[Q] No Bootloader on LG D802 - G2 Q&A, Help & Troubleshooting

Okei, so I have tried vol up and volum down holding power and everything...
When I use the vol down I just get straight into Factory Format/Reset
When I go with vol up I get in to download mode
Am I stupid or does this phone not contain any Bootloader like Samsung?
I wanna flash Philz Recovery and I just put it on my phone, was gonna go with Vol Down + Power and flash it from there..
But no, you can not do that! I have read all over and searched Youtube and everything, put there is no one explaining how to install Philz Recovery on my phone...
So I should go with CWM or TWRP then?

mr.lysgaard said:
Okei, so I have tried vol up and volum down holding power and everything...
When I use the vol down I just get straight into Factory Format/Reset
When I go with vol up I get in to download mode
Am I stupid or does this phone not contain any Bootloader like Samsung?
I wanna flash Philz Recovery and I just put it on my phone, was gonna go with Vol Down + Power and flash it from there..
But no, you can not do that! I have read all over and searched Youtube and everything, put there is no one explaining how to install Philz Recovery on my phone...
So I should go with CWM or TWRP then?
Click to expand...
Click to collapse
Flash your recovery via adb.
Follow option 1
http://forum.xda-developers.com/showthread.php?p=45713343
Sent from chdhsheh fhhdud

Related

[Q] Can't boot recovery with button combo

It's very strange - I can't get to recovery by holding down power + vol-up + home buttons. The message comes up that it's booting recovery but then disappears for a second and then either powers off or boots normally.
I can boot into recovery through the toolkit/odin/goomanager however and I've also found that I can boot into recovery if I first go into download mode, press vol-down to cancel download and boot normally and then immediately press the vol-up/power/home button combination.
I have TWRP installed but I previously had philz CWM and this problem happened with both. If i remember rightly the first recovery I tried to install was the original CWM with odin but when I booted into recovery it was still the stock recovery. I'm not sure if this information is necessary though.
Can anyone help me with this or why this could be happening?
re: recovery mode
welshyoot said:
It's very strange - I can't get to recovery by holding down power + vol-up + home buttons. The message comes up that it's booting recovery but then disappears for a second and then either powers off or boots normally.
I can boot into recovery through the toolkit/odin/goomanager however and I've also found that I can boot into recovery if I first go into download mode, press vol-down to cancel download and boot normally and then immediately press the vol-up/power/home button combination.
I have TWRP installed but I previously had philz CWM and this problem happened with both. If i remember rightly the first recovery I tried to install was the original CWM with odin but when I booted into recovery it was still the stock recovery. I'm not sure if this information is necessary though.
Can anyone help me with this or why this could be happening?
Click to expand...
Click to collapse
When was the last time you updated SuperSU?
Go to the playstore and download/install the latest version reboot the phone normally and after reboot reboot into recovery.
Good luck!
Thanks, that worked. I can now get into recovery with the button combo.
Sent from my GT-I9505 using Tapatalk

Stuck in Recovery

Well...not permanently. I can boot out of it.
I just rooted successfully with the method here.
When I boot into recovery, I see the horizontal android with his chest open and a red triangle. I can boot up by holding the volume (either up or down) and the power button.
ClockworkMod tells me I have both clockworkmod and TWRP installed. How do I successfully boot into Recovery?
Thanks guys!
Boot into recovery with vol down+power then use the vol rocker to cycle to recovery mode. Use power button to execute. Pretty sure it says all that when you see the android screen..
Sent from my LG-LS980
Thanks but I don't have that option in Recovery.
An update: I followed the instructions here about installing a recovery tool by pushing it through adb. What I get now is the following:
[730] Fastboot Mode Started
[780] udc_start()
Is this a soft brick? If so, how do I reverse it? I'm very frustrated!
Thanks,
Phil
bearsblack said:
Boot into recovery with vol down+power then use the vol rocker to cycle to recovery mode. Use power button to execute. Pretty sure it says all that when you see the android screen..
Sent from my LG-LS980
Click to expand...
Click to collapse
Can you get into download mode? Volume up + power. If so next go to lg g2 general forum and read the flash lg g2 to stock.
If your stuck in fast boot then there is another hoop to jump through. I'll get you the info in The morning.
Sent from my Nexus 5 using Tapatalk
Download mode does work. I'll go through the steps you referred to. Thanks.
copualt3 said:
Can you get into download mode? Volume up + power. If so next go to lg g2 general forum and read the flash lg g2 to stock.
If your stuck in fast boot then there is another hoop to jump through. I'll get you the info in The morning.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Almost there. Got it rerooted, successfully installed TWRP. Flashed cyanogenmod (newest nightly). Forgot to install GAPPS though!
I don't see an option to reboot into recovery from cyanogenmod.
What's the process for rebooting into recovery? I've tried different combinations with the volume and power buttons but it doesn't seem to work.
Thanks,
Phil
jaxxnux said:
Download mode does work. I'll go through the steps you referred to. Thanks.
Click to expand...
Click to collapse
recovery is volume down + power

