Database Users

SE Tweaker Tool v4.0 [16/2/12] Unlock Bootloader+Kernel Guide X10 minipro|X10 mini X8

SE Tweaker Tool is a Tool + Guide to make some tweaks to ur phone With ease.. For Now it Only Supports X10 mini pro | X10 mini | X8 | W8
Thanks to lucastan96 who brought me to notice that most of the X8 users dont know about this tool which would be Of great help, It originally belongs the X10 mini pro Section. Hope it helps you as it did for others.
lucastan96 will help u if you get stuck anywhere. thanks
This TOOL includes of all the necessary utilities like Root/UnRoot for Xperia U20i and Xperia X8, installing CWM Recovery for FOR Xperia U20i and Xperia X8, UNLOCKING/RELOCKING THE BOOTLOADER FOR X10 mini pro | X10 mini | X8 | W8 With necessary guide [ tried to make it as simple as possible ]
NOTE: Dealing with the bootloader is highly dangerous and can result in a hard brick if you don't follow the proper instructions. Then, you will have to go and repair your phone by sending it to SE. I am not responsible if your phone dies on you because you didn't follow instructions or you screwed up somehow.
Only For people getting error related iscoolbutton.ocx.. Just Run the ocx_fix.bat in the downloaded tool and then Run the SE Tweaker Tool..
For Rooting n stuffs just click it on the ROOT/Unroot button in the tool [Supports Xperia u20i and Xperia X8 for now]
For Unlocking Bootloader read below:
Requirements: Rooted phone, Sony Ericsson PC Companion installed in PC, Courage
You do not need to have a sim lock on your phone to unlock your Bootloader.
Recommended: ----'
-->Disable your Antivirus (it might find a "virus" in ADB.exe even though there isn't one and might even interfere in bootloader unlocking process)
-->USB debugging enabled..
Note: Unlocking the bootloader of your phone will restore the original sim lock of your phone (if you had any) unless if you unlocked with EMMA/IMEI unlock code or it was factory-unlocked or if SE unlocked it! However, some users have reported that using msm7227_semc.cmd on their sim-unlocked phones did not restore the sim lock onto their phone. Unlock the bootloader on your sim unlocked phone AT YOUR OWN RISK!
Download the files needed for the unlock.
Download Flashtool (needed for S1tool to work properly and for loading custom kernels next time) and install it (not necessary if you already have Flashtool):
Download and install Flashtool v0.5.3 here (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the ggsetup-2.2.0.11.exe file inside and install Gordon's Gate.
Then restart your computer... if you dont Find GORDAN'S gate.exe in the drivers folder download it from my attachments ..
Steps To unlock Bootloader: [SUPPORTS X10 mini pro | X10 mini | X8 | W8]
1) After installing Gordans Gate and the flashtool Turn off your phone.
2) Download SE Tweaker Tool AlsoMirror[Mediafire] and unzip it.
3) Run SE_Tweaker_Tool.exe from it.
NOTE: If no flashtool download from the dialog box appeared after running unlockbootloader.exe
4) Turn off ur phone
5) Select unlock_bootloader button.. run S1tool button to check if the your phone has SIM UNLOCK CERTIFICATE.[i.e click on "Do" in s1tool and compare the output]
6) Boot your phone into flash mode (make sure you installed Gordon's Gate and usb debugging is on). All users, press and hold back button while connecting cable from PC to phone. Continue holding back button until you get some output. The LED on your phone should flash green if it is in flash mode.
7) Click on how it should look.. it will give u an idea how the output will be..
NOTE- At this moment you should know if you have SIM UNLOCK CERTIFICATE or what ever the output was.. keep that in mind..
8) Now disconnect[/COLOR] your phone n boot it up.Connect it again to PC (make sure your USB DEBUGGING is enabled and antivirus is disabled)
9) Now click the check box which is right for you [Read them carefully it will be according to the output you got with s1tool] run the corressponding button..
10) After it proceed to check if the unlocking of bootloader was done by clicking Check If your "Bootloader is unlocked And Proceed" button..
11) Reboot your phone to flashmode as before.. Run s1tool.. N compare the output..
If the line RUNNING S1_EROM FROM VER "#8A02$" has a lowercase "r" letter replacing the "#" (RUNNING S1_EROM FROM VER "r8A02$"), your bootloader has been unlocked . If it has an uppercase "R" replacing the "#" (RUNNING S1_EROM FROM VER "R8A02$"), your bootloader is NOT unlocked.
Re-locking the Bootloader Follow the steps in the Tool
DOWNLOAD THE KERNEL WHICH YOU WANT
[Note: If it is downloaded in *.zip or *.rar format just open with any zip tool like Winrar or 7zip tool n extract the *.ftf file to your drive n later put in into the /firmwares folder of flashtool and follow below steps to Flash]
How to flash custom kernels:
Put the *.ftf file in the /firmwares folder. ( flash only the .ftf file.)
1. Open Flashtool.
2. Click Flash.
3. Select (kernel name).ftf.
4. Turn off your phone.
5. Connect your phone in flash mode (only when the popup window prompts for you to do so). (To boot into flash mode, press and hold back button while connecting your phone to the PC using an usb cable).
6. Disconnect your phone (do so only when the popup window to prompts you to disconnect your phone).
7. Reboot and you have a custom kernel!
8. Confirm by going to Settings --> About Phone --> Kernel version. It should have the name of the kernel you flashed.
--> To flash back to stock kernel, download the appropriate file below and follow steps listed above.
X8 (E15) and W8 stock kernel:
Download link: [ X8 & W8 Stock kernel ] as provided by 2010matej
X10 mini pro (U20) stock kernel:
U20 Stock Kernel Download link
X10 mini (E10) stock kernel:
E10 Stock Kernel Download link
For FAQ refer to http://forum.xda-developers.com/showthread.php?t=1254225
CREDITS:
Androxyde and Bin4ry, Blagus, the_laser, maxrfon and of course spyderx.
If you have a problem that is not listed above please post it in this thread
Check the 3rd post for changelog..
DOWNLOAD TOOL --->> SE Tweaker Tool V4.0
also
Mirror[MediaFire]
Hit the Thanks button if the tool was useful..
Only For people getting error related iscoolbutton.ocx.. Just Run the ocx_fix.bat in the downloaded tool and then Run the SE Tweaker Tool..

