said:
Lol, ok. I need the info that appears in your DOWNLOAD MODE. The text. Write it pls :fingers-crossed:
Click to expand...
Click to collapse
ODIN MODE: (in red)
PRODUCT NAME: GT--I9505
Current binary: Samsung official
system status: official
knox kernel lock: 0x0
knox warrenty void: 0x1 (been trying some roms)
csb-config-lsb: 0x30
Write protection: Enable
eMMC BURST MODE: Enable
I you need more info, let me know

Addict_1337 said:
ODIN MODE: (in red)
PRODUCT NAME: GT--I9505
Current binary: Samsung official
system status: official
knox kernel lock: 0x0
knox warrenty void: 0x1 (been trying some roms)
csb-config-lsb: 0x30
Write protection: Enable
eMMC BURST MODE: Enable
I you need more info, let me know
Click to expand...
Click to collapse
Try to flash THIS firmware normally (without .pit file). Like in the pic attached.

Note 4 Boot Loop - Tried KIES and Flashing Stock ROM - Still Looping

Hey ya'll, this past Saturday my Note 4 started a boot loop while using Baconreader. I was using stock ROM, unrooted, T-Mobile. I first deleted the cache partition, then did a factory reset, but neither worked.
I tried flashing with Odin v3.09, using ROMS from SamMobile:
4.4.4 ANK4
5.0.1 COD6
5.0.1 COG2
Each time I would get
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone in download mode was:
Odin Mode (High Speed)
Product Name: SM-N910T
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox Warranty Void: 0x0
Qualcomm Secureboot: Enable (CSB)
AP Swerv: S1, T1, R1, A2, P1
Secure Download: Enable
UDC Start
SW Rev Check Fail : [aboot]Fused 2 > Binary 1
[1]eMMC write fail: ABOOT
I then used the latest ROM from SamMobile, 6.0.1 EPE3, and everything worked. Odin flashed it and the installation was good. But as soon as it finished and booted for the first time the boot loop started again. I tried using KIES to do a emergency firmware restore but it would not pick up my Note 4 (Using a Samsung USB Cord) I tried it with and without Samsung USB Drivers installed. I'm starting to think it may be a hardware problem, honestly though I have no idea. I would like to get some other opinions before I send off for a new one. (No warranty over a year old) Thanks in advance, and sorry if the formatting is long, I figured it would be easier to read if everything was spaced out. Thanks in advance.

Note 4, no binary PIT found

Hello
I wanted to use my Samsung Note 4 again.
When i started it, i came into the recovery mode.The phone seems not to start into the os.
The phone was working normaly before.
I made a factory reset and tried to restart the phone. But it got stuck.
So i removed the batterie and put it back in to turn the phone on, but i wouldnt. I removed the battery and waited a bit.
I again came into recovery mode.
Then i decided just to flash a new firmware via odin.
So i downloaded the official firmware form samfirm and tried to flash it but an error came: 'There is no pit partition'.
On the Note 4 Error: no pit binary
i googled a bit and found out i have to flash the PIT. So i downloaded the right pit for the firmware and tried again. Same Error
I dont know why its not working
I got the firmwares from sammobile. I tried 3 different.
My phone is from austria, so i tried TTR, MOB and DRE. For Pit i have SFR and VFG
What am i doing wrong? what am i missing?
Here is the log from Odin:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 3384 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone:
ddl: mmc_read failed
ODIN MODE (High Speed)
Product Name: SM-N910F
Current Binary: Samsung official
System Status: Custom
Reactivation Lock: OFF
Knox Warranty void: 0x0
Qualcomm Secureboot: Enable (CSB)
RP SWREV: S1, T1, R1, A1, P1
Secure Download: Enable
UDC Start
ODIN: flash read failure
Error: There is no pit binary
hope to get some help. I never modded or rooted this phone. Everything was stock.