[Q] (i9500) I flashed the leak of Lollipop and can't initiate in recovery mode

Hi, I flashed this monday the leak of Lollipop for Samsung Galaxy S4 (9500) and after I followed all the steps one by one I'm the only one in earth that isn't able to start the phone in the recovery mode. For this reason I can't flash gapps. I am not able to downgrade even because for the KNOX.
Someone has the same problem? Can anyone figured out how to enter in recovery mode?
P.D: I have attempted to do it with the buttons (vol down + pow + home) and with adb and the usb connected to the phone. Anyone was the solution.
masicen said:
Hi, I flashed this monday the leak of Lollipop for Samsung Galaxy S4 (9500) and after I followed all the steps one by one I'm the only one in earth that isn't able to start the phone in the recovery mode. For this reason I can't flash gapps. I am not able to downgrade even because for the KNOX.
Someone has the same problem? Can anyone figured out how to enter in recovery mode?
P.D: I have attempted to do it with the buttons (vol down + pow + home) and with adb and the usb connected to the phone. Anyone was the solution.
Click to expand...
Click to collapse
after flashing Rom with Odin you have to flash openrecovery-twrp-2.8.4.0-klte.tar
Installing Recovery and rooting steps :
1- download twrp from here
2- go to flash mode
3- run Odin load file as AP then click start
4- go to recovery by powering off your device and hold volume up + home + power button
5- when you want to reboot to system Twrp will ask you to install SuperSU (rooting your device)
6- swipe to confirm
More info here
haririan said:
after flashing Rom with Odin you have to flash openrecovery-twrp-2.8.4.0-klte.tar
Installing Recovery and rooting steps :
1- download twrp from here
2- go to flash mode
3- run Odin load file as AP then click start
4- go to recovery by powering off your device and hold volume up + home + power button
5- when you want to reboot to system Twrp will ask you to install SuperSU (rooting your device)
6- swipe to confirm
More info here
Click to expand...
Click to collapse
I did all of this, still can't to initiate in recovery mode.
i had the same problem, try downloading philz (philz_touch_6.48.4-i9500) or twrp recovery (openrecovery-twrp-2.8.4.0-i9500) and install via odin (AP box)
I didn't try the above i just installed the rom again, doing this:
- only the AP file
- uncheck "auto reboot"
- After the process finishes dont reboot the phone to tw, just go to the recovery mode and the wipe cache/data
- Install philz or twrp via odin
dnnz said:
i had the same problem, try downloading philz (philz_touch_6.48.4-i9500) or twrp recovery (openrecovery-twrp-2.8.4.0-i9500) and install via odin (AP box)
I didn't try the above i just installed the rom again, doing this:
- only the AP file
- uncheck "auto reboot"
- After the process finishes dont reboot the phone to tw, just go to the recovery mode and the wipe cache/data
- Install philz or twrp via odin
Click to expand...
Click to collapse
So, flash the ROM again with nothing more than the AP box fullfiled and then, when it finishes hold (vol up + power + home). Wipe cache, restart and flash custom recovery.
Am I right?
masicen said:
.........................P.D: I have attempted to do it with the buttons (vol down + pow + home) and with adb and the usb connected to the phone. Anyone was the solution.
Click to expand...
Click to collapse
masicen said:
So, flash the ROM again with nothing more than the AP box fullfiled and then, when it finishes hold (vol up + power + home). Wipe cache, restart and flash custom recovery.
Am I right?
Click to expand...
Click to collapse
It can not, because in the first flash has deleted the modem, bootloader, csc and others, so if flashing only AP will not operate the phone, only the PDA.
And masicen these questions have to do in the same thread firmware also behold the solution.
Flashes the firmware again, to start turn it off and go into Recovery by: Volume Up + Home + Power in this order and holding down until you see the Samsung logo there S4 loose and enter the stock recovery, do wipes and restart it, then download Philz Touch in its latest version and flash it with Odin and restart turn it off and try to enter the recovery now.-
lobomarino said:
It can not, because in the first flash has deleted the modem, bootloader, csc and others, so if flashing only AP will not operate the phone, only the PDA.
And masicen these questions have to do in the same thread firmware also behold the solution.
Flashes the firmware again, to start turn it off and go into Recovery by: Volume Up + Home + Power in this order and holding down until you see the Samsung logo there S4 loose and enter the stock recovery, do wipes and restart it, then download Philz Touch in its latest version and flash it with Odin and restart turn it off and try to enter the recovery now.-
Click to expand...
Click to collapse
Hi, I wasn't able to test it before but now I had my computer and I did all that you suggested and could iniciate in the recovery mode but when I tried to flash gapps an error appeared (status 6) and now I can't manage to flash it :'(
Any solution to that??
p.d: thanks for your help.