So does this help with those 11w29+ ??

Okay guys!! From now on, if faiyyaz is busy with his work, when I am around, I will be monitoring this thread, as we agreed before.
P.S: Rohin, nope, having this tool cant gurantee you can succesfully unlock bootloaders past 11w30. (But... with a greater level of success! )
Sent From My W8 Using Tapatalk On MiniCM9 3.0.1

Ah if only there was a way to do it for free

I have 11W34 and successfully unlocked my BL
Currently running minicm9

There is a problem on the batch file on my OS. I tried running as administrator and choose as higher(2nd option) it says file not found but when I run it normally it say access is denied

hey bro harshitgroup, can u briefly describe what method u followed to unlock ur BL on 11W34, please?

fuzzyslk said:
hey bro harshitgroup, can u briefly describe what method u followed to unlock ur BL on 11W34, please?
Click to expand...
Click to collapse
Yeah sure.
I am always willing to help...
Just visit the link below and read every step carefully...
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Wish u good luck...

11 w29 x8
hi thanks for x8 up to 11w29 can be Unlock Bootloader please tell me

yousef-p said:
hi thanks for x8 up to 11w29 can be Unlock Bootloader please tell me
Click to expand...
Click to collapse
Here you go!
http://forum.xda-developers.com/showthread.php?t=1481630
-----------------
- Swift -, formerly known as IrishStuff09

yousef-p said:
hi thanks for x8 up to 11w29 can be Unlock Bootloader please tell me
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=27006502
See here...
Sent From My W8 Using Tapatalk On MiniCM9 3.0.1

my 11w48
how Unlock Bootloader please help me

nice tools...

loveinfire said:
my 11w48
how Unlock Bootloader please help me
Click to expand...
Click to collapse
There will be huge risk of bricking your device if you unlock your device bootloader..so for now don't do it unless you can take the risk..
Sent from my Xperia X8

X8 (E15) and W8 stock kernel:
Download link: [ If anyone could provide ]
Click to expand...
Click to collapse
Stock Kernel
Stock Kernel- torrent file
Stock Kernel for MV Roms is the name, forget "for MV Roms" it's just stock kernel!

2010matej said:
Stock Kernel
Stock Kernel- torrent file
Stock Kernel for MV Roms is the name, forget "for MV Roms" it's just stock kernel!
Click to expand...
Click to collapse
Thanks.. Faiyyaz is quite busy now. We have to wait for him to update the OP.
Sent From My W8 Using Tapatalk On MiniCM9 3.0.1

lucastan96 said:
Thanks.. Faiyyaz is quite busy now. We have to wait for him to update the OP.
Sent From My W8 Using Tapatalk On MiniCM9 3.0.1
Click to expand...
Click to collapse
I send him PM and he answer it!

2010matej said:
Stock Kernel
Stock Kernel- torrent file
Stock Kernel for MV Roms is the name, forget "for MV Roms" it's just stock kernel!
Click to expand...
Click to collapse
Thanks, have uploaded your links to the main thread.

I'm doing this today.Wish me luck.

c903jerk said:
I'm doing this today.Wish me luck.
Click to expand...
Click to collapse
Good luck, but I thought you did it b4 already?
Sent With My Fingernails To Your Eyeballs

[NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pics]

[NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pics]
In a stituation where you are semi bricked or you need to restore your phone to stock on a locked bootloader for warranty reasons, what do you do?
You can flash an FTF in flash tool to restore your phone to stock without losing your data, but downloading from the firmware links can be a pain in the neck with slow downloads and also the firmware to restore your phone to stock may not even be available for your particular device due to branding, country, carrier etc.
You can flash using SUS (Sony Update service) and it will be much quicker plus your firmware will always be available but you will end up losing your data
After reading online i found you can download the official firmware for your specific device using SUS, package it into an FTF then flash through flashtool. And you can keep your data.
Most users may not know how to fully do this and your average noob is probably already lost and confused.
So i created this noobs guide with all you need to know
Stage 1 = Installation
Stage 2 = Getting files to create an FTF
Stage 3 = Creating FTF
Stage 4 = Flashing FTF
PLEASE FOLLOW ALL INSTRUCTIONS CAREFULLY TO AVOID DATA LOSS
Tools required:
1. Flashtool . Latest version can be found here
2. Sony Update Service Direct link to download is here
3. JRE may be required if Sony Update Service doesn't install it for you, can be found here
4. LOCKED BOOTLOADER is required otherwise sony update service will reject your phone.
Currently there is no way to relock bootloader, if you are unlocked you will need to wait till we have a relock procedure
Stage 1 - Installation
Step 1. Install Flashtool using the installer file downloaded above, this should normally install in C:\Flashtool
Step 2. Install Sony Update Service, IT is better if you install it to the directory C:\Sony Update Service\
when it asks you where to install, This will make things easier and quicker when creating the FTF. and this is what i will refer to in this guide
*Step 3. Install JRE ONLY if Sony Update Service fails to install it or it does not run.
Stage 2 - Getting files to create an FTF
Step 1. Load up Sony Update Service, will ask you to accept license whenever you run it with some tips before you start, CLICK START
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 2. Next it will ask you to connect your phone, Switch off your phone, Keep hold of volume down and plug your usb into the phone. Your phone LED will briefly flash Red then Green
Step 3. SUS will tell you, you are already up to date, Tick the box and Click install
Step 4. SUS will ask you to confirm data removal, and inform you all DATA will be lost, CLICK YES
NOTE: You will not lose your data if you click yes and then follow the rest of the instructions,
Step 5. SUS will start to download the official firmware for your device, it will not install anything to your device till it has finished downloading all the firmware,
MAKE SURE YOU KEEP AN EYE ON IT AS SOON AS IT HITS 100%, PULL YOUR USB OUT OF YOUR PC ASAP, RAPID, QUICK, FAST WHATEVER OTHERWISE YOU WILL END UP FLASHING FACTORY FIRMWARE AND LOSE DATA
If you pull it out before 100% the download will stop and you will have to follow steps 1 to 5 again, it will resume from where it left off.
At this point i pulled my USB OUT STRAIGHT AWAY ! BEFORE IT TRIED FLASHING MY PHONE
Your Download will be saved in your C Drive > Sony Update Service > DB > some numbers (mine was 13740270) > blob_fs
But at this point it is not in FTF and will need decrypting
Stage 3 - CREATING YOUR FTF
Step 1. Load up flash tool. Once it has opened, click Tools on the menu bar at the top THEN SUES/DECRYPT
Step 2. Click Browse and select your blob_fs folder we discussed above C: > Sony Update Service > DB> ####some number#### > blob_fs
This will show you 4 files, not sure if some might show more or less, but generally 4 on the left in Available files
Step 3. Click on each file then the arrow to send it to files to convert then click convert, Note if it is not doing anything be patient, Decrypting can take several minutes and it will not update you until each file is fully decrypted.
Step 4. Once it has decrypted, it will automatically bring up the Bundler. Give your FTF a name, Version and Branding, see how i named mine.
Move across everything EXCEPT LOADER.SIN from the folder list on the left to the firmware content on the right using the arrows.
If you include loader.sin then you get an error when flashing with flashtool and flashing aborts! this is why i have requested you do not move/include it
Step 5. Click create, a little box will pop up with devices, just double click on C660X SONY Xperia Z or press ENTER
Step 6. Flash tool will then create your FTF, It will automatically save it in C:\Flashtool\Firmwares and also whenever you load flashtool and flash in flashmode it will show you the one you created.
Stage 4 - FLASHING
Step 1. Load Flash tool if you haven't already done so and click the black lightning icon. Then make sure flash mode is checked and click ok.
Step 2. Click your firmware, this should show up by default, if it doesn't then browse to your firmware folder by clicking browse at the top
Step 3. UNTICK DATA & CACHE under wipe if you would like to keep your data
otherwise leave it ticked if you want to restore everything to stock and lose data as well
Step 4. Click Flash and then Flashtool will ask you to connect your phone in flashmode
Power off your phone if it is not already off, Hold Volume down button and then plug your USB in
Step 5.Wait for it to flash then disconnect your phone and boot, Note: keep hold of power button till it vibrates once then it should boot up.
I just recovered from a semi brick/bootloop while testing Krabappels recovery for locked bootloaders.
Successfully downloaded from Sony Update Service within 20 minutes, created the FTF and then flashed the phone without losing my data. Firmware links on the forum were showing 1 hour or more to download
Phone is back to normal and working with all my data and settings still there.
Don't forget to click thanks if this helped
As this is my first Xperia device i have worked on. (X10 was always stock) Credits go to: Androxyde, Bin4ry, Krabappel2458, DooMLoRD for all they have done and are doing!

Reserved for future use

How to download for unlokced Bootloader
Hi,
I tried your method for SUS to download my correct firmware. But I got an error saying you can use SUS as you are using a modified system. How do I proceed to get the correct firmware to relock and restore to stock
Francis.

fesar said:
Hi,
I tried your method for SUS to download my correct firmware. But I got an error saying you can use SUS as you are using a modified system. How do I proceed to get the correct firmware to relock and restore to stock
Francis.
Click to expand...
Click to collapse
Have you unlocked your bootloader?
You can only use SEUS or PC Companion if your bootloader is locked.

Re: [NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pic
yes sorry I forgot to mention you will need to relock before you can. Sorry I forgot about that. I'll update post 1.
There is no way to relock yet. You will need to wait till a relock procedure is found below you can run this
Sent from my C6603 using xda premium

Re: [NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pic
You can relock bootloader using latest version of flashtool.
I have tested that it works, by relocking and unlocking a few times.
It may say rooting status: unknown after relocking, but that may just be me as I relocked on the older version of flashtool . Not seen anyone else say there's say unknown after using flashtool to relock.
Sent from my C6603 using xda app-developers app

Worked 100%, although when I disconnected cable at download completed, my phone wouldn't start. Kept getting sony logo and red light. Ended up going through the whole update process to get the phone on.
All good though now and have the FTF file to use incase anything happens in the future =)
Thanks VIPER. Your guide helped me on the Sensation and has helped again over here!!!

Re: [NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pic
ajay83 said:
Worked 100%, although when I disconnected cable at download completed, my phone wouldn't start. Kept getting sony logo and red light. Ended up going through the whole update process to get the phone on.
All good though now and have the FTF file to use incase anything happens in the future =)
Thanks VIPER. Your guide helped me on the Sensation and has helped again over here!!!
Click to expand...
Click to collapse
Thanks I'll update post one regarding the red light. It's handy having that FTF. It's from a trusted source, you know it is for your phone without a doubt as Sony would not use the wrong firmware. Lol otherwise everyone would use it to debrand.
And it didn't take forever to download. Hopefully I'm going to be more active in the Z forum. Thanks for your feedback
Sent from my C6603 using xda premium

Re: [NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pic
Hey Viper, sorry for the n00b question but this is my first Sony phone. I have a three locked handset if I follow your guide above this will make a backup of my firmware incase of warranty purpose, right? Then I can flash an unbranded firmware to remove three branded stuff yes?
As I said sorry for n00b questions lol
Sent from my C6603 using Tapatalk 2

Re: [NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pic
maverick1103 said:
Hey Viper, sorry for the n00b question but this is my first Sony phone. I have a three locked handset if I follow your guide above this will make a backup of my firmware incase of warranty purpose, right? Then I can flash an unbranded firmware to remove three branded stuff yes?
As I said sorry for n00b questions lol
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
Yes
Sent from my C6602 using xda premium

Re: [NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pic
gm007 said:
Yes
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Cheers :thumbup:
Sent from my C6603 using Tapatalk 2

Re: [NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pic
maverick1103 said:
Hey Viper, sorry for the n00b question but this is my first Sony phone. I have a three locked handset if I follow your guide above this will make a backup of my firmware incase of warranty purpose, right? Then I can flash an unbranded firmware to remove three branded stuff yes?
As I said sorry for n00b questions lol
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
Just to clarify further. It would be three firmware. Three would be pised off if sony unbranded everyone lol. They have carrier agreements. So your ftf would be three branded
Sent from my C6603 using xda premium