How do I boot into recovery from a bootloop?

I flashed a wrong file in twrp and my phone went into a bootloop. I want to boot into recovery to reflash the ROM but I can't do it, the phone is stuck into a continuous bootloop (stuck at the Samsung logo and vibrating over and over again). I can boot into download mode using vol down + power + home, but vol up for recovery isn't working.
lvnatic said:
I flashed a wrong file in twrp and my phone went into a bootloop. I want to boot into recovery to reflash the ROM but I can't do it, the phone is stuck into a continuous bootloop (stuck at the Samsung logo and vibrating over and over again). I can boot into download mode using vol down + power + home, but vol up for recovery isn't working.
Click to expand...
Click to collapse
1. Boot in DOWNLOAD MODE and flash the correct TWRP via ODIN again. Done.
2. If the step 1 doesn't work. Boot in DOWNLOAD MODE, reflash STOCK rom and reflash the TWRP, the one good for your device. Done.
Joku1981 said:
1. Boot in DOWNLOAD MODE and flash the correct TWRP via ODIN again. Done.
2. If the step 1 doesn't work. Boot in DOWNLOAD MODE, reflash STOCK rom and reflash the TWRP, the one good for your device. Done.
Click to expand...
Click to collapse
Secret mode wasn't working in the Samsung browser so I flashed a zip that I found on xda that supposedly fixes this issue and cleared the cache and dalvik cache. I don't see how this could have erased twrp from my device. I currently don't have acces to a computer so I can't use Odin, is there really no way to force shutdown it or something?
lvnatic said:
Secret mode wasn't working in the Samsung browser so I flashed a zip that I found on xda that supposedly fixes this issue and cleared the cache and dalvik cache. I don't see how this could have erased twrp from my device. I currently don't have acces to a computer so I can't use Odin, is there really no way to force shutdown it or something?
Click to expand...
Click to collapse
Enter download mode, once you are in download mode press at the same time power + home + volume down button. As soon as the screen goes black release the volume down button and press the volume up button immediately, then it will boot up to TWRP
Monigote97 said:
Enter download mode, once you are in download mode press at the same time power + home + volume down button. As soon as the screen goes black release the volume down button and press the volume up button immediately, then it will boot up to TWRP
Click to expand...
Click to collapse
HUGE thanks for this!
lvnatic said:
HUGE thanks for this!
Click to expand...
Click to collapse
You're welcome!

Trying to fix a fake S5 = Hell

So, long story short, i have a Galaxy S5 Fake in hands (not mine). But i'm trying to fix it.
I realized soon enough it would be harder than i expected.
This beast comes with trojans all over the rom. So my first thought was , let's wipe it.
After the wipe, everything is installed back, all the junk and trojans.
So i decided to flash using download mode.
Here's how the button combos are set :
Recovery Combo (Power + Home + Volume UP) would send me to a english recovery.
Donwload mode combo (Power + home + volume down) would put me in a chinese recovery instead of download mode.
So... yeah.. no download mode! After a while trying to flash a custom recovery using flashify app i noticed that cwm was successfully installed! But once again... Trying the recovery combo now , would just boot normally and the download mode combo is still in the chinese recovery.
Also trying flashing via fastboot without sucess.
I'm running out of ideas! Any help?
mornaistar said:
So, long story short, i have a Galaxy S5 Fake in hands (not mine). But i'm trying to fix it.
I realized soon enough it would be harder than i expected.
This beast comes with trojans all over the rom. So my first thought was , let's wipe it.
After the wipe, everything is installed back, all the junk and trojans.
So i decided to flash using download mode.
Here's how the button combos are set :
Recovery Combo (Power + Home + Volume UP) would send me to a english recovery.
Donwload mode combo (Power + home + volume down) would put me in a chinese recovery instead of download mode.
So... yeah.. no download mode! After a while trying to flash a custom recovery using flashify app i noticed that cwm was successfully installed! But once again... Trying the recovery combo now , would just boot normally and the download mode combo is still in the chinese recovery.
Also trying flashing via fastboot without sucess.
I'm running out of ideas! Any help?
Click to expand...
Click to collapse
Is there any way i can check if cwm was really installed and is it possible to change the boot script to load it instead of the chinese recovery?
Recover the whole stock status with Odin, then you can flash custom things.
APKCCCP said:
Recover the whole stock status with Odin, then you can flash custom things.
Click to expand...
Click to collapse
how can i flash with odin without download mode?
No point asking about it here, just because they stuck the name S5 on it, doesn't make it an S5, the hardware will be different, ROMs won't work, likely ODIN won't either as ODIN is for Samsung, and it's not a Samsung phone
Find out what hardware is in it, and go from there
mornaistar said:
how can i flash with odin without download mode?
Click to expand...
Click to collapse
Sorry, didn't sleep much.
My fault.
Not even recognized it's not a Samsung.

Categories

Resources