Re: [NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pic
xl VipeR lx said:
Just to clarify further. It would be three firmware. Three would be pised off if sony unbranded everyone lol. They have carrier agreements. So your ftf would be three branded
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Well the backed up firmware would be three branded, but I can still then flash an unbranded firmware right?
Sent from my C6603 using Tapatalk 2

Re: [NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pic
maverick1103 said:
Well the backed up firmware would be three branded, but I can still then flash an unbranded firmware right?
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
Yes you can but you got the three firmware there for warranty reasons
Sent from my C6603 using xda premium

Great Tutorial
This really helped, my flash just finished (was stuck at sony logo). Now rebooting.
you're my hero!
kind regards,
boris slaghuis

Just one question, can I skip the kernal in the FTF? or the kernal is a must item for the FTF?
million thanks, now I have the most updated FTF for backup in case there are issues. But just to let all knowing that even unplug the phone when the downloading is completed, I have to flash the phone (just can't boot up normally).

Re: [NOOBS GUIDE] Create your own stock firmware FTF & Flashtool flashing guide[+ pic
Asome I managed to do this, but after I did it when I pulled out USB when at 100% , tried to boot phone ended up in boot loop !!!!???? So had to put in fresh install,could not even get cwm to boot but I had back up made any one else have this prob ??
Sent from my LT18i using XDA Premium HD app

hi i tried your method but its creating a FTF of only 14 MB
EDIT: solved

Thank you very much Viper!!! I manage to de-brand my XZ. because of your method Thank you once again!

Thank you for the guide!
I do have a question, if i get an update in SUS like .434 most recently and update my phone and extract the .ftf file from that.
Will that work aswell or is there something diffrent with the fulll "factory data reset flash"?
I did a ftf from the update and then compared filesize from NL ftf and it differs in filesize, NL generic is 720MB and my Nordic unbranded ftf is 712MB.

[Ultimate Guide] Installing / Rooting / Self-Customizing Stock Rom 4.2.2 / 1 [13/08]

To Being with Lets make this guide in three sections
[Post 1] General Instructions
[Post 2] Installing Stock Rom 4.2.2
[Post 3] Rooting Your Device
[Post 4] Customize your ROM as per your wish
General Instructions
Introduction
Rooting your new purchased android device is leg shaking... Main reasons of rooting is to remove bloatwares, gain power of your own device with full potential, install root application and of course Custom Roms. Flashing with custom images will increase your flash bin counter and this breaks your warranty. So people avoid rooting but thanks to chainfire, reset of this counter is made easy as having nuts...
Before moving ahead let me explain what’s rooting...
Rooting your android device simply means you are enabling administrator rights for yourself!! To be more precise unrooted device restrict user and we use our phone as a guest account like in windows OS.
Warnings:
This ROOTING Steps are foolproof but Rooting means you are playing with systems, so please don't try if you don't know what you are doing...Hence it can brick your device (DEAD) and make it useless... So read the steps completely before proceeding..
Rooting is for your fun not for any legal issues viz, piracy.
Charge your phone well before proceeding.

Installing Stock Rom [e.g. 4.2.2]
Installing Stock Rom [e.g. 4.2.2]
Requirements
1. A well charged Galaxy Grand
2. A computer
3. A USB cord (better one, not that Samsung. Its dam slow. But if you can work with it than no problem. But I personally hate it. I use BlackBerry cord)
4. [ROM flasher] Odin from here
5. And download rom, currently get 4.2.2 it from -
For ROM with one file, Use PDA button and add that file!!
Edited: flash official rom and wipe everything in recovery after flashing.
Hotfiles Courtesy @sammobile
Filecloud Courtesy @danierakes
For latest ROM mirror - here. Courtesy @BEingNiCK
Note: If another update comes than find it here Samsung Updates
So seems you have all 5 required items,
Let’s Begin,
Steps to Installing Stock Rom
Step 1. Switch-off you device and sleep... Lol, kidding... Turn off the device.
Step 2. Enter into the download mode [Volume down + power button + home button (Together, at same time)] release these buttons when logo GT-i9082 appears
Step 3. Start Odin software on your pc
Step 4. Connect your device to pc with the USB cord. (Make sure these settings are ticked, if properly connected...#: [Com#] will get activated.)
So now you need to select proper and specific files into Odin (Stock rom files) please look the image well before flashing...
Here it is for your convenience, look at the colours.
Odin button ----- File Name
PDA ----- CODE_I9082XXXXXXXXXXXXX.tar.md5
Click to expand...
Click to collapse
http://i899.photobucket.com/albums/...ms-using-odin-for-windowsw654_zps646eb37a.jpg
Once all the files are set than click start... wait till the Odin status says PASS
You are done!!
Congratulations... You successfully flashed you device.
If you want to root than GOTO [Post 3] Rooting Your Device

Rooting Your Device
Rooting Your Device
Alternatively, You can use Custom roms by @balliboxer, @k2wl, @adityaf..... which can be found in Galaxy Grand Duos i9082 Android Development
Requirements [CWM]
1. A sufficiently charged Galaxy Grand
2. A computer
3. A USB cord (better one, not that Samsung. Its dam slow. But if you can work with it than no problem. But I personally hate it. I use BlackBerry cord)
4. [ROM flasher] Odin from here
5. And download CWM from pawitp or by @Mohanshbhr or you can follow method by @chotu222
6. Download SuperSU (place this file in your memory card) from here by the God of Rooting @Chainfire
Steps
Step 1. Switch-off you device and sleep... Lol, kidding... Turn off the device.
Step 2. Enter into the Download Mode [Volume down Button+ power button + home button (Together, at same time)] release these buttons when logo GT-i9082 appears
Step 3. Start Odin software on your pc
Step 4. Connect your device to pc with the USB cord. (Make sure these settings are ticked, if properly connected...#: [Com#] will get activated.)
Look at the image and flash your CWM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unplug the USB cord only after the ODIN status SHOWS PASS Status (Very Important)
Congratulations... you have a cwm recovery... It’s a GATE to flash your SuperSU.
Step 2. Turn-off your device and Enter into the CWM Recovery Mode [Volume UP Button+ power button + home button (Together, at same time)]
This is how CWM looks like
So now it’s time for flashing SuperSU Zip file which you downloaded from here http://forum.xda-developers.com/showthread.php?t=1538053
Now select options as the image;
Reboot the device and you will gave SuperSU app, test it by root checker app (from playstore) if you want to test.
Congratulations... You rooted your device successfully...
If you want to customize than Go to [Post 4] customize your ROM as per your wish

Customize your ROM as per your wish
Here, the important app is Titanium Backup, which will help you to remove unwanted apps pushed by Samsung.
Be careful, follow this thread http://forum.xda-developers.com/showpost.php?p=39395506&postcount=604 and remove unwanted apps.
So now your phone is having more RAM, more battery life and lag-free like other custom roms. zipaligned, deodex is for saving space in our device and for themes.As I observed, some people don't trust custom ROM and they want safety over theme and other Custom rom benefits. So guys its your own ROM! Enjoy!
The Ultimate customizer!! ​
Wanam Xposed
Description
NOTE:
- It Requires Root Access
- It Requires Xposed Framework: http://forum.xda-developers.com/showthread.php?t=1574401
DOWNLOAD HERE
--------------------------------------------------------------------------------------------
It’s your own customized ROM, Again congratulations...
For more browser through following threads, these are for 4.2.2. Where as for 4.2.1, there are many threads here...
[App/Port][MOD] Xperia Home 5.0 Launcher for Galaxy Grand
Xperia Z keyboard for grand [All Roms]
[Tutorial] [DPI] How I made my Grand Duos look Awesome than any other Grand Device
[APP][PHOTOSPHERE WORKING ON 4.2.2]New Android 4.3 camera and gallery app
[GUIDE][MOD][GT-i9082/L]_OPTIMIZE DPI 5''_UP 6.6.2013(2 pictures:notifications)

Important Links!
[GUIDE] EFS Backup and Restore for Galaxy Grand i9082 and i9082L By @xenon92
EFS is a system folder in the root directory of your phone that contains very important and basic information about your device's identity like Wi-Fi MAC address, Bluetooth MAC address and the MOST IMPORTANT - IMEI address (nv_data.bin).

May I add.....
Instead of installing super su, one can proceed and flash Balliboxer 4.2.2 rom thru cwm. That way you get root plus zipaligned, deodex or odex.

bongski55 said:
May I add.....
Instead of installing super su, one can proceed and flash Balliboxer 4.2.2 rom thru cwm. That way you get root plus zipaligned, deodex or odex.
Click to expand...
Click to collapse
Yes that's good option, but is for self-customized ROM. Few of my friends Questioned me that they dont trust Customized ROMs. People who dont trust custom ROM can finally customize as per their need.

Nice thread, it will help beginners a lot.
But the link you gave that tells which apps can be removed is not very accurate, there are actually many other apps that can be removed safely.
I had made a post about it, but it was for 4.1.2.
Check it here:
http://forum.xda-developers.com/showthread.php?p=39395506
It should be more or less the same for 4.2.2 but anyway, as soon as I get 4.2.2 I'll make a new post about safe to remove apps. For now I wait for a better version, cuz the current one seems to be full of bugs and many people are disappointed with it to the extent that they downgrade back to 4.1.2...
With all those apps removed when I start my phone I have like 160 mb RAM consumption, and now that I'm using it I just checked, I have 213 mb only...

unclefab said:
Nice thread, it will help beginners a lot.
But the link you gave that tells which apps can be removed is not very accurate, there are actually many other apps that can be removed safely.
I had made a post about it, but it was for 4.1.2.
Check it here:
http://forum.xda-developers.com/showthread.php?p=39395506
It should be more or less the same for 4.2.2 but anyway, as soon as I get 4.2.2 I'll make a new post about safe to remove apps. For now I wait for a better version, cuz the current one seems to be full of bugs and many people are disappointed with it to the extent that they downgrade back to 4.1.2...
With all those apps removed when I start my phone I have like 160 mb RAM consumption, and now that I'm using it I just checked, I have 213 mb only...
Click to expand...
Click to collapse
Post linked. Please share your list for 4.2.2 too.
Thanks.

DBZo07 said:
Post linked. Please share your list for 4.2.2 too.
Thanks.
Click to expand...
Click to collapse
I will, but I wait for a decently working 4.2.2, I'm not a very patient person and I hate bugs

unclefab said:
I will, but I wait for a decently working 4.2.2, I'm not a very patient person and I hate bugs
Click to expand...
Click to collapse
Trust me its stable.

Just a query sir? can this also be applied to I9082L?

howi_89 said:
Just a query sir? can this also be applied to I9082L?
Click to expand...
Click to collapse
Yes. If u have right files for your device.
This guide will remains same for almost all the Samsung device, provided that you have appropriate files for stock rom and cwm for that device.
Sent from my GT-I9082 using Tapatalk 4 Beta

DBZo07 said:
Yes. If u have right files for your device.
This guide will remains same for almost all the Samsung device, provided that you have appropriate files for stock rom and cwm for that device.
Click to expand...
Click to collapse
got it sir... what I mean to say is the ROM that I have downloaded from the link u gave... can I use that? im here in the Philippines.. tnx!

Nope, not yet.. 4.2.2 is not released for your i9082L

is this update ok for European phone
DBZo07 said:
Installing Stock Rom [e.g. 4.2.2]
Requirements
1. A well charged Galaxy Grand
2. A computer
3. A USB cord (better one, not that Samsung. Its dam slow. But if you can work with it than no problem. But I personally hate it. I use BlackBerry cord)
4. [ROM flasher] Odin from here
5. And download rom, currently get 4.2.2 it from -
Hotfiles Courtesy @sammobile
Filecloud Courtesy @danierakes
For mirror get it here. Courtesy @BEingNiCK
Note: If another update comes than find it here Samsung Updates
So seems you have all 5 required items,
Let’s Begin,
Steps to Installing Stock Rom
Step 1. Switch-off you device and sleep... Lol, kidding... Turn off the device.
Step 2. Enter into the download mode [Volume down + power button + home button (Together, at same time)] release these buttons when logo GT-i9082 appears
Step 3. Start Odin software on your pc
Step 4. Connect your device to pc with the USB cord. (Make sure these settings are ticked, if properly connected...#: [Com#] will get activated.)
So now you need to select proper and specific files into Odin (Stock rom files) please look the image well before flashing...
Here it is for your convenience, look at the colours.
Once all the files are set than click start... wait till the Odin status says PASS
You are done!!
Congratulations... You successfully flashed you device.
If you want to root than GOTO [Post 3] Rooting Your Device
Click to expand...
Click to collapse
Yhe question is in the titlle :
Ok for european phone ?

guims78 said:
Yhe question is in the titlle :
Ok for european phone ?
Click to expand...
Click to collapse
This tutorial is for i9082. What is your model number
Sent from my GT-I9082 using Tapatalk 4 Beta

..well, i'll just have to wait then...
thanks anyway sir...

PROBLEM in 4.2.2 ROM
Hello everybody,
I am facing some problems after installing ROM 4.2.2
1. Proximate sensor is not working for call. (as i take the phone to my ear it is not calling to the contact.)
2. Contact display is not correct. eg. When i type "Ra" then i got 6 contacts like : Rahul, Rahul, Rahul (SIM), Raj, Raj (SIM), Rajesh.
Now when I choose the contact "Rahul (SIM) then it is not Rahul it is Raj. :crying:
All contact are displaying like this.
3. When i got new sms then it shows only new sms received. Not showing the name of sender... :crying:
Help me frnds.... plzzzz

fageria said:
Hello everybody,
I am facing some problems after installing ROM 4.2.2
1. Proximate sensor is not working for call. (as i take the phone to my ear it is not calling to the contact.)
2. Contact display is not correct. eg. When i type "Ra" then i got 6 contacts like : Rahul, Rahul, Rahul (SIM), Raj, Raj (SIM), Rajesh.
Now when I choose the contact "Rahul (SIM) then it is not Rahul it is Raj. :crying:
All contact are displaying like this.
3. When i got new sms then it shows only new sms received. Not showing the name of sender... :crying:
Help me frnds.... plzzzz
Click to expand...
Click to collapse
1 & 2 known bugs for some working fine for some not
1. get app from play store( workaround )
2. flash s4 contacts app or use alternative
3. Message > Settings > Notifications > check preview message

[Guide] How to use Flashtool

Hi everybody welcome to my tutorial about Flashing with Flashtool. This thread is for those who want to reflash their device back to Sony Stock. See below for last details about this thread and the last build by Sony.
Note: I DO NOT OWN THIS DEVICE ANYMORE. PICTURES ARE REMOVED FROM MY DROPBOX AND THUS NOT VISEBLE. FOR NOW JUST RELY ON THE EXPLANATION PLEASE. ANY QUESTION CAN BE ASKED HERE. I DO NOT RESPOND TO TECHMAIL!
Created: 23-02-2014
Updated: 05-07-2014
Latest Android build released by Sony: 12.1.A.1.205
Let's begin shall we.. We shall!
First you need to download the correct ftf file for your device/operator or needs. This can be done here: http://forum.xda-developers.com/showthread.php?t=2311964 In there you can share and download firmware files in .ftf format..
You alsol need a program called Flashtool. You can download this here: http://forum.xda-developers.com/showthread.php?t=920746
For Windows 8 and 8.1 users I also recommend you to read this thread: http://forum.xda-developers.com/showthread.php?t=2095087 Microsoft has enhanced the security in Windows 8/8.1 and Windows won't install proper signed drivers.
When you are done with that you need to move your downloaded firmware file to the proper location for flashtool to be found:
C:\Flashtool\Firmwares
After that you are good to go, just remember the following:
Bootloader locked? If not you wont have BE2/OTA/PCC etc (for unlocking and relocking: http://forum.xda-developers.com/showthread.php?t=2354721 )
I've made backups of my important files that are stored on my phone?
Battery at atleast 50%?
I have patience?
I got something to do meanwhile?
The last two things are very important
Let's get started:
1: Open Flashtool:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashtool(.exe) for 32Bits systems and Flashtool64(.exe) for 64Bits systems
2: Press the Lightningbolt picture and select Flashmode
This will give another screen.
3: Select the downloaded ftf. (In this case 2.254)
Make sure that all the wipes are checked and the others are unchecked. This is to prevent any bootloops or other problems after downgrading.
4: Press Flash and the next two lines will be added to the flashtool log
The files are being prepared and checked. Have a bit of patience please.
5: Turn off your phone and turn it back on into Flashmode
After this the process will start.
After flashing you can disconnect your phone and boot it up.
Via Flashtool you can also reset your system after. For example:
You are running the latest ExistenZe ROM from our beloved Niaboc79 and you want to go back to stock for a reason WITHOUT losing data! Just flash the last Stock ROM and untick the following boxes:
Untick DATA and APPSLOG!! But keep CACHE to wipe the /cache (is the same as a wipe cache via CWM).
FAQ​
- My Phone wont stay into flashmode
> Turn it off, wait a few minutes and turn it back into flashmode
- Flashtool wont recognise my phone
> Make sure you have the proper drivers installed. See C://Flashtool/Drivers
- Flashing failed
> Problem depends on the error code given by Flashtool. Post the problem here and perhaps we can help
- Got a bootloop
> Reflash again
- Even after reflash I got into a bootloop
> Turn off your phone via the small button behind the batterycover and wait a few minutes. Then try again. If that doesnt work you need to flash again.
- Booting takes ages
> This is normal. The entire cache needs to be rebuild. Patience my dear..
- After flashing and booting my phone is laggy.
> Reboot device and wait a bit. The phone needs to fully reset and boot itself. Have some patience dear.
- Do I need to unlock my bootloader to use flashtool
> NO!
- Can I unlock my bootloader with flashtool?
> NO!
- Can I relock my bootloader with flashtool?
> Yes

> Reserved by me

downgrade to root?
first, thanks! Very nice guide. I'm new to the experia world, my previous phone was a Desire S.
I have a question:
I have a problem with all stock roms with the mediaserver process. It is always running while I listen to music (which is a lot of time) and drains a lot of battery (up to 65%). Though I use poweramp player which is totally independent of the process (own library and decoder). On my Desire S on CM11 I don't have the issue this is why I want to move to a custom rom. I'm on 4.3 now (was hoping this would fix the issue) and want to root and full backup with keys for warranty purposes and then move to a custom rom.
Is it right that I have to downgrade first, since there is no root for 4.3 yet? If yes, what ROM? I have a C5303 and don't know what version I had previously. I bought it in Switzerland without SIMlock or any branding. Is there a way I can find out what my previous version was or can I basically just use any generic C5303 version?
Would you recommend 12.0.A.1.284 in order to be able to use DoomLords rootkit: http://forum.xda-developers.com/showthread.php?p=42701183#post42701183 ?
It's just that I don't know if I ever was on this version, also regarding warranty...
I know, many questions, but I just reached a point where I don't seem to get further without asking. Hope someone can clarify some of them.
Thanks in advance!
EDIT: And also I was wondering: In the picture says flashmode is reached by pressing the back button while connection, but there are softkeys. Is it not done with volume down?

mrjraider said:
Small changes.. @ moderators Is it possible this can become a sticky?
Click to expand...
Click to collapse
+1 for a sticky!
Nice done!

TheMorpheus said:
+1 for a sticky!
Nice done!
Click to expand...
Click to collapse
after flashing done
i have to turn on phone & make usb debugging & unknown source option check
but whenever i am going to boot it again reboot after colour bootscreen
i had tried number of times flashing again & again
i am attaching my flashtool log file also
Azhar

According to the log you attached everything went fine. So I dont understand the problem.
Perhaps an idea to redownload it? Sometimes it wont work properly because the ftf file is somewhat damaged..

I have to relock the bootloader before restore?
Edit
No, it's not needed!

reflashig stock rom
Thanks for this nice guide. Im having a lot of issues with the 4.3 rom.
I flashed via SUS, editing build.prop to let the phone detect the new version, because my phone is carrier locked, and they didnt released the update yet.
I have a lot of lag, and I must force reset lots of times, so I want to make a clean install, because last time I only updated.
So my question is, if I do a factory reset, my build.prop is going to change to the original file (Orange's rom) or ill keep with my modified file? (Stock center Europe)
What do you recommend to me? If I reflash a stock European ftf via flashtool, I'll have the stock's build.prop, and I'll receive those Ota updates without problem?
Thanks for your work!

No if you have a TA backup you need to reflash your ROM and Restore TA partition

mrjraider said:
No if you have a TA backup you need to reflash your ROM and Restore TA partition
Click to expand...
Click to collapse
I don't have the backup, because my phone has the bootloader locked, and the only thing I have done is root and editing build.prop to be able to upgrade to European 4.3. Everything is working for me, track id and BE. (btw I have a backup of my build.prop in the computer)
I only want to do a fresh install of 4.3, not my carriers rom, because is on 4.1.2
So can I reflash any Stock 4.3 rom? The rom has it's own build.prop?
Thanks for your help Mrjraider

diolo said:
I don't have the backup, because my phone has the bootloader locked, and the only thing I have done is root and editing build.prop to be able to upgrade to European 4.3. Everything is working for me, track id and BE. (btw I have a backup of my build.prop in the computer)
I only want to do a fresh install of 4.3, not my carriers rom, because is on 4.1.2
So can I reflash any Stock 4.3 rom? The rom has it's own build.prop?
Thanks for your help Mrjraider
Click to expand...
Click to collapse
Yes you can. Simply download the ftf file and follow the steps in the OP

Hi mrjraider,
Many thanks for the guide!
A quick question. I am now in 4.3, bootloader locked. If I downgrade to 4.1.2 (.254 for example) my bootloader is still locked, correct?
Thanks!

Yes

I want to go back to stock from AOSP ROM and I don't know what's the right .ftf file for 12.1.A.0.266 but I think I know the right file for 12.0.A.2.254 (German branded C5303) (I'm from Germany ). If I would flash the 12.0.A.2.254 .ftf file would the Update Center show me the 4.3 OTA update and everything would work like on stock before? And would I lose root even with Voodoo OTA RootKeeper and the option enabled to try keeping Superuser access in SuperSU?

You need to look in the thread I linked to. There you can find many FTF files.

mrjraider said:
You need to look in the thread I linked to. There you can find many FTF files.
Click to expand...
Click to collapse
I know I already looked there but I'm not sure which one is right, because I didn't see a generic one for all C5303 and I don't want do have a foreign branding
Edit: found it, sorry
Gesendet von meinem Sony Xperia SP C5303

hey bro, am looking for Sony C5303_12.0.A.2​.254 tft generic global or CE version also UK version ,am unable to find them . I have being searching xda and a found a link that is broken,so please if any one can help.Thanks in advance.:fingers-crossed:

desmond462 said:
hey bro, am looking for Sony C5303_12.0.A.2​.254 tft generic global or CE version also UK version ,am unable to find them . I have being searching xda and a found a link that is broken,so please if any one can help.Thanks in advance.:fingers-crossed:
Click to expand...
Click to collapse
Do not ask for ftf files in here. There is a proper thread for this
Normaly I would help but the chances of getting an older update is decreasing every day since the update of Sony has rolled out a few weeks ago

Well done ! Rollback firmware 4.3 to 4.1
Hi guys ! thanks for guide. I got successfull revert my phone from update 266 to 254.

hi sir, i'm on .254 rooted and just want to go back to stock because i want to update it to 4.3, is it the safest way? if so, what will happen to my apps like greenify, Titanium backup, and those apps that was already transferred to sd card? should i have to uninstall these aps? does it have remaining unwiped data to be cleaned if flashing the stock rom?
thank you..

[ROOT 4 Dummies] How to root and update for Locked Bootloader devices [For any OS!]

Root 4 Dummies
I've FINALLY bought a Tab Z (SGP321) and the day I got it, it took me almost 3 hours to slap root on it and install the prerooted KitKat package from @ryany67 (Based on my DIY Guide, so it was a no-brainer for me, really ).
It helps to know your way around XDA but also around Xperia devices in general I was contacted by some users quite fast after I thanked ryany67 to help them root their tablet Z... I decided to do a thread on the subject instead of sending individual replies which would be basically the same.
The reason why I do this thread is simple: it took me ages to find anything in the form of a 'Root4Dummies' on locked bootloader devices. So here it is:
Preparation
To start, download these files, appropriate for your device type:
[FTF] SGP321 10.1.1.A.1.307 Unbranded
[FIRMWARE][SGP311] 10.1.C.0.370 US Version
[FIRMWARE][FTF][SGP312]10.1.C.0.370 (UK version 32GB WIFI Unbranded)
Missing links: SGP351 and the JB 4.1.2 version for the DoCoMo version. If you have a link, please post it!
TabZ-lockeddualrecovery[any version online].installer.zip on [NUT]'s XDA Downloads
The latest FlashTool
The Dummie guide
Make sure you have created a backup of EVERYTHING on your device, which includes internal storage. The Backup & Restore app on your device does a decent job...
WARNING: I won't be responsible for your neglect to make a backup of your sister's wedding photo's you might have lost by following this guide!!
Put the FTF for your device in the flashtool 'firmwares' folder;
Unzip the TabZ-lockeddualrecovery[any version online].installer.zip and remember where you've put it
Power down your device;
Grab your USB cable and connect it to your PC/MAC ONLY;
Start thinking of what you might have forgotten to backup, because the next step will DESTROY ALL CONTENTS ON YOUR DEVICE;
Are you absolutely sure anything important has been moved off the device?
Did I mention the next step will wipe your device clean? The contents of your external SDCard (the one in the external slot, duh) will not be touched.
Are you sure you want to continue?
Okay... here we go:
Start FlashTool, click the lightning bolt button, choose flashmode and click the firmware you have put in the firmwares directory.
We will be flashing EVERYTHING and will wipe EVERYTHING on your device, this way you will be sure the result will be as clean and stable as possible. You can continue up until FlashTool instructs you to connect the device in flashmode.
HOLD the VOLUME DOWN button on your device and while doing that connect the USB cable to it. You should see the LED light up green and FlashTool should start flashing the FTF. Once FlashTool is done, disconnect the USB cable.
Power up your device, go through the initial setup until you can use it.
Go to settings -> about device -> tap the Build number about 7 times until you unlock the developer menu.
Go back one screen and open the developer options, enable it and search for 'USB Debugging'. Tic the box, confirm the choice.
Connect the USB cable
Open the XZDualRecovery 'lockedbootloader' folder and start the install.sh (linux and mac) or install.bat (windows)
Run option 3 (Installation on an unrooted ROM)
Your device will reboot itself when it's done and will go to PhilZ Touch Recovery for the first time to show you it worked OK.
When you tap reboot PhilZ will ask if you wish to root your device, you can confirm you want to if you like Otherwise flash the latest SuperSU yourself.
Congratulations, this part is DONE! You now have a rooted device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I already hear you cry out: But wait... it's ROM is WAAAAAAY old now!
You are correct of course
The next step will allow you to update to a more recent one while keeping root and not unlocking your bootloader in the process! :victory:
The choices....
It really boils down to personal preference but you can use all of the RECOVERY FLASHABLE ROM's you can find in the Xperia Tablet Z Android Development forum section. Just make sure you get the version for your device to avoid hardware malfunction.
If you want to make a backup of your TA partition, now is the best time to do it, as you have root now. Have the tool from @DevShaft do it for you: [TOOL] Backup TA v9.10 for Windows [20131228]
After creating a backup of your TA partition you can unlock the bootloader to be able to flash any of the ROM's on the Xperia Tablet Z Original Android Development forum section.
All Done!
Well... that's all folks! :victory:
Happy rooting and remember to have fun! :highfive:
Feel free to ask me questions in this thread about rooting and rooted apps, I'll try to answer them to the best of my knowledge. If you see someone asking something you know the answer to, don't hesitate to reply!!

Thanks to your guide and help, I was finally able to Root my Device.
You are the BEST [NUT]!
Grazie from Italy

the perfect root 4 dummies like me is a one click rooting method .......
I lost my galaxy s2 while rooting and flashing that I do not take anymore chances.....
(I am not a millionaire to buy phone or tablet like a chocolate bar lol)
good work anyhow...
DoomLord did this before for this tab I do see why it cannot be done again ....

Don't need it at the moment, but could have done with it last week
Glad you have a Tab Z though!
Thanks for the info in one place.
Cheers

MikeViller said:
the perfect root 4 dummies like me is a one click rooting method .......
I lost my galaxy s2 while rooting and flashing that I do not take anymore chances.....
(I am not a millionaire to buy phone or tablet like a chocolate bar lol)
good work anyhow...
DoomLord did this before for this tab I do see why it cannot be done again ....
Click to expand...
Click to collapse
Maybe so, but for that to happen we need a very bad bug to exploit...
This guide works with what we have. Using a similar way I am able to restore my Xperia Z, Z1 and Z2 from a soft-brick to working fine within 30 minutes.

Nice guide, @[NUT] ... Do you plan on building a custom kernel for stock ROMS (I'm asking this but I don't even know if you make kernels)? The Tablet Z is in a serious need of one. I'd try one myself, but I haven't had time for a while...
Sent from my SGP311 using Tapatalk

Felimenta97 said:
Nice guide, @[NUT] ... Do you plan on building a custom kernel for stock ROMS (I'm asking this but I don't even know if you make kernels)? The Tablet Z is in a serious need of one. I'd try one myself, but I haven't had time for a while...
Sent from my SGP311 using Tapatalk
Click to expand...
Click to collapse
Been talking to @DooMLoRD about an unofficial doomkernel... We'll see what the future brings....

easy and nice steps! thanks!
after root, I updated to 4.4.2, everything is smoother :